普鲁兰多糖的硬脂酸修饰及其作为纳米药物载体的研究

利用1-(3-二甲氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)和4-二甲氨基吡啶(DMAP)催化硬脂酸(SA)与具有良好生物相容性的普鲁兰多糖(Pullulan)反应, 将硬脂酸接枝在普鲁兰分子链的羟基上, 得到取代度不同的疏水改性两亲性普鲁兰多糖衍生物PUSA1, PUSA2 及PUSA3, 其临界胶束浓度分别为50, 32, 18 μg/mL; 透射电镜(TEM)图像显示透析法制备的PUSA 自组装颗粒为球形. 以阿霉素为模型药物制备了PUSA 载药纳米粒, 考察了载药纳米粒的载药量、包封率和体外药物释放. 结果表明PUSA3 的包封率高达84%, 载药量达7.79%. 药物可在37 ℃, pH＝7.4 的PBS 溶液中持续释放90 h 以上. 细胞毒性实验(MTT)结果显示当PUSA 的浓度高达1000 μg/mL 时48 h 后细胞存活率依然在90%左右. 流式细胞及荧光分析表明载药纳米粒的细胞摄取率远远高于游离药物. 说明PUSA 是一种新型的有潜在应用价值的药物载体材料.     

含双疏水侧链聚磷酸酯脂质体膜材的合成

以季戊四醇二脂肪酸酯和Ｐ，Ｐ 二氯磷酸β 溴乙酯为单体，通过溶液缩聚反应合成聚磷酸酯，再经季铵化反应得到三种新的含双疏水侧链的磷脂酰胆碱型聚磷酸酯脂质体膜材．采用逆相蒸发法制备脂质体．电镜观察表明，所有聚合物都能形成脂质体，其直径为２～６μｍ．还研究了对抗肿瘤药物５ 氟脲嘧啶的包封，其包封率为３０％．     

尼古丁乙醇脂质体体外透皮特性研究

目的制备尼古丁乙醇脂质体并对其进行体内外评价。方法采用注入法制备尼古丁乙醇脂质体,以包封率为指标,考察乙醇浓度、磷脂含量对其包封率的影响;采用Franz扩散池进行离体皮肤渗透实验,测定接受液中尼古丁的累计渗透百分比。结果当处方中含3%磷脂和35%乙醇时制得的乙醇脂质体包封率最高(89.13±6.12)%;乙醇脂质体可有效增加药物的透皮量和穿透深度。结论乙醇脂质体能显著增加尼古丁的皮肤渗透性。     

两亲性壳聚糖衍生物的合成及其自聚集现象

以壳聚糖为主链, 聚乙二醇单甲醚为亲水性链段, 癸二酸为疏水链段, 合成了一系列两亲性壳聚糖衍生物. 通过FTIR, 1H NMR和X射线粉末衍射等手段对壳聚糖衍生物进行了结构表征, 由元素分析方法计算出衍生物的取代度. 采用直接溶解法制备了壳聚糖衍生物的空白胶束, 通过透射电子显微镜(TEM)观察了胶束的形态. 由动态光散射(DLS)测定了胶束的粒径及分布, 并以芘为分子探针, 通过荧光光谱法测定了壳聚糖衍生物的临界聚集浓度(CAC). 研究结果表明, 壳聚糖主链上疏水链段的取代度越大, 其衍生物的临界聚集浓度越低, 相同浓度下的胶束的粒径也越小.     

膜材性质及制备方法调控下的脂质体负载干扰素的研究

依据干扰素(IFN)分子、磷脂分子本身的理化性质和结构特点, 分别用三种制备方法, 以四种脂质体为膜材, 制备IFN脂质体, 考察了不同膜材、不同制备方法对脂质体粒径及包封率的影响. 结果表明, 以二肉豆蔻酰胆碱和二棕榈酰磷脂酰胆碱复合材料为主要膜材, 采用薄膜蒸发法制备的IFN脂质体有良好的稳定性, 60 d内其粒径可以保持在200~350 nm, 包封率可保持30%~40%.     

