苯并噻唑(啉)类润滑油添加剂的研究进展

苯并噻唑(啉)类添加剂是一类具有良好摩擦学性能、抗氧抗腐性能的环境友好型润滑油添加剂。本文对其摩擦学性能、抗氧抗腐性能和复配性能等方面做了系统评述,并对其研究和应用方面的问题作了初步总结,期望能够为苯并噻唑(啉)类润滑油添加剂的实际应用起到一定的指导作用。     

超声辅助制备表面修饰纳米Ca2B6O11及表征

纳米材料的制备及其应用于润滑油摩擦性能研究,对于改善油品的性能和延长设备的使用寿命具有重要的意义。首次采用超声辅助法合成了球型、粒径分布均匀的纳米硼酸钙润滑油添加剂并对其进行了表征。XRD结合热分析发现样品在室温下为非晶态,750℃结晶,且原料配比对晶态没有影响。SEM和TEM分析证明在超声波辅助下可以得到50 nm的超微粒子,而不用超声波的样品粒径为200~300 nm。在超声和搅拌下将2%的添加剂均匀分散在润滑油中,得到成品油。静置观察评价了润滑油的分散性和稳定性。在重负荷车辆与工业齿轮油中试验检验了润滑油的的润滑性能。结果表明,纳米硼酸钙添加剂具有良好的分散性、稳定性和抗磨减摩性能。     

丁二酰亚胺类分散剂体系的介观模拟研究

以润滑油添加剂丁二酰亚胺类分散剂的分散性能为研究目标，运用耗散粒子动力学介观模拟方法考察了分散剂结构、用量、与润滑油的相互作用等因素对分散性能的影响，并用分子模拟方法估算了模拟需要的介观参数.通过恰当地定义分散性能，选择合适的模型化合物，得到了与实验研究定性一致的模拟结果.为润滑油分散剂的分子设计提供有益的理论指导.     

高效液相色谱法测定合成航空润滑油中添加剂

为了提高使用性能,合成航空润滑油中一般加有多种添加剂。因此,分析测定添加剂的含量,不仅对产品的质量管理,而且对研究各油品的使用寿命、废油再生及其解剖分析等都有一定意义。 我们在前人工作的基础上,时常见的合成航空润滑油多种添加剂的高效液相色谱法的测定进行了研究(添加剂种类参见图1)。在采用回收率法进行     

硼酸盐晶体及其溶液结构研究现状

硼酸盐结构十分复杂,主要针对硼酸盐晶体结构和硼酸盐水溶液结构问题,总结了水合硼酸盐晶体结构及其结晶行为,归纳了硼酸盐水溶液中硼酸盐的主要存在形式及其结构研究,并侧重介绍和评价了电导/电势滴定、红外(IR)、拉曼光谱(Raman)、11B核磁共振等方法在硼酸盐溶液结构研究方面的进展,指出了未来的发展方向.     

新型汽车发动机油用添加剂的研究进展

本文介绍了汽车发动机油用添加剂尤其是多功能添加剂的发展概况、作用机理、种类、结构及应用效果，并对未来润滑油添加剂的发展方向提供了一些参考，为我国润滑油品的高档化发展提出了几点想法。     

硫化异丁烯的大气压化学电离质谱研究

在润滑油复合添加剂中,特别是各种齿轮油复合剂和工业用油复合剂中,硫化异丁烯是一种应用极为广泛的功能性添加剂.它通过在摩擦表面生成沉积膜、反应膜或渗透层,能减缓摩擦表面的摩擦和磨损,具有优异的极压抗磨性.尽管硫化异丁烯的使用十分广泛,但由于它本身是一种含不同硫原子化合物的混合物,且常常与复杂的石油产品基体和其它添加剂共存,对它的分离分析有很大的难度.在多年的润滑油复合添加剂结构组成研究工作中,笔者一直感到对硫化异丁烯的分离鉴定缺乏得力的分析技术和手段,传统的分离、分析方法很难将其与其它添加剂进行有效的分离和鉴定.     

润滑油纳米清净剂研究进展

润滑油纳米清净剂主要用于提高润滑油的使用性能,是当代内燃机油不可或缺的一类添加剂。本文对润滑油纳米清净剂制备过程及其制备机理的研究进展、不同纳米清净剂的性能、所用表面活性剂的发展趋势,尤其对纳米清净剂胶体微粒的组成结构、酸中和性能及抗磨性能的研究进展进行了综述,并提出了润滑油纳米清净剂今后的研究方向。     

表面修饰中空LaF3纳米微粒的制备及其摩擦学性能

在油酸钠/十六烷基溴化铵乳液体系中合成了表面修饰中空LaF3纳米微粒. 通过透射电子显微镜(TEM)、X射线衍射(XRD)、傅立叶变换红外光谱(FTIR)、热重分析(TG-DTG)、能谱分析(EDS)等测试手段对其结构和形貌进行了表征. 同时在四球摩擦磨损试验机上考察了LaF3纳米微粒作为润滑油添加剂时, 添加浓度和施加载荷对其抗磨减摩性能的影响. 结果表明, 此纳米微粒的表面为油酸修饰, 具有中空结构, 平均粒径约17.5 nm; 表面修饰中空油酸/三氟化镧纳米微粒作为成品润滑油的添加剂, 具有良好的抗磨性能. 另外, 对中空纳米微粒的形成机理进行了分析.     

