Synthesis and thermal study of polyamides and polyaspartimides

Copolymers were synthesized by polyaddition reactions of aromatic diamine (4,4′-sulphonyl dianiline) and aliphatic diamines (1,2-diaminoethane and 1,3-diaminopropane) with N,N′-arylenebismaleimides (N,N′-m-phenylene-N,N′-p-phenylene-, and N,N′-benzidine-). They were characterized by elemental analysis, i.r. spectra and viscosity. The thermal behaviour of copolymers was studied using Thermogravimetric Analysis (TGA). All the copolymers are stable up to 270°. Polyamides are less stable than polyaspartimides.     

Dissociation energy of N-H bonds in diatomic aromatic amines

The dissociation energies of N-H bonds (D, kJ/mol) were calculated by the intersecting parabolas method using the kinetic data for the following aromatic diamines: para-phenylenediamine (359.8), N,N′-dimethyl-para-phenylenediamine (348.9), N-dimethyl-N′-methyl-para-phenylenediamine (342.4), N,N′-diphenyl-para-phenylenediamine (352.8), N,N′-diphenylethylenediamine (372.7), N,N′-diheptylethylenediamine (373.3), N,N′-di-(4,4′-ethoxyphenyl)ethylenediamine (363.3), N,N′-di-(4,4′-diisopropylphenyl)-para-phenylenediamine (344.6), 4-{[dimethyl(4-phenylamino)phenoxy)silyl]oxy}-N-phenylaniline (353.4), N,N′-di-β-naphthyl-para-phenylenediamine (354.6), N,N′-di-β-naphthoxy-para-phenylenediamine (353.7), 1,1′-dinaphthyl-2,2′-bis-N,N′-phenyldiamine (372.9), 1,1′-dinaphthyl-2,2′-bis-N,N′-β-naphthyldiamine (384.2), and 2,6-bis[(1E)-1-(2-phenylhydrazin-1-ylidene)ethyl]pyridine (367.9). Individual dissociation energies for the two N-H bonds were determined in N-phenyl-N′-isopropyl-para-phenylenediamine: D(PhN-H) = 352.5 and D(Me₂CHN-H) = 348.7 kJ/mol.     

Synthesis of N-substituted bisitaconimide monomers for use as thermosetting polyimide resins

Two monomeric N-substituted bisitaconimides, N,N′-bisitaconimido-p,p′-diphenylmethane and N,N′-bis(itaconimido-p,p′-diphenyl ether), were synthesized from the corresponding diamines. The synthesis was accomplished by reaction of the diamine with itaconic anhydride and cyclocondensation of the resultant bisitaconamic acid. Attempts to use p,p′-diaminodiphenylsulfone as the diamine gave N,N′-biscitraconimido-p,p′-diphenylsulfone and N-citraconimido-N′-itaconimido-p,p′-diphenylsulfone instead of the bisitaconimide. The two bisitaconimides polymerize thermally at 180°C and 225°C, respectively, and yield tough polymers with very high thermal stability.     

Forced proximity of nitroxide groups in pincer compounds with a xanthene spacer

We designed bisnitroxide compounds where the radical sites are located close to each other in a molecule. Two new pincer-type bisnitroxide compounds have been synthesized, involving xanthene-4,5-diyl as a spacer and tert-butyl phenyl nitroxides as arms. From the X-ray crystal structure analysis, the shortest intramolecular interatomic N?O and O?O distances respectively are 5.074(6) and 5.258(6) Å for the m,m′-derivative and 3.624(3) and 3.771(3) Å for the p,p′-derivative. The N?O distance in the latter satisfies the empirical criterion for possible dimerization/degradation reaction accompanied by dia-/paramagnetic transition. However, the magnetic study clarified paramagnetic behavior in all the temperature range. According to a singlet-triplet model, antiferromagnetic couplings were characterized with 2J/k_B = ?7.71(2) and ?8.83(4) K for the m,m′ and p,p′-derivatives, respectively. The present result suggests that a more flexible spacer is required for realization of possible dia-/paramagnetic transition.     

