High-Flux Carbon Molecular Sieve Membranes for Gas Separation

Carbon membranes have great potential for highly selective and cost-efficient gas separation. Carbon is chemically stable and it is relative cheap. The controlled carbonization of a polymer coating on a porous ceramic support provides a 3D carbon material with molecular sieving permeation performance. The carbonization of the polymer blend gives turbostratic carbon domains of randomly stacked together sp² hybridized carbon sheets as well as sp³ hybridized amorphous carbon. In the evaluation of the carbon molecular sieve membrane, hydrogen could be separated from propane with a selectivity of 10 000 with a hydrogen permeance of 5 m³(STP)/(m²hbar). Furthermore, by a post-synthesis oxidative treatment, the permeation fluxes are increased by widening the pores, and the molecular sieve carbon membrane is transformed from a molecular sieve carbon into a selective surface flow carbon membrane with adsorption controlled performance and becomes selective for carbon dioxide.     

Photodegradation of Polychlorinated Dibenzo-p-dioxins in Liquid Samples by Near UV Light Irradiation

Photodegradation of 1,2,3,4-tetrachlorodibenzo-p-dioxin (1,2,3,4-TCDD) in hexane solution was studied under controlled near-UV light exposure in the spectral region from 325 to 269 nm. GC-MS was used to detect the amount of unreacted dioxin and to characterize the relevant degradation products. Irradiation experiments carried out at a constant light energy (700 mJ) showed that the percentage of 1,2,3,4-TCDD left in the solution after irradiation changed from about 55 to 75%, with a minimum of 55% at 310 nm. Further irradiation experiments carried out at two wavelengths, namely 310 and 269 nm, and light energy ranging from 0 to 4000 mJ, showed that the photodegradation reaction of the TCDD always followed a pseudo-first-order kinetic, with a rate constant of 8 × 10⁻⁴and 5 × 10⁻⁴mJ⁻¹, respectively. These experiments also showed that trichloro- and dichloro-dibenzo-p-dioxins were produced with less than 15% of the initial quantity of TCDD, leading to the conclusion that the dechlorination process is a minor photolysis pathway.     

高透量 PdAu/陶瓷复合膜的表征与性能评测

 采用化学镀方法在非对称氧化铝管状载体上制备出高性能 PdAu 合金膜. 采用阶段性热处理方法通过 X 射线衍射技术监测 PdAu 膜层合金化进程, 发现在 823 K 下 H2 气氛中厚度为 2 μm, Au 含量为 17.37% 的 PdAu 双金属膜层需要 200 h 达到完全合金化; N2/H2 气氛对 PdAu 合金化速率无显著影响, 但 N2 气氛中合金化后的 PdAu 合金膜表面粒子烧结更为严重. 在 623~823 K 下, 与未进行化学镀 Au 时的纯 Pd 膜相比, PdAu 合金膜的 H2 渗透速率平均增加 1.68 倍, 透氢活化能 (Ea) 降低 38.51%; 当温度低于 573 K 时, PdAu 合金膜的 Ea 由高温时的 8.83 kJ/mol 增加到 15.75 kJ/mol, 此时 PdAu 合金膜的 H2 渗透控速步骤由体相扩散为主的 H2 传质步骤过渡到由表面扩散为主的传质步骤. 通过扫描电镜和能谱联用仪对 PdAu 合金膜的膜厚度和截面组成进行了表征. 关键词     

微波辅助合成法制备万古霉素开管毛细管电色谱柱

采用微波辅助合成技术,快速制备了万古霉素开管毛细管电色谱柱.以D,L-色氨酸为目标物质,优化了万古霉素键合时的微波条件.结果表明:在微波时间45 min,微波功率300 w,微波温度60℃的条件下制得的电色谱柱分离效果最佳.利用在最佳条件下制备的电色谱柱成功分离了4种手性对映体.在pH 4.0～7.0的范围内考察了空管...     

One-Step Synthesis of Silicon Oxynitride Films Using a Steady-State and High-Flux Helicon-Wave Excited Nitrogen Plasma

A steady-state and high-flux helicon-wave excited N₂ plasma was used to oxynitride Si substrates for the synthesis of silicon oxynitride (SiON) films. X-ray and ultraviolet photoelectron spectroscopy (XPS and UPS) have been extensively used to characterize surface quality of the SiON films, and it is found that a large amount of nitrogen (N) can be incorporated into the films. The result of XPS depth profiles shows that the N concentration is high near the surface and the oxide/Si interface. In the UPS spectra, absence of the reappearance of surface states suggests a resistance to clustering of the oxynitride layer. The N₂ flux and Ar mixture quantity can facilitate tuning of the dissociation characteristics in N₂ discharge. By modulating the N₂ fractions, the N⁺ density reaches maximum at a N₂/(N₂ + Ar) flow-rate ratio of 0.5, resulting in incorporation of more N atoms into the SiON films. Considering the easy control of N₂ plasma, our work opens up a new avenue for achieving high-yield SiON films at low temperature.     

