Synthesis and characterization of new biphenolate and binaphtholate rare-Earth-metal amido complexes: catalysts for asymmetric olefin hydroamination/cyclization

Monomeric diolate amido yttrium complexes [Y[diolate][N(SiHMe(2))(2)](thf)(2)] can be prepared in good yield by treating [Y[N(SiHMe(2))(2)](3)(thf)(2)] with either 3,3'-di-tert-butyl-5,5',6,6'-tetramethyl-1,1'-biphenyl-2,2'-diol (H(2)(Biphen)), 3,3'-bis(2,4,6-triisopropylphenyl)-2,2'-dihydroxy-1,1'-dinaphthyl (H(2)(Trip(2)BINO)) or 3,3'-bis(2,6-diisopropylphenyl)-2,2'-dihydroxy-1,1'-dinaphthyl (H(2)(Dip(2)BINO)) in racemic and enantiopure form. The racemic complex [Y(biphen)[N(SiHMe(2))(2)](thf)(2)] dimerizes upon heating to give the heterochiral complex (R,S)-[Y(biphen)[N(SiHMe(2))(2)](thf)](2). The corresponding dimeric heterochiral lanthanum complex was the sole product in the reaction of H(2)(Biphen) with [La[N(SiHMe(2))(2)](3)(thf)(2)]. Single-crystal X-ray diffraction of both dimeric complexes revealed that the two Ln(biphen)[N(SiHMe(2))(2)](thf) fragments are connected through bridging phenolate groups of the biphenolate ligands. The two different phenolate groups undergo an intramolecular exchange process in solution leading to their equivalence on the NMR timescale. All complexes were active catalysts for the hydroamination/cyclization of aminoalkynes and aminoalkenes at elevated temperature, with [Y((R)-dip(2)bino)[N(SiHMe(2))(2)](thf)(2)] being the most active one giving enantioselectivities of up to 57 % ee. Kinetic resolution of 2-aminohex-5-ene proceeded with this catalyst with 6.4:1 trans selectivity to give 2,5-dimethylpyrrolidine with a k(rel) of 2.6.     

Postfunctionalization of periodic mesoporous silica SBA-1 with magnesium(II) and iron(II) silylamides

Magnesium silylamide complexes Mg[N(SiHMe(2))(2)](2)(THF)(2) and Mg[N(SiPhMe(2))(2)](2) were synthesized according to transsilylamination and alkane elimination protocols, respectively, utilizing Mg[N(SiMe(3))(2)](2)(THF)(2) and [Mg(n-Bu)](2) as precursors. Cage-like periodic mesoporous silica SBA-1 was treated with donor solvent-free dimeric [Mg{N(SiHMe(2))(2)}(2)](2), [Mg{N(SiMe(3))(2)}(2)](2) and monomeric Mg[N(SiPhMe(2))(2)](2), producing hybrid materials [Mg(NR(2))(2)]@SBA-1 with magnesium located mainly at the external surface. Consecutive grafting of [Mg{N(SiHMe(2))(2)}(2)](2) and [Fe(II){N(SiHMe(2))(2)}(2)](2) onto SBA-1 led to heterobimetallic hybrid materials which exhibit complete consumption of the isolated surface silanol groups, evidencing intra-cage surface functionalization. All materials were characterized by DRIFT spectroscopy, nitrogen physisorption and elemental analysis.     

Terphenyl cyclooctatetraenyl compounds of samarium

The syntheses and molecular structures of a number of terphenyl-based compounds of the lanthanide element samarium are reported. Reaction of 2 equiv of DppLi (Dpp = 2,6-diphenylphenyl) with 1 equiv of SmCl(3) in tetrahydrofuran at room temperature yields (Dpp)(2)SmCl(micro-Cl)Li(THF)(3) (1). The one-pot reaction of 1 equiv of K(2)COT (COT(2)(-) = cyclooctatetraenyl dianion) with 1 equiv SmCl(3) in tetrahydrofuran at room temperature followed by addition of 1 equiv of terphenyllithium salt DppLi, DmpLi (Dmp = 2,6-dimesitylphenyl), or DanipLi (Danip = 2,6-di(o-anisol)phenyl) produces DppSmCOT(micro-Cl)Li(THF)(3) (2), DmpSm(THF)COT (3), and DanipSm(THF)COT (4), respectively. In the case of the Danip-based compound 4 the order of addition of reagents can be reversed producing the same compound, however, in considerably lower yield. Compound 2 can also be prepared by reaction of 1 with 1 equiv of K(2)COT in tetrahydrofuran. The molecular structure of the bis(terphenyl) compound 1 exhibits a formally four-coordinate metal atom. The molecular structures of the terphenyl COT compounds 2-4 feature monomeric complexes which are obtained either as a lithium chloride adduct (2) or as tetrahydrofuran adducts (3, 4). In 4 the Danip ligand adopts the meso form.     

