Electronic structures of ruthenium and osmium complexes of 9,10-phenanthrenequinone

The reaction of 9,10-phenanthrenequinone (PQ) with [M(II)(H)(CO)(X)(PPh(3))(3)] in boiling toluene leads to the homolytic cleavage of the M(II)-H bond, affording the paramagnetic trans-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 1; M = Os, X = Br, 3) and cis-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 2; M = Os, X = Br, 4) complexes. Single-crystal X-ray structure determinations of 1, 2·toluene, and 4·CH(2)Cl(2), EPR spectra, and density functional theory (DFT) calculations have substantiated that 1-4 are 9,10-phenanthrenesemiquinone radical (PQ(?-)) complexes of ruthenium(II) and osmium(II) and are defined as trans-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (1), cis-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (2), trans-[Os(II)(PQ(?-))(PPh(3))(2)(CO) Br] (3), and cis-[Os(II)(PQ(?-))(PPh(3))(2)(CO)Br] (4). Two comparatively longer C-O [average lengths: 1, 1.291(3) ?; 2·toluene, 1.281(5) ?; 4·CH(2)Cl(2), 1.300(8) ?] and shorter C-C lengths [1, 1.418(5) ?; 2·toluene, 1.439(6) ?; 4·CH(2)Cl(2), 1.434(9) ?] of the OO chelates are consistent with the presence of a reduced PQ(?-) ligand in 1-4. A minor contribution of the alternate resonance form, trans- or cis-[M(I)(PQ)(PPh(3))(2)(CO)X], of 1-4 has been predicted by the anisotropic X- and Q-band electron paramagnetic resonance spectra of the frozen glasses of the complexes at 25 K and unrestricted DFT calculations on 1, trans-[Ru(PQ)(PMe(3))(2)(CO)Cl] (5), cis-[Ru(PQ)(PMe(3))(2)(CO)Cl] (6), and cis-[Os(PQ)(PMe(3))(2)(CO)Br] (7). However, no thermodynamic equilibria between [M(II)(PQ(?-))(PPh(3))(2)(CO)X] and [M(I)(PQ)(PPh(3))(2)(CO)X] tautomers have been detected. 1-4 undergo one-electron oxidation at -0.06, -0.05, 0.03, and -0.03 V versus a ferrocenium/ferrocene, Fc(+)/Fc, couple because of the formation of PQ complexes as trans-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (1(+)), cis-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (2(+)), trans-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (3(+)), and cis-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (4(+)). The trans isomers 1 and 3 also undergo one-electron reduction at -1.11 and -0.96 V, forming PQ(2-) complexes trans-[Ru(II)(PQ(2-))(PPh(3))(2)(CO)Cl](-) (1(-)) and trans-[Os(II)(PQ(2-))(PPh(3))(2)(CO)Br](-) (3(-)). Oxidation of 1 by I(2) affords diamagnetic 1(+)I(3)(-) in low yields. Bond parameters of 1(+)I(3)(-) [C-O, 1.256(3) and 1.258(3) ?; C-C, 1.482(3) ?] are consistent with ligand oxidation, yielding a coordinated PQ ligand. Origins of UV-vis/near-IR absorption features of 1-4 and the electrogenerated species have been investigated by spectroelectrochemical measurements and time-dependent DFT calculations on 5, 6, 5(+), and 5(-).     

Ligand effects in the syntheses and structures of novel heteroleptic and homoleptic bismuth(III) formamidinate complexes

Metathesis reactions of the alkali metal formamidinates M(RNC(H)NR), M = Li or K; R = C(6)H(3)-2,6-Pr(i)(2) (L(1)), C(6)H(3)-2,6-Et(2) (L(2)); C(6)H(2)-2,4,6-Me(3) (L(3)), C(6)H(3)-2,6-Me(2) (L(4)) or C(6)H(4)-2-Ph (L(5)), with BiX(3) (X = Cl or Br) gave a range of bismuth(iii) formamidinate complexes [Bi(L)Br(micro-Br)(thf)](2) (L = L(1), L(4)), [{Bi(L(1))Cl(2)(thf)}(2)Bi(L(1))Cl(2)], [Bi(L)(2)X] (L = L(2), L(5), X = Br; L = L(1), X = Cl), and [Bi(L)(3)] (L = L(2), L(3)). An analogous organometallic complex Bi(L(1))(2)Bu(n) was also isolated as a side product in one instance. Structural characterisation of the di-halide complexes show symmetrical dimers for X = Br, with two bromide bridges, and a coordinated thf molecule on each Bi atom, whereas for X = Cl a thf deficient species was crystallised, and has a weakly associated trinuclear array with two coordinated thf molecules per three Bi atoms. Complexes of the form Bi(L)(2)X (X = Br, Cl, Bu(n)) and Bi(L)(3) all have monomeric structures but the Bi(L)(3) species show marked asymmetry of the formamidinate binding, suggesting that they have reached coordination saturation.     

