Unexpected direct reduction mechanism for hydrogenation of ketones catalyzed by iron PNP pincer complexes

The hydrogenation of ketones catalyzed by 2,6-bis(diisopropylphosphinomethyl)pyridine (PNP)-ligated iron pincer complexes was studied using the range-separated and dispersion-corrected ωB97X-D functional in conjunction with the all-electron 6-31++G(d,p) basis set. A validated structural model in which the experimental isopropyl groups were replaced with methyl groups was employed for the computational study. Using this simplified model, the calculated total free energy barrier of a previously postulated mechanism with the insertion of ketone into the Fe-H bond is far too high to account for the observed catalytic reaction. Calculation results reveal that the solvent alcohol is not only a stabilizer of the dearomatized intermediate but also more importantly an assistant catalyst for the formation of trans-(PNP)Fe(H)(2)(CO), the actual catalyst for hydrogenation of ketones. A direct reduction mechanism, which features the solvent-assisted formation of a trans dihydride complex trans-(PNP)Fe(H)(2)(CO), direct transfer of hydride to acetophenone from trans-(PNP)Fe(H)(2)(CO) for the formation of a hydrido alkoxo complex, and direct H(2) cleavage by hydrido alkoxo without the participation of the pincer ligand for the regeneration of trans-(PNP)Fe(H)(2)(CO), was predicted.     

Rhodium(III) NCN pincer complexes catalyzed transfer hydrogenation of ketones

Air-stable monomeric rhodium(III) NCN pincer complexes were synthesized via direct C-H bond activation of 1,3-bis(2-pyridyloxy)benzene, 3,5-bis(2-pyridyloxy)toluene and 3,5-bis(2-pyridyloxy)anisole with RhCl₃·3H₂O in ethanol under reflux. The synthesized complexes were characterized by elemental analysis and ¹H NMR. One of the complexes was structurally characterized by X-ray analysis. An investigation into the catalytic activity of the complex 1a as catalyst for transfer hydrogenation of ketones to alcohols at 82 °C in the presence of iPrOH/KOH was undertaken with the conversions up to 99%.     

Transfer hydrogenation of ketones catalyzed by nickel complexes bearing an NHC [CNN] pincer ligand

Four NHC [CNN] pincer nickel (II) complexes, [^iPrCNN (CH₂)₄‐Ni‐Br] ( 5a ), [^nBuCNN (CH₂)₄‐Ni‐Br] ( 5b ), [^iPrCNN (Me)₂‐Ni‐Br] ( 6a ) and [^nBuCNN (Me)₂‐Ni‐Br] ( 6b ), bearing unsymmetrical [C (carbene)N (amino)N (amine)] ligands were synthesized by the reactions of [CNN] pincer ligand precursors 4 with Ni (DME)Cl₂ in the presence of Et₃N. Complexes 5a and 5b are new and were completely characterized. The transfer hydrogenation of ketones catalyzed by the four pincer nickel complexes were explored. Complexes 5a and 6a have better catalytic activity than 5b and 6b . With a combination of NaO^tBu/ⁱPrOH/80 °C and 2% catalyst loading of 5a , 77–98% yields of aromatic alcohols could be obtained.     

Transfer hydrogenation of ketones catalyzed by ruthenium complexes

Oxidation of 1,3,5- and 1,2,4-trimethylbenzenes using heteropoly vanadomolybdate as catalyst in the presence of hydrogen peroxide under homogeneous conditions has been investigated. Phenol formation in the case of 1,2,4-trimethylbenzene and only side chain oxidation in the case 1,3,5-trimethylbenzene were observed. This behavior is explained in terms of the charge densities on different centers of both substrate molecules calculated by the MNDO method.     

Asymmetric hydrogenation of tryptophan precursors catalyzed by rhodium-DIOP complexes

Z-2-benzamido(acetamido)-3-(3-indolyl)-2-propenoic acids were hydrogenated with neutral and cationic rhodium(I) complexes containing the chiral diphosphine (–) or (+)–2,3-isopropylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)-butane [(–) or (+)–DIOP].

---

Z-2- ()-3-(3-)-2- () (I), (–) (+)-2,3--2,3--1,4- ()-.

     

Low-pressure hydrogenation of carbon dioxide catalyzed by an iron pincer complex exhibiting noble metal activity

A highly active iron catalyst for the hydrogenation of carbon dioxide and bicarbonates works under remarkably low pressures and achieves activities similar to some of the best noble metal catalysts. A mechanism is proposed involving the direct attack of an iron trans-dihydride on carbon dioxide, followed by ligand exchange and dihydrogen coordination.     

