Preparation and properties of a new chelating resin containing imidazolyl azo groups

 A new chelating resin incorporating imidazolyl azo groups into a matrix of polystyrene divinylbenzene has been prepared. The exchange capacity of the resin for the ions mercury(II), silver(I) and lead(II) as a function of pH has been determined. The resin exhibits no affinity to alkali, or alkaline earth metals. It is highly selective for only mercury(II) and silver(I). In column operation it has been observed that mercury(II) in trace quantities is very effectively removed from river water spiked with mercury(II) at the usual pH of natural waters. Received: 2 January 1996/Revised: 11 April 1996/Accepted: 16 April 1996     

A new resin containing benzimidazolylazo group and its use in the separation of heavy metals

A new resin incorporating benzimidazolylazo group into a matrix of polystyrene divinylbenzene has been prepared. The exchange capacity of the resin for the ions mercury(II), silver(I) and palladium(II) as a function of pH has been determined. The resin exhibits no affinity for alkali or alkaline earth metals. It is highly selective for Hg(II), Ag(I) and Pd(II). In column operation, it has been observed that Hg(II), Ag(I) and Pd(II) in trace quantities can be selectively separated from geological, medicinal and environmental samples.     

Preparation and analytical properties of a chelating resin containing bicine groups

A polystyrene divinyl benzene based resin containing bicine groups has been prepared and its analytical properties investigated. The pH dependence of sorption of metal on the resin has been determined for Cu(II), Fe(II), Ni(II), Co(II), Zn(II), Hg(II) and Pb(II). The important characteristics of the resin are fast equilibrium, high selectivity and small volume change between its hydrogen and metal forms. These enable it to be applied to the rapid concentration of trace amounts of these metal ions. It shows promise for the separation of lead from other metal ions.     

Ureasulfonamide Polymeric Sorbent for Selective Mercury Extraction

A new polymeric resin with sulfonamide pendant functions has been prepared for the selective extraction of mercuric ions. This polystyrene sulfonamide urea resin with a 3.5 mmol/g total nitrogen content is able to selectively sorb mercury from aqueous solutions. The mercury sorption capacity of the resin is around 1.60 mmol/g under non-buffered conditions. The experiments performed under identical conditions with some metal ions reveal that Cd(II), Pb(II), Zn(II), and Fe(III) ions are also extractable in low quantity (0.05–0.1 mmol/g). The sorbed mercury can be eluted by repeated treatment with hot acetic acid without hydrolysis of the amide groups.     

Synthesis and analytical properties of a chelating resin functionalised with bis-(N,N'-salicylidene)1,3-propanediamine ligands

A polystyrenedivinylbenzene-based macroreticular resin was functionalised with bis-(N,N'-salicylidene)1,3-propanediamine ligands and its analytical properties have been investigated. The pH dependence of metal resin chelation has been determined for Cu(II), Ni(II), Co(II), Zn(II), Fe(II), Mn(II), Pb(II), Cd(II) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin at neutral pH and easily recovered by elution with 1 N hydrochloric acid. The resin exhibits good chemical stability and fast equilibration with the metal ion making it useful for rapid concentration of trace amounts of metal ions on the resin columns.     

Preparation and analytical properties of a chelating resin functionalized with 1-hydrazinophthalazine ligand

A poly[styrene-co-(divinylbenzene)] resin (XAD-4) functionalized with 1-hydrazinophthalazine ligand has been prepared and its analytical properties investigated. The pH dependence of sorption of metal ion on the resin has been determined for Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II), Fe(III) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 mol l(-1) hydrochloric acid. The resin was found to be selective for Fe(III) and its separation from other metal ions was carried out effectively. Metal ions concentrations were determined using AAS.     