A new series of homoleptic,paramagnetic organochromium derivatives: synthesis,characterization, and study of the magnetic properties

The synthesis and characterization of the triad of organochromium derivatives [Cr(C(6)Cl(5))(4)](n-) (n=0, 1, 2) are described. By treating [CrCl(3)(thf)(3)] with LiC(6)Cl(5) in 1:5 molar ratio, the salt [Li(thf)(4)][Cr(III)(C(6)Cl(5))(4)] (1) was obtained as a violet solid in 57 % yield. Oxidation of 1 with [N(4-BrC(6)H(4))(3)][SbCl(6)] yielded the neutral complex [Cr(IV)(C(6)Cl(5))(4)] (2) as a brown solid in 71 % yield. The arylation of [CrCl(2)(thf)] with LiC(6)Cl(5) under similar conditions as above gave [[Li(thf)(3)](2)(mu-Cl)](2)[Cr(II)(C(6)Cl(5))(4)] (3) as an extremely air- and water-sensitive red solid in 47 % yield. The crystal and molecular structures of 1 and 3 have been established by X-ray diffraction methods. Complex 3 contains the unusual cation [[Li(thf)(3)](2)(mu-Cl)](+) with an almost linear Li-Cl-Li unit (174.2(6)degrees). All four C(6)Cl(5) groups are sigma-bonded to the Cr(II) center, which is located in a square-planar environment. The local geometry around the Cr(III) center in 1 is, in turn, pseudo-octahedral, since two of the C(6)Cl(5) groups act as standard sigma-bonded monodentate ligands, while the other two act as small-bite didentate ligands coordinated through both the ipso-C and one of the ortho-Cl atoms. Compounds 1-3 are paramagnetic with maximum spin multiplicity each (EPR and magnetization measurements).     

Expanding the tools available for direct ortho cupration--targeting lithium phosphidocuprates

Reaction of in situ generated lithium phosphides with 0.5 eq. Cu(I) is employed as a means of targeting lithium phosphidocuprates of either Gilman- or Lipshutz-type formulation--e.g., (R(2)P)(2)CuLi·n(LiX) (n = 0, 1). For R = Ph, X = CN in toluene followed by thf or R = Ph, X = I in thf/toluene an unexpected product results. [(Ph(2)P)(6)Cu(4)][Li·4thf](2)1 reveals an ion-separated structure in the solid state, with solvated lithium cations countering the charge on an adamantyl dianion [(Ph(2)P)(6)Cu(4)](2-). Deployment of R = Ph, X = CN in thf affords a novel network based on the dimer of Ph(2)PCu(CN)Li·2thf 2 with trianions based on 6-membered (PCu)(3) rings acting as nodes in the supramolecular array and solvated alkali metal counter-ions completing the linkers. Cy(2)PLi (Cy = cyclohexyl) has been reacted with CuCN in thf/toluene to yield Gilman-type lithium bis(phosphido)cuprate (Cy(2)P)(2)CuLi·2thf 3 by the exclusion of in situ generated LiCN. A polymer is noted in the solid state.     

Confinement of halide ions within homologous inverse coordination hosts; modification of halide-ion selectivity

The structures of a series of spherical host-guest complexes [{MeE(PPh)(3)Li(4)·3thf}(4)(μ(4)-X)](-) (E = Al, [1X](-); E = Ga, [2X](-); E = In, [3X](-)) reveal that changing the halide ions (X = Cl, Br, or I) within their central tetrahedral Li(4) sites has negligible effect on the structural parameters.     

Bending, twisting, and breaking CuCN chains to produce framework materials: the reactions of CuCN with alkali-metal halides