The reaction of (Sp)-2-(diphenylphosphino)ferrocenecarboxylic acid with carbodiimide reagents: Characterisation of the acid anhydride and urea products

Interaction of (S_p)-2-(diphenylphosphino)ferrocenecarboxylic acid [(S_p)-1] with N,N′-dicyclohexylcarbodiimide (DCC) and N-ethyl-N′-[3-(dimethylamino)propyl]carbodiimide (EDC) have been investigated in order to study the reacting system itself and to characterise side-products typically arising during the diimide-promoted condensation of acid (S_p)-1 with nucleophiles. The reaction between (S_p)-1 and DCC was found to give preferentially the respective urea derivative in the absence of a base, and (S_p)-2-(diphenylphosphino)ferrocenecarboxylic anhydride [(S_p,S_p)-3] when the same reaction was performed in the presence of 4-(dimethylamino)pyridine (DMAP). With EDC, the preference for a reaction pathway was less pronounced: whereas the reaction without the base afforded exclusively the corresponding urea, that in the presence of DMAP yielded a mixture of the urea and anhydride (S_p,S_p)-3.     

The effect of ammonium polyphosphate on the mechanism of thermal degradation of polyureas

The thermal decomposition of structurally related N–H and N,N′-disubstituted polyureas (Table I) and their mixtures with ammonium polyphosphate (APP) was investigated by thermogravimetry (TG) and direct pyrolysis in a mass spectrometer (MS). The N–H polyureas (IV–VI) undergo a quantitative depolymerization process with the formation of oligomers with amine and isocyanate end groups. In contrast, the thermal degradation of the N,N′-disubstituted polyureas (I–III) proceeds by a different mechanism as a function of their chemical structure. The addition of APP lowers the thermal stability of the N,N′-disubstituted polyureas, whereas that of the N–H polyureas is unaltered. However, our data show that APP does not change the nature of the pyrolytic products. The destabilizing effect of the additive can be attributed to the catalytic action of the acid species formed by its thermal decomposition.     

Allgemeiner Zugang zu Polyaminen mit Ethan-1,2-diamin-Einheiten: Synthese von nicht natürlich vorkommenden homologen und isomeren N1,4-Di(4-cumaroyl)sperminen

█tl="American"█The synthesis of the three N,N′-di(4-coumaroyl)tetramines, i.e., of (E,E)-N-{3-[(2-aminoethyl)amino]propyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1a ), (E,E)-N-{4-[(2-aminoethyl)amino]butyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1b ), and (E,E)-N-{6-[(2-aminoethyl)amino]hexyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1c ), is described. It proceeds through stepwise construction of the symmetric polyamine backbone including protection and deprotection steps of the amino functions. Their behavior on TLC in comparison with that of 1,4-di(4-coumaroyl)spermine (=(E,E)-N-{4-[(3-aminopropyl)amino]butyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(propane-1,3-diyl)bis[prop-2-enamide]; 2 ) is discussed.     

Synthesis,characterization, anticancer activity,thermal and electrochemical studies of some novel uranyl Schiff base complexes

Some tetradentate N₂O₂ Schiff base ligands, such as N,N′-bis(naphtalidene)-1,2-phenylenediamine, N,N′-bis(naphtalidene)-4-methyl-1,2-phenylenediamine, N,N′-bis(naphtalidene)-4-chloro-1,2-phenylenediamine, N,N′-bis(naphtalidene)-4-nitro-1,2-phenylenediamine, N,N′-bis(naphtalidene)-4-carboxyl-1,2-phenylenediamine, and their uranyl complexes were synthesized and characterized by ¹H NMR, IR, UV–Vis spectroscopy, TG (thermogravimetry), and elemental analysis (C.H.N.). Thermogravimetric analysis shows that uranyl complexes have very different thermal stabilities. This method is used also to establish that only one solvent molecule is coordinated to the central uranium ion and this solvent molecule does not coordinate strongly and is removed easier than the tetradentate ligand and also trans oxides. The electrochemical properties of the uranyl complexes were investigated by cyclic voltammetry. Electrochemistry of these complexes showed a quasireversible redox reaction without any successive reactions. Also, the kinetic parameters of thermal decomposition were calculated using Coats–Redfern equation. According to Coats–Redfern plots the kinetics of thermal decomposition of the studied complexes is first-order in all stages. Anticancer activity of the uranyl Schiff base complexes against cancer cell lines (Jurkat) was studied and determined by MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazoliumbromide) assay.     

3-(α-Nitroalkyl- and α-polynitroalkyl-ONN-azoxy)-4-nitraminofurazans and some their derivatives

Methods for the preparation of 3-(α-nitroalkyl- and α-polynitroalkyl-ONN-azoxy)-4-nitraminofurazans with primary and secondary nitramine groups and their derivatives, including N,N′-bis[(3-(α-polynitromethyl-ONN-azoxy)furazan-4-yl]alkylen-N,N′-dinitramines, have been elaborated.     