Rare earth metal bis(amide) complexes bearing amidinate ancillary ligands: synthesis, characterization, and performance as catalyst precursors for cis-1,4 selective polymerization of isoprene

A family of rare earth metal bis(amide) complexes bearing monoanionic amidinate [RC(N-2,6-Me(2)C(6)H(3))(2)](-) (R = cyclohexyl (Cy), phenyl (Ph)) as ancillary ligands were synthesized and characterized. One-pot salt metathesis reaction of anhydrous LnCl(3) with one equivalent of amidinate lithium [RC(N-2,6-Me(2)C(6)H(3))(2)]Li, following the introduction of two equivalents of NaN(SiMe(3))(2) in THF at room temperature afforded the neutral and unsolvated mono(amidinate) rare earth metal bis(amide) complexes [RC(N-2,6-Me(2)C(6)H(3))(2)]Y[N(SiMe(3))(2)](2) (R = Cy (1); R = Ph (2)), and the "ate" mono(amidinate) rare earth metal bis(amide) complex [CyC(N-2,6-Me(2)C(6)H(3))(2)]Lu[N(SiMe(3))(2)](2)(μ-Cl)Li(THF)(3) (3) in 61-72% isolated yields. These complexes were characterized by elemental analysis, NMR spectroscopy, FT-IR spectroscopy, and X-ray single crystal diffraction. Single crystal structural determination revealed that the central metal in complexes 1 and 2 adopts a distorted tetrahedral geometry, and in complex 3 forms a distorted trigonal bipyramidal geometry. In the presence of AlMe(3), and in combination with one equimolar amount of [Ph(3)C][B(C(6)F(5))(4)], complexes 1 and 2 showed high activity towards isoprene polymerization to give high molecular weight polyisoprene (M(n) > 10(4)) with good cis-1,4 selectivity (>90%).     

Bis(imidazolin-2-iminato) rare earth metal complexes: synthesis, structural characterization, and catalytic application

Reaction of anhydrous rare earth metal halides MCl(3) with 2 equiv of 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-imine (Im(Dipp)NH) and 2 equiv of trimethylsilylmethyl lithium (Me(3)SiCH(2)Li) in THF furnished the complexes [(Im(Dipp)N)(2)MCl(THF)(n)] (M = Sc, Y, Lu). The molecular structures of all three compounds were established by single-crystal X-ray diffraction analyses. The coordination spheres around the pentacoordinate metal atoms are best described as trigonal bipyramids. Reaction of YbI(2) with 2 equiv of LiCH(2)SiMe(3) and 2 equiv of the imino ligand Im(Dipp)NH in tetrahydrofuran did not result in a divalent complex, but instead the Yb(III) complex [(Im(Dipp)N)(2)YbI(THF)(2)] was obtained and structurally characterized. Treatment of [(Im(Dipp)N)(2)MCl(THF)(n)] with 1 equiv of LiCH(2)SiMe(3) resulted in the formation of [(Im(Dipp)N)(2)M(CH(2)SiMe(3))(THF)(n)]. The coordination arrangement of these compounds in the solid state at the metal atoms is similar to that found for the starting materials, although the introduction of the neosilyl ligand induces a significantly greater distortion from the ideal trigonal-bipyramidal geometry. [(Im(Dipp)N)(2)Y(CH(2)SiMe(3))(THF)(2)] was used as precatalyst in the intramolecular hydroamination/cyclization reaction of various terminal aminoalkenes and of one aminoalkyne. The complex showed high catalytic activity and selectivity. A comparison with the previously reported dialkyl yttrium complex [(Im(Dipp)N)Y(CH(2)SiMe(3))(2)(THF)(3)] showed no clear tendency in terms of activity.     