The reactions of the low-temperature polymorph of copper(I) cyanide (LT-CuCN) with concentrated aqueous alkali-metal halide solutions have been investigated. At room temperature, KX (X = Br and I) and CsX (X = Cl, Br, and I) produce the addition products K[Cu(2)(CN)(2)Br].H(2)O (I), K(3)[Cu(6)(CN)(6)I(3)].2H(2)O (II), Cs[Cu(3)(CN)(3)Cl] (III), Cs[Cu(3)(CN)(3)Br] (IV), and Cs(2)[Cu(4)(CN)(4)I(2)].H(2)O (V), with 3-D frameworks in which the -(CuCN)- chains present in CuCN persist. No reaction occurs, however, with NaX (X = Cl, Br, I) or KCl. The addition compounds, I-V, reconvert to CuCN when washed. Both low- and high-temperature polymorphs of CuCN (LT- and HT-CuCN) are produced, except in the case of Cs[Cu(3)(CN)(3)Cl] (III), which converts only to LT-CuCN. Heating similar AX-CuCN reaction mixtures under hydrothermal conditions at 453 K for 1 day produces single crystals of I-V suitable for structure determination. Under these more forcing conditions, reactions also occur with NaX (X = Cl, Br, I) and KCl. NaBr and KCl cause some conversion of LT-CuCN into HT-CuCN, while NaCl and NaI, respectively, react to form the mixed-valence Cu(I)/Cu(II) compounds [Cu(II)(OH(2))(4)][Cu(I)(4)(CN)(6)], a known phase, and [Cu(II)(OH(2))(4)][Cu(I)(4)(CN)(4)I(2)] (VI), a 3-D framework, which contains infinite -(CuCN)- chains. After 3 days of heating under hydrothermal conditions, the reaction between KI and CuCN produces [Cu(II)(OH(2))(4)][Cu(I)(2)(CN)I(2)](2) (VII), in which the CuCN chains are broken into single Cu-CN-Cu units, which in turn are linked into chains via iodine atoms and then into layers via long Cu-C and Cu-Cu interactions.     

Synthesis, properties and structures of eight-coordinate zirconium(IV) and hafnium(IV) halide complexes with phosphorus and arsenic ligands

Eight-coordinate [MX(4)(L-L)(2)] (M = Zr or Hf; X = Cl or Br; L-L = o-C(6)H(4)(PMe(2))(2) or o-C(6)H(4)(AsMe(2))(2)) were made by displacement of Me(2)S from [MX(4)(Me(2)S)(2)] by three equivalents of L-L in CH(2)Cl(2) solution, or from MX(4) and L-L in anhydrous thf solution. The [MI(4)(L-L)(2)] were made directly from reaction of MI(4) with the ligand in CH(2)Cl(2) solution. The very moisture-sensitive complexes were characterised by IR, UV/Vis, and (1)H and (31)P NMR spectroscopy and microanalysis. Crystal structures of [ZrCl(4)[o-C(6)H(4)(AsMe(2))(2)](2)], [ZrBr(4)[-C(6)H(4)(PMe(2))(2)](2)], [ZrI(4)[o-C(6)H(4)(AsMe(2))(2)](2)] and [HfI(4)[o-C(6)H(4)(AsMe(2))(2)](2)] all show distorted dodecahedral structures. Surprisingly, unlike the corresponding Ti(iv) systems, only the eight-coordinate complex was found in each system. In contrast, the ligand o-C(6)H(4)(PPh(2))(2) forms only six-coordinate complexes [MX(4)[-C(6)H(4)(PPh(2))(2)]] which were fully characterised spectroscopically and analytically. Surprisingly the tripodal triarsine, MeC(CH(2)AsMe(2))(3), also produces eight-coordinate [MX(4)[MeC(CH(2)AsMe(2))(3)](2)] in which the triarsines bind as bidentates in a distorted dodecahedral structure. There is no evidence for seven-coordination as found in some thioether systems.     

Ring-opening reactions induced by gold(I) of five- and four-coordinate palladium(II) and platinum(II) complexes containing tripodal or linear polyphosphines

The tripodal ligands NP(3)(tris[2-(diphenylphosphino)ethyl]amine) and PP(3)(tris[2-(diphenylphosphino)ethyl]phosphine), form five-coordinate [Pd(NP(3))X]X [X = Cl (1), Br (2)], [M(PP(3))X]X [M = Pd: X = Cl (4), Br (5), I (6); M = Pt, X = Cl (7), Br (8), I (9)] and four-coordinate[Pd(NP(3))I]I (3) complexes containing three fused rings around the metal. The interaction between Au(tdg)X (tdg = thiodiglycol; X = Cl, Br) or AuI and the respective ionic halo complexes 1-9 in a 1:1 stoichiometric ratio occurs via a ring-opening reaction with formation of the heterobimetallic systems PdAu(NP(3))X(3)[X = Cl (11), Br (12), I (13)], [MAu(PP(3))X(2)]X [M = Pd: X = Cl (14), Br (15), I (16); M = Pt: X = Cl (17), Br (18), I (19)]. The cations of complexes 17 and 18 were shown, by X-ray diffraction, to contain a distorted square-planar Pt(II) arrangement (Pt(P(2)P)X) where PP(3) is acting as tridentate chelating ligand and an almost linear PAuX moiety bearing the dangling phosphorus formed in the ring-opening process. PPh(3) coordinates to Au(I) and not to M(II) when added in excess to 14 and 17. Complexes 14-17 and [Pt(P(4))](BPh(4))(2) (10) (P4=linear tetraphosphine) also react with A(I), via chelate ring-openings to give MAu(2)(PP(3))X(4) [M = Pd: X = Cl (20), Br (21), I (22); M = Pt: X = Cl (23)] and [Pt(2)Au(2)(mu-Cl)(2)(mu-P(4))(2)](BPh(4))(4) (24), respectively.     

Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

Formation of double cubanes [Sn(7)(NR)(8)] in the reactions of pyridyl and pyrimidinyl amines with Sn(NMe(2))(2): a synthetic and theoretical study

In contrast to the reactions of Sn(NMe(2))(2) with unfunctionalized primary amines (RNH(2)), which yield the simple imido Sn(II) cubanes [SnNR](4), the reactions of 2-pyridyl or 2-pyrimidinyl amines give the mixed-oxidation-state Sn(II)/Sn(IV) double cubanes [Sn(7)(NR)(8)]. In addition to [Sn(7)[2-N(5-Mepy)](8)] x 2thf (1 x 2thf) (py = pyridine) and [Sn(7)[2-N(pm)](8)] x 0.33thf (2 x 0.33thf) (pm = pyrimidine), which were communicated previously, the syntheses and structures of the new complexes [Sn(7)[2-N(4-Mepm)](8)] x 2thf (3 x 2thf), [Sn(7)[2-N(4,6-Me(2)pm)](8)] x 4thf (4 x 4thf), [Sn(7)[2-N(4-Me-6-MeO-pm)](8)] (5), and [Sn(7)[2-N(4-MeO-6-MeO-pm)](8)] (6) are reported. Model DFT calculations on the reactions of Sn(NMe(2))(2) with 2-pmNH(2) or PhNH(2), producing the cubanes [Sn[2-N(pm)]](4) and [SnNPh](4) (respectively), and the corresponding double cubanes [Sn(7)[2-N(pm)](8)] and [Sn(7)(NPh)(8)], show that the presence of intramolecular Sn...N bonding which spans the cubane halves of the complexes is crucial to the formation of the double-cubane structure.     

Isopolyoxometalates derived from arylstibonic acids with "reverse-Keggin ion" structures based on [M(RSb)(12)O(28)] cores, M = Co(ii) or Zn(ii)

The preparations and structures are described of four new polyoxostibonates, [Co(p-MeC(6)H(4)Sb)(12)O(28){Co(H(2)O)(3)}(4)]Cl(2)·6H(2)O, [Co(p-ClC(6)H(4)Sb)(12)O(28){Co(H(2)O)(3)}(4)]Cl(2)·22H(2)O, (PhCH(2)NMe(3))(2)[Zn(p-ClC(6)H(4)Sb)(12)O(28)Zn(4)Cl(2.54)Br(1.46)]·8MeCN·H(2)O and [BaCoH(4)(p-MeC(6)H(4)Sb)O(28)]·5H(2)O. Each of these has a framework of 12 (RSb) groups linked by 28 O atoms, with one transition metal ion in a tetrahedral site in the centre. Other metal ions are coordinated to the polyhedral faces. Three of the complexes have the ε Keggin ion geometry, while the fourth is a δ isomer.     

Synthesis and characterization of a new family of square-planar nickel(II) carbonyl derivatives

The reaction of [NBu(4)](2)[Ni(C(6)F(5))(4)] (1) with solutions of dry HCl(g) in Et(2)O results in the protonolysis of two Nibond;C(6)F(5) bonds giving [NBu(4)](2)[[Ni(C(6)F(5))(2)](2)(mu-Cl)(2)] (2 a) together with the stoichiometrically required amount of C(6)F(5)H. Compound 2 a reacts with AgClO(4) in THF to give cis-[Ni(C(6)F(5))(2)(thf)(2)] (3). Reacting 3 with phosphonium halides, [PPh(3)Me]X, gives dinuclear compounds [PPh(3)Me](2)[[Ni(C(6)F(5))(2)](2)(mu-X)(2)] (X=Br (2 b) or I (2 c)). Solutions of compounds 2 in CH(2)Cl(2) at 0 degrees C do not react with excess CNtBu, but do react with CO (1 atm) to split the bridges and form a series of terminal Ni(II) carbonyl derivatives with general formula Qcis-[Ni(C(6)F(5))(2)X(CO)] (4). The nu(CO) stretching frequencies of 4 in CH(2)Cl(2) solution decrease in the order Cl (2090 cm(-1))>Br (2084 cm(-1))>I (2073 cm(-1)). Compounds 4 revert to the parent dinuclear species 2 on increasing the temperature or under reduced CO pressure. [NBu(4)]cis-[Ni(C(6)F(5))(2)Cl(CO)] (4 a) reacts with AgC(6)F(5) to give [NBu(4)][Ni(C(6)F(5))(3)(CO)] (5, nu(CO)(CH(2)Cl(2))=2070 cm(-1)). Compound 5 is also quantitatively formed ((19)F NMR spectroscopy) by 1:1 reaction of 1 with HCl(Et(2)O) in CO atmosphere. Complex 3 reacts with CO at -78 degrees C to give cis-[Ni(C(6)F(5))(2)(CO)(2)] (6, nu(CO)(CH(2)Cl(2))=2156, 2130 cm(-1)), which easily decomposes by reductive elimination of C(6)F(5)bond;C(6)F(5). Compounds 3 and 6 both react with CNtBu to give trans-[Ni(C(6)F(5))(2)(CNtBu)(2)] (7). The solid-state structures of compounds 3, 4 b, 6, and 7 have been established by X-ray diffraction methods. Complexes 4-6 are rare examples of square-planar Ni(II) carbonyl derivatives.     

