硫化物-高分子复合微球表面形貌与模板组成关系的研究

以N-异丙基丙烯酰胺(NIPAM)和甲基丙烯酸(MAA)为单体, 通过反相悬浮聚合法制备了多种MAA含量不同的阴离子型P(NIPAM-co-MAA)共聚微凝胶. 以这些共聚微凝胶为模板, 在不同表面活性剂存在下, 合成了一系列CuS(CdS、ZnS)-P(NIPAM-co-MAA)无机-有机复合微球材料, 研究了表面活性剂种类, 模板组成等因素对上述硫化物-高分子复合微球表面形貌的影响. 结果表明, 实验条件下所得复合微球表面均具有图案化结构, 该结构明显依赖于表面活性剂的种类和模板微凝胶的组成. 就模型体系而言, 随表面活性剂Span-20、Span-80和Span-85的HLB(亲水亲油平衡)值降低, 微球表面形貌趋于粗糙, 但仍然十分规整; 就模板组成而言, 模板中MAA含量增加使得复合微球的表面形貌变得更加精细. 据此, 认为通过选用合适的表面活性剂和微凝胶模板可以在一定范围内调控这些无机-有机复合微球的表面形貌, 从而为后续应用研究奠定基础.     

碳纳米管/壳聚糖复合微球的原位仿生矿化及表征

对碳纳米管(CNTs)进行酸化处理, 采用乳化交联法制备CNTs/壳聚糖(CS)复合微球, 在其表面诱导羟基磷灰石仿生合成, 研究了CNTs对复合微球仿生矿化的影响, 并与纯CS微球的仿生矿化进行了对比. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 溶胀率和含水率测试等考察了复合微球矿化前后的形貌特征、 物相结构及稳定性. 结果表明, 在相同时间下, CNTs/CS复合微球表面纳米羟基磷灰石的形成能力明显优于纯CS微球, 且形态稳定性更高. 细胞实验结果表明, 与MG63细胞共培养7 d时, 矿化复合微球细胞增殖明显.     

单分散聚苯乙烯微球的表面皱纹化

首先制备了不同粒径的未交联的单分散聚苯乙烯(PS)微球;而后通过离子溅射技术在PS微球表面沉积了一层均匀光滑的铂(Pt)壳层,得到了PS-Pt核壳结构的复合微球;最后借用溶剂溶胀法诱导微球表面起皱的发生,从而制备了表面带有皱纹微结构形貌的PS微球.系统考察了微球表面Pt层厚度(t)、微球粒径(D)、溶剂组成(即溶胀度)等因素对球面起皱和皱纹形貌的影响,获得了球面皱纹周期与Pt层厚度的指数关系;结合理论分析了其起皱行为,实验结果与理论分析相吻合.此外,将表面起皱与表面等离子体刻蚀技术相结合,实现了表面带有纳米点状凸起与皱纹复合微结构形貌的PS微球的可控制备.     

新颖表面结构的脲醛树脂-聚丙烯酰胺复合微球的制备研究

将高分子微凝胶模板法应用于制备脲醛树脂[Urea-formaldehyde resin (UF Resin)]-聚丙烯酰胺[Polyacrylamide (PAM)]有机-有机复合微球材料. 以PAM高分子微凝胶为模板, 通过控制甲醛和尿素的缩聚反应在反相悬浮体系中进行, 制备得到了具有新颖表面形貌的脲醛树脂-聚丙烯酰胺[UF Resin/PAM]有机-有机复合微球, 利用扫描电子显微镜(SEM)、热重分析(TGA)、红外(FT-IR)等手段对复合微球进行了表征. 实验结果表明, 复合微球的表面形貌与甲醛和尿素溶液的pH值、甲醛和尿素溶液的浓度、甲醛和尿素的摩尔比、模板的组成等因素有关. 可以预期, 本研究方法将为制备具有特异表面形貌的有机-有机复合微球材料提供了一条有效的途径.     