Asymmetric hydrosilylation,transfer hydrogenation and hydrogenation of ketones catalyzed by iridium complexes

Iridium-based asymmetric reduction of ketones to chiral enantiomerically enriched alcohols has recently attracted attention by a number of research groups and interest in this area is growing. This review presents the different catalytic systems based on iridium complexes that have been used in asymmetric hydrosilylation, in asymmetric transfer hydrogenation (ATH) with alcohols or formic acid derivatives as reducing agents, and in asymmetric hydrogenation (H₂ as reducing agent). A large variety of chiral ligands of various denticities and bearing various combination of coordinating atoms (N, P, S, O, C, …) have been used and will be presented. The last part critically reviews the mechanistic understanding of all the above transformations with specific reference to iridium catalysts.     

Cross-coupling of aryltrimethylammonium iodides with arylzinc reagents catalyzed by amido pincer nickel complexes

The cross-coupling reaction of aryltrimethylammonium iodides with aryl- or heteroarylzinc chlorides catalyzed by amido pincer nickel complexes was performed. The reaction requires low catalyst loading and displays broad substrate scope.     

Highly enantioselective hydrogenation of enol acetates catalyzed by Ru-TunaPhos complexes

[reaction: see text] The chiral disphosphines with tunable dihedral angles (TunaPhos) have been used for asymmetric hydrogenation of enol acetates and dihedral-angle-dependent enantioselectivities were observed. C2-TunaPhos has been proved to be effective for Ru-catalyzed asymmetric hydrogenation of electron-deficient and other enol acetates.     

Mechanistic investigations of imine hydrogenation catalyzed by cationic iridium complexes

Complexes [IrH2(eta6-C6H6)(PiPr3)]BF4 (1) and [IrH2(NCMe)3(PiPr3)]BF4 (2) are catalyst precursors for homogeneous hydrogenation of N-benzylideneaniline under mild conditions. Precursor 1 generates the resting state [IrH2{eta5-(C6H5)NHCH2Ph}(PiPr3)]BF4 (3), while 2 gives rise to a mixture of [IrH{PhN=CH(C6H4)-kappaN,C}(NCMe)2(PiPr3)]BF4 (4) and [IrH{PhN=CH(C6H4)-kappaN,C}(NCMe)(NH2Ph)(PiPr3)]BF4 (5), in which the aniline ligand is derived from hydrolysis of the imine. The less hindered benzophenone imine forms the catalytically inactive, doubly cyclometalated compound [Ir{HN=CPh(C6H4)-kappaN,C}2(NH2CHPh2)(PiPr3)]BF4 (6). Hydrogenations with precursor 1 are fast and their reaction profiles are strongly dependent on solvent, concentrations, and temperature. Significant induction periods, minimized by addition of the amine hydrogenation product, are commonly observed. The catalytic rate law (THF) is rate = k[1][PhN=CHPh]p(H2). The results of selected stoichiometric reactions of potential catalytic intermediates exclude participation of the cyclometalated compounds [IrH{PhN=CH(C6H4)-kappaN,C}(S)2(PiPr3)]BF4 [S = acetonitrile (4), [D6]acetone (7), [D4]methanol (8)] in catalysis. Reactions between resting state 3 and D2 reveal a selective sequence of deuterium incorporation into the complex which is accelerated by the amine product. Hydrogen bonding among the components of the catalytic reaction was examined by MP2 calculations on model compounds. The calculations allow formulation of an ionic, outer-sphere, bifunctional hydrogenation mechanism comprising 1) amine-assisted oxidative addition of H2 to 3, the result of which is equivalent to heterolytic splitting of dihydrogen, 2) replacement of a hydrogen-bonded amine by imine, and 3) simultaneous H delta+/H delta- transfer to the imine substrate from the NH moiety of an arene-coordinated amine ligand and the metal, respectively.     

Asymmetric transfer hydrogenation of ketones catalyzed by chiral phosphineiridium complexes

The complexes formed in situ from Ir(COD)acac and chiral menthylphenylphosphines proved to be active catalysts in the hydrogen transfer reaction from isopropanol to prochiral ketones. When acetophenone was used, optical yields of up to 42% were achieved, the configuration of the carbinols being dependent on the bulkiness of the phosphine employed. Concerning the reaction rate, the activation process and the P/Ir ratio, the two menthyl-substituted phenylphosphines display different behaviour.     

Mechanistic investigations of imine hydrogenation catalyzed by dinuclear iridium complexes