Design of postmetallocene Schiff base-like catalytic systems for polymerization of olefins: XII. Synthesis of tetradentate bis-salicylaldehyde imine ligands

Reactions of salicylaldehyde, 3-tert-butylsalicylaldehyde, and 3,5-di-tert-butylsalicylaldehyde with 1,4-diaminobutane, 1,6-diaminohexane, 4,4′-diaminodiphenylmethane, 4,4′-diamino-3,3′,5,5′-tetramethyldiphenylmethane, 4,4′-diamino-5,5′-dicyclopentyl-3,3′-dimethyldiphenylmethane, 4,4′-diamino-5,5′-dicyclohexyl-3,3′-dimethyldiphenylmethane, bis(4-aminophenyl) sulfone, o,o′- and p,p′-diaminodiphenyl ethers, 1,4-bis(4-aminophenoxy)benzene, 2,2-bis[4-(4-aminophenoxy)phenyl]propane, and 4,4″-diamino-p-terphenyl gave a series of the corresponding Schiff bases which can be used as tetradentate ligands for the synthesis of titanium and zirconium complexes.     

Preparation and properties of modified bismaleimide resins by novel bismaleimide containing 1,3,4‐oxadiazole

Bismaleimide (BMI) resin is a high‐performance thermosetting polymer, but its inherent brittleness hinder a broader range of application. Therefore, it has aroused wide concern to improve the toughness of BMI resins without scarification of their thermal stability. This paper reported some studies on modified BMI resins based on diallyl bisphenol A, novel BMI monomers, e.g. 2‐[3‐(4‐maleimidophenoxy)phenyl]‐5‐(4‐maleimidophenyl)‐1,3,4‐oxadiazole (m‐Mioxd) or 2‐[4‐(4‐maleimidophenoxy)phenyl]‐5‐(4‐maleimidophenyl)‐1,3,4‐ oxadiazole (p‐Mioxd) in different proportions (0.87:1, 1:1, 1.2:1; mol/mol). The curing mechanism and kinetics of the copolymerized systems were investigated by differential scanning calorimetry and Fourier transform infrared spectroscopy. Thermogravimetric analysis was applied to study the thermal properties of the cured resins, and the results indicated that the modified resins had excellent thermal stability with high residual weight percentage at 700°C (>50%), temperatures for 5% weight loss around 400°C. Besides, N,N′‐4,4′‐bismaleimidodiphenylmethylene and O,O′‐diallyl bisphenol A resin blends were modified by m‐Mioxd and p‐Mioxd, respectively. We investigated the effects of mole concentration of m‐Mioxd or p‐Mioxd on the curing process, mechanical properties, fracture toughness, and heat resistance of the modified resins. The results revealed that the introduction of m‐Mioxd and p‐Mioxd could improve the impact property of the modified BMI resins. When their proportion was 0.07, the impact strength increased 123.8% and 108.3%, respectively. The novel chain‐extended BMIs could reduce the crosslink density of cured resins and improve the brittleness effectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and properties of alkylthiomethylated urea derivatives

Novel N,N′-bis[(alkylsulfanyl)methyl]ureas were prepared by three-component condensation of urea with formaldehyde and thiol in a NaOH solution, and alkylthiomethylated polymethyleneureas were prepared by the condensation of the same reactants in the presence of glacial acetic acid and without it. Polymethyleneureas efficiently sorb silver(I) from nitric acid solutions and palladium(II) from hydrochloric acid solutions. Alcoholsoluble N,N′-bis[(alkylsulfanyl)methyl]ureas inhibit carbon dioxide corrosion of St.3 steel.     

Synthesis of endo,exo-7,8,9,10-tetrachlorobicyclo[4.4.0]deca-7,9-diene-3,4-dicarboxylic acid N,N′-bisimides

A one-stage synthesis was developed of N,N′-(3,3′-dimethoxy-4,4′-diphenylmethane)- and N,N′-(1,2-ethane)-endo,exo-7,8,9,10-tetrachlorobicyclo[4.4.0]deca-7,9-diene-3,4-dicarboxylic acids bisimides by reaction of a bisadduct of 1,8,9,10,11,11-hexachlorotricyclo[6.2.1.0^5,10]-undec-9-ene-4,5-dicarboxylic acid N,N′-R-bisimide with pyridine in DMF. The spatial structure of compounds obtained was established.     