Synthesis and structural studies of germyl and germyl/stannyl substituted tungstenocenes

One-pot reactions of [WCp2(H)2] and [WCp2(H)(SnMe3)] with "BuLi followed by an equivalent of GeMe2Cl2 afford mono(germyl) substituted tungstenocenes [WCp2(H)(GeMe2Cl)] (1) and [WCp2(SnMe3)(GeMe2Cl)] (7). Reactions of the products with tin halides in the presence NEt3 afford the mixed complexes [WCp2(SnR2X)(GeMe2Y)] (X, Y = Cl, Br, R = Me, Et), which were further converted to moderately stable compounds [WCp2(SnR2H)(GeMe2H)] (R = Me (10), Et (11)). A number of asymmetric mono(halo)-substituted germyl/stannyl tungstenocenes [WCp2(SnMe2X)(GeMe2H)] (X = Cl (12), Br (13)) and [WCp2(SnEt2Y)(GeMe2H)] (Y = Br (14), I (15)) were prepared by selective halogenation of the Sn-H bond in 10 and 11. X-Ray studies of [WCp2(H)(GeMe2Cl)] (1), [WCp2(SnEt2Br)(GeMe2Cl)] (4), and [WCp2(SnEt2Br)(GeMe2H)] (14) established classical structures of these compounds. X-Ray study of complex [WCp2(SnMeCl)(GeMe2Cl)] (3) revealed the presence of interligand Ge-Cl...Sn-Cl interactions in a highly Ge/Sn disordered structure. Analyses of molecular parameters of 1, 4, and 14 suggest the presence of a negative hyperconjugation between metal lone pairs and the sigma*-orbital of the E-X bond, which is stronger in bromo substituted complexes in comparison with chloro substituted ones.     

Photophysical properties of Kuratowski-type coordination compounds [M(II)Zn4Cl4(Me2bta)6] (M(II) = Zn or Ru) featuring long-lived excited electronic states

The syntheses of Kuratowski-type pentanuclear clusters featuring {MZn(4)Cl(4)} cores (M(II) = Ru or Zn) that incorporate triazolate ligands are described. The coordination compounds are characterized by single-crystal X-ray diffraction, X-ray powder diffraction (XRD), FTIR- and UV-vis spectroscopy. [Ru(II)Zn(4)Cl(4)(Me(2)bta)(6)]·2DMF (Me(2)bta(-) = 5,6-dimethyl-1,2,3-benzotriazolate) (1) crystallizes in the cubic system, while [Zn(5)Cl(4)(ta)(6)] (ta(-) = 1,2,3-triazolate) (3) crystallizes in the tetragonal system. Both compounds feature structurally similar cluster topologies in which the central octahedrally coordinated metal ion is coordinated to six triazolate ligands. Each triazolate ligand is coordinated with two zinc ions (μ(3)-bridging mode), leading altogether to a pentanuclear cluster of T(d) point group symmetry. Photophysical investigations reveal that compound [Zn(5)Cl(4)(Me(2)bta)(6)]·2DMF (2) shows a short-lived excited electronic state, which can be populated with high quantum yield. The isostructural compound [Ru(II)Zn(4)Cl(4)(Me(2)bta)(6)]·2DMF (1), on the other hand, shows a long-lived photoexcited state, owing to an internal singlet to triplet conversion of the electronic states, as revealed by time-resolved fluorescence spectroscopy. Insights gained from these studies open up novel design strategies towards photocatalytically active metal-organic frameworks incorporating photoactive Kuratowski-type secondary building units such as MFU-4 (Metal-Organic Framework Ulm University-4).     

