含磷丙酮酸脱氢酶系抑制剂的研究进展

丙酮酸脱氢酶系是生物体内重要的氧化还原酶之一,其催化丙酮酸氧化脱羧转化为乙酰辅酶A是生物体内的关键代谢过程,在生物化学研究中具有重要的意义.根据生物化学的理由来进行新药分子生物合理设计的观点,丙酮酸脱氢酶系是一个具有重要意义和值得探索的靶标.研究表明许多有机磷化合物是一类重要的丙酮酸脱氢酶系抑制剂.本文系统介绍了含磷丙酮酸脱氢酶系抑制剂的研究历程和研究动态,并结合本课题组的研究工作对代表性的研究结果和进展进行了总结和评述.     

L-乳酸脱氢酶催化反应机理的理论研究进展

介绍Ｌ－乳酸脱氢酶可逆催化氧化Ｌ－乳酸生成丙酮酸的反应机理研究的最新进展。讨论底物及活性中心附近残基的构型对反应的影响以及Ｈ－离子转移的可能机理。     

具有除草活性的α-氧代膦酸衍生物研究进展

简要的总结了十三个系列的α-氧代膦酸衍生物的合成和生物活性的研究进展。为了获得具有较高除草活性及商品化潜力的新型膦酸脂,尝试采用生物合理设计的方法设计新型的丙酮酸脱氢酶系抑制剂,通过在合成、生物测定、机理及生物化学研究的基础上进行构效关系及结构优化的研究,发现α-(取代苯氧乙酰氧基)烃基膦酸酯为一类兼具有良好除草活性和植调活性的先导母体,研究证明该类化合物为丙酮酸脱氢酶系的强抑制剂。     

介体型乳酸脱氢酶生物传感器的研制及应用

本报道了能对丙酮酸产生良好响应的电流型乳酸脱氢酶生物传感器。该传感器以耐尔兰Ａ修饰浸石墨电极为基体电极，将酶直接固化在蚕丝蛋白膜上。在ＰＨ７．４的ＮａＨ２ＰＯ４－ＮａＯＨ介质中，当２．４×１０＾－４ｍｏｌ／Ｌ的辅酶Ｉ（ＮＡＤＨ）存在下，该传感器的响应电流与丙酮酸浓度在３．２×１０＾－５ｍｏｌ／Ｌ范围内有良好的线性关系。响应时间为６０ｓ．本讨论了影响传感器响应的各种因素，用此传感器测定了人血清中     

基于丙酮酸/还原型辅酶I/乳酸脱氢酶/氧化型辅酶I/乳酸正逆反应同时测定丙酮酸/乳酸的酶荧光毛细管分析

利用丙酮酸(PA)/还原型辅酶I(NADH)/乳酸脱氢酶(LDH)/氧化型辅酶I(NAD+)/乳酸(LA)荧光反应体系的正逆反应,建立了一种可直接用于临床检验、能同时测定血清中微量PA/LA的酶荧光毛细管分析法.本方法可在常规荧光光度计上,用普通玻璃毛细管同时实现了PA/LA的高灵敏分析,每次分析试剂和样品的用量仅9 ...     

离子排斥法测定丙酮酸发酵提取液中的丙酮酸含量

建立一种测定丙酮酸发酵液中丙酮酸含量的方法。采用有机酸离子排斥柱,TSKgel OApak-A为分析柱,TSKgel OApak-P为保护柱;柱温:40℃;流动相:4.5mmol/L H2SO4,流速0.8mL/min;检测波长:210nm。丙酮酸在42.45~2122.3mg/L范围内,峰面积与样品浓度有良好的线性关系(A=4.7278c 31.6296,r=0.9999),检出限为4.6mg/L。发酵液中丙酮酸含量在5.1%左右,丙酮酸的回收率为97.11%~99.21%。     

芳基丙酮酸及其乙酯的合成

α-甲酰氨基-β-芳基丙烯酸乙酯用5％盐酸乙醇溶液水解生成相应的芳基丙酮酸乙酯,再经碱处理变为相应的芳基丙酮酸。     

二价金属离子影响乳酸脱氢酶活性的单扫伏安研究

探讨了５种二价金属离子对乳酸脱氢酶在辅酶ＮＡＤＨ存在下转化丙酮酸为乳酸催化体系的影响、结果表明，Ｚｎ＾２＋，Ｃａ＾２＋与ＬＤＨ活性无影响，Ｍｎ＾２＋有抑制作用，而Ｃｕ＾２＋，Ｍｇ＾２＋在低浓度时有微弱的促进作用。     

紫外分光光度法测定丙酮酸

基于丙酮酸在紫外吸收光谱290～340nm区有较强的吸收,建立了分光光度法测定丙酮酸(盐)的方法。在pH11．0的水溶液中,位于320nm处,丙酮酸有吸收,而其他有机酸和杂质无吸收或吸收不明显。在320nm处,丙酮酸在0．2～2．8g／L范围内符合比耳定律,其R2为0．9997,平均回收率99．8％,RSD0．46％。该法适合于发酵液和分离提取过程中丙酮酸及其盐类的测定。     

微量乳酸脱氢酶毛细管电泳在线反应电化学检测方法的研究

以乳酸脱氢酶催化乳酸与NAD⁺反应生成丙酮酸与NADH和安培法检测NADH为基础,利用电泳中介微分析(EMMA)技术,研究了超微量乳酸脱氢酶的毛细管电泳在线反应的电化学检测方法,并从理论上对EMMA电泳图中的平台宽度和高度作了初步探讨.结果表明,在EMMA的恒高压和零高压两种模式下,使用直径为150μm和束状碳纤维电极,在+0.8V检测电位下,对LDH活性检测灵敏度分别为1.1nU和0.6nU;所导出的平台高度、宽度与实验条件的关系式对提高毛细管电泳分离效率和检测灵敏度有一定指导意义.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.