Pd/Co3O4纳米颗粒负载于Al2O3纳米片高效催化甲烷燃烧

We report an efficient catalyst composed of ternary components prepared by inlaying Pd/Co₃O₄ nanoparticles in alkaline Al₂O₃ nanosheets for catalytic oxidation of methane. Pd/Co₃O₄ inlaid in alkaline Al₂O₃ exhibited a higher ability to break the C-H bond of methane than Pd/Co₃O₄ supported on SiO₂, ZrO₂, CeO₂, and acidic or neutral Al₂O₃. Our results show more oxygen vacancies and higher amounts of surface adsorbed oxygen on the surface of Pd/Co₃O₄/alkaline Al₂O₃ than on other catalysts, which is responsible for methane activation and conversion. Further, the Pd/Co₃O₄/alkaline Al₂O₃ catalyst can almost restore to its initial value in the absence of water when 5% (volume fraction) vapor water was cut off, although a decrease in activity occurred when water vapor was introduced to the reaction system. Even under a condition similar to the exhaust of a lean-burn natural gas engine, the catalytic performance of the Pd/Co₃O₄/alkaline Al₂O₃ catalyst is excellent, that is, methane could be completely converted when the sample temperature in the reaction atmosphere was ramped to 400℃.     

NbCl5 as an Efficient Catalyst for the Synthesis of 1,5-Benzodiazepine Derivatives

1,5-Benzodiazepine derivatives were synthesized in moderate to excellent isolated yields by the condensation reactions of o-phenylenediamine and ketones catalyzed by NbCl₅ under mild conditions using n-hexane as solvent at 50°C. This method is simple and effective with good yields.     

Basic Ionic Liquid as Catalyst for the Efficient and Green Synthesis of 2-Amino-3-nitrobenzonitriles in Ethanol

A basic ionic liquid, [BmIm]OH was used as catalyst in the cyclocondensation of various kinds of vinylmalononitriles with nitroolefins in ethanol at reflux. A series of 2-amino-3-nitrobenzonitriles were obtained in reasonable yields. The straightforward and green protocol was found to be fairly efficient, and the catalyst could be recycled and reused in subsequent reactions with consistent activity. The mechanism of the reaction was discussed.

Green Synthesis of Imidazole Derivatives via Fe3O4‐MNPs as Reusable Catalyst

In this research, a one‐pot, efficient, and high yielding procedure for the synthesis of imidazole derivatives is investigated. The procedure was carried out via multicomponent reaction of isothiocyanate, alkyl bromides, N‐methylimidazole, and triphenylphosphine in the presence of magnetic iron oxide nanoparticles (Fe₃O₄‐MNPs) as reusable catalyst under solvent‐free conditions at 50°C. Also, Fe₃O₄‐MNPs were produced using green synthetic method by reduction of ferric chloride solution with Clover Leaf water extract. The nanoparticles generated using this procedure can potentially be important in different purposes such as organic synthesis. Easy, simple, rapid, and clean procedures for the synthesis of imidazole derivatives are the advantages of this study.     

InCl3·4H2O Promoted Green Preparation of Xanthenedione Derivatives in Ionic Liquids

Xanthenediones derivatives have attracted considerable interests in recent times because they constitute a structural unit in a number of natural products1 and have been used as versatile synthons due to the inherent reactivity of the inbuilt pyran ring2. The conventional syntheses of xanthenediones were acid or base catalyzed condensation of appropriate active methylene carbonyl compounds with aldehydes3. However, many of these procedures involved longer reaction times,low yields and side reactions of aldehydes. In recent years, room temperature ionic liquids (RTILs) have been used as novel green reaction media4. Considering that InCl3 is an efficient Lewis acid catalyst used in promoting many organic reactions, especially in several condensation processes, we herein wish to report a very simple and green method for the preparation of poly-hydrogenated xanthenediones through InCl3·4H2O promoted cascade reaction of aldehydes and 5,5-dimethyl-l,3-cyclohexanedione in ionic liquid,1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]). The preparative process presented here is operationally simple, environmentally benign and has the advantage of enhanced atom utilization. Furthermore, the solvent and the catalyst used can be recovered easily and reused efficiently.     