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](μ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (μ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](μ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.     

Synthesis and characterization of three-coordinate and related beta-diketiminate derivatives of manganese,iron, and cobalt

Treatment of M[N(SiMe(3))(2)](2) (M = Mn, Fe, Co) with various bulky beta-diketimines afforded a variety of new three-coordinate complexes which were characterized by UV-vis, (1)H NMR and IR spectroscopy, magnetic measurements, and X-ray crystallography. Reaction of the beta-diketimine H(Dipp)NC(Me)CHC(Me)N(Dipp) (Dipp(2)N(wedge)NH; Dipp = C(6)H(3)-2,6-Pr(i)(2)) with M[N(SiMe(3))(2)](2) (M = Mn or Co) gave Dipp(2)N(wedge)NMN(SiMe(3))(2) (M = Mn, 1; Co, 3) while the reaction of Fe[N(SiMe(3))(2)](2) with Ar(2)N(wedge)NH (Ar = Dipp, C(6)F(5), Mes, C(6)H(3)-2,6-Me(2), or C(6)H(3)-2,6-Cl(2)) afforded the series of iron complexes Ar(2)N(wedge)NFe[N(SiMe(3))(2)] (Ar = Dipp, 2a; C(6)F(5), 2b; Mes, 2c; C(6)H(3)-2,6-Me(2), 2d; C(6)H(3)-2,6-Cl(2), 2e). This represents a new synthetic route to beta-diketiminate complexes of these metals. The four-coordinate bis-beta-diketiminate complex Fe[N(wedge)N(C(6)F(5))(2)](2), 4, was also isolated as a byproduct from the synthesis of 2b. Direct reaction of the Dipp(2)N(wedge)NLi with CoCl(2) gave the "ate" salt Dipp(2)N(wedge)NCoCl(2)Li(THF)(2), 5, in which the lithium chloride has formed a complex with Dipp(2)N(wedge)NCoCl through chloride bridging. The Fe(III) species Dipp(2)N(wedge)NFeCl(2), 6, was obtained cleanly from the reaction of FeCl(3) with Dipp(2)N(wedge)NLi. Magnetic measurements showed that all the complexes have a high spin configuration. The different substituents in the series of iron complexes 2a-e allowed assignment of their paramagnetically shifted (1)H NMR spectra. The X-ray crystal structures 1-2d and 3 showed that they have a distorted three-coordinate planar configuration at the metals whereas complexes 4-6 have highly distorted four-coordinate geometries.     

Scandium alkyl and amide complexes containing a cyclen-derived (NNNN) macrocyclic ligand: synthesis, structure and ring-opening polymerization activity toward lactide monomers

Cyclic polyamine 1,4,7-trimethyl-1,4,7,10-tetraazacyclododecane, (Me(3)TACD)H (= Me(3)[12]aneN(4)), reacted with [K{N(SiHMe(2))(2)}] in benzene-d(6) to give [K{(Me(3)TACD)SiMe(2)N(SiHMe(2))}] (1) under hydrogen evolution. Single-crystal X-ray diffraction of 1 shows a dinuclear structure in the solid state, featuring a bridging μ-amido and a weak β-agostic Si-H bond. 1,7-Dimethyl-1,4,7,10-tetraazacyclododecane (Me(2)TACD)H(2) (= Me(2)[12]aneN(4)) and (Me(3)TACD)H were reacted with [Sc{N(SiHMe(2))(2)}(3)(thf)] in benzene-d(6) to give [{(Me(2)TACD)SiMe(2)N(SiHMe(2))}Sc{N(SiHMe(2))(2)}] (2) and [(Me(3)TACD)Sc{N(SiHMe(2))(2)}(2)SiMe(2)] (3), respectively. Both compounds are monomeric in solution and X-ray diffraction studies showed the scandium metal centers to be six-coordinate. The scandium alkyl complex [Sc(Me(3)TACD)(CH(2)SiMe(3))(2)] (4) was obtained by reacting (Me(3)TACD)H with [Sc(CH(2)SiMe(3))(3)(thf)] in benzene-d(6). The scandium amide complexes 2 and 3 catalyzed the ring-opening polymerization (ROP) of meso-lactide to give syndiotactic polylactides.     