New molecular assemblies of redox isomers, [CrIII(X4SQ)3-n(X4Cat)n]-n (X = Cl and Br; n = 0, 1, and 2), with metallocenium cations, [MIIICp2]+ (M = Co and Fe): X-ray crystal structures and physical properties

A series of redox isomers of [CrIII(X4SQ)(X4Cat)2]2-, [CrIII(X4SQ)2(X4Cat)]-, and [CrIII(X4SQ)3]0 (X = Cl and Br, SQ = semiquinonate, and Cat = catecholate) have been synthesized and characterized as charge-transfer (CT) compounds with metallocenium cations: (CoIIICp2)2[CrIII(Cl4SQ)(Cl4Cat)2] (1), (CoIIICp2)2[CrIII(Br4SQ)(Br4Cat)2] (2), (FeIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)].C6H6 (4), (FeIIICp2)[CrIII(Br4SQ)2(Br4Cat)].CS2 (5), and (FeIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)][CrIII(Cl4SQ)3] (6). First, the oxidation states of the chromium complexes are strongly dependent on the redox potentials of the metallocenes used. The CoIICp2, exhibiting stronger reduction power than FeIICp2, is useful for two-electron reduction of the [CrIII(X4SQ)3]0, affording [CrIII(X4SQ)(X4Cat)2]2- (1 and 2), which are first isolated and crystallographically characterized in the solid state. In contrast the reaction with FeIICp2 affords only [CrIII(X4SQ)2(X4Cat)]- (4 and 5). Second, solvents influence crystal structures of these compounds. The solvent set of C6H6/CS2 gives 1:1:C6H6 compound 4 with unique charged anions, [CrIII(Cl4SQ)2(Cl4Cat)]-, while the other set, n-C6H12/CS2, affords 1:2 compound 6 including the two redox isomers, [CrIII(Cl4SQ)2(Cl4Cat)]- and [CrIII(Cl4SQ)3]0. The [CrIII(X4SQ)(X4Cat)2]2- anions in 1 and 2 show no significant interconnection between them (discrete type), while the [CrIII(X4SQ)2(X4Cat)]- anions in 4-6 show one-dimensional column-type structures with the aid of intermolecular stacking interactions of the ligand moieties. The anions in 4 show additional stacking interaction with the [FeIIICp2]+ to form one-dimensional ...[D][A][S][D][A]... (D = [FeIIICp2]+, A = [CrIII(Cl4SQ)2(Cl4Cat)]-, and S = C6H6) type mixed-stack arrangements similar to that of previously reported (CoIIICp2)[CrIII(Cl4SQ)2(Cl4Cat)].C6H6 (3). Compound 6 forms a two-dimensional sheet structure where the two redox isomers, [CrIII(Cl4SQ)2(Cl4Cat)]- and [CrIII(Cl4SQ)3]0, are included. The sheet is regarded as a mixed-valence molecular assembly. Two types of the anions, [CrIII(X4SQ)(X4Cat)2]2- (1 and 2) and [CrIII(X4SQ)2(X4Cat)]- (4-6), exhibiting an intramolecular mixed-valence state, show intramolecular intervalence CT transition (IVCT) from the Cat to the SQ at near 5800 and 4300 cm-1, respectively, both in the solution and in the solid states. The intermolecular mixed-valence state of 6 was characterized by absorption spectroscopy, electric conductivity, and SQUID magnetometry. Interestingly, this mixed-valence state of the chromium module is dependent on the redox active nature of the coordinated ligands.     

Mechanochemical synthesis in copper(II) halide/pyridine systems: single crystal X-ray diffraction and IR spectroscopic studies

Whereas complexes of divalent metal halides (X = Cl, Br, I) with/from pyridine commonly crystallise as trans-[M(py)(4)X(2)]·2py, M on a site of 222 symmetry in space group Ccca, true for CuCl(2) and CuBr(2) in particular, the copper(II) iodide adduct is of the form [Cu(py)(4)I]I·2py, Cu on a site of mm2 symmetry in space group Cmcm, and five-coordinate (square-pyramidal), the same cationic species also being found in 2[Cu(py)(4)I](I(3))·[(py)(2)Cu(μ-I)(2)Cu(py)(2)] (structurally defined). Bromide or N-thiocyanate may be substituted for the unbound iodide ion in the solvated salt, resulting in complexes which crystallize in space group Ccca, but with both anions and the metal atom disordered. In [Cu(py)(4)(I(3))(2)], a pair of long Cu···I contacts approach a square-planar Cu(py)(4) array. Assignments of the ν(CuN) and ν(CuX) (X = Br, I, SCN) bands in the far-IR spectra are made, the latter with the aid of analogous assignments for [Cu(py)(2)X(2)] (X = Cl, Br), which show a dependence of ν(CuX) on the Cu-X bond length that is very similar to that determined previously for copper(i) halide complexes. The structure of the adventitious complex [(trans-)(H(2)O)(py)(4)CuClCu(py)(4)](I(3))(3)·H(2)O is also recorded, with six- and five-coordinate copper atoms; rational synthesis provides [{Cu(py)(4)}(2)(μ-Cl)](I(3))(3)·H(2)O with one water molecule less. In [{Cu(py)(4)Cl}((∞|∞))](I(3))·3py, square pyramidal [Cu(py)(4)Cl](+) cations, assisted by Cl···Cu interactions, stack to give rise to infinite polymeric strings. Several of these compounds were prepared mechanochemically, illustrating the applicability of this method to syntheses involving redox reactions as well as to complex syntheses involving up to five components. The totality of results demonstrates that the [Cu(II)(py)(4)] entity can be stabilized in an unexpectedly diverse range of mononuclear and multinuclear complexes through the presence of lattice pyridine molecules, the bulky triiodide ion, or a combination of both.     