Mn(III) salen complexes-catalyzed enantioselective addition of trimethyl silylcyanide to N-benzylimines in the presence of 4-phenyl pyridine-N-oxide as an additive

Chiral monomeric and dimeric Mn(III) salen complexes viz., [(S,S)-N,N′-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediaminato manganese(III) chloride and 5,5-methylene di-[(S,S)-{N-(3-tert-butyl salicylidine)-N′-(3′,5′-di-tert-butyl salicylidene)}-1,2-cyclohexanediaminato manganese(III) chloride were used as catalysts for the highly enantioselective Strecker reaction of various imines (derived by the condensation of aldehydes and amine) with TMSCN as a source of cyanide in toluene. Excellent yield (95%) of α-amino nitrile with ee >99% was achieved when N-(2-methoxybenzylidine)-1-phenylmethanamine was used as a substrate and 4-phenyl pyridine-N-oxide (4-PPNO) as an additive at ?55 °C in 28 h. The dimeric catalyst was found to be more reactive and enantioselective than the monomeric catalyst. The chiral dimeric catalyst used in the present study was recoverable and recyclable several times with retention of its performance.     

Helix-sense-selective radical polymerization of bulky styrenic monomers: chiral induction and liquid crystallinity

Eight chiral vinylterphenyl monomers,(+)-2,5-bis{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(Ia),(+)-2,5-bis{4′-[(S)-2″-methylbutyloxy]phenyl}styrene(Ib),(+)-2,5-bis{4′-[(S)-3″-methylpentyloxy]phenyl}styrene(Ic),(+)-2,5-bis{4′-[(S)-4″-methylhexyloxy]phenyl}styrene(Id),(?)-2,5-bis{4′-[(R)-1″-methylpropyloxy]phenyl}styrene(Ie),(+)-2-{4′-[(S)-1″-methylpropyloxy]phenyl}-5-{4′-[(R)-1″-methylpropyloxy]phenyl}styrene(IIa),(?)-2-{4′-[(R)-1″-methylpropyloxy]phenyl}-5-{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(IIb),and(+)-2-{4′-[(S)-2′′-methylbutyloxy]phenyl}-5-{4′-[(S)-1″-methylpropyloxy]phenyl}styrene(III),were synthesized and radically polymerized.These molecules were designed to further understand long-range chirality transfer in radical polymerization and to possibly tune the chiroptical properties of the polymers by varying the spatial configuration,position,and various combination of the stereogenic centers at the ends of p-terphenyl pendants.The resultant polymers adopted helical conformations with a predominant screw sense.When the stereogenic centers ran away from the terphenyl group as in Ib?d,the corresponding polymers changed the direction of optical rotation in an alternative way and showed no obvious stereomutation upon annealing in tetrahydrofuran.The two stereogenic centers of IIa,IIb,and III acted concertedly in chiral induction,whereas those of Ia and Ie played a counteractive role.The five polymers derived from Ia,Ie,IIa,IIb,and III underwent stereomutation when annealed in tetrahydrofuran.The polymers PIa?e had good thermal stability and high glass transition temperatures(Tgs).They generated liquid crystalline phases at above Tgs that could be kept upon cooling,with the exception of PIe.This result was consistent with the extended helical structures.     

Mild Oxidation of 1,3,5‐Trisubstituted Pyrazolines with N‐Bromo‐sulphonamides

1,3,5‐Trisubstituted pyrazolines to pyrazoles are carried out efficiently in the presence of new reagents N,N,N′, N′‐tetrabromo‐benzene‐1,3‐disulfonylamine [TBBDA] and N,N′‐dibromo‐N,N′‐1,2‐ethanediylbis‐(p‐toluenesulphonamide) [BNBTS] in solvent‐free conditions with catalytic amounts of SiO₂ under microwave irradiation in high yields.     

2-Nitroguanidine derivatives: XI. Reactions of <Emphasis Type="Italic">N</Emphasis>′-nitrohydrazinecarboximidamide and 2-methylidene-<Emphasis Type="Italic">N</Emphasis>′-nitrohydrazinecarboximidamide with glyoxal