Expanding dinitrogen reduction chemistry to trivalent lanthanides via the LnZ3/alkali metal reduction system: evaluation of the generality of forming Ln2(mu-eta2:eta2-N2) complexes via LnZ3/K

The Ln[N(SiMe(3))(2)](3)/K dinitrogen reduction system, which mimicks the reactions of the highly reducing divalent ions Tm(II), Dy(II), and Nd(II), has been explored with the entire lanthanide series and uranium to examine its generality and to correlate the observed reactivity with accessibility of divalent oxidation states. The Ln[N(SiMe(3))(2)](3)/K reduction of dinitrogen provides access from readily available starting materials to the formerly rare class of M(2)(mu-eta(2):eta(2)-N(2)) complexes, [[(Me(3)Si)(2)N](2)(THF)Ln](2)(mu-eta(2):eta(2)-N(2)), 1, that had previously been made only from TmI(2), DyI(2), and NdI(2) in the presence of KN(SiMe(3))(2). This LnZ(3)/alkali metal reduction system provides crystallographically characterizable examples of 1 for Nd, Gd, Tb, Dy, Ho, Er, Y, Tm, and Lu. Sodium can be used as the alkali metal as well as potassium. These compounds have NN distances in the 1.258(3) to 1.318(5) A range consistent with formation of an (N=N)(2)(-) moiety. Isolation of 1 with this selection of metals demonstrates that the Ln[N(SiMe(3))(2)](3)/alkali metal reaction can mimic divalent lanthanide reduction chemistry with metals that have calculated Ln(III)/Ln(II) reduction potentials ranging from -2.3 to -3.9 V vs NHE. In the case of Ln = Sm, which has an analogous Ln(III)/Ln(II) potential of -1.55 V, reduction to the stable divalent tris(amide) complex, K[Sm[N(SiMe(3))(2)](3)], is observed instead of dinitrogen reduction. When the metal is La, Ce, Pr, or U, the first crystallographically characterized examples of the tetrakis[bis(trimethylsilyl)amide] anions, [M[N(SiMe(3))(2)](4)](-), are isolated as THF-solvated potassium or sodium salts. The implications of the LnZ(3)/alkali metal reduction chemistry on the mechanism of dinitrogen reduction and on reductive lanthanide chemistry in general are discussed.     

Iron silylamide-grafted periodic mesoporous silica

The surface chemistry of a series of well-defined metalorganic ferrous and ferric iron complexes on periodic mesoporous silica (PMS) was investigated. In addition to literature known Fe(II)[N(SiMe(3))(2)](2)(THF), Fe(II)[N(SiPh(2)Me(2))(2)](2), and Fe(III)[N(SiMe(3))(2)](2)Cl(THF), the new complexes [Fe(II){N(SiHMe(2))(2)}(2)](2) and Fe(III)[N(SiHMe(2))(2)](3)(μ-Cl)Li(THF)(3) were employed as grafting precursors. Selection criteria for the molecular precursors were the molecular size (monoiron versus diiron species), the oxidation state of the iron center (II versus III), and the functionality of the silylamido ligand (e.g., built-in spectroscopic probes). Hexagonal channel-like MCM-41 and cubic cage-like SBA-1 were chosen as two distinct PMS materials. The highest iron load (12.8 wt %) was obtained for hybrid material [Fe(II){N(SiHMe(2))(2)}(2)](2)@MCM-41 upon stirring the reaction mixture iron silylamide/PMS/n-hexane for 18 h at ambient temperature. Size-selective grafting and concomitantly extensive surface silylation were found to be prominent for cage-like SBA-1. Here, the surface metalation is governed by the type of iron precursor, the pore size, the reaction time, and the solvent. The formation of surface-attached iron-ligand species is discussed on the basis of diffuse reflectance infrared Fourier transform (DRIFT) and electron paramagnetic resonance (EPR) spectroscopy, nitrogen physisorption, and elemental analysis.     

