FT-IR and 2D-IR spectroscopic studies on the effect of ions on the phase separation behavior of PVME aqueous solution.

Thermosensitive phase transition behavior of poly(vinyl methyl ether) (PVME) in an aqueous solution and the effect of inorganic ions on the coil-globule transition have been investigated by Fourier transform infrared (FT-IR) spectroscopy with attenuated total reflection (ATR) accessory. ATR-IR spectra of PVME aqueous solution indicate that in water-PVME-inorganic salts system, the phase separation temperature of PVME aqueous solution decreased with the increase of ion concentration and the increase of anion electronegativity. Meanwhile, two-dimensional infrared (2D-IR) measurements have been made to clarify the microcosmic conformational changes of PVME during the coil-globule transition. Results show that the conformation changes of main chains occur earlier than those of ether groups during heating. Furthermore, the 2D correlation spectroscopy of PVME aqueous solution during heating and the increase of concentration of potassium chloride have been studied. The features of 2D-IR spectra during heating did not change compared to the features of PVME aqueous solution during the increase of concentration of potassium chloride. This result implies that, although the addition of inorganic ions shifts the phase separation temperature, it does not alter the internal mechanism of the coil-globule transition of PVME.     

Infrared spectroscopic investigation of poly(2-methoxyethyl vinyl ether) during thermosensitive phase separation in water

Hydration changes of poly(2-methoxyethyl vinyl ether) (PMOVE) synthesized via living cationic polymerization have been investigated during a temperature-responsive phase separation in water by using infrared spectroscopy. An aqueous PMOVE solution has lower critical solution temperatures (LCSTs) of 66 degrees C in H2O and 65 degrees C in D2O at approximately 15 wt %. During phase separation, the C-H stretching (nu(C-H)) bands of PMOVE shift downward (red shift). In particular, the IR band assigned to the antisymmetric stretching vibration of the terminal methyl groups exhibits a remarkably large red shift by 16 cm-1. The band also exhibits a red shift with increasing polymer concentration at T < Tp. Density functional theory (DFT) calculations of the models of hydrated PMOVE indicate that the shift is due mainly to the breaking of hydrogen bonds (H-bonds) between the oxygen of the methoxy groups and water and partially to the breaking of the CH...O H-bond to them.     

Rates and mechanisms of conversion of ice nanocrystals to ether clathrate hydrates: guest-molecule catalytic effects at approximately 120 k

A Fourier transform infrared investigation of the rates and energetics of conversion of ice nanocrystals within 3-D arrays to ether clathrate-hydrate (CH) particles at approximately 120 K is reported. After an induction period, apparently necessitated by relatively slow nucleation of the CH phase, the well-established shrinking-core model of particle-adsorbate reaction applies to these conversions in the presence of an abundance of adsorbed ether. This implies that the transport of the ether adsorbate through the product crust encasing a reacting particle core (a necessary aspect of a particle reaction mechanism) is the rate-controlling factor. Diffusion moves adsorbed reactant molecules to the reaction zone at the interface of the ice core with the product (CH) crust. The results indicate that ether hydrate formation rates near 120 K resemble rates for gas hydrates measured near 260 K, implying rates greater by many orders of magnitude for comparable temperatures. A surprising secondary enhancement of ether CH-formation rates by the simultaneous incorporation of simple small gas molecules (N2, CO2, CH4, CO, and N2O) has also been quantified in this study. The rapid CH formation at low temperatures is conjectured to derive from defect-facilitated transport of reactants to an interfacial reaction zone, with the defect populations enhanced through transient H bonding of guest-ether proton-acceptor groups with O-H groups of the hydrate cage walls.     