基于纳米氢氧化镁稳定的Pickering乳液悬浮聚合制备盔甲结构聚苯乙烯@氢氧化镁复合微球

以苯乙烯为单体、 偶氮二异丁腈(AIBN)为引发剂、 片状纳米氢氧化镁(MH)为Pickering稳定剂, 采用悬浮聚合法制备盔甲结构的聚苯烯@氢氧化镁(PS@MH)复合微球. 采用扫描电子显微镜(SEM)、 能谱分析(EDS)、 傅里叶变换红外光谱(FTIR)、 X射线衍射(XRD)、 热失重分析(TGA)和微型燃烧量热分析(MCC)等对PS@MH复合微球进行表征, 确认了其形貌和结构: 纳米氢氧化镁紧密包覆在聚苯乙烯微球表面, 形成了以纳米氢氧化镁为外层、 聚苯乙烯为内球的盔甲结构复合微球; 同时证明了具有盔甲结构的PS@MH复合微球能降低热释放速率, 抑制聚合物的降解. 该方法操作简单, 成本低廉, 制得的盔甲结构PS@MH复合微球粒径尺寸小、 分布窄, 球形度较高.     

制备方法对模板法制备SiO_2中空微球形貌的影响

模板法是制备无机中空微球的重要方法之一.首先通过苯乙烯和甲基丙烯酸的无皂乳液聚合法制得表面含羧基、粒径为360nm的单分散聚苯乙烯(PSt)乳胶粒,并以此为模板,分别采用表面改性-前驱体水解法(PHC)和SiO2纳米颗粒层层自组装法(LBL),制备出了不同壳层厚度的PSt/SiO2核壳结构复合微球,然后经500℃煅烧4h,得到SiO2中空微球.利用透射电镜和扫描电镜对微球结构形态进行了表征.研究表明,首先利用γ-氨丙基三乙氧基硅烷(KH-550)对PSt模板微球进行表面改性、然后再在乙醇-水混合介质中进行原硅酸乙酯(TEOS)水解与缩合反应的PHC法,是制备PSt/SiO2核壳结构复合微球的简便方法,复合微球经煅烧可制得表面均匀、结构致密、壳层厚度和形貌可控的SiO2中空微球;而LBL法制备PSt/SiO2核壳结构复合微球的工艺复杂,煅烧后所得SiO2中空微球结构疏松,易于破碎.     

啶虫脒/二氧化硅复合微球的原位制备与缓释性能

利用正硅酸乙酯(TEOS)的原位水解缩合反应制备了啶虫脒/二氧化硅复合微球。采用FTIR、XRD、TG、SEM、DSC和粒度分析仪对复合微球的结构进行了表征,并探究了复合微球的释药行为。结果表明,所合成的复合微球是非晶态的,啶虫脒是以非晶相存在于复合微球中。复合微球呈现规则的球形形貌,微球粒径约为500-800 nm。微球具有良好的缓释性能,其释药行为可用Higuchi方程来描述,药物释放是扩散控制释放。     

苯乙烯和N-乙烯基吡咯烷酮共聚物/Ag复合微球的制备及性能研究

首先用无皂乳液聚合法制备了单分散聚苯乙烯(PSt)乳液,以此为种子乳液,使用N,N-亚甲基双丙烯酰胺(MBA)为交联剂,过硫酸钾(KPS)为引发剂,进行苯乙烯和N-乙烯基吡咯烷酮(NVP)共聚合制备了以PSt为核、St和NVP共聚物为壳的具有核-壳结构的聚合物微球(P(St-NVP)).以此微球为模板通过化学沉积法得到了粒径分布均匀、单分散的P(St-NVP)/Ag复合微球.傅里叶红外光谱、X-射线衍射、扫描电镜、透射电镜、激光粒度仪和紫外-可见光谱对复合微球的结构、形貌、物相及催化性能进行了表征.结果表明,P(St-NVP)/Ag复合微球具有规则的球形结构,粒径在400～700 nm之间,随交联剂浓度或种子乳液浓度的增加,复合微球粒径减小.粒径在十几个纳米左右的银粒子均匀分布在微球表面和内部.载银复合微球在NaBH4还原4-硝基苯酚为4-氨基苯酚的模型反应中表现出较高的催化活性.     

磁场-温度双重响应性复合微球的制备与表征

采用部分还原共沉淀法制备了尺寸约为10 nm的Fe₃O₄磁性纳米粒子, 并用油酸对其进行表面改性, 通过无皂乳液聚合的方法将Fe₃O₄与温敏性N-异丙基丙烯酰胺-丙烯酰胺共聚物(PNIPAAm-co-Am)复合, 获得了具有磁场和温度双重响应的复合微球. 采用TEM, FTIR和XRD等方法研究了复合微球的结构与形貌, 分别采用动态激光光散射(DLS)和振动样品磁强计(VSM)表征了复合微球的温度响应性和磁场响应性. 结果表明, 所制备的Fe₃O₄/(PNIPAAm-co-Am)复合微球具有核壳结构, 尺寸约为100 nm, 该微球具有良好的磁响应性和温度响应性, 其最低临界溶解温度(LCST)约为40 ℃.     