Synthesis, characterization, and photoresponsive properties of a series of Mo(IV)-Cu(II) complexes

Six Mo(IV)-Cu(II) complexes, [Cu(tpa)](2)[Mo(CN)(8)]·15H(2)O (1, tpa = tris(2-pyridylmethyl)amine), [Cu(tren)](2)[Mo(CN)(8)]·5.25H(2)O (2, tren = tris(2-aminoethyl)amine), [Cu(en)(2)][Cu(0.5)(en)][Cu(0.5)(en)(H(2)O)][Mo(CN)(8)]·4H(2)O (3, en = ethylenediamine), [Cu(bapa)](3)[Mo(CN)(8)](1.5)·12.5H(2)O (4, bapa = bis(3-aminopropyl)amine), [Cu(bapen)](2)[Mo(CN)(8)]·4H(2)O (5, bapen = N,N'-bis(3-aminopropyl)ethylenediamine), and [Cu(pn)(2)][Cu(pn)][Mo(CN)(8)]·3.5H(2)O (6, pn = 1,3-diaminopropane), were synthesized and characterized. Single-crystal X-ray diffraction analyses show that 1-6 have different structures varying from trinuclear clusters (1-2), a one-dimensional belt (3), two-dimensional grids (4-5), to a three-dimensional structure (6). Magnetic and ESR measurements suggest that 1-6 exhibit thermally reversible photoresponsive properties on UV light irradiation through a Mo(IV)-to-Cu(II) charge transfer mechanism. A trinuclear compound [Cu(II)(tpa)](2)[Mo(V)(CN)(8)](ClO(4)) (7) was synthesized as a model of the photoinduced intermediate.     

Reactivity of calix-tetrapyrrole SmII and SmIII complexes with acetylene: isolation of an "N-confused" calix-tetrapyrrole ring

The nature of the substituents present on the calix-tetrapyrrole tetra-anion ligand [[R2C(C4H2N)]4]4- (R = [-(CH2)5-]0.5, Et) determines the type of reactivity of the corresponding SmII compounds with acetylene. With R = [-(CH2)5-]0.5, dehydrogenation occurred to yield the nearly colorless dinuclear diacetylide complex [[[[-(CH2)5-]4-calix-tetrapyrrole]SmIII]2(mu-C2Li4)].THF as the only detectable reaction product. Conversely, with R = Et, acetylene coupling in addition to dehydrogenation resulted in the formation of a dimeric butatrienediyl enolate derivative [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu-OCH=CH2)]]2(mu,eta2,eta'2-HC=C=C=CH)]. Reaction of the trivalent hydride [(Et8-calix-tetrapyrrole)(thf)SmIII[(mu-H)[Li(thf)]]2 or of the terminally bonded methyl derivative [(Et8-calix-tetrapyrrole)(CH3)SmIII[[Li(thf)]2[Li(thf)2](mu3-Cl)]] with acetylene resulted in a mixture of the carbide [[(Et8-calix-tetrapyrrole)SmIII]2(mu-C2Li4)].Et2O with the dimerization product [[(Et8-calix-tetrapyrrole)SmIII[Li[Li(thf)]2(mu3-OCH=CH2)]]2-mu,eta2,eta'2-HC=C=C=CH)]. The same reaction also yielded a third product, a trivalent complex [[(Et8-calix-tetrapyrrole)SmIII[Li(thf)2]]2], in which the macrocycle was isomerized by shifting the ring attachment of one of the four pyrrole rings.     

