Surface‐Plasmon‐Enhanced Band Emission of ZnO Nanoflowers Decorated with Au Nanoparticles

A simple strategy was used to enhance band emission through the transfer of defect emission from ZnO to Au by using the energy match between the defect emission of ZnO and the surface plasmon absorbance of Au NPs through decorating the surface of ZnO nanoflowers with Au nanoparticles (Au NPs). The ZnO nanostructure, which was comprised of six nanorods that were attached on one side in a flower‐like fashion, was synthesized by using a hydrothermal method. The temperature‐dependent morphology and detailed growth mechanism were studied. The influence of the density of the Au NPs that were deposited onto the surface of ZnO on photoluminescence was investigated to optimize the configuration of the ZnO/Au system in terms of the maximum band emission. The sequential transfer of defect energy from ZnO to Au and electron transfer from excited Au to ZnO was proposed as a possible mechanism for the enhanced band emission.     

Photoselective excited state dynamics in ZnO-Au nanocomposites and their implications in photocatalysis and dye-sensitized solar cells

Improving the performance of photoactive solid-state devices begins with systematic studies of the metal-semiconductor nanocomposites (NCs) upon which such devices are based. Here, we report the photo-dependent excitonic mechanism and the charge migration kinetics in a colloidal ZnO-Au NC system. By using a picosecond-resolved F?rster resonance energy transfer (FRET) technique, we have demonstrated that excited ZnO nanoparticles (NPs) resonantly transfer visible optical radiation to the Au NPs, and the quenching of defect-mediated visible emission depends solely on the excitation level of the semiconductor. The role of the gold layer in promoting photolytic charge transfer, the activity of which is dependent upon the degree of excitation, was probed using methylene blue (MB) reduction at the semiconductor interface. Incident photon-to-current efficiency measurements show improved charge injection from a sensitizing dye to a semiconductor electrode in the presence of gold in the visible region. Furthermore, the short-circuit current density and the energy conversion efficiency of the ZnO-Au NP based dye-sensitized solar cell (DSSC) are much higher than those of a DSSC comprised of only ZnO NP. Our results represent a new paradigm for understanding the mechanism of defect-state passivation and photolytic activity of the metal component in metal-semiconductor nanocomposite systems.     

Photophysical Characteristics of Multicolor Emitting MDMO-PPV–DMP/ZnO Hybrid Nanocomposites

The tuning of photophysical properties of the poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene]—end capped with dimethylphenyl (DMP), MDMO-PPV–DMP, was achieved by incorporation of ZnO NPs with various contents. Hybrid nanocomposites of MDMO-PPV–DMP with ZnO NPs were prepared by solution blending method and then deposited onto glass substrates. The structural properties of the hybrid nanocomposites samples were characterized using X-ray diffraction, FTIR, and FE-SEM, while their optical properties were extracted from the absorption and photoluminescence spectra. The energy band gap, energy tail, steepness parameter, and CIE chromatic coordinates were tuned by increase the content of ZnO NPs into the polymer matrix. The ZnO NPs incorporation assists the emission wavelength shift and multicolor emitting from the hybrid nanocomposites.     

Nanoscale connectivity in a TiO2/CdSe quantum dots/functionalized graphene oxide nanosheets/Au nanoparticles composite for enhanced photoelectrochemical solar cell performance

Electron transfer dynamics in a photoactive coating made of CdSe quantum dots (QDs) and Au nanoparticles (NPs) tethered to a framework of ionic liquid functionalized graphene oxide (FGO) nanosheets and mesoporous titania (TiO(2)) was studied. High resolution transmission electron microscopy analyses on TiO(2)/CdSe/FGO/Au not only revealed the linker mediated binding of CdSe QDs with TiO(2) but also, surprisingly, revealed a nanoscale connectivity between CdSe QDs, Au NPs and TiO(2) with FGO nanosheets, achieved by a simple solution processing method. Time resolved fluorescence decay experiments coupled with the systematic quenching of CdSe emission by Au NPs or FGO nanosheets or by a combination of the latter two provide concrete evidences favoring the most likely pathway of ultrafast decay of excited CdSe in the composite to be a relay mechanism. A balance between energetics and kinetics of the system is realized by alignment of conduction band edges, whereby, CdSe QDs inject photogenerated electrons into the conduction band of TiO(2), from where, electrons are promptly transferred to FGO nanosheets and then through Au NPs to the current collector. Conductive-atomic force microscopy also provided a direct correlation between the local nanostructure and the enhanced ability of composite to conduct electrons. Point contact I-V measurements and average photoconductivity results demonstrated the current distribution as well as the population of conducting domains to be uniform across the TiO(2)/CdSe/FGO/Au composite, thus validating the higher photocurrent generation. A six-fold enhancement in photocurrent and a 100 mV increment in photovoltage combined with an incident photon to current conversion efficiency of 27%, achieved in the composite, compared to the inferior performance of the TiO(2)/CdSe/Au composite imply that FGO nanosheets and Au NPs work in tandem to promote charge separation and furnish less impeded pathways for electron transfer and transport. Such a hierarchical rapid electron transfer model can be adapted to other nanostructures as well, as they can favorably impact photoelectrochemical performance.     