Synthesis of Hexagonal Co3O4 and Ag/Co3O4 Composite Nanosheets and their Electrocatalytic Performances

Sheet-like precursors of Co₃O₄ and Ag/Co₃O₄ composites with different Ag contents were synthesized with assistance of triethylamine via a hydrothermal process. The final samples were fabricated by calcing each precursor at 400 °C. The as-prepared samples were identified and characterized by thermogravimetric analysis and differential thermal analysis, X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and field emission scanning electron microscopy, respectively. The Co₃O₄ and Ag/Co₃O₄ composite samples were used as electrocatalysts modified on a glassy carbon electrode for p-nitrophenol reduction in a basic solution. The electrocatalytic results indicated that all the samples showed enhanced electrocatalytic performance for p-nitrophenol by comparing a bare glass carbon electrode, and p-nitrophenol could be reduced by Co₃O₄ at a high peak current but a rather higher peak potential but be reduced effectively by Ag/Co₃O₄ composites at lower potential. Ag/Co₃O₄ composites with 4 % Ag displayed the highest electrocatalytic activity.     

Efficient Synthesis of 4H-Pyran and Spiro-Oxindole Derivatives Based on Al2O3/V2O5 Nanocomposite as Catalyst

Russian Journal of Organic Chemistry - A simple and eco-friendly catalytic alternative has been proposed for one-pot three-component synthesis of 4H-pyrane and spiro-oxindole derivatives, as two...     

各种形貌的纳米Co3O4的制备及其应用*

本文综述了各种形貌的纳米Co₃O₄的制备及其应用。制备纳米Co₃O₄的方法有很多,包括热分解、水热法、溶剂热法、化学喷雾热分解、化学气相沉积和溶胶-凝胶法。各种形貌的Co₃O₄被制备,如纳米球、纳米立方体、纳米管、纳米棒、纳米片、纳米纤维和介孔结构。Co₃O₄是一种重要的磁性P-型半导体,在锂离子电池、超级电容器、电致变色、磁性材料、气体传感器和催化剂等诸多领域有比较广泛的应用。     

An Efficient Synthesis of 3H‐1,5‐Benzodiazepine Derivatives Catalyzed by Heteropolyacids as a Heterogeneous Recyclable Catalyst

3H‐1,5‐benzodiazepines were synthesized by the condensation of o‐phenylendiamine and various 1,3‐diketones in the presence of various heteropolyacid (HPA) catalysts under mild conditions in very good yields and with high selectivity.     

Imidazolium-Based Ionic Network as a Robust Heterogeneous Catalyst in Synthesis of Phenacyl Derivatives

A new imidazolium-based poly(ionic liquid) has been synthesized and used as a robust heterogeneous catalyst for the preparation of phenacyl derivatives by an S_N2 reaction of different phenacyl bromides with a broad range of nucleophiles. The products are obtained in high yields under mild conditions. The catalyst can be recycled efficiently.

     

三维花状Co3O4的低成本制备及其在催化CO氧化中的应用（英文）

采用一种快速、无模板、低成本的微波辅助水热法在2min内制备了三维花状Co3O4.所用原料均是无机盐.前驱体浓度和尿素的逐渐水解对Co3O4形貌影响很大.制得的花状Co3O4比表面积大,且暴露了(110)高活性指数面,对CO氧化具有较高的催化活性.     

Self‐Templating Synthesis of Hollow Co3O4 Microtube Arrays for Highly Efficient Water Electrolysis

In spite of recent advances in the synthesis of hollow micro/nanostructures, the fabrication of three‐dimensional electrodes on the basis of these structures remains a major challenge. Herein, we develop an electrochemical sacrificial‐template strategy to fabricate hollow Co₃O₄ microtube arrays with hierarchical porosity. The resultant unique structures and integrated electrode configurations impart enhanced mass transfer and electron mobility, ensuring high activity and stability in catalyzing oxygen and hydrogen evolution reactions. Impressively, the apparent performance can rival that of state‐of‐the‐art noble‐metal and transition‐metal electrocatalysts. Furthermore, this bifunctional electrode can be used for highly efficient overall water splitting, even competing with the integrated performance of Pt/C and IrO₂/C.     

