表面扩散的Monte Carlo初探

利用ＭｏｎｔｅＣａｒｌｏ方法模拟了理想表面和分形表面上的扩散过程；通过模拟可以发现，表面扩散系数不仅与表面浓度有关，而且还与扩散的时间、表面的几何形貌等有关。在表面覆盖度比较高时，表面扩散系数有一极大值。与理想表面相比，分形表面会使扩散系数减小。     

渗透汽化膜表面化学结构设计研究

综述了近年来渗透汽化膜表面结构设计调控的研究进展。膜表面结构的设计与优化是提高其分离性能的重要方法。然而高分子表面具有环境响应性,这往往导致高分子材料在使用环境中失去在表面设计时所期待的性能。因此,高分子膜表面的环境响应性是在对膜表面进行设计和调控过程中必须考虑的因素。本文介绍了渗透汽化膜表面结构设计的方法,重点阐述了高分子膜表面环境响应特性对膜表面性质以及渗透汽化性能的影响。指出了利用高分子膜的表面重构行为可以对其表面结构进行优化,从而有效地提高膜的分离选择性。     

Monte Carlo Simulation of Polymers Confined Between Two Surfaces in the Presence of Diluent

Structure and surface properties of polymers confined between two surfaces are studied in the presence of diluent by using an off‐lattice Monte Carlo method. When the diluent–chain interaction is weak, the density of diluent beads near the surface increases sharply with increasing the diluent–surface interaction while the chain bead density near the surface decreases gradually. The total bead density near the surface increases with increasing the diluent–surface interaction until it exceeds the total bulk density. This is mainly due to a large increase in the diluent bead density near the surface. Because of the increase of diluent at the surface, chains near the surface change their conformation, i.e., long tails become abundant while short trains and loops are relatively depleted. On the other hand, when the diluent–chain interaction becomes strong, the total bead density near the surface increases slightly, but it exceeds the total bulk density only when the diluent–surface interaction is strong enough, because the diluents approaching the surface induce chain beads to move to the surface due to strong interaction between the chain and diluent.     

Humidity-induced restructuring of the calcite surface and the effect of divalent heavy metals

The composition and topography of calcite 10114 cleavage surfaces, with and without exposure to divalent metals, have been investigated as a function of relative humidity. Atomic force microscopy (AFM) was used to understand topographical changes on the calcite surface due to the presence of divalent metal and exposure to different humid environments. Ion scattering spectroscopy (ISS) was used to determine the composition of the near and outermost surface of the calcite after exposure to Cd and Pb and before exposure to the varying humidity conditions. In general, the extent of topographical changes observed on the calcite surface increased with the humidity level, though the initial step density of the cleaved calcite surface affects the extent of surface restructuring. Pretreatment of the calcite surface with aqueous divalent Pb prior to humidity exposure did not appear to alter the humidity-induced structural changes that occurred on the calcite surface. In contrast, calcite pretreated with divalent Cd showed little topographical change following exposure to high humidity. The results suggest that while Pb forms surface precipitates on the calcite surface, Cd exhibits a stronger interaction with the step edges of the calcite surface, which inhibits the ability of the calcite surface to restructure when exposed to a high relative humidity environment.     

Specificity and sensitivity of fluorescence labeling of surface species

FLOSS (fluorescence labeling of surface species) enables one to identify and quantify very low concentrations of surface functional groups. Unlike most surface analytical techniques, FLOSS can provide absolute, as well as relative, surface coverage determination. However, as with any other surface derivatization technique, FLOSS provides a lower limit to surface coverage. The specificity of FLOSS for a particular functional group is the key to this application. In one FLOSS protocol, amine-modified dyes are used to label surface aldehyde groups. However, amine-modified dyes, in principle, can bind to both aldehyde and carboxyl groups, limiting specificity. In this paper, we report that the FLOSS protocol devised results in less than 0.5 % of the carboxyl-modified dyes binding to the surface amine groups. Therefore, the presence of carboxyl groups on the surface should have a limited effect on the detection of aldehyde groups by amine-modified dye. Quenching of fluorescence can potentially affect quantitative measurements. To address this issue, the densities of surface functional groups of CHO-, NH2-, and epoxy-coated glass surfaces were quantified using FLOSS and compared to surface densities estimated by other methods. The FLOSS technique was extended to glass surfaces by using visible absorbing and emitting dyes. The lower detection limit is on the order of 10(9) groups/cm2.     