Au催化剂对于碱性电解质中氧气电化学还原反应的纳米尺寸效应

使用旋转电极技术考察了一系列碳载金纳米颗粒(颗粒平均尺寸处在3~14 nm)在碱性电解质(0.5 mol/L KOH)中对氧还原反应的催化行为.随着金纳米颗粒尺寸由14 nm下降至3 nm,其对氧还原反应的本征活性和质量比活性均呈现持续走高趋势; 但金颗粒的纳米尺寸对氧还原反应的机理及分子氧还原过程中的电子转移数目并无显著影响.使用高分辨透射电镜技术表征了金纳米颗粒的形貌,通过对金颗粒表面不同位置原子的比例进行估算,发现金颗粒表面高能原子所占比例与金对氧还原反应的本征活性密切相关,表明高能表面原子决定着金催化剂对氧还原反应的本征活性.此外,还将金纳米颗粒对氧还原反应的本征催化活性与其表面电子结构进行了关联.     

Organic–Inorganic Azafullerene‐Gold C59N‐Au Nanohybrid: Synthesis,Characterization, and Properties

Azafullerene (C₅₉N) was functionalized using a Mannich‐type reaction and then subsequently condensed with lipoic acid to yield dithiolane‐modified C₅₉N. In the following step, the extended dithiolane moiety from the C₅₉N core was utilized to decorate the azafullerene sphere with gold nanoparticles (Au NPs). The latter were initially stabilized with dodecanothiol (DT ? Au) and then integrated on azafullerene through a ligand exchange reaction with the dithiolane‐functionalized C₅₉N to produce the C₅₉N/DT ? Au nanohybrid. The nanohybrid was fully characterized by spectroscopy and microscopy, revealing the formation of spherical nanoparticles with a diameter in the range of 2–5 nm, as imaged by HR‐TEM. In the electronic absorption spectrum of C₅₉N/DT ? Au nanohybrid, the characteristic surface plasmon band (SPB) of Au NPs was observed, however, it was redshifted compared with that of DT ? Au. The redshift of the SPB is indicative of closer interparticle proximity of Au NPs, in accordance with the formation of aggregated NPs as observed by TEM, in C₅₉N/DT ? Au nanohybrid. Excited‐state interactions in C₅₉N/DT ? Au were probed by photoluminescence assays. It was found that the weak emission of C₅₉N at 819 nm was blueshifted by 14 nm in C₅₉N/DT ? Au, but was stronger in intensity, thus suggesting energy transfer to C₅₉N, within the organic–inorganic C₅₉N/DT ? Au nanohybrid. Finally, with the aid of pump–probe measurements and transient absorption spectroscopy, the formation of the singlet excited state of C₅₉N was identified.     

Calcination temperature-dependent morphology of photocatalytic ZnO nanoparticles prepared by an electrochemical–thermal method

ZnO nanoparticles (NPs) with tunable morphologies were synthesized by a hybrid electrochemical–thermal method at different calcination temperatures without the use of any surfactant or template. The NPs were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction, dynamic light scattering, thermogravimetry–differential thermal analysis, scanning electron microscope and N₂ gas adsorption–desorption studies. The FT-IR spectra of ZnO NPs showed a band at 450 cm^?1, a characteristic of ZnO, which remained fairly unchanged at calcination temperatures even above 300 °C, indicating complete conversion of the precursor to ZnO. The products were thermally stable above 300 °C. The ZnO NPs were present in a hexagonal wurtzite phase and the crystallinity of ZnO increased with an increasing calcination temperature. The ZnO NPs calcined at lower temperature were mesoporous in nature. The surface areas of ZnO NPs calcined at 300 and 400 °C were 51.10 and 40.60 m² g^?1, respectively, which are significantly larger than commercial ZnO nanopowder. Surface diffusion has been found to be the key mechanism of sintering during heating from 300 to 700 °C with the activation energy of sintering as 8.33 kJ mol^?1. The photocatalytic activity of ZnO NPs calcined at different temperatures evaluated by photocatalytic degradation of methylene blue under sunlight showed strong dependence on the surface area of ZnO NPs. The ZnO NPs with high surface area showed enhanced photocatalytic activity.     