Adsorption of Cu(II), Zn(II), Ni(II), Pb(II), and Cd(II) from aqueous solution on Amberlite IR-120 synthetic resin

The adsorption of copper(II), zinc(II), nickel(II), lead(II), and cadmium(II) on Amberlite IR-120 synthetic sulfonated resin has been studied at different pH and temperatures by batch process. The effects of parameters such as amount of resin, resin contact time, pH, and temperature on the ion exchange separation have been investigated. For the determination of the adsorption behavior of the resin, the adsorption isotherms of metal ions have also been studied. The concentrations of metal ions have been measured by batch techniques and with AAS analysis. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Freundlich isotherms. Here we report the method that is applied for the sorption/separation of some toxic metals from their solutions.     

Ureasulfonamide Polymeric Sorbent for Selective Mercury Extraction

Summary. A new polymeric resin with sulfonamide pendant functions has been prepared for the selective extraction of mercuric ions. This polystyrene sulfonamide urea resin with a 3.5 mmol/g total nitrogen content is able to selectively sorb mercury from aqueous solutions. The mercury sorption capacity of the resin is around 1.60 mmol/g under non-buffered conditions. The experiments performed under identical conditions with some metal ions reveal that Cd(II), Pb(II), Zn(II), and Fe(III) ions are also extractable in low quantity (0.05–0.1 mmol/g). The sorbed mercury can be eluted by repeated treatment with hot acetic acid without hydrolysis of the amide groups.     

Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

Determination of Nanomolar Levels of Mercury(II) by Exploiting the Silver Stain Enhancement of the Aggregation of Aptamer-Functionalized Gold Nanoparticles

An ultrasensitive method for the determination of mercury(II) ions was developed based on mercury(II)-induced strong and selective binding of thymine-thymine mismatches between aptamers on gold nanoparticles and a signal amplification effect caused by a silver stain. The gold nanoparticles were first coated with a single-stranded DNA aptamer rich in thymine. In the presence of mercury(II), the functionalized gold nanoparticles aggregated due to the formation of thymine-Hg(II)-thymine complexes resulting in a largely reduced surface area of the gold nanoparticles when exposed to silver ions during staining. Therefore, fewer silver ions were reduced, and the average grey values, as measured by a scanner, were lower. The average grey values were linearly related to the logarithm of mercury(II) concentration from 1 to 500 nM. In addition, there were no significant interferences by common metal ions due to the high specificity of the interaction between mercury(II) and the aptamer. The method offers high sensitivity, good selectivity, and the absence of large equipment that makes it suitable for field analysis.     

Preconcentration of trace chalcophile elements by a zincon--loaded resin and its application to neutron activation analysis (author's transl)]

A chelating agent-loaded resin consisting of an anion exchange resin and zincon which has widely been employed as a specific reagent for zinc(II) and copper(II) in spectrophotometry was prepared. The adsorption behavior of some chalcophile elements was studied in detail, with respect to pH, flow rate and exchange capacity. From the results, it was confirmed that the zincon-loaded resin reacts selectively with copper(II), zinc(II), mercury(II) and lead(II) at lower pH region, and the above reaction is stoichiometric as in the case of the reaction of zincon with metal ions in aqueous solution. Furthermore, the zincon-loaded resin was applied to the selective concentration of trace amounts of chalcophile elements in natural water samples prior to neutron activation analysis. Water samples taken from the Watarase River were filtered and the pH of each filtrate was adjusted to ca. 5.5. After preconcentration was made by the column method (zincon-loaded resin: 2 x 10-4 mol/g resin, 1.0 g, 7 mm phi x 35 mm), the resin in the column was washed and dried in a desiccator. The standard material was also prepared according to the above mentioned scheme. The sample and the standard materials packed in polyethylene vials were irradiated for 40 min by a neutron flux of 5 x 10(13 n.cm-2.sec-1 in the JRR-4 of the Japan Atomic Energy Research Institute. After cooling the materials, activity measurements were made. The results were 53 ppb for copper, 0.25 ppb for mercury.     