Phase separation in aqueous solutions of polyethylaminophosphazene hydrochloride during heating

It is shown that aqueous solutions of polyethylaminophosphazene hydrochloride undergo phase separation during heating. This phenomenon is studied in detail at pH 3.5 (0.1 M citrate buffer) in relation to the composition of the system with the use of nephelometry and high-sensitivity DSC. The cloud points and the enthalpy of phase separation of the system are determined, and its phase diagram is constructed. The system features a lower critical solution temperature: w _2,cr = 7.3 × 10⁻⁴ and T _cr = 34.3°C. The enthalpy of phase separation is 12.8 ± 0.6 J/g of the polymer, regardless of the system composition. A new approach to the analysis of DSC data on the phase separation of aqueous solutions of polymers during heating is advanced on the basis of calorimetric parameters coupled with the data on the composition of coexisting phases. Through this approach, the main contribution to the heat effect of phase separation of the system under study is related to a change in the energy state of a polyethylaminophosphazene hydrochloride molecule as a result of its dehydration.     

Special features of gas chromatography determination of dibenzyl ether hydroperoxide impurity in benzyl alcohol

Chromato–mass spectrometric analysis of a benzyl alcohol sample has revealed the presence of dibenzyl ether hydroperoxide C₆H₅CH(OOH)OCH₂C₆H₅ impurity showing the retention index 1894±10 on a standard stationary phase (RTX-5). A special feature of this hydroperoxide is its stability under conditions of gas chromatography separation (retention temperature 190°С). This has been confirmed by the measurement of the analytical signal between the chromatographic peaks of the hydroperoxide and the major product of its decomposition (benzyl benzoate). From this criterion, dibenzyl ether hydroperoxide is more stable that, for instance, monomethyl phthalate.     

Purification of an oligonucleotide at high column loading by high affinity, low-molecular-mass displacers

New urea-functionalized silica stationary phases were prepared by a single-step surface modification through reaction of LiChrosorb Si100 (5 microm particle size) with a homologous series of alkoxysilanes, synthesized in our laboratory, with the general formula (CH3CH2O)3Si(CH2)3NHC(O)NH(CH2)nCH3, where n=4, 6 and 11. The modified silicas were characterized by elemental analysis of carbon and nitrogen, solid-state 29Si- and 13C-cross polarization magic angle spinning nuclear magnetic resonance and nitrogen adsorption isotherms at 77 K. Chromatographic evaluation of the three urea-functionalized silicas in 150x3.9 mm I.D. HPLC columns was carried out by the separation of a test mixture composed of uracil, acetophenone, benzene, toluene and naphthalene, using acetonitrile-water as mobile phase. These new stationary phases, with embedded polar urea groups, are very promising when compared with amide phases prepared by the conventional two-step modification process. A single-step reaction process silica modification is better for obtaining a well-characterized and homogeneous modified surface.     

Molecular structure-dynamics relationships in glassy poly(isophthalamide)s as revealed by wide angle x-ray scattering, dielectric loss spectroscopy, and molecular modelling

The effect of molecular structure on the gamma relaxation dynamics has been studied in a set of aromatic poly(isophthalamide)s. This polymer family differ in the bridge group between phenylene rings [hexafluoroisopropylidene (C(CF(3))(2)) or ether] and also in the presence of t-butyl groups (C(CH(3))(3)) as pendant substituent on the five position of isophthalic ring. The results obtained from wide angle x-ray scattering in the glassy state indicated that both (C(CF(3))(2)) and (C(CH(3))(3)) groups favor the separation between chains, which is reflected on different interchain average distances. Dielectric experiments showed that both bulky groups favor the mobility in the glassy state. Molecular modelling methods were used to know the kind of molecular motions associated to the dielectric relaxation observed below the glass transition temperature.     