Determination of the chemical nature of active surface sites present on bulk mixed metal oxide catalysts

CH3OH temperature programmed surface reaction (TPSR) spectroscopy was employed to determine the chemical nature of active surface sites for bulk mixed metal oxide catalysts. The CH3OH-TPSR spectra peak temperature, Tp, for model supported metal oxides and bulk, pure metal oxides was found to be sensitive to the specific surface metal oxide as well as its oxidation state. The catalytic activity of the surface metal oxide sites was found to decrease upon reduction of these sites and the most active surface sites were the fully oxidized surface cations. The surface V5+ sites were found to be more active than the surface Mo6+ sites, which in turn were significantly more active than the surface Nb5+ and Te4+ sites. Furthermore, the reaction products formed also reflected the chemical nature of surface active sites. Surface redox sites are able to liberate oxygen and yield H2CO, while surface acidic sites are not able to liberate oxygen, contain either H+ or oxygen vacancies, and produce CH3OCH3. Surface V5+, Mo6+, and Te4+ sites behave as redox sites, and surface Nb5+ sites are Lewis acid sites. This experimental information was used to determine the chemical nature of the different surface cations in bulk Mo-V-Te-Nb-Ox mixed oxide catalysts (Mo(0.6)V(1.5)Ox, Mo(1.0)V(0.5)Te(0.16)Ox, Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox). The bulk Mo(0.6)V(1.5)Ox and Mo(1.0)V(0.5)Te(0.16)Ox mixed oxide catalytic characteristics were dominated by the catalytic properties of the surface V5+ redox sites. The surface enrichment of these bulk mixed oxide by surface V5+ is related to its high mobility, V5+ possesses the lowest Tammann temperature among the different oxide cations, and the lower surface free energy associated with the surface termination of V=O bonds. The quaternary bulk Mo(1.0)V(0.3)Te(0.16)Nb(0.12)Ox mixed oxide possessed both surface redox and acidic sites. The surface redox sites reflect the characteristics of surface V5+ and the surface acidic sites reflect the properties normally associated with supported Mo6+. The major roles of Nb5+ and Te4+ appear to be that of ligand promoters for the more active surface V and Mo sites. These reactivity trends for CH3OH ODH parallel the reactivity trends of propane ODH because of their similar rate-determining step involving cleavage of a C-H bond. This novel CH3OH-TPSR spectroscopic method is a universal method that has also been successfully applied to other bulk mixed metal oxide systems to determine the chemical nature of the active surface sites.     

二氧化钛(TiO2)表面能的理论研究

用密度泛函理论和虚拟原子轨道方法对二氧化钛-金红石(TiO2)(110)表面的表面能进行了理论计算. 结果表明, 二氧化钛的表面能与表面缺陷的百分率相关. 完整的表面具有最低的表面能, 表面能随着表面缺陷百分率的增大而升高, 这与自然环境下二氧化钛-金红石(TiO2)具有规整的(110)表面一致. 在光催化实验中利用二氧化钛表面的缺陷作催化剂需要考虑到表面的稳定性. 另一方面, 在完整的表面五配位Ti4+上填加氧原子与表面作用时, 表面能起初变化很小, 直到50%的五配位Ti4+被填充后表面能才开始升高.     