β-Diketiminate Germylene-Supported Pentafluorophenylcopper(I) and -silver(I) Complexes [LGe(Me)(CuC(6)F(5))(n)](2) (n = 1, 2), LGe[C(SiMe(3))N(2)]AgC(6)F(5), and {LGe[C(SiMe(3))N(2)](AgC(6)F(5))(2)}(2) (L = HC[C(Me)N-2,6-iPr(2)C(6)H(3)](2)): Synthesis and Structural Characterization

Reactions of LGeMe (L = HC[C(Me)N-2,6-iPr(2)C(6)H(3)](2)) with 0.25 or 0.5 equiv of (CuC(6)F(5))(4) gave the products [LGe(Me)CuC(6)F(5)](2) (1) and [LGe(Me)(CuC(6)F(5))(2)](2) (2), respectively. In situ formed 1 reacted with 0.5 equiv of (CuC(6)F(5))(4) to give 2 on the basis of NMR ((1)H and (19)F) spectral measurements. Conversely, 2 was converted into 1 by treatment with 2 equiv of LGeMe. Reactions of LGeC(SiMe(3))N(2) with 1 or 2 equiv of AgC(6)F(5)·MeCN produced the corresponding compounds LGe[C(SiMe(3))N(2)]AgC(6)F(5) (3) and {LGe[C(SiMe(3))N(2)](AgC(6)F(5))(2)}(2) (4). Similarly, 3 was converted into 4 by treatment with 1 equiv of AgC(6)F(5)·MeCN and 4 converted into 3 by reaction with 2 equiv of LGeC(SiMe(3))N(2). X-ray crystallographic studies showed that 1 contains a rhombically bridged (CuC(6)F(5))(2), while 2 has a chain-structurally aggregated (CuC(6)F(5))(4), both supported by LGeMe. Correspondingly, 3 showed a terminally bound AgC(6)F(5) and 4 a chain-structurally aggregated (AgC(6)F(5))(4), both supported by LGeC(SiMe(3))N(2). Photophysical studies proved that the Ge-Cu metal-metalloid donor-acceptor bonding persists in solutions of 1 and 2 and Ge-Ag donor-acceptor bonding in solutions of 3 and 4 as a result of the clear migration of their emission bands compared to those of the corresponding starting materials. Low-temperature (-50 °C) (19)F NMR spectral measurements detected dissociation of 1, 2, and 4 by the aggregation part of the CuC(6)F(5) or AgC(6)F(5) entities in solution. These results provide good support for pentafluorophenylcopper(I) or -silver(I) species having β-diketiminate germylene as a donor because of its remarkably electronic and steric character.     

The role of ligand displacement in SmII-HMPA-based reductions

Addition of HMPA to [Sm[N(SiMe(3))(2)](2)] produces a less reactive reductant in contrast to addition of HMPA to SmI(2). While the [Sm[N(SiMe(3))(2)](2)]-HMPA combination results in a more powerful reductant based on the redox potential, the observed decrease in reactivity is attributed to steric hindrance caused by the nonlabile ligand -N(SiMe(3))(2) and HMPA around the Sm metal. The importance of ligand displacement (exchange) in Sm(II)-HMPA-based reactions and insight into the mechanism of [Sm[N(SiMe(3))(2)](2)]-HMPA and SmI(2)-HMPA reductions are presented.     

Syntheses, structures and reactions of a series of beta-diketiminatoyttrium compounds

This paper describes the synthesis and selected reactions of a series of crystalline mono(beta-diiminato)yttrium chlorides , , , , , , and . The X-ray structure of each has been determined, as well as of [YCl()(2)] (), [Y()(2)OBu(t)] () and [Y{CH(SiMe(3))(2)}(thf)(mu-Cl)(2)Li(OEt(2))(2)(mu-Cl)](2) (). The N,N'-kappa(2)-beta-diiminato ligands were [{N(R)C(Me)}(2)CH](-) [R = C(6)H(4)Pr(i)-2 (); R = C(6)H(4)Bu(t)-2 (); R = C(6)H(3)Pr(i)(2)-2,6 ()], [{N(SiMe(3))C(Ph)}(2)CH)](-) () and [{N(C(6)H(3)Pr(i)(2)-2,6)C(H)}(2)CPh](-) (). Equivalent portions of Li[L(x)] and YCl(3) in Et(2)O under mild conditions yielded [Y(mu-Cl)(L(x))(mu-Cl)(2)Li(OEt(2))(2)](2) [L(x) = () or ()] and [Y(mu-Cl)()(mu-Cl)Li(OEt(2))(2)(mu-Cl)](2) () or its thf (instead of Et(2)O) equivalent . Each of the Li(OEt(2))(2)Cl(2) moieties is bonded in a terminal () or bridging () mode with respect to the two Y atoms; the difference is attributed to the greater steric demand of than or . Under slightly more forcing conditions, YCl(3) and Li() (via) gave the lithium-free complex [YCl(2)()(thf)(2)] (). Two isoleptic compounds and (having in place of in , and , respectively) were obtained from YCl(3) and an equivalent portion of K[] and Na[], respectively; under the same conditions using Na[], the unexpected product was [YCl()(2)] () (i.e. incorporating only one half of the YCl(3)). A further unusual outcome was in the formation of from and 2 Li[CH(SiMe(3))(2)]. Compound [Y(){N(H)C(6)H(3)Pr(i)(2)-2,6}(thf)(mu(3)-Cl)(2)K](2).4Et(2)O (), obtained from and K[N(H)C(6)H(3)Pr(i)(2)-2,6], is noteworthy among group 3 or lanthanide metal (M) compounds for containing MClKCl (M = Y) moieties.     