Surface phase behavior in Langmuir monolayers of diethylene glycol mono-n-hexadecyl ether at the air-water interface

The surface phase behavior of condensed-phase domains formed during a first-order phase transition in Langmuir monolayers of diethylene glycol mono-n-hexadecyl ether at the air-water interface has been investigated by Brewster angle microscopy and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). A variety of two-dimensional (2D) structures are observed just after the appearance of the phase transition at different temperatures. At 10 and 15 degrees C, the domains are found to be small nuclei of irregular structures. Spiral structures are observed at 20 and 22 degrees C, while striplike structures at 24 degrees C. The spiral domains attain increasingly compact shape with increasing temperature, and finally become circular at >or=26 degrees C. Increases in temperature result in dehydration in the ethylene oxide chain, which increases the hydrophobicity, and impart to the molecules a longer-chain-like character. As a result line tension increases with increasing temperature, which probably outweighs the dipole-dipole repulsions showing circular domains at higher temperatures. The PM-IRRAS measurement reveals that the nu(as)(CH(2)) mode moves to lower wave numbers indicating that the LE-LC (liquid expanded-liquid condensed) phase transition during the compression of the monolayer involves changes in the conformational order of the molecules with a preferential increase in the planner trans zigzag conformation of the hydrocarbon chains. The nu(as)(CH(2)) mode in the LC region of the isotherm shows a constant value around 2917.8 cm(-1) indicating a stable state of the monolayer with an almost all-trans conformation of the hydrocarbon chains. The downward band at 1124 cm(-1) assigned to the nu(as)(C-O-C) mode indicates that the corresponding transition dipole moment is oriented perpendicular to the water surface.     

Spin crossover in a series of iron(II) complexes of 2-(2-Alkyl-2H-tetrazol-5-yl)-1,10-phenanthroline: effects of alkyl side chain, solvent, and anion

2-(2H-Tetrazol-5-yl)-1,10-phenanthroline (HL0), its alkyl-substituted derivatives (Ln, where n = 1-8, 10, 12, 14, and 16, denoting the carbon atom number of the alkyl chain) at the 2H position of the tetrazole ring, and their iron(II) complexes (a for [Fe(L0)2], na for [Fe(Ln)2](ClO4)2, and nb for [Fe(Ln)2](BF4)2) were synthesized and characterized. The crystal structures of a, a.CH3OH, 1a.CH3OH, 1b.CH3OH.CH3CN, 2a.H2O, 2b.H2O, 4b.CH3OH, 5a.H2O, 5b.H2O, 6a, 6b, 7a, 7b, and 16a are described, along with thermal analyses. a undergoes an abrupt spin crossover (SCO) at 255 K with a hysteresis loop of 6 K. a.CH3OH, 2a.H2O, and 2b.H2O exhibit irreversible SCO behaviors due to the loss of solvent molecules upon heating. 3a, 3b, 4a, and 5a.H2O show simple spin transitions above 350 K. The desolvated samples of 4b.CH3OH and 5b.H2O undergo two-step spin transitions. 16a exhibits a two-step SCO behavior between 100 and 300 K, corresponding to sequential phase transitions from the low-spin (LS) phase to the intermediate phase and then to the high-spin phase, respectively, proved by crystal structure analysis and 57Fe M?ssbauer spectroscopy. 1a.CH3OH, 10a, 10b, 12a, 12b, 14a, 14b, and 16b show gradual and incomplete SCO behaviors after cooling down from 400 K. 1b.CH3OH.CH3CN, 6a, 6b, 7a, 7b, 8a, and 8b remain in the LS state even at 400 K. This proves that the alkyl side chains, together with the solvent molecules and anions, play a crucial role in the complicated SCO behaviors in this system.     