Improvement of the performance of dye sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

Well-aligned zinc oxide (ZnO) nanorods (NRs) arrays deposited with Ag nanoparticles (NPs) are prepared by a liquid phase epitaxial growth process followed by a reduction of Ag on the surface of the ZnO NRs. Transmission electron microscopy images show that most Ag NPs are deposited on the upper part of the ZnO NRs, and the overall optical absorption in the range of visible light can be enhanced due to the surface plasmon resonance of the Ag NPs. ZnO NRs with and without Ag NPs are used to assemble dye sensitized solar cells. Devices fabricated from the Ag NPs/ZnO NRs composite arrays exhibit a higher open voltage, short circuit current and fill factor than that fabricated from the bare ZnO NRs array, thus, the overall efficiency of the as-fabricated cell is increased from less than 0.5?% to 0.8?%. The main reason for the enhancement of the device performance may be ascribed to that the electron transfer back from ZnO to the dye and electrolyte is blocked by the Schottky barrier at the Ag/ZnO interface, resulting in a great increase of the electron density at the ZnO conduction band.     

Bio-inspired catechol chemistry for electrophoretic nanotechnology of oxide films

The stabilization of defects in ZnO at high temperatures has been investigated. The properties of unmodified and modified ZnO nanoparticles (NPs) with 2 at.% of Ag prepared by microwave assisted combustion method, have been systematically studied using X-ray diffraction (XRD), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS) and photocatalytic activity measurements. Though the XRD data shows a marginal shift in the ZnO peak position upon Ag addition, the amount of shift does not change with annealing temperatures. The PL data reveals that the defect mediated visible emission intensity of unmodified ZnO NPs increases with increase in the annealing temperature, whereas it remains almost unchanged in Ag-ZnO. This study clearly establishes that silver is an efficient stabilizer of intrinsic defects in ZnO at high temperatures. This is further supported by the core and valence band XPS spectra.     

全固态Z-型CdS/Au/Bi2MoO6异质结的构筑及其光催化性能

采用简单的化学还原沉积和二次水热的方法成功制备了CdS和Au共同修饰Z型CdS/Au/Bi2MoO6(CdS/Au/BMO)光催化剂。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征。实验结果表明,CdS/Au/BMO-2复合材料在可见光照射下表现出最佳的降解效率,其降解RhB的速率常数约为BMO的8.8倍和CdS的20倍。Au NPs作为固态电子媒介,为光生电子的传输和转移提供了一个通道,同时Au NPs的表面等离子体共振(SPR)效应和CdS纳米粒子显著拓宽了催化体系对可见光的响应范围;通过对催化剂的组成、结构和光电性能表征,确定了CdS/Au/BMO的能带结构,进而探讨了CdS/Au/BMO活性增强机制。     

Wavelength Dependence of the Fluorescence Quenching Efficiency of Nearby Dyes by Gold Nanoclusters and Nanoparticles: The Roles of Spectral Overlap and Particle Size

The efficiency of the glutathione monolayer-protected gold nanocluster (NC) Au(25) (1.2 nm metal core diameter (d)) in quenching the emission of dyes intercalated into DNA is compared to that of 2 and 4 nm gold nanoparticles (NPs). In all cases, the DNA/dye moieties and the gold particles are not covalently attached but rather form non-covalent ground state complexes. Under these conditions, steady-state measurements reveal that the quenching efficiency of Au(25) is a factor of 10 lower than that of plasmonic 4 nm gold NPs but comparable to that of 2 nm particles which do not show a distinct plasmon band. Nonetheless, significant emission quenching is observed even at very low (nM) concentrations of Au(25). The quenching efficiency of the 4 nm NPs is significantly higher for dyes emitting near the wavelength of the plasmon peak whereas that of the 2 nm gold NPs is well described by the nano-surface energy transfer (NSET) model proposed by the Strouse group (J. Am. Chem. Soc. 127, 3115 2005). Interestingly, for Au(25) the maximum quenching efficiency occurs for dyes emitting in the same wavelength range as that of the 2 and 4 nm NPs (490-560 nm), where it shows no discrete absorption features, rather than for wavelengths coincident with its HOMO-LUMO, intra-band or inter-band transitions. The fluorescence quenching properties of Au(25) NCs are therefore found to be distinct from those of larger NCs and NPs but do not appear to conform to theoretical predictions advanced thus far.     