Lanthanum and alkali metal coordination chemistry of the bis(dimethylphenylsilyl)amide ligand

The coordination chemistry of the bis(dimethylphenylsilyl)amide ligand, [N(SiMe2Ph)2]1-, with sodium, potassium, and lanthanum has been investigated for comparison with the more commonly used [N(SiMe3)2]1- and [N(SiHMe2)2]1- ligands. HN(SiMe2Ph)2 reacts with KH to produce KN(SiMe2Ph)2, 1, which crystallizes from toluene as the dimer [KN(SiMe2Ph)2(C7H8)]2, 2. The structure of 2 shows that the [N(SiMe2Ph)2]1- ligand can function as a polyhapto ligand with coordination from each phenyl group as well as the normal nitrogen ligation and agostic methyl interactions common in methylsilylamides. Each potassium in 2 is ligated by an eta4-toluene, two bridging nitrogen atoms, and an eta2-phenyl, an eta1-phenyl, and an eta1-methyl group. KN(SiMe2Ph)2 crystallizes from toluene in the presence of 18-crown-6 to make the monometallic complex (18-crown-6)KN(SiMe2Ph)2, 3, in which [N(SiMe2Ph)2]1- functions as a simple monodentate ligand through nitrogen. The reaction of HN(SiMe2Ph)2 with NaH in THF at reflux for 2 days generates Na[N(SiMe2Ph)2], 4, which crystallizes as the solvated dimer {(THF)Na[mu-eta1:eta1-N(SiMe2Ph)2]}2, 5. A lanthanide metallocene derivative of [N(SiMe2Ph)2]1- was obtained by reaction of K[N(SiMe2Ph)2] with [(C5Me5)2La][(mu-Ph)2BPh2]. Crystals of (C5Me5)2La[N(SiMe2Ph)2], 6, show agostic interactions between lanthanum and methyl groups of each silyl substituent. The [N(SiMe3)2]1- analogue of 3, (18-crown-6)KN(SiMe3)2, 7, was also structurally characterized for comparison.     

Synthesis and reactivity of a conveniently prepared two-coordinate bis(amido) nickel(II) complex

A strictly two-coordinate nickel(II) bis(amido) complex has been prepared and its reactivity towards a variety of small molecules is described. Ni[N(SiMe(3))(DIPP)](2) reacts with DMAP and acetonitrile to form T-shaped three-coordinate complexes, and preliminary results show that Ni[N(SiMe(3))(DIPP)](2) is a catalyst for the hydrosilation of olefins with secondary silanes at ambient temperature.     

O(2) activation and hydrolysis of Salan rare-earth metal alkyl complexes

Salan ligated yttrium alkyl complex , L(1)Y(CH(2)SiMe(3))(THF) (Salan = L(1): [2-O-3,5-tBu(2)-C(6)H(2)CH(2)N(CH(3))CH(2)](2)), was exposed to an oxygen/nitrogen atmosphere to give a bimetallic alkoxide complex , [L(1)Y(mu-OCH(2)SiMe(3))](2). Whilst the lutetium counterparts (L(1)Lu(CH(2)SiMe(3))(THF)) and (L(2)Lu(CH(2)SiMe(3))(THF); L(2): [2-O-3-tBu-C(6)H(2)CH(2)N(CH(3))CH(2)](2)) were hydrolysed with moist nitrogen to afford mixed hydroxy/silyloxy complexes and ([L(1,2)Lu(mu-OSiMe(3))(mu-OH)LuL(1,2)]), respectively.     