Preparation and analytical properties of a chelating resin containing cysteine groups

A macroporous, cross-linked polyacrylonitrile copolymer was synthesized, the nitrile groups were converted to carboxylic acid by hydrolysis, and these carboxylic acid groups were treated with L-cysteine and 1,6-hexanediol (binding agent). Studies of the basic characteristics of this resin showed that it was highly selective for silver(I), mercury(II), gold(III) and platinum(IV) in aqueous acidic solution, the maximum capacities being 0.97, 0.65, 1.22 and 0.39 mmol g^-1 of dry resin, respectively. These four metal ions can be separated from each other, or concentrated from very dilute solutions, on a short column of the resin. The effects of different acids and of various common metal ions are reported.     

Extraction of zinc and cadmium thiocyanate complexes in the presence of pyridine and some metal ion separations

Extraction of zinc(II) and cadmium(II) from ammonium thiocyanate solutions has been studied in benzene in the presence of pyridine. The effect of such variables as the pH of aqueous phase and concentration of metal, thiocyanate and pyridine on extraction has been investigated and the extracting species identified. Extraction behaviour of silver(I), manganese(II), cobalt(II), mercury(II) and thallium(III) has also been studied under identical conditions and some binary metal ion separations of analytical and radiochemical importance are reported.     

Layer-by-layer self-assembly polytungstogermanate multilayer films and their photocatalytic properties under sunlight irradiation

Seven different types of thio- and/or amine-modified cellulose resin materials were synthesized and their mercury (II) ion adsorption properties determined. All seven resins showed good mercury (II) adsorption capability in the more neutral pH regions. However, the o-benzenedithiol- and o-aminothiophenol-modified cellulosic resins were found to be very effective in removing mercury (II) ions from strongly acidic media. For example, 93.5-100% mercury (II) ion recoveries from very acid aqueous solutions (nitric acid concentration ranged from 0.1 to 2.0 mol/L) were obtained using the o-benzenedithiol-modified resin while recoveries ranged from ca. 50% to 60% for the o-aminothiophenol-modified resin. An adsorption capacity of 23 mg (as Hg atoms) per gram of resin was observed for the o-benzenedithiol-modified cellulose in the presence of 1.0 mol/L nitric acid. This same resin shows very good selectivity for mercury (II) as only ruthenium (II) also somewhat adsorbed onto it out of 14 other metal ions studied (Ag(+), Al(3+), As(3+), Co(2+), Cd(2+), Cr(3+), Cu(2+), Fe(3+), Mn(2+), Ni(2+), Pt(2+), Pb(2+), Ru(2+), and Zn(2+)).     

Substituted 2-thiophenealdehyde-2-benzothiazolyl-hydrazones as analytical reagents for copper

The analytical properties of 5-chloro-, 5-bromo- and 5-methyl-2-thiophenealdehyde-2-benzothiazolylhydrazone (CTBH, BTBH and MTBH, respectively), are compared with those of 2-thiophenealdehyde-2-benzothiazolylhydrazone (TBH). The acid dissociation constants have been determined, and the 5-substituent effect is discussed. The complex formation of the reagents with several metal ions has been examined spectrophotometrically. Extraction—spectrophotometric determinations of traces of copper are proposed. The copper complexes can be extracted quantitatively into benzene over wide pH ranges (from weakly acidic to alkaline medium) and the molar absorptivities are high (4–5· 10⁴ l mol^-1 cm^-1). The complexes formed are 1:2 (copper:ligand) in all cases. There are few interferences from common ions except silver(I), mercury(II), thiocyanate and citrate.     

Preparation and Analytical Application of a New Chelating Ion Exchange Resin Containing Thioglycolic Acid

Starting from copolymerization of acrylonitrile and divinylbenzene by emulsion polymerization technique, a macroporous, crosslinked polyacrylonitrile copolymer was synthesized. The nitrile groups on the copolymer resin were converted into carboxylic acid groups by hydrolysis with strong alkaline solution of sodium hydroxide to obtain the resin matrix with carboxylic acid groups. A new chelating ion exchange resin containing alkylthioglycolate was prepared by esterification of carboxylic acid groups on the resin matrix and thioglycolic acid with 1,6-hexanediol as binding part. After studies of the basic characters, ion exchange ability, exchange rate and acidity of the medium, it was found that the new resin obtaind was highly selective for silver(I), mercury(II), gold(III) and bismuth(III) in acidic-aqueous solution. Separation of these metal ions from each other and concentration of these metal ions from very dilute solution were studied by liquid chromatography using a short column of this new resin. The analytical applications of this new resin are reported.     