A New Method for the Preparation of Co3O4 Nanoparticles

In this study, a novel method was used to prepare well-separated and spherical tricobalt tetraoxide (Co₃O₄) nanosized particles. The overall process involves three steps: preparation of insoluble carboxyl-containing grafted starch copolymer (ISC), formation of precursor (ISC-Co), decomposition of ISC-Co, and phase transition of Co₃O₄ nanoparticles. The Infrared spectra used for ISC and ISC-Co are discussed. The decomposition of the precursor was studied by thermogravimetric-differential thermal analysis, the crystalline phase was characterized by x-ray diffraction, and the size distribution and shape of particles were observed by transmission electron microscopy. Translated from Journal of Northwest Normal University (Natural Science Edition), 2005, 5(5) (in Chinese)     

Task-Specific Ionic Liquid as the Recyclable Catalyst for the Rapid and Green Synthesis of Dihydropyrano[3,2-c]chromene Derivatives

Abstract

A task-specific ionic liquid, [H₃N⁺–CH₂–CH₂–OH][CH₃COO^?], was successfully applied as an efficient and reusable catalyst for the one-pot domino to approach to dihydropyrano[3,2-c]chromene derivatives with atom economy in a condensation reaction of 4-hydroxycoumarin, aldehydes, and malononitrile in a combinatorial fashion. The reaction gave excellent yields within short reaction times at room temperature under solvent-free grinding conditions. The products and ionic liquid could be conveniently separated from the reaction mixture, indicating that the whole process was performed as a green chemical transformation.      

Synthesis of 3-Pyrazolyl-4H-1,2,4-triazoles Using Fe3O4@SiO2@Tannic Acid Nanoparticles as an Efficient,Green, and Magnetically Separable Catalyst

Russian Journal of Organic Chemistry - Tannic acid‐functionalized silica‐coated Fe3O4 nanoparticles (Fe3O4@SiO2@tannic acid) were synthesized and characterized by transmission electron...     

Exfoliated Single Layers of Layered Cobalt Hydroxide for Ultrafine Co3O4 Nanoparticles on Graphene Nanosheets as an Efficient Electrocatalyst for Oxygen Reduction

A highly effective way to produce an oxygen reduction electrocatalyst was developed through the self-assembly of exfoliated single layers of cobalt hydroxide (Co(OH)₂) and graphene oxide (GO). These 2D materials have complete contact with one another because of their physical flexibility and the electrostatic attraction between negatively charged GO and positively charged Co(OH)₂ layers. The strong coupling induces transformation of the Co(OH)₂ single layer into a discrete nanocrystal of spinel Co₃O₄ with an average size of 8 nm on reduced GO (RGO) during calcination, which could not be obtained with bulk-layered cobalt hydroxide because of its rapid layer collapse. The ultrafine Co₃O₄/RGO hybrid exhibited not only comparable performance in the oxygen reduction reaction but also higher durability compared with the commercial 20 wt % Pt/C catalyst.     

Synthesis of Co3O4/Carbon Heteroaerogels with Ultrahigh Capacitance via Polyethyleneimine Intercalation of Co2BIM4 Nanosheets

The development of metal–organic frameworks (MOFs)-based supercapacitors have attracted intense concentration in recent years due to their regularly arranged porous and tunable pore sizes. However, the performance of the MOFs-derived supercapacitors is also low because of their poor electrical conductivity and rarely accessible active sites. In the present work, we developed a Co-MOF (namely Co₂BIM₄, BIM=benzimidazole) nanosheets derived Co₃O₄/nitrogen-doped carbon (Co₂BIM₄-Co₃O₄/NC) heteroaerogel as a novel supercapacitor electrode. The 3D Co₂BIM₄-Co₃O₄/NC heteroaerogels were obtained by directly intercalating polyethyleneimine (PEI) into the interlayers of Co₂BIM₄ nanosheets and following by carbonizing the resulting Co₂BIM₄/PEI composite. The Co₂BIM₄-Co₃O₄/NC electrode possessed 3D conductive framework with an overlapped hetero-interface and expanded interlayers, leading to fast and stable charge transfer/diffusion and an enhanced pseudocapacitance performance. Therefore, the Co₂BIM₄-Co₃O₄/NC electrode showed ultrahigh capacitance of 2568 F g⁻¹ at 1 A g⁻¹, 1747 F g⁻¹ at 10 A g⁻¹, and excellent long cycling time with a capacitance preservation of 92.7 % following 10000 cycles at 10 A g⁻¹, which is very promising for applications in supercapacitors and other energy storage devices.     

四氧化三钴催化分解工业废气中的一氧化二氮

介绍Co3O4催化分解工业废气中N2O的基础知识,涉及N2O分解的主要化学原理,以及Co3O4催化剂的结构特点、催化机理和改进,供一线高中化学教师用于教学实践。