Rare-earth metal complexes supported by 1,omega-dithiaalkanediyl-bridged bis(phenolato) ligands: synthesis, structure, and heteroselective ring-opening polymerization of rac-lactide

Monomeric yttrium and lutetium bis(phenolato) complexes [Ln(OSSO){N(SiHMe 2) 2}(THF)] (Ln = Y, Lu) were prepared from the reaction of silylamido complexes [Ln{N(SiHMe 2) 2} 3(THF) 2] with 1 equiv of tetradentate 1,omega-dithiaalkanediyl-bridged bis(phenol) (OSSO)H 2 1- 9 in moderate to high yields. In contrast to the rigid configuration of scandium analogues, the yttrium complexes 2b and 3b and the lutetium complex 3c that contain a C 2 bridge between the two sulfur donors of the ligand are symmetric in solution. The monomeric nature of these complexes was indicated by an X-ray diffraction study of the yttrium complex 6b. The yttrium center in 6b is coordinated to the tetradentate [OSSO]-type ligand, one silylamido group and one THF ligand with the two oxygen donors of the [OSSO]-type ligand located trans. Corresponding bis(phenolato) silylamido complexes of larger rare-earth metals could not be obtained from similar reactions: Reaction of [La{N(SiHMe 2) 2} 3(THF) 2] with 1,2-xylylene-linked bis(phenol) gave a dinuclear lanthanum complex 6d of the formula [La 2(OSSO) 3] with two inequivalent eight-coordinate metal centers. The yttrium and lutetium complexes efficiently initiated the ring-opening polymerization (ROP) of lactides in THF. The heteroselectivity during the ROP of rac-lactide was enhanced when the steric demand of the bis(phenolato) ligand was increased, either by extending the bridge length or by introducing bulky ortho-substituents in the phenoxy units. A C 3 bridge within the ligand backbone is essential to allow configurational interconversion of the active site between Lambda and Delta configuration during polymerization, allowing accommodation of both enantiomers of the monomer in an alternating fashion.     

Yttrium complexes incorporating the chelating diamides [ArN(CH2)xNAr]2- (Ar = C6H3-2,6-iPr2, x= 2, 3) and their unusual reaction with phenylsilane

Novel yttrium chelating diamide complexes [(Y[ArN(CH(2))(x)NAr](Z)(THF)(n))(y)] (Z = I, CH(SiMe(3))(2), CH(2)Ph, H, N(SiMe(3))(2), OC(6)H(3)-2,6-(t)Bu(2)-4-Me; x = 2, 3; n = 1 or 2; y = 1 or 2) were made via salt metathesis of the potassium diamides (x = 3 (3), x = 2 (4)) and yttrium triiodide in THF (5,10), followed by salt metathesis with the appropriate potassium salt (6-9, 11-13, 15) and further reaction with molecular hydrogen (14). 6 and 11(Z = CH(SiMe(3))(2), x = 2, 3) underwent unprecedented exchange of yttrium for silicon on reaction with phenylsilane to yield (Si[ArN(CH(2))(x)NAr]PhH) (x = 2 (16), 3) and (Si[CH(SiMe(3))(2)]PhH(2)).     

Organometallic chemistry on periodic mesoporous organosilicas: generation of surface-confined zinc and yttrium centres