表面修饰中空LaF3纳米微粒的制备及其摩擦学性能

在油酸钠,十六烷基溴化铵乳液体系中合成了表面修饰中空LaF3纳米微粒.通过透射电子显微镜(TEM)、X射线衍射(XRD)、傅立叶变换红外光谱(FTIR)、热重分析(TG-DTG)、能谱分析(EDS)等测试手段对其结构和形貌进行了表征.同时在四球摩擦磨损试验机上考察了LaF3纳米微粒作为润滑油添加剂时,添加浓度和施加载荷对其执磨减摩性能的影响.结果表明,此纳米微粒的表面为油酸修饰,具有中空结构,平均粒径约17.5nm;表面修饰中空油酸/三氟化镧纳米微粒作为成品润滑油的添加剂,具有良好的抗磨性能.另外,对中空纳米微粒的形机理进行了分析.     

The synthesis and reagent properties of tetrakis-(3,5-dichlorophenyl)borate

Cesium tetrakis(3,5-dichlorophenyl)borate shows similar precipitation and gravimetric properties as tetrakis(m-chlorophenyl)- and tetrakis(p-chlorophenyl)borates. Its overall stability is worse than those of the chloro-substituted borates but it is more stable toward acid attack.     

Synthesis and Investigation of Energetic Boron Compounds for Pyrotechnics

The energetic boron esters tris(1‐ethyl‐5‐aminotetrazolyl) borate, tris(2‐ethyl‐5‐aminotetrazolyl) borate, tris(1‐ethyltetrazolyl) borate, tris(2‐ethyltetrazolyl) borate, and tris(2‐(3‐nitro‐1, 2,4‐triazolyl)ethyl) borate were synthesized and analyzed by NMR and IR spectroscopy, elemental analysis, and mass spectrometry. Two tetracoordinate borates potassium tetrakis(3‐nitro‐1, 2,4‐triazolyl)borate and potassium bis(4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolyl)borate were synthesized and fully characterized as well. Moreover, the energetic and thermal properties of the energetic boron esters and tetracoordinate borates were determined. The ¹¹B NMR chemical shifts of potassium tetrakis(3‐nitro‐1, 2,4‐triazolyl)borate and potassium bis(4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolyl)borate were calculated and compared to the experimental values. Tris(1‐ethyl‐5‐aminotetrazolyl) borate was tested as colorant in pyrotechnic formulations with respect to the combustion behavior and color properties as well as the energetic and thermal properties.     

Borate esters as convenient reagents for direct amidation of carboxylic acids and transamidation of primary amides

Simple borates serve as effective promoters for amide bond formation with a variety of carboxylic acids and amines. With trimethyl or tris(2,2,2-trifluoroethyl) borate, amides are obtained in good to excellent yield and high purity after a simple work-up procedure. Tris(2,2,2-trifluoroethyl) borate can also be used for the straightforward conversion of primary amides to secondary amides via transamidation.     

Studies in qualitative inorganic analysis. V

Summary The interference of borate ion in the group separation of inorganic cations has been examined. Contrary to statements often made in text books, alkaline earth borates do not precipitate in Group III because they are soluble in the ammonium chloride present; Group IV metals [Zn, Co], which form more insoluble borates co-precipitate extensively in Group III when borate is present. It is essential, therefore, to remove most of the borate before precipitating Group III metals. A convenient-method for this removal is described.

---

Zusammenfassung Die störende Wirkung von Boration bei der Gruppentrennung anorganischer Kationen wurde untersucht. Im Gegensatz zu Feststellungen vieler Lehrbücher fallen Erdalkaliborate nicht in der 3. Gruppe aus, da sie in Ammoniumchlorid löslich sind. Metalle der 4. Gruppe (Zn, Co), die schwerer lösliche Borate bilden, fallen bei Gegenwart von Borat weitgehend in der 3. Gruppe aus. Es ist daher wichtig, Borat vor der Fällung der 3. Gruppe größtenteils zu entfernen. Eine dazu geeignete Methode wird beschrieben.