多层核-壳结构P(AM-co-MAA)/W/UF复合微球制备研究

以反相悬浮聚合技术合成的丙烯酰胺(acrylamide,AM)和甲基丙烯酸(methacrylic acid,MAA)共聚高分子微凝胶P(AM-co-MAA)为模板,通过离心沉积法将微米级钨粉沉积于高分子微凝胶表面,得到具有核-壳结构的P(AM-co-MAA)/W复合微球材料;再以P(AM-co-MAA)/W复合微球为模板,通过控制甲醛和尿素的缩聚反应在模板与油/水相界面进行,制备得到了具有多层核-壳结构的高分子/钨/脲醛树脂[P(AM-co-MAA)/W/Urea-formaldehyde resin]复合微球材料.利用扫描电子显微镜(SEM)、红外(FT-IR)、X射线衍射(XRD)和热分析(TGA)等手段对复合微球进行了表征.实验结果表明,外壳层脲醛树脂的包覆量、复合微球的表面形貌可通过改变甲醛和尿素溶液的浓度、甲醛和尿素的物质的量之比等因素进行控制.复合微球的导电性测试结果表明,P(AM-co-MAA)/W复合微球表面壳层脲醛树脂包覆前后,其电导率由1.9×10-3降低为0.9×10-8S·m-1.该研究获得的三层核-壳复合微球材料其外层脲醛树脂的包覆较为完整、致密,其导电性接近于绝缘材料,为含钨复合微球作为电子元件的抗辐射涂层材料打下了基础.     

控制自由基聚合制备Fe3O4/SiO2/P(AA-MMA-St)磁性复合微球

用原硅酸乙酯对Fe3O4纳米粒子进行表面改性得到Fe3O4/SiO2磁流体.在Fe3O4/SiO2磁流体存在下,以1,1-二苯基乙烯(DPE)为自由基聚合控制剂,利用乳液聚合法制备了Fe3O4/SiO2/P(AA-MMA-St)核-壳磁性复合微球.用红外光谱(FTIR)、振动样品磁强计(VSM)、透射电镜(TEM)、X光电子能谱(XPS)、热重分析(TGA)、示差扫描量热仪(DSC)对所制备的磁流体、磁性高分子复合微球的结构、形态、性能进行了表征.研究发现,原硅酸乙酯水解后能在Fe3O4表面形成硅膜保护层从而避免Fe3O4的酸蚀,使Fe3O4/SiO2/P(AA-MMA-St)复合微球的比饱和磁化强度比同样条件下制备的Fe3O4/P(AA-MMA-St)微球提高了28%;DPE能有效控制自由基在Fe3O4/SiO2磁流体表面均匀地引发单体聚合,得到平均粒径为422 nm,无机粒子含量为40%,比饱和磁化强度为34.850 emu/g,表面羧基含量为0.176 mmol/g的磁性复合微球.     

Preparation and Properties of Magnetic-fluorescent Microporous Polymer Microspheres

Microporous microspheres can be used as functional nanomaterial carriers for their microporous structure and higher specific surface area. In this study, magnetic fluorescent polymer microspheres were prepared by incorporating Fe₃O₄ nanoparticles and CdSe/ZnS quantum dots(QDs) into hyper-crosslinked microporous polymer microspheres(HCMPs) via the in situ coprecipitation method and swelling-diffusion. The HCMPs predominantly have micropores, and their specific surface area is as high as 703.4 m²/g. The magnetic-fluorescent microspheres maintain the superparamagnetic behavior of Fe₃O₄, and the saturation magnetization reaches 38.6 A·m²/kg. Moreover, the composite microspheres exhibit an intense emission peak at 530 nm and achieve good fluorescence.     