应用表面光电压谱研究固体表面酸度

测量与亚带隙辐射相关的表面光电压谱可极其灵敏地得到固体表面态信息。固体表面酸与受体表面态相关。本文用近红外光辐射测试了分子筛和杂多酸的表面光电压,观察到在900～1500 nm光谱区有表面光电压响应。不同的峰位对应不同受体表面态位置,代表不同酸的强度;峰强度对应态密度,反映了酸总量。对初步结果也进行了理论分析。     

Determination of the surface pK of carboxylic- and amine-terminated alkanethiols using surface plasmon resonance spectroscopy

When using self-assembled monolayers (SAMs) with ionizable functional groups, such as COOH and NH2, the dissociation constant (pKd) of the surface is an important property to know, since it defines the charge density of the surface for a given bulk solution pH. In this study, we developed a method using surface plasmon resonance (SPR) spectroscopy for the direct measurement of the pKd of a SAM surface by combining the ability of SPR to detect the change in mass concentration close to a surface and the shift in ion concentration over the surface as a function of surface charge density. This method was then applied to measure the pKd values of both COOH- and NH2-functionalized SAM surfaces using solutions of CsCl and NaBr salts, respectively, which provided pKd values of 7.4 and 6.5, respectively, based on the bulk solution pH. An analytical study was also performed to theoretically predict the shape of the SPR plots by calculating the excess mass of salt ions over a surface as a function of the difference between the solution pH and surface pKd. The analytical relationships show that the state of surface charge also influences the local hydrogen ion concentration, thus resulting in a substantial local shift in pH at the surface compared to the bulk solution as a function of the difference between the bulk solution pH and the pKd of the surface.     

Effect of organic acid on lauroamide propyl betaine surface dilatational modulus and foam performance in a porous medium

The purpose of this work was to study the effect of surface tension and surface dilatational modulus on foam performance in high-salinity water in a porous medium. In order to clarify the role of the surface dilatational property in foam flow in a porous medium, three systems were established: a system with low surface dilatational modulus and high surface tension, a system with low surface dilatational modulus and low surface tension, and a system with high surface dilatational modulus and low surface tension. Measurement of dilatational modulus and surface tension showed that lauroamide propyl betaine (LAB) could not reduce surface tension and that surface dilatational modulus was low. The addition of lauric acid (LCOOH) to LAB could not achieve high surface dilatational modulus; however, it could reach lower surface tension. The addition of myristic acid (MCOOH) to LAB could achieve high surface dilatational modulus and lower surface tension. Unlike the other two systems, the results of a dilatational modulus comprised of a mixture of MCOOH and LAB were not a constant, as demonstrated by varied surface area deformation outcomes. With the increase of deformation, surface dilatational modulus decreased. Results of foam flow tests showed that among the two lower surface dilatational modulus systems, LAB foam had higher flow resistance regardless of flow rate. Among the two systems of similar lower surface tension, the mixture of LAB and MCOOH showed higher flow resistance than the mixture of LAB and LCOOH. However, with the increase of flow rate, pressure differences between the two systems became smaller, which corresponded to the decrease of surface dilatational modulus with an increase of deformation.     

Bayesian analysis of heterogeneity in the distribution of binding properties of immobilized surface sites

Once a homogeneous ensemble of a protein ligand is taken from solution and immobilized to a surface, for many reasons the resulting ensemble of surface binding sites to soluble analytes may be heterogeneous. For example, this can be due to the intrinsic surface roughness causing variations in the local microenvironment, nonuniform density distribution of polymeric linkers, or nonuniform chemical attachment producing different protein orientations and conformations. We previously described a computational method for determining the distribution of affinity and rate constants of surface sites from analysis of experimental surface binding data. It fully exploits the high signal/noise ratio and reproducibility provided by optical biosensor technology, such as surface plasmon resonance. Since the computational analysis is ill conditioned, the previous approach used a regularization strategy assuming a priori all binding parameters to be equally likely, resulting in the broadest possible parameter distribution consistent with the experimental data. We now extended this method in a Bayesian approach to incorporate the opposite assumption, i.e., that the surface sites a priori are expected to be uniform (as one would expect in free solution). This results in a distribution of binding parameters as close to monodispersity as possible given the experimental data. Using several model protein systems immobilized on a carboxymethyl dextran surface and probed with surface plasmon resonance, we show microheterogeneity of the surface sites in addition to broad populations of significantly altered affinity. The distributions obtained are highly reproducible. Immobilization conditions and the total surface density of immobilized sites can have a substantial impact on the functional distribution of the binding sites.     