双阳离子体系高通量丝光沸石膜的合成及其乙酸脱水应用

采用多种表征技术详细研究了碱金属阳离子对丝光沸石分子筛膜生长和渗透汽化性能的影响.结果表明,Li+、Na+、K+和Cs+以及Na+-Li+、Na+-K+和Na+-Cs+的不同离子组合对丝光沸石分子筛膜的形貌和性能有很大影响.研究发现,碱金属阳离子通过促进硅在初始凝胶中的溶解,在硅铝酸盐的重排过程中起到结构导向作用,进而...     

Irradiation of ultrahigh-molecular-weight polyethylene

An ultrahigh-molecular-weight polyethylene material covering a range of crystallinity from 42 to 79% increased in calorimetric crystallinity as a result of chain scission following ionizing irradiation. Carbonyl was formed by a diffusion-limited reaction of oxygen with long-lived free radicals. Trans-vinylene production was linear with radiation dose and was highest for the sample of highest crystallinity but was not sensitive to environment.     

环境试样分析

本文是《分析试验室》的定期评述中‘环境试样分析’的第６篇评论，它评论了从１９９６年１月至１９９７年１２月期间我国环境试样分析的进展，包括综述、大气分析、水分析、废水和沉积物分析、生物样品分析和有机污染物分析，引用了参考文献６２０篇。     

环境试样分析

本文是“分析试验室”定期评述中“环境试样分析”专题的第四篇评述。它叙述了１９９２年１月至１９９３年１２月期间我国有关环境试样分析的研究工作进展。内容包括概述、大气分析、水分析、沉积物分析、生物样品分析及有机物测定。共引用文献６７４篇。     

环境试样分析

本文是《分析试验室》的定期评述中“环境试样分析”的第５篇评论。它评论了从１９９４年１月至１９９５年１２月期间我国环境试样分析的进展，包括综述、大气分析、水分析、沉积物分析、生物样品分析和有机污染物分析引用参考文献４９４篇。     

Vacuum Ultraviolet Irradiation of Polymers

The interest in incoherent sources for wavelength-selective photochemistry has increased lately, but little is still known about the behavior of polymers when exposed to far UV and vacuum UV (VUV) radiation. The same dearth of information exists regarding UV (VUV) radiation emitted by low-pressure plasmas during polymer treatment. In order to study VUV-UV effects on several polymers (polyethylene - PE, polystyrene - PS, hexatriacontane - HTC, and poly(methyl methacrylate) - PMMA), we have used the well-characterized emissions from hydrogen (broad-band emission) and hydrogen/argon mixture (near-monochromatic radiation) plasmas as light sources. During irradiation, samples were kept under vacuum or in a flow of pure oxygen at low pressure; in both cases the radiation fluxes at the sample position have been precisely determined by careful spectroscopic calibration experiments. We have employed a quartz crystal microbalance (QCM) to measure in-situ any possible mass change of the various polymers. Following irradiation, samples were analysed by ellipsometry (for thickness and refractive index), X-ray photoelectron spectroscopy (XPS, to evaluate the near-surface composition and content of various functional groups), and atomic force microscopy (AFM, for surface topography and roughness measurements).     

Irradiation of cane sugar spirit

The present study deals with the effect of irradiation on the gas-chromatographic profile of irradiated cane sugar spirit irradiated in glass containers in the presence of oak chops with doses of 0–10 kGy. Volatile constituents were analyzed in a CG gas chromatographer with a flame ionization detector using a Megabore CG-745 column. The results are discussed considering the contribution of irradiation to the quality of the spirit and the contribution of the irradiated oak wood.     

Activation Analysis of Large Samples

The usual mass of samples for activation analysis is in the range of several milligrams to several hundred milligrams. An improvement of the detection limit by three orders of magnitude is attainable by use of a larger sample size. Limitations of the method due to thermal effects, neutron self-shielding and gamma-ray attenuation during activation and measuring of large organic samples are discussed.     

Cell Cycle Kinetics Following UVA Irradiation in Comparison to UVB and UVC Irradiation

Abstract— There is limited information about the carcinogenic effect of longwave ultraviolet radiation (UVA: 315-400 nm). In particular very little is known about the relevant genotoxic damage caused by physiological doses of UVA radiation. A general response of cells to DNA damage is a delay or arrest of the cell cycle. Conversely, such cellular responses after UVA irradiation would indicate significant genotoxic damage. The aim of this study is to compare cell cycle kinetics of human fibroblasts after UVC (190-280 nm radiation), UVB (280-315 nm radiation) and UVA irradiation. Changes in the cell cycle kinetics were assessed by bivariate flow cytometric analysis of DNA synthesis and of DNA content. After UVC, UVB or UVA irradiation of human fibroblasts a suppression was seen of bromodeoxyuridine (BrdU) incorporation at all stages of S phase. The magnitude of this suppression appeared dose dependent. Maximum suppression was reached at 5-7 h after UVB exposure and directly after UVA exposure, and normal levels were reached 25 h after UVB and 7 h after UVA exposure. The lowered BrdU uptake corresponded with a lengthening of the S phase. No dramatic changes in percentages of cells in G₁, S and G₂/M were seen after the various UV irradiations. Apparently, UVA irradiation, like UVB and UVC irradiation, can temporarily inhibit DNA synthesis, which is indicative of genotoxic damage.     

超声辐照法合成二氯苯基膦

超声辐照法合成二氯苯基膦;二氯苯基膦（DCPP）;合成;超声;络合剂