Transition from transparent aerogels to hierarchically porous monoliths in polymethylsilsesquioxane sol-gel system

A transition from hierarchical pore structures (macro- and meso-pores) to uniform mesopores in monolithic polymethylsilsesquioxane (PMSQ, CH(3)SiO(1.5)) gels has been investigated using a sol-gel system containing surfactant Pluronic F127. The precursor methyltrimethoxysilane (MTMS) undergoes an acid/base two-step reaction, in which hydrolysis and polycondensation proceed in acidic and basic aqueous media, respectively, as a one-pot reaction. Porous morphology is controlled by changing the concentration of F127. Sufficient concentrations of F127 inhibit the occurrence of micrometer-scale phase separation (spinodal decomposition) of hydrophobic PMSQ condensates and lead to well-defined mesoporous transparent aerogels with high specific pore volume as a result of the colloidal network formation in a large amount of solvent. Phase separation regulates well-defined macropores in the micrometer range on decreasing concentrations of F127. In the PMSQ-rich gelling domain formed by phase separation, the PMSQ colloidal network formation forms mesopores, leading to monolithic PMSQ gels with hierarchical macro- and meso-pore structures. Mesopores in these gels do not collapse on evaporative drying owing to the flexible networks and repulsive interactions of methyl groups in PMSQ.     

乙炔基封端聚酰亚胺增韧改性的相结构

以双酚A二醚二酐(BPADA)和3乙-炔苯胺(APA)为原料,通过两步法合成一种热固性可交联的聚酰亚胺预聚体.将此预聚体分别与不同结构的热塑性聚酰亚胺(PI)共混,对其进行增韧改性,通过调控热塑性聚酰亚胺的质量分数,引入结构相似且含有更多柔性基团的热塑性聚酰亚胺(如含有醚键和对称甲基结构的二酐),得到了热固/热塑性聚酰亚胺复合膜.利用差示扫描量热仪(DSC)及扫描电镜(SEM)对该体系的相分离结构和相容性进行研究,并讨论其机械性能和热性能.结果表明,相分离结构使体系的机械性能得到改善,同时也保持了原有的优异热性能.     

微波加热合成含有极少量非分子筛缺陷孔的LTA型分子筛膜

 以改进的原位合成路线,于管状氧化铝载体上合成了高性能的LTA型分子筛膜. 考察了常规加热和微波加热对合成的影响. 对于95%的异丙醇原料液,常规加热合成和微波加热合成的分子筛膜表现出了相似的优良性能. 但是,当原料液中的水含量低于2.0%时,常规加热合成的分子筛膜不再具有有效的脱水性能,这是由于其膜层中有相当数量的纳米级缺陷孔存在. 采用微波加热在很大程度上消除了合成过程中非分子筛缺陷孔的生成.     

Local Extraction and Condensation under a Microscope Using the Optically Controlled Phase Separation of a Thermoresponsive Polymer

In‐situ extraction and condensation of various dyes were carried out in a phase‐separation region of a thermoresponsive polymer aqueous solution generated by near infrared (NIR) laser heating under a microscope. The NIR laser irradiation was directed at a chromium line deposited on a glass substrate, thereby causing local heating of the solution due to the photothermal effect. A phase‐separation region was formed by dehydration of the thermoresponsive polymer followed by ejection of water outside of the phase‐separation region. When various dyes were included in the solution, some dye molecules were extracted into the phase‐separation region, where they condensed. In the case of poly(N‐isopropylacrylamide) (PNIPAM, 10 wt % in an aqueous solution) as the thermoresponsive polymer and crystal violet (CV) as the dye (0.1 mM ), CV condensed by about 25 times. It was found that one of the necessary conditions for the extraction/condensation is the hydrophobicity of the dye molecule; however, the dominant cause for accumulating inside the PNIPAM chain is the molecular interaction between the amide group in the side chain of PNIPAM and the functional groups such as carbonyl or amino groups in the dye molecules.     