---

Résumé L'effet perturbateur de l'ion borate dans la séparation par groupes des cations minéraux a été étudié. Contrairement à ce qu'on peut lire souvent dans les livres d'analyse les borates alcalino-terreux ne précipitent pas dans le groupe III car ils sont solubles dans le chlorure d'ammonium qui est présent; les métaux du groupe IV (Zn, Co), qui donnent lieu à formation de borates plus insolubles, coprécipitent abondamment avec le groupe III en présence de borate. En conséquence, il est nécessaire d'éliminer la plus grande partie du borate avant de précipiter les métaux du groupe III. Les auteurs décrivent une méthode commode permettant de procéder à cette élimination.

---

---

Part IV: Mikrochim. Acta [Wien] 1957, 137.     

Syntheses and crystal structures of two new bismuth hydroxyl borates containing [Bi2O2]2+ layers: Bi2O2[B3O5(OH)] and Bi2O2[BO2(OH)

Two new bismuth hydroxyl borates, Bi(2)O(2)[B(3)O(5)(OH)] (I) and Bi(2)O(2)[BO(2)(OH)] (II), have been synthesized under hydrothermal conditions. Their structures were determined by single-crystal and powder X-ray diffraction data, respectively. Compound I crystallizes in the orthorhombic space group Pbca with the lattice constants of a = 6.0268(3) ?, b = 11.3635(6) ?, and c = 19.348(1) ?. Compound II crystallizes in the monoclinic space group Cm with the lattice constants of a = 5.4676(6) ?, b = 14.6643(5) ?, c = 3.9058(1) ?, and β = 135.587(6)°. The borate fundamental building block (FBB) in I is a three-ring unit [B(3)O(6)(OH)](4-), which connects one by one via sharing corners, forming an infinite zigzag chain along the a direction. The borate chains are further linked by hydrogen bonds, showing as a borate layer within the ab plane. The FBB in II is an isolated [BO(2)(OH)](2-) triangle, which links to two neighboring FBBs by strong hydrogen bonds, resulting in a borate chain along the a direction. Both compounds contain [Bi(2)O(2)](2+) layers, and the [Bi(2)O(2)](2+) layers combine with the corresponding borate layers alternatively, forming the whole structures. These two new bismuth borates are the first ones containing [Bi(2)O(2)](2+) layers in borates. The appearance of Bi(2)O(2)[BO(2)(OH)] (II) completes the series of compounds Bi(2)O(2)[BO(2)(OH)], Bi(2)O(2)CO(3), and Bi(2)O(2)[NO(3)(OH)] and the formation of Bi(2)O(2)[B(3)O(5)(OH)] provides another example in demonstrating the polymerization tendency of borate groups.     

Low-toxicity boron-containing fire-retardant additives for polymeric coatings

The possibility of using borates as fire retardants was examined. For polymeric materials prepared at high temperatures, a new zinc borate, trizinc decaborate monohydrate, was suggested.     

An Unprecedented Antimony(III) Borate with Strong Linear and Nonlinear Optical Responses

Antimony(III) borates with a stereochemical active lone pair remained unknown, although the first antimony borate was reported more than twenty years ago. Now, the first antimony(III) borate in a closed system is successfully synthesized, namely SbB₃O₆. Remarkably, SbB₃O₆ not only exhibits an exceptional linear optical response, that is, birefringence of Δn=0.290 at the wavelength of 546 nm, which is the largest among borates, but also has a strong nonlinear optical response of 3.5 times larger than the benchmark KH₂PO₄, exceeding those of most borates. Theoretical calculations reveal that the coexistence of strong linear and nonlinear optical responses in SbB₃O₆ should be attributable to the synergistic effect of π‐conjugated B?O anionic groups and Sb³⁺ with stereochemically active lone pair. This work provides a new class of optical bi‐functional materials with potential prospects in integrated optical devices.     

Anthracene‐sensitized polymerization of vinyl ethers by onium tetrakis(pentafluorophenyl)borate initiators

Cationic photopolymerization of vinyl ethers by the sensitized photolysis of onium tetrakis(pentafluorophenyl)borate initiators has been investigated in this study. The onium borates were sensitized by anthracene and initiated the photopolymerization of the vinyl ethers. The rate of polymerization increased with the decrease in the free‐energy change from the excited singlet state of anthracene to the onium cation of the onium borates. The acid generated by the decomposition of the onium borates formed nonacidic products by heating. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 982–987, 2000     

A non-cryogenic method for the preparation of 2-(indolyl) borates,silanes, and silanols

2-Indolyl borates are prepared via addition of LDA to a mixture of N-Boc-indole and triisopropyl borate at 0-5 degrees C. Following acidic hydrolysis, the boronic acids are isolated by crystallization in good to excellent yield (73-99%). The method is quite general, tolerating a wide range of functional groups, and also provides access to 2-silyl derivatives (80-91%).