分散聚合研究

介绍了分散聚合制备聚合物微球的研究进展，对分散聚合的成核与稳定机理、聚合过程、动力学、反应参数对聚合物微球粒径及分散性的影响以及运用分散聚合制备功能性聚合物微球及聚合物－－磁性材料复合微球的研究现状进行了回顾。     

稀土／高分子复合材料的研究进展

详述了稀土／高分子复合材料的特异性能。着重说明了该复合材料的射线屏蔽性能和磁性能。指出稀土／高分子复合材料在X射线屏蔽应用中可有效弥补铅的弱吸收区;具有高稀土含量的复合高分子屏蔽材料具有强的热中子吸收能力;含稀土的共聚物具有强顺磁性,提出了制备磁性和磁智能稀土／高分子复合材料的可行性。此外,概述了稀土／高分子复合材料的3种主要制备方法：聚合法,简单掺混法和反应加工法。分析了稀土／高分子配位前体结构和配位数目对光性能的影响;指出了稀土／高分子复合材料可能具有的离聚物结构及其特征;提出原位生成稀土／高分子纳米复合结构的可行性,还对稀土／高分子复合材料的结构与性能的关系进行了详细的探讨,并对制备稀土／高分子复合材料所存在的问题进行了一定的说明。     

Hydrothermal Synthesis and Characterization of Carbohydrate Microspheres Coated with Magnetic Nanoparticles

Carbohydrate microspheres coated with magnetic nanoparticles were prepared by hydrothermal synthesis where a species of carbohydrate, such as vitamin C, glucose, and soluble starch, were used to obtain microsphere templates as the core of the composite microspheres. The dimension of the carbohydrate microspheres could be well controlled by adjusting the concentration of the starting material, the temperature, and the reaction time. The morphology of the magnetic composite microspheres was characterized by field‐emission scanning electron microscopy (FE‐SEM). The composition, as well as the structure of the composite microspheres, was confirmed by Fourier transform infrared spectroscopy (FTIR) and x‐ray diffraction (XRD).     

高Fe_3O_4含量单分散P(St/AA)复合微球的合成与表征

在表面由十一烯酸和油酸共同修饰的Fe3O4磁流体存在下,以苯乙烯(St)和丙烯酸(AA)为共聚单体,用细乳液聚合法,制备了单分散,高Fe3O4含量,且表面带有羧基的超顺磁性高分子复合微球.采用透射电镜(TEM),热重分析(TGA),物性测量系统(PPMS),Zeta电位以及红外光谱等手段对磁性复合微球的各项性能进行表征.结果表明,Fe3O4粒子的表面改性是影响复合微球Fe3O4含量及形貌的关键因素.在优化的实验条件下,可以制得Fe3O4含量高达77wt%,平均粒径为137·9nm,表面羧基密度0·0894mmol/g,比饱和磁化强度为44·7emu/g的单分散超顺磁性高分子复合微球.     

An electrically controlled light-scattering device based on liquid crystal/polymer microsphere composites

ABSTRACT

There is a widely applied prospect of electrical controlled liquid crystal (LC) light-scattering device. Numerous electrical controlled LC light-scattering technologies have been studied, but each technology has its own shortcomings, such as high driving voltage, high hysteresis, complex electrode structure, and serious heating. In this work, the composite of LC and polymer microspheres are used to fabricate light-scattering devices. This device is operated by the vertical electric field and does not require complex preparation process. LC/polymer microsphere composite has the advantages of low driving voltage and zero hysteresis. The role of microspheres in the composites is to change the size and density of a refractive-index-mismatched micro-domain. The effects of the ratio, particle size, and refractive index of microspheres on the optical characteristics of a composite are studied. The normal directional light transmittance at the transparent state and light-scattering state decreases with an increasing weight ratio of microspheres. The particle size of microspheres has negligible influence on the electro-optical properties of composites when the weight ratio of microspheres is small. The LCs doped with Polymethylsilsesquioxane (PMSQ) microspheres or polymethyl methacrylate (PMMA) microspheres are compared, and the mismatched refractive index and density of micro-domain show the influence on the electro-optical properties of the composites.     

Facile method for synthesis of hollow porous magnetic microspheres with controllable structure

Hollow porous magnetic microspheres with strong magnetization and controllable structure were prepared via a facile electrostatic self-assembly of the positively charged Fe(3)O(4) nanoparticles onto the surface of the negatively charged poly(N,N'-methylenebisacrylamide-co-methacrylic acid) (P(MBAAm-co-MAA)) microspheres with subsequent removal of the polymer core through calcination at high temperature. The shell thickness was facilely tuned through the ratio between Fe(3)O(4) and polymer, and the void space was conveniently changed through the size of polymer microspheres. The hollow magnetic microspheres possessed high saturation magnetization value (51.38 emu/g) and porous structure with high specific surface area (108.04 m(2)/g). Based on these properties, the drug loading and release behaviors were investigated, which indicated that the hollow magnetic microspheres exhibited a controlled release process.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004