Structural evolution during evaporation of a 3-glycidoxypropyltrimethoxysilane film studied in situ by time resolved infrared spectroscopy

Time resolved infrared spectroscopy has been applied to study in situ the evaporation process of a 3-glycidoxypropyltrimethoxysilane hybrid sol by casting a droplet on a ZnSe substrate; the analysis has been performed in the middle-infrared range and in the near-infrared range. The experiment has allowed following the structural changes induced by water evaporation and the formation of ordered structures within the cast film; the CH(2) scissoring bands have been used as a fingerprint for the disorder to order transition of the hybrid. The experiment has been done using both a fresh sol and an aged sol which produce respectively an amorphous material and a crystalline hybrid material. The analysis has shown that the epoxy groups do not react during the evaporation while the silica structure shows only a slight condensation and an increase in open cage-like species. At the end of evaporation the hybrid has a "soft-like" state which allows structural rearrangements to self-order.     

Thermally induced phase separation of polystyrene-poly(vinyl methyl ether) mixtures

Past differential scanning calorimetry and dielectric relaxation measurements have established that polystyrene (PS)-poly(vinyl methyl ether) (PVME) mixtures exhibit a degree of compatibility when cast from toluene, whereas they are incompatible when cast from chloroform or trichloroethylene. The present study reports that toluene-cast mixtures can be phase-separated by thermal treatment at temperatures exceeding 125°C. This is true for samples containing 20–80 wt-% PS. The temperature of phase separation varies with heating rate; isothermal heating times needed to cause phase separation increase rapidly as the temperature approaches 125°C. Reversibility of the phase separation process depends upon such factors as cooling rate, annealing time, treatment temperature, and thermal history. By annealing and/or slow cooling, all thermally phase-separated mixtures have been brought back to their original state of compatibility. That is, there is no evidence for true irreversiblity of phase separation in thermally treated samples. Quench-cooled samples remain phase-separated indefinitely at room temperature, but this is attributed to rapid cooling below the glass transition of the PS. Chloroform-cast and trichloroethylene-cast mixtures have not been brought to a compatible state by thermal treatment, even after lengthy annealing and slow cooling steps.     

Solvent-modulated metamagnetism in an Fe(II) system exhibiting a two-step field-induced magnetic transition

A one-dimensional iron(II) coordination polymer, [Fe(3)(hpdc)(2)(H(2)O)(6)]·2H(2)O (H(3)hpdc = 2-hydroxypyrimidine-4,6-dicarboxylic acid) has been synthesized and characterized. The compound exhibits field-induced two-step magnetic phase transitions and a coexistence of spin-canting and metamagnetism, and undergoes a structural transformation from single-crystalline to amorphous state upon dehydration, accompanied by significantly enhanced spontaneous magnetization and critical temperature.     

Cure behavior and thermal degradation mechanisms of epoxy and epoxy–cyanate resins

The cure reactions of tetraglycidyl methylene diamine (TGMDA) epoxy cured with tetrasubstituted aromatic diamine on one hand and diglycidyl ether of bisphenol A and diglycicyl ether tetrabromobisphenol A epoxies cured with methylene bis (phenyl‐4‐cyanate) on the other hand are reported. Systematic Fourier transform infrared (FTIR) spectroscopy studies of the cure reaction of epoxy and epoxy–cyanate during thermal cycles are presented. FTIR studies indicate that the reaction of TGMDA monomer is total but the network contains a large amount of primary amine. The cyanate monomer reacts rapidly to form triazine structures. Then the epoxy monomers homopolymerize and crosslink with free cyanate groups. The gas chromatography/mass spectrometry study of volatile products evolved during the polymer thermal degradation shows the dehydration of the epoxy network and the decomposition of the amine structure. The FTIR and solid‐phase ¹³C nuclear magnetic resonance analysis revealed that the ether functions and the amine groups are temperature sensitive but the triazine structure is not. Copyright © 1999 John Wiley & Sons, Ltd.     