新型两亲性壳聚糖衍生物的合成、表征及对难溶性药物的增溶性

以天然可生物降解的壳聚糖为原料, 通过在壳聚糖6位羟基上引入羧甲基, 在2位氨基上引入疏水烷基链, 制得N-辛基-O,N-羧甲基壳聚糖(OCC)两亲性衍生物, 分别用FTIR、1H NMR和元素分析等技术对其结构进行表征, 用广角X射线衍射(WAXD)和差示扫描量热法(DSC)对其物理性质进行分析, 并考察其在各种溶剂中的溶解性能及其对难溶性药物的增溶能力. 所制备的OCC羧甲基取代度为115.9%, 取代主要发生在6位羟基上; 辛基取代度58.0%, 取代主要发生在2位氨基上; 与壳聚糖相比, OCC分子间/内氢键作用减弱; OCC在常用的有机溶剂中不溶, 但在水中溶解度增加, 能够形成具有淡蓝色乳光的纳米胶体溶液, 对难溶性抗肿瘤药物紫杉醇具有优越的增溶能力, 使紫杉醇在水中的溶解度提高近500倍, 载药量为34.6%(质量分数), 包封率为89.9%. OCC是潜在的优良的难溶性药物增溶载体材料.     

pH敏感两亲性嵌段聚合物的合成及其对新型抗生物膜药物的控释研究

采用ATRP技术,以PEG Br为大分子引发剂,2-二异丙氨基乙基甲基丙烯酸酯(DPA)为单体,合成了一种pH敏感两亲性嵌段聚合物PEG-b-PDPA,其结构经¹H NMR和GPC确证。采用超声乳化法制备了包载新型抗生物膜药物的聚合物载药胶束（1）,并研究了其结构和性能。结果表明：1的粒径均一、结构稳定,载药率和包封率分别为13.25%和79.50%。在酸性条件下（pH 5.5）, 1解组装并释放包裹在疏水“核层”的抗生物膜药物。     

微乳液法制备可共载水溶和脂溶药物的壳聚糖季铵盐乙醇脂质体的载药性能表征

采用微乳液法制备了可包载脂溶性和水溶性药物的羧甲基壳聚糖十八烷基季铵盐(OQCMC)乙醇脂质体,研究了OQCMC乙醇高分子脂质体的相图、粒径和电位、对药物的包封及释放能力及共载水溶性和脂溶性荧光染料后的细胞内递送能力.结果表明:OQCMC上长链季铵盐分子的取代度和共乳化剂乙醇的加入量对相图中微乳区域的面积影响不大;微乳液法可制备包载水溶性长春新碱(VCR)、脂溶性消炎痛(IMC)或二者共载的OQCMC载药微球,微球粒径为(52.40±0.55)nm,分布均匀;微乳液体系对VCR的最大载药率为22.7%,对IMC的最大载药率为20.1%,二者共载时,VCR的最大载药率为12.2%,IMC的最大载药率为10.0%;载药微球对药物具有缓控释功能.OQCMC乙醇高聚物脂质体可有效地包载荧光染料异硫氰酸荧光素FITC(水溶性)和尼罗红(脂溶性),并将二者递送到卵巢癌HO8901细胞内.     

超临界CO2法制备头孢唑啉钠脂质体

采用超临界CO2(scCO2)流体代替有机溶剂一步法制备了头孢唑啉钠药物载体脂质体. 研究了该脂质体的尺寸、稳定性和药物的包封率. 结果表明, 脂质体的尺寸和稳定性依赖于制备压力, 脂质体对头孢唑啉钠的包封率与乙醇和脂浓度有关, 采用超临界CO2法制备脂质体的药物包封率比采用薄膜分散法(Bangham method)制备的包封率高.     

聚乙烯基吡咯烷酮的可控制备及在紫杉醇药物递送体系中的应用

紫杉醇是一种有效的具有抗癌特性的天然化合物,但其自身的疏水性导致了临床应用的限制,为了解决这一问题,人们通常使用两亲性聚合物作为其药物递送的载体,以达到有效的药物包封和高效的药物递送。作为水溶性高分子的聚乙烯吡咯烷酮,因其具有优异的亲水性与生物相容性,常被用于与疏水链段结合形成两亲性共聚物,应用于紫杉醇药物递送系统。本文综述了近年来聚乙烯吡咯烷酮及其嵌段共聚物的可控制备方法,总结了其在紫杉醇药物缓释体系中的应用研究成果,并对综合性能更加优异的紫杉醇药物缓释载体的构建进行了展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.