Periodic mesoporous ethylenesilicas with hexagonal P6mm and cubic Fm3m/Pm3n symmetry were prepared by using divalent surfactant C(16-3-1) and binary surfactant mixtures C(18-3-1) and C18TABr as structure-directing agents, respectively, under basic conditions. A tetramethyldisilazane-based surface silylation was carried out under mild conditions affording hybrid materials SiHMe2@PMO[MCM-41], SiHMe2@PMO[KIT-5] and SiHMe2@PMO[SBA-1], corresponding to silanol group populations of ca. 1.46, 0.67 and 1.63 mmol g(-1), respectively. New molecular zinc precursor compounds Zn[N(SiHMe2)2]2 and EtZn(OSiHtBu2) were synthesized via salt metathesis and alkane elimination procedures from ZnCl2 and LiN[SiH(CH3)2]2, HOSiHtBu2 and ZnEt2, respectively. Organozinc and organoyttrium complexes were reacted with the surface silanol groups according to a heterogeneously performed silylamide route, aswell as an alkane elimination reaction, yielding Zn[N(SiHMe2)2]@PMO[MCM-41], Zn[N(SiHMe2)2]@PMO[KIT-5], Zn[N(SiHMe2)2]@PMO[SBA-1], Zn[N(SiMe3)2]@PMO[MCM-41], Zn[N(SiMe3)2]@PMO[KIT-5], Zn[N(SiMe3)2]@PMO[SBA-1], Y[N(SiHMe2)2]x(THF)y@PMO[MCM-41], Y[N(SiHMe2)2]x(THF)y@PMO[KIT-5], Y[N(SiHMe2)2]x(THF)y@PMO[SBA-1] and Zn(OSiHtBu2)@PMO[MCM-41]. The metal loading mainly depended on the surface silanol group population, size and shape of metal-coordinated ligand, and reaction time as shown for Zn contents in the range of 4.2 to 10.6 wt%. In addition, a preferred N(SiHMe2)2/OC6H2tBu2-2,6-Me-4 ligand exchangeability was found for the large yttrium surface centres. The parent and functionalized materials were characterized by powder X-ray diffraction, elemental analysis, N2 physisorption, FTIR, 13C CP and 1H MAS NMR spectroscopy.     

(N2)3- radical chemistry via trivalent lanthanide salt/alkali metal reduction of dinitrogen: new syntheses and examples of (N2)2- and (N2)3- complexes and density functional theory comparisons of closed shell Sc3+, Y3+, and Lu3+ versus 4f(9) Dy3+

New syntheses of complexes containing the recently discovered (N(2))(3-) radical trianion have been developed by examining variations on the LnA(3)/M reductive system that delivers "LnA(2)" reactivity when Ln = scandium, yttrium, or a lanthanide, M = an alkali metal, and A = N(SiMe(3))(2) and C(5)R(5). The first examples of LnA(3)/M reduction of dinitrogen with aryloxide ligands (A = OC(6)R(5)) are reported: the combination of Dy(OAr)(3) (OAr = OC(6)H(3)(t)Bu(2)-2,6) with KC(8) under dinitrogen was found to produce both (N(2))(2-) and (N(2))(3-) products, [(ArO)(2)Dy(THF)(2)](2)(μ-η(2):η(2)-N(2)), 1, and [(ArO)(2)Dy(THF)](2)(μ-η(2):η(2)-N(2))[K(THF)(6)], 2a, respectively. The range of metals that form (N(2))(3-) complexes with [N(SiMe(3))(2)](-) ancillary ligands has been expanded from Y to Lu, Er, and La. Ln[N(SiMe(3))(2)](3)/M reactions with M = Na as well as KC(8) are reported. Reduction of the isolated (N(2))(2-) complex {[(Me(3)Si)(2)N](2)Y(THF)}(2)(μ-η(2):η(2)-N(2)), 3, with KC(8) forms the (N(2))(3-) complex, {[(Me(3)Si)(2)N](2)Y(THF)}(2)(μ-η(2):η(2)-N(2))[K(THF)(6)], 4a, in high yield. The reverse transformation, the conversion of 4a to 3 can be accomplished cleanly with elemental Hg. The crown ether derivative {[(Me(3)Si)(2)N](2)Y(THF)}(2)(μ-η(2):η(2)-N(2))[K(18-crown-6)(THF)(2)] was isolated from reduction of 3 with KC(8) in the presence of 18-crown-6 and found to be much less soluble in tetrahydrofuran (THF) than the [K(THF)(6)](+) salt, which facilitates its separation from 3. Evidence for ligand metalation in the Y[N(SiMe(3))(2)](3)/KC(8) reaction was obtained through the crystal structure of the metallacyclic complex {[(Me(3)Si)(2)N](2)Y[CH(2)Si(Me(2))NSiMe(3)]}[K(18-crown-6)(THF)(toluene)]. Density functional theory previously used only with reduced dinitrogen complexes of closed shell Sc(3+) and Y(3+) was extended to Lu(3+) as well as to open shell 4f(9) Dy(3+) complexes to allow the first comparison of bonding between these four metals.