Voltammetric determination of mercury(II) at a carbon paste electrode in aqueous solutions containing tetraphenylborate ion

The determination of mercury(II) ions can be achieved by monitoring the decrease in the oxidation peak of the tetraphenylborate ion in the presence of this metal ion at a carbon paste electrode. The reaction between mercury(II) and the tetraphenylborate ion results in the formation of diphenylmercury, thus providing the method with good selectivity over other metal ions. Using anodic stripping voltammetry in a neutral electrolyte, a linear dependence of the decrease of peak height was observed on increasing the mercury(II) concentration in the range 1 x 10(-6)-8 x 10(-9)M mercury(II). Zinc(II), cadmium(II), lead(II), nickel(II), cobalt(II), tin(II), potassium(I) and ammonium(I) ions did not interfere at a 1000-fold concentration excess. Iron(III) and chromium(III) did not interfere at a 250-fold and 50-fold concentration excess, respectively. Following masking procedures, copper(II), bismuth(III) and silver(I) did not interfere at a 100-fold concentration excess. The method can be used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

Liquid-liquid extraction of metal ions by the 6-membered N-containing macrocycle hexacyclen

The nitrogen-containing analogue of 18-crown-6, 1,4,7,10,13,16-hexa-azaoctadecane (hexacyclen)] was studied as a reagent for complexation and extraction of some metal ions. It was found that with this reagent and methyl isobutyl ketone, metal ions such as silver(I), mercury(II), copper(II), platinum(II) and palladium(II) can be quantitatively extracted and separated from iron(III) and some other metal ions.     

Preparation of Amberlite XAD resins coated with dithiosemicarbazone compounds and preconcentration of some metal ions

The Amberlite XAD resins coated with dithiosemicarbazones were prepared and their collection behavior of metal ions from aqueous solution was investigated. Among the resins used, the reagent-loaded Amberlite XAD-7 was found to be superior for the collection of metal ions to other reagent-loaded resins used. The quantitative collection of mercury(II), palladium(II) and copper(II) was obtained from acidic medium, while cadmium(II) and lead(II) was obtained from neutral medium by the Amberlite XAD-7 resin coated with dimethylglyoxal bis(4-phenyl-3-thiosemicarbazone) (DMBS). These metal ions collected on the resin were easily eluted with a small volume of N,N-dimethylformamide as their DMBS chelates. This collection-elution method was applied to the determination of their metal ions by reversed-phase high performance liquid chromatography with a spectrophotometric detection.     

Synthesis and application of modified poly (styrene‐alt‐maleic anhydride) networks as a nano chelating resin for uptake of heavy metal ions

A chelating resin based on modified poly (styrene‐alt‐maleic anhydride) with 3‐aminobenzoic acid was synthesized. This modified resin was further reacted by 1,2‐diaminoethane or 1,3‐diaminopropane in the presence of ultrasonic irradiation to prepare tridimensional chelating resin for the removal of heavy metal ions from aqueous solutions. The adsorption behavior of Fe(II), Cu(II), Zn(II) and Pb(II) ions was investigated by synthesized chelating resins in various pH. Among the synthesized resins, CSMA‐AB1 and CSMA‐AB2 demonstrated a high affinity for the selected metal ions compared to SMA‐AB, and the order of removal percentage changes as follow: Fe(II) > Cu(II) > Zn(II) > Pb(II). The adsorption of all metal ions in acidic medium was moderate, and it was favored at the pH value of 6 and 7. Also, the prepared resins were examined for removal of metal ions from industrial wastewater and were shown to have a very efficient adsorption in the case of Cu(II), Fe(II) and Pb(II); however, the adsorption of Zn(II) was lower than others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis and thermogravimetric analysis/derivative thermogravimetry. Copyright © 2012 John Wiley & Sons, Ltd.