Hydration changes of poly(2-(2-methoxyethoxy)ethyl methacrylate) during thermosensitive phase separation in water

Hydration changes of poly(2-(2-methoxyethoxy)ethyl methacrylate) (PMoEoEMa) during thermosensitive phase separation in water have been investigated by infrared spectroscopy. The C=O stretching band can be separated into three components assigned to non-hydrated carbonyl groups and singly and doubly hydrogen-bonded carbonyl groups (1728, 1709, and 1685 cm-1, respectively). Relatively large parts of the carbonyl groups (50% in 30 wt % solution) do not form hydrogen bonds even below the transition temperature (Tp) probably because they possess crowded positions near the backbone. The fraction of hydrogen-bonding carbonyl groups decreased during phase separation by approximately 0.2. Among five nu(C-H) bands, the highest- and the lowest-frequency bands (nu(C-H)A and nu(C-H)E) exhibited relatively large red shifts of 8 and 11 cm(-1), respectively. DFT calculations indicate that the formation of a H-bond between the ether oxygen and water leads to blue shifts of nu(C-H) of adjacent alkyl groups and has a larger effect than a direct H-bond to the alkyl groups, namely, C-H...O H-bonds. The fraction of hydrogen-bonding methoxy oxygens estimated from the position of the nu(C-H)A is 1 at Tp. This result indicates that the methoxy oxygens and the carbonyl are more favorably hydrated than the other at Tp, respectively.     

Structural and magnetic resolution of a two-step full spin-crossover transition in a dinuclear iron(II) pyridyl-bridged compound

A dinuclear iron(II) complex containing the new pyridyl bridging ligand, 2,5-di(2',2'-dipyridylamino)pyridine (ddpp) has been synthesised and characterised by single-crystal X-ray diffraction, magnetic susceptibility and M?ssbauer spectral methods. This compound, [Fe(2)(ddpp)(2)(NCS)(4)]4 CH(2)Cl(2), undergoes a two-step full spin crossover. Structural analysis at each of the three plateau temperatures has revealed a dinuclear molecule with spin states HS-HS, HS-LS and LS-LS (HS: high spin, LS: low spin) for the two iron(II) centres. This is the first time that resolution of the metal centres in a HS-LS ordered state has been achieved in a two-step dinuclear iron(II) spin-crossover compound. Thermogravimetric data show that the dichloromethane solvate molecules can be removed in two distinct steps at 120 degrees C and 200 degrees C. The partially de-solvated clathrate, [Fe(2)(ddpp)(2)(NCS)(4)]CH(2)Cl(2), undergoes a one-step transition with an increased transition temperature with respect to the as synthesised material. Structural characterisation of this material reveals subtle changes to the coordination geometries at each of the iron(II) centres and striking changes to the local environment of the dinuclear complex. The fully de-solvated material remains high spin over all temperatures. Interestingly, the solvent can be re-introduced into the monosolvated solid to achieve complete conversion back to the original two-step crossover material, [Fe(2)(ddpp)(2)(NCS)(4)]4 CH(2)Cl(2).     

Effects of dehydration temperatures on moisture absorption and dissolution behavior of theophylline.

Anhydrous theophylline was prepared by heating theophylline monohydrate at temperatures between 60 degrees C and 140 degrees C. The effects of dehydration temperatures on the moisture absorption and dissolution behavior of anhydrous theophylline were investigated in this study. The hydration rate of anhydrous theophylline at 95% relative humidity and 25 degrees C decreased with increasing dehydration temperatures. From the fitting analysis of solid-state reaction models, the hydration reaction was found to be governed by the phase boundary reaction model for samples prepared at lower dehydration temperatures (<100 degrees C) but the reaction obeyed the growth of nuclei reaction model when samples were dehydrated at higher temperatures. The dissolution rates of various anhydrous theophylline samples were measured by the rotating disk method. The calculated solubility of anhydrous theophylline prepared by heating was about 2.5 times higher than that of theophylline monohydrate. The phase transformation rate from the anhydrous form to the monohydrate during dissolution tests decreased with higher dehydration temperatures. It was found that the anhydrous theophylline prepared at different dehydration temperatures transformed to the monohydrate by way of different growth of hydrate nuclei mechanism.