Investigation of silver salt metathesis: preparation of cationic germanium(II) and Tin(II) complexes,and silver adducts containing unsupported silver-germanium and silver-tin bonds

Syntheses of halide derivatives of germanium(II) and tin(II) aminotroponiminate (ATI) complexes and their silver salt metathesis reactions have been investigated. The treatment of GeCl(2) x (1,4-dioxane), SnCl(2), or SnI(2) with [(n-Pr)(2)ATI]Li in a 1:1 molar ratio affords the corresponding germanium(II) or tin(II) halide complex [(n-Pr)(2)ATI]MX (where [(n-Pr)(2)ATI](-) = N-(n-propyl)-2-(n-propylamino)troponiminate; M = Ge or Sn; X = Cl or I). As usually expected, [(n-Pr)(2)ATI]GeCl and [(n-Pr)(2)ATI]SnCl undergo rapid metathesis with CF(3)SO(3)Ag, leading to trifluoromethanesulfonate salts, [[(n-Pr)(2)ATI]Ge][SO(3)CF(3)] and [[(n-Pr)(2)ATI]Sn][SO(3)CF(3)], and silver chloride. However, when the silver source [HB(3,5-(CF(3))(2)Pz)(3)]Ag(eta(2)-toluene) is used, rather than undergoing metathesis, very stable 1:1 adducts [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Ge(Cl)[(n-Pr)(2)ATI] and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI] are formed (where [HB(3,5-(CF(3))(2)Pz)(3)](-) = hydrotris(3,5-bis(trifluoromethyl)pyrazolyl)borate). The use of the iodide derivative [(n-Pr)(2)ATI]SnI did not change the outcome either. All new compounds have been characterized by multinuclear NMR spectroscopy and X-ray crystallography. The Ag-Ge and Ag-Sn bond distances of [HB(3,5-(CF(3))(2)Pz)(3)]Ag<-- Ge(Cl)[(n-Pr)(2)ATI], [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI], and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(I)[(n-Pr)(2)ATI] are 2.4142(6), 2.5863(6), and 2.5880(10) A, respectively. A convenient route to [(n-Pr)(2)ATI]H is also reported.     

Synthesis and characterization of cobalt(II) complexes with tripodal polypyridine ligand bearing pivalamide groups. Selective formation of six- and seven-coordinate cobalt(II) complexes

The reactions of CoX(2) (X = Cl(-), Br(-), I(-) and ClO(4)(-)) with the tripodal polypyridine N(4)O(2)-type ligand bearing pivalamide groups, bis(6-(pivalamide-2-pyridyl)methyl)(2-pyridylmethyl)amine ligand (H(2)BPPA), afforded two types of Co(II) complexes as follows. One type is purple-coloured Co(II) complexes, [CoCl(2)(H(2)BPPA)] (1(Cl)) and [CoBr(2)(H(2)BPPA)] (1(Br)) which were prepared when X = Cl(-) and Br(-), respectively. The other type is pale pink-coloured Co(II) complexes, [Co(MeOH)(H(2)BPPA)](ClO(4)(-))(2) (2·(ClO(4)(-))(2)) and [Co(MeCN)(H(2)BPPA)](I(-))(2) (2·(I(-))(2)), which were obtained when X = I(-) and ClO(4)(-), respectively. From the reaction of 1(Cl) and NaN(3), a purple-coloured complex, [Co(N(3))(2)(H(2)BPPA)] (1(azide)), was obtained. These Co(II) complexes were characterized by X-ray structural analysis, IR and reflectance spectroscopies, and magnetic susceptibility measurements. All these Co(II) complexes were shown to be in a d(7) high-spin state based on magnetic susceptibility measurements. The former Co(II) complexes revealed a six-coordinate octahedron with one amine nitrogen, three pyridyl nitrogens, and two counter anions, and one coordinated anion, Cl(-), Br(-) and N(3)(-), forming intramolecular hydrogen bonds with two pivalamide N-H groups. On the other hand, the latter Co(II) complexes showed a seven-coordinate face-capped octahedron with one amine nitrogen, three pyridyl nitrogens, two pivalamide carbonyl oxygens and MeCN or MeOH. In these structures, intramolecular hydrogen bonding interaction was not observed, and the metal ion was coordinated by the pivalamide carbonyl oxygens and solvent molecule instead of the counter anions. The difference in coordination geometries might be attributable to the coordination ability and ionic radii of the counteranions; smaller strongly binding anions such as Cl(-), Br(-) and N(3)(-) gave the former complexes, whereas bulky weakly binding anions such as I(-) and ClO(4)(-) afforded the latter ones. In order to demonstrate this hypothesis, the small stronger coordinating ligand, azide, was added to complexes 2·(ClO(4)(-))(2) to obtain the dinuclear cobalt(II) complex in which two six-coordinate octahedral cobalt(II) species were bridged with azide, 3·(ClO(4)(-)). Also, the abstraction reaction of halogen anions from complexes 1(Cl) by AgSbF(6) gave a pale pink Co(II) complex assignable to 2·(SbF(6)(-))(2).