Treatment of [Ir2(mu-H)(mu-Pz)2H3(NCMe)(PiPr3)2] (1) with one equivalent of HBF4 or [PhNH=CHPh]BF4 affords efficient catalysts for the homogeneous hydrogenation of N-benzylideneaniline. The reaction of 1 with HBF4 leads to the trihydride-dihydrogen complex [Ir2(mu-H)(mu-Pz)2H2(eta2-H2)(NCMe)(PiPr3)2]BF4 (2), which has been characterized by NMR spectroscopy and DFT calculations on a model complex. Complex 2 reacts with imines such as tBuN=CHPh or PhN=CHPh to afford amine complexes [Ir2(mu-H)(mu-Pz)2H2(NCMe){L}(PiPr3)2]BF4 (L = NH(tBu)CH2Ph, 3; NH(Ph)CH2Ph, 4) through a sequence of proton- and hydride-transfer steps. Dihydrogen partially displaces the amine ligand of 4 to form 2; this complements a possible catalytic cycle for the N-benzylideneaniline hydrogenation in which the amine-by-dihydrogen substitution is the turnover-determining step. The rates of ligand substitution in 4 and its analogues with labile ligands other than amine are dependent upon the nature of the leaving ligand and independent on the incoming ligand concentration, in agreement with dissociative substitutions. Water complex [Ir2(mu-H)(mu-Pz)2H2(NCMe)(OH2)(PiPr3)2]BF4 (7) hydrolyzes N-benzylideneaniline, which eventually affords the poor hydrogenation catalyst [Ir2(mu-H)(mu-Pz)2H2(NCMe)(NH2Ph)(PiPr3)2]BF4 (11). The rate law for the catalytic hydrogenation in 1,2-dichloroethane with complex [Ir2(mu-H)(mu-Pz)2H2(OSO2CF3)(NCMe)(PiPr3)2] (8) as catalyst precursor is rate = k[8]{p(H2)}; this is in agreement with the catalytic cycle deduced from the stochiometric experiments. The hydrogenation reaction takes place at a single iridium center of the dinuclear catalyst, although ligand modifications at the neighboring iridium center provoke changes in the hydrogenation rate. Even though this catalyst system is also capable of effectively hydrogenating alkenes, N-benzylideneaniline can be selectively hydrogenated in the presence of simple alkenes.     

Enantioselective hydrogenation of functionalized olefins catalyzed by Rh-chiral bidentatephosphite complexes

A novel catalytic system for the hydrogenation of dimethyl itaconate has been developed by using rhodium–diphosphite complexes. These chiral diphosphite ligands were derived from glucopyranoside, d-mannitol derivatives, and binaphthyl or H₈-binaphthyl phosphochloridites. The ligands based on the methyl 3,6-anhydro-α-d-glucopyranoside backbone and (R)- and (S)-binaphthol and/or (R)- and (S)-2,2′-dihydroxy-5,5′,6,6′,7,7′,8,8′-octahydro-1,1′-binaphthol gave almost complete conversion of the dimethyl itaconate and both enantiomers of dimethyl 2-methylsuccinate with excellent enantioselectivities. The stereochemically matched combination of methyl 3,6-anhydro-α-d-glucopyranoside and H₈-(S)-binaphthyl in ligand 2,4-bis{[(S)-1,1′-H₈-binaphthyl-2,2′-diyl]-phosphite} methyl 3,6-anhydro-α-d-glucopyranoside was essential to afford dimethyl 2-methylsuccinate with up to 98% ee. The sense of the enantioselectivity of products was predominantly determined by the configuration of the biaryl moieties of the ligands. An initial screening of [Rh(cod)₂]BF₄ with these ligands in the hydrogenation of (E)-2-(3-butoxy-4-methoxybenzylidene)-3-methylbutanoic acid was carried out. Good enantioselectivity (75% ee) and low yield for (R)-2-(3-butoxy-4-methoxybenzyl)-3-methylbutanoic acid were obtained.     

功能化MCM-41固载的钌基催化剂上二氧化碳加氢合成甲酸

采用两种方法制备了功能化MCM-41固载的钌基催化剂,并用原子吸收光谱,紫外可见光谱以及红外光谱等手段对其进行表征。结果表明,钌基在功能化MCM-41上顺利固载。将这两种固载的钌基催化剂用于二氧化碳加氢合成甲酸反应,发现在较低反应温度和较低氢分压下,固载的RuCl2(PPh3)3催化剂表现出更高的催化活性,在反应温度80℃,H2分压5MPa, CO2分压8MPa下,甲酸转化数达到1275。固载的RuCl2(PPh3)3催化剂也表现出很好的重复再用性。     

Enantioselective hydrogenation of indoles derivatives catalyzed by Walphos/rhodium complexes

The enantioselective hydrogenation of indole esters has been carried out efficiently in the presence of a rhodium catalyst modified by Walphos-type chiral ligands. The addition of a base can be beneficial in some catalytic conditions.     

Asymmetric hydrogenation of quinolines catalyzed by iridium complexes of BINOL-derived diphosphonites

A chiral diphosphonite, derived from BINOL and with an achiral diphenyl ether backbone, is an excellent ligand for the Ir-catalyzed asymmetric hydrogenation of quinolines; achiral P-ligands serving as possible additives (ee = 73-96%).     

Efficient cross-coupling of aryl chlorides with arylzinc reagents catalyzed by amido pincer complexes of nickel

The nickel-catalyzed Negishi cross-coupling reaction of aryl chlorides with arylzinc compounds was investigated. The nickel complexes with the amido pincer type of ligands exhibited high catalytic activity and good functional group tolerance.