Photoconductivity and photoluminescence of ZnO nanoparticles synthesized via co-precipitation method

Photoconductivity and photoluminescence studies of ZnO nanoparticles (NPs) synthesized by co-precipitation method capped with thioglycerol are carried out. The effect of annealing at 300°C is also studied. The transmission electron micrograph (TEM) and X-ray diffraction (XRD) pattern confirm the hexagonal wurtzite structure of ZnO nanoparticles. The UV-vis absorption spectrum of ZnO NPs shows blue shift of absorption peak as compared to bulk ZnO. The photoluminescence (PL) spectra of as-synthesized ZnO NPs show band edge emission as well as blue-green emission. After annealing band edge emission is quenched. Photocurrent is found to vary super linearly at high voltage for both as-synthesized as well as annealed ZnO NPs. Time resolved rise and decay photocurrent spectra are found to exhibit anomalous photoconductivity for as-synthesized as well as annealed ZnO NPs wherein the photocurrent decreases even during steady illumination.     

Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC)

Well-aligned ZnO nanorods (NRs) were grown on indium-tin-oxide (ITO) slide by the hydrothermal method and used as templates for preparing ZnO/Au composite nanoarrays. The optical and morphological properties of ZnO/Au composites under various HAuCl(4) concentrations were explored via UV-vis absorption spectroscopy, photoluminescence (PL) and scanning electron microscopy (SEM). The density and size of gold nanoparticles (Au NPs) on ZnO NRs can be controlled by adjusting the concentration of HAuCl(4). The optimal ZnO/Au composites display complete photocatalytic degradation of methyl blue (MB) within 60 min, which is superior to that with pure ZnO NRs prepared by the same method. The reason of better photocatalytic performance is that Au NPs act as electron traps and it prevents the rapid recombination of electrons and holes, resulting in the improvement of photocatalytic efficiency. The photocatalytic performance of ZnO/Au composites is mainly controlled by the density of Au NPs formed on ZnO NRs. The application in rapid photodegradation of MB shows the potential of ZnO/Au composite as a convenient catalyst for the environmental purification of organic pollutants.     

Au Nanoparticles Supported Nanoporous ZnO Sphere for Enhanced Photocatalytic Activity Under UV-Light Irradiation

Monodispersed 200 nm-sized ZnO spheres (SPs) with porous structure emanating from 8 nm zinc oxide nanoparticles (NPs) composing the SPs were synthesized by dissolving zinc acetate dihydrate in diethylene glycol at 160 °C. The prepared SPs were employed in fabricating the gold (Au) loaded ZnO (Au/ZnO SP) composite materials, exhibiting high photocatalytic activity in decomposing salicylic acid under UV-light irradiation. It is deduced that its high catalytic activity originates from the charge separation by transferring photoinduced electrons from the conduction band (CB) of ZnO to Au, since the CB level of ZnO (?0.5 V vs. NHE) is located more negative side than that of Au (+0.5 V vs. NHE). The evidence for the charge separation was provided by monitoring^.OH radical with bare ZnO SPs and Au/ZnO SP produced in the solution which readily react with 1,4-terephthalic acid (TA) inducing 2-hydroxy terephthalic acid (TAOH) that shows unique fluorescence peak at 426 nm.     

合成ZnO纳米阵列及刺突状CuO/ZnO异质结

采用低温水热法在掺氟SnO₂ (FTO)导电玻璃表面制备ZnO纳米阵列, 研究了前驱体溶液浓度摩尔配比对ZnO纳米阵列形貌、光学性能及其生长机理的影响. 研究发现, 随着前驱体溶液浓度摩尔配比的增加, ZnO纳米阵列形貌及光学性能也随之变化. ZnO纳米阵列高度逐渐降低, ZnO纳米阵列直径和光学带隙值大体上出现先增大后降低的趋势. 而当前驱体溶液(Zn(NO₃)₂:环六亚甲基四胺(HMT, C₆H₁₂N₄))浓度摩尔配比为5:5时, 其光学禁带值(3.2 eV)接近于理论值. 结果显示制备ZnO纳米阵列的最优浓度摩尔配比为5:5. 随后选用最优浓度摩尔配比下制备的ZnO纳米阵列为基底, 通过一种两步溶液法成功在其表面制备刺突状CuO/ZnO异质结.从场发射扫描电镜(FE-SEM)结果中可以清楚看见, 大量的CuO纳米粒子沉积在ZnO纳米阵列表面形成刺突状异质结结构.研究发现该CuO/ZnO纳米异质结相对于纯ZnO纳米阵列在紫外光下光催化性能明显增加. 最后, 讨论了CuO/ZnO纳米异质结光催化机理.     

Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

水热法合成CdS/ZnO核壳结构纳米微粒

以半胱氨酸镉配合物为前驱体,采用水热法合成CdS纳米微粒,并以ZnO对其进行表面修饰,形成具有核／壳结构的CdS／ZnO半导体纳米微粒,CdS纳米微粒表面经ZnO修饰后,其带边发射大大增强,透射电镜显示,110℃下反应4h所得的CdS／ZnO颗粒尺寸约为20nm,电子衍射表明其结构为六方相。     

Upconversion emission enhancement of Gd3+ ions induced by surface plasmon field in Au@NaYF4 nanostructures codoped with Gd(3+)-Yb(3+)-Tm(3+) ions

Au nanoparticles (NPs) attached β-NaYF(4) nanocrystals codoped with Gd(3+)-Yb(3+)-Tm(3+) were synthesized by a facial solution method. The UV-vis-near-infrared absorption spectrum shows typical surface plasmon resonance band of Au NPs in addition to the characteristic absorption peaks of Yb(3+) ion. X-ray diffraction and selected area electron diffraction results indicate the existence of Au NPs. The transmission electron microscopic image reveals the formation of Au@NaYF(4) nanostructures. Enhanced ultraviolet (UV) upconversion luminescence (UCL) was observed in the nanostructures under the excitation of 980-nm infrared laser. The largest enhancement factor was obtained as 76 for the (6)I(J)→(8)S(7/2) emission of Gd(3+) ions, which was much larger than those emission enhancement factors of Tm(3+). It is for the first time to our knowledge that the emission enhancement of Gd(3+) ions was obtained. Local field enhancement induced by Au NPs was found to be responsible for the UCL enhancement, which is the further experimental evidence of local field enhancement theory. Magnetic measurements of the Au@NaYF(4) nanostructure indicated it would have potential application in magnetic resonance imaging.     

Z型可见光催化剂Au NPs/g-C3N4/BiOBr的构建及其光催化性能

通过水热和原位还原法制备了一种新型Z型异质结三元复合材料Au NPs/g-C₃N₄/BiOBr,并通过X射线衍射、X射线光电子能谱、透射电子显微镜、紫外-可见漫反射光谱和光致发光发射光谱等技术对材料的形貌、结构进行了表征。通过在可见光下降解苯酚来评价光催化剂的活性。研究发现,Au NPs/g-C₃N₄/BiOBr显示出增强的光催化活性,对苯酚的降解能力是g-C₃N₄的3倍,是BiOBr的2.5倍。这可归因于三元复合材料的窄带隙（2.10eV）、Z型机理对光生电子-空穴对的有效分离和Au纳米颗粒的表面等离子体共振效应（SPR）。     

Zinc Oxide Nanoparticle‐modified Glassy Carbon Electrode as a Highly Sensitive Electrochemical Sensor for the Detection of Caffeine

Zinc oxide nanoparticles (ZnO NPs ) were prepared by a simple, convenient, and cost‐effective wet chemical method using the biopolymer starch. The prepared ZnO NPs were characterized by X‐ray diffraction (XRD ), scanning electron microscopy (SEM ), energy‐dispersive X‐ray (EDX ), Fourier transform infrared (FT‐IR ), and UV ‐visible spectroscopic techniques. The average crystallite size calculated from XRD data using the Debye–Scherer equation was found to be 15 nm. The electrochemical behavior of caffeine (CAF ) was studied using a glassy carbon electrode (GCE ) modified with zinc oxide nanoparticles by cyclic voltammetry (CV ) and differential pulse voltammetry (DPV ). Compared to unmodified GCE , ZnO NPs‐ modified GCE (ZnO NPs MGCE ) exhibited excellent electrocatalytic activity towards CAF oxidation, which was evident from the increase in the peak current and decrease in the peak potential. Electrochemical impedance study suggested that the charge‐transfer capacity of GCE was significantly enhanced by ZnO NPs . The linear response of the peak current on the concentrations of CAF was in the range 2–100 μM . The detection limit was found to be 0.038 μM. The proposed sensor was successfully employed for the determination of CAF in commercial beverage samples.