Analysis of different approaches for evaluation of surface energy of microbial cells by contact angle goniometry

Microbial adhesion on solid substrate is important in various fields of science. Mineral-microbe interactions alter the surface chemistry of the minerals and the adhesion of the bacterial cells to mineral surface is a prerequisite in several biobeneficiation processes. Apart from the surface charge and hydrophobic or hydrophilic character of the bacterial cells, the surface energy is a very important parameter influencing their adhesion on solid surfaces. There were many thermodynamic approaches in the literature to evaluate the cells surface energy. Although contact angle measurements with different liquids with known surface tension forms the basis in the calculation of the value of surface energy of solids, the results are different depending on the approach followed. In the present study, the surface energy of 140 bacterial and seven yeast cell surfaces has been studied following Fowkes, Equation of state, Geometric mean and Lifshitz-van der Waals acid-base (LW-AB) approaches. Two independent issues were addressed separately in our analysis. At first, the surface energy and the different components of the surface energy for microbial cells surface are examined. Secondly, the different approaches are evaluated for their internal consistency, similarities and dissimilarities. The Lifshitz-van der Waals component of surface energy for most of the microbial cells is realised to be approximately 40 mJ/m2 +/-10%. Equation of state and Geometric mean approaches do not possess any internal consistency and yield different results. The internal consistency of the LW-AB approach could be checked only by varying the apolar liquid and it evaluates coherent surface energy parameters by doing so. The electron-donor surface energy component remains exactly the same with the change of apolar liquid. This parameter could differentiate between the Gram-positive and Gram-negative bacterial cells. Gram-negative bacterial cells having higher electron-donor parameter had lower nitrogen, oxygen and phosphorous content on their cell surfaces. Among the four approaches, LW-AB was found to give the most consistent results. This approach provides more detailed information about the microbial cell surface and the electron-donor parameter differentiates different type of cell surfaces.     

Modeling hydrophobic solvation of nonspherical systems: Comparison of use of molecular surface area with accessible surface area

It is shown that the molecular surface and the accessible surface lead to exactly the same results when calculating solvation free energies and transfer free energies, from methods using the surface tension as a parameter if the exact geometric curvature is used with the accessible surface. However, the use of the exact curvature is not necessarily the best approach chemically. Other modifications, including an approximate curvature improves the approach. Such modifications are difficult to include in methods in which the molecular surface rather than the accessible surface is used to calculate solvent effects. A modification of a Gaussian curvature term is necessary if dissociation is to be accounted for properly. The inclusion of a Gaussian curvature term, in addition to the usual mean curvature term, reconciles the difference in magnitude of the microscopic and macroscopic surface tension in the case of the accessible surface area. © 1997 by John Wiley & Sons, Inc.     

High surface area of porous silicon drives desorption of intact molecules

The surface structure of porous silicon used in desorption/ionization on porous silicon (DIOS) mass analysis is known to play a primary role in the desorption/ionization (D/I) process. In this study, mass spectrometry and scanning electron microscopy (SEM) are used to examine the correlation between intact ion generation with surface ablation and surface morphology. The DIOS process is found to be highly laser energy dependent and correlates directly with the appearance of surface ions (Si(n)(+) and OSiH(+)). A threshold laser energy for DIOS is observed (10 mJ/cm(2)), which supports that DIOS is driven by surface restructuring and is not a strictly thermal process. In addition, three DIOS regimes are observed that correspond to surface restructuring and melting. These results suggest that higher surface area silicon substrates may enhance DIOS performance. A recent example that fits into this mechanism is the surface of silicon nanowires, which has a high surface energy and concomitantly requires lower laser energy for analyte desorption.     

Molecular dynamics description of grafted monolayers: effect of the surface coverage

Molecular dynamics simulations of monolayers of metal-chelating ligands grafted onto a graphite surface in water are carried out to calculate structural (density profiles, radius of gyration, and asphericity coefficients), dynamical (diffusion coefficients), and energetical properties as a function of the surface coverage. The purpose is to provide a better understanding of the dependence of various properties of these monolayers on the surface coverage. A critical value of the surface coverage from which all structural properties derive a limiting value has been established. It also appears that the chains rather adopt an elongated conformation along the direction normal to the surface from this critical surface coverage. The hydrogen-bonding structure and dynamics of water molecules are reported. An ordered structure of water in the region close to the terminal groups of the grafted molecules is shown at a relatively high surface coverage. This ordering is similar to that observed in the case of water in interaction with a solid surface.     