The reaction of glyoxal with N′-nitrohydrazinecarboximidamide (1-amino-2-nitroguanidine) in the presence of sodium hydroxide at a molar ratio of 1 : 1 : 1 gave N′-nitro-2-(2-oxoethylidene)hydrazinecarboximidamide as a mixture of syn and anti isomers, whereas at a reactant ratio of 1:2:2 N′-nitro-2-[(5-nitroamino-2H-1,2,4-triazol-3-yl)methyl]hydrazinecarboximidamide and 3-nitroamino-4,5-dihydro-1,2,4-triazin-5-ol were formed. N′-Nitro-2-(2-oxoethylidene)hydrazinecarboximidamide reacted with N′-nitrohydrazinecarboximidamide in boiling ethanol to give N′-nitro-2-[(5-nitroamino-2H-1,2,4-triazol-3-yl)methyl]hydrazinecarboximidamide, while in glacial acetic acid 2,2′-(ethane-1,2-diylidene)bis(N′-nitrohydrazinecarboximidamide) was obtained. The latter was also formed in the reaction of glyoxal with N′-nitrohydrazinecarboximidamide in acetic acid at room temperature. The reaction of 2-methylidene-N′-nitrohydrazinecarboximidamide with glyoxal led to the formation of 3-nitroimino-2,3,4-5-tetrahydro-1,2,4-triazine-5-carbaldehyde or 1-(methylideneamino)-2-(nitroimino)imidazolidine-4,5-diol, depending on the conditions.     

Organic electroluminescent device with an aromatic amine-containing polymer as a hole transport layer (I): Poly[N-[p-N′ -phenyl-N′-[1,1′-biphenyl-4′-[N″-phenyl-N″-(2-methylphenyl)amino]-4-amino]]phenyl methacrylamide]

Electroluminescent devices were fabricated using a holetransporting polymer, poly[N-[p-N′ -phenyl-N′-[1,1′-biphenyl-4′-[N″-phenyl-N″-(2-methylphenyl)amino]-4-amino]]phenyl methacrylamide] (PTPDMA), and tris(8-quinolinolato)aluminum(III) complex, Alq, as the hole transport layer and the emitter layer, respectively. A device structure of glass substrate/indium–tin–oxide/PTPDMA/Alq/Mg:Ag was employed. Hole injection from the electrode through the PTPDMA layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green luminescence with a luminance of 20,000 cd/m² was obtained at a drive voltage of 14 V.     

Synthesis and characterization of diphenylaminodiphenyl stryl based alternating copolymers

Diphenylaminobiphenylated stryl based alternating copolymers with phenyl or fluorene, which were expected to have a terphenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant and a phenyl/fluorene/phenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant, were synthesized by a Suzuki coupling reaction. The obtained copolymers were confirmed with various types of spectroscopy. The alternating copolymers showed good hole‐injection properties because of their low oxidation potential and good solubility and high thermal stability with a high glass‐transition temperature. The alternating copolymers showed blue emissions because of the adjusted conjugation lengths; the maximum wavelength was 460 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} and 487 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl] vinylene‐alt‐9,9‐dihexylfluorene}. The maximum brightness of indium tin oxide/poly(3,4‐ethylene dioxythiophene)/polymer/LiF/Al devices with poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} or poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐9,9‐dihexylfluorene} as the emitting layer was 250 or 1000 cd/m², respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 341–347, 2007     

Preparation of polyhydrouracils and polyiminoimidazolidinones

Polyhydrouracils and polyiminoimidazolidinones were prepared by ring formation along the chain of appropriately substituted polyureas. Cyclization of 2-carbomethoxy-ethyl-substituted polyureas in a polyphosphoric acid medium gave the polyhydrouracils. The polyurea precursors were prepared from N,N′-bis(2-carbomethoxyethyl)-1,6-hexanediamine and N,N′-di(2-carbomethoxyethyl)-1,4-cyclohexanebis(methylamine) with methylenebis(4-phenyl isocyanate), 2,4-toluene diisocyanate, and 3,3′-dimethoxy-4,4′-biphenylene diisocyanate. These polyureas were soluble in m-cresol, dimethylformamide, and chloroform, had inherent viscosities of up to 0.8, and could be cast into tough films. The polyhydrouracils had similar physical properties and could also be cast into films. The polyhydrouracils melted at temperatures 100–150°C higher than their polyurea precursors. Polyiminoimidazolidinones were prepared by cyclization of α-cyanoalkyl-substituted polyureas in the presence of n-butylamine. The intermediate polyureas, which were not isolated, were prepared from methylenebis(4-phenyl isocyanate) with N,N′-bis(1-cyanocyclohexyl)-1,6-hexanediamine, N,N′-bis(1-cyanocyclohexyl)-m-xylylenediamine and N,N′-bis(1-cyanocyclopentyl)-1,6-hexanediamine. The polyiminoimidazolidinones were soluble in m-cresol, dimethylformamide, and chloroform and had low inherent viscosities of 0.14–0.28. Thermogravimetric analyses showed that the polyhydrouracils underwent rapid decomposition at 400°C, whereas an analogous unsubstituted polyurea decomposed at 300°C. On the other hand, the polyiminoimid-azolidinones showed no greater thermal stability than the unsubstituted polyurea.