On the size dependence of the surface energy of metal nanoclusters

The many-particle tight-binding potential has been employed to calculate the specific surface energy of icosahedral nanoclusters of transition metals. The equimolecular surface has been considered as the dividing surface. The surface energy has been shown to linearly increase with particle size at nanocluster radii smaller than five radii of the first coordination sphere. As the nanocluster radius is further enlarged, the surface energy passes through a maximum and approaches an asymptotic macroscopic value. The coefficients of proportionality between the specific surface energy and nanocluster radius have been found and compared with the data available from the literature.     

Measurement of the surface tension of liquid marbles

The capillary rise and Wilhelmy plate methods have been used to study the "surface tension" of water marbles encapsulated with polytetrafluoroethylene (PTFE) powders of 1-, 35-, and 100-μm particle size. With the capillary rise technique, a glass capillary tube was inserted into a water marble to measure the capillary rise of the water. The Laplace pressure exerted by the water marble was directly measured by comparing the heights of the capillary rise from the marble and from a flat water surface in a beaker. An equation based on Marmur's model was proposed to calculate the water marble surface tension. This method does not require the water contact angle with the supporting solid surface to be considered; it is therefore a simple but efficient method for determining liquid marble surface tension. The Wilhelmy method was used to measure the surface tension of a flat water surface covered by PTFE powder. This method offers a new angle for investigating liquid marble shell properties. A discussion on the nature and the realistic magnitude of liquid marble surface tension is offered.     

Some problems concerning the definition of a dividing surface and its influence on the calculation of thermodynamical parameters of small clusters

We discuss the influence of several definitions of the dividing surface on the size dependence of surface tension and surface stress. Among others we apply the original definition of Gibbs for the “surface of tension” (SOT) and the “equimolecular dividing surface” (EMDS). We show that from physical reasons the surface tension must only include curvature terms up to the quadratic term. The considerations are illustrated for microclusters of simple geometric configurations.     

Effect of SDBS solution on the surface potential properties of the Zhaozhuang coal

It is of great significance to study the effect of surfactants on the coal surface potential for effective dust suppression in mining faces. The effect of different concentrations of sodium dodecyl benzene sulfonate (SDBS) solution on the surface potential of the Zhaozhuang coal was measured by atomic force microscopy (AFM). The experimental results show that the SDBS solution has significant influence on the surface potential of the Zhaozhuang coal. The electrical characteristics of the coal surface at the nanometer scale are different from those of macroscopic or the mesoscopic level. The surface potential of coal is basically a normal distribution, showing certain electrical characteristics. The mean value of the surface potential of the Zhaozhuang coal is increased with the increase in concentration of the SDBS solution; when the concentration of the SDBS solution is 0.3%, the mean value of surface potential is 5.59 mv, which is about two times of the mean value of the surface potential without SDBS solution added. With the increase of the concentration of the SDBS solution, the maximum value of the surface potential of the Zhaozhuang coal increases, and the minimum value decreases. It shows that the SDBS solution has a significant effect on the potential distribution law and the magnitude of the coal surface. Subsequently, on the basis of the constructed Zhaozhuang coal macromolecule model, xtb and Multiwfn simulation software were used to calculate the molecular surface electrostatic potential value and electron density value of the Zhaozhuang coal molecules after adding water molecules. The variation law for the electrostatic potential surface of the molecule was obtained after adding numbers of water molecules to the surface of the coal molecule. The simulation results show that the area proportion of absolute molecular surface electrostatic potential greater than 10 kcal/mol is increased with the growth in the number of water molecules, while the area proportion of absolute molecular surface electrostatic potential less than 10 kcal/mol is decreased. Because of the free state O─H bond polarity of water molecules, the charges on the molecular surface are rearranged in order to change the electron density on the surface of coal molecules, which affects the overall electrostatic potential of the configuration.