Synthesis of an isostere of an O-linked glycopeptide

[reaction: see text] A route for the synthesis of an electrophilic, carbocyclic galactose equivalent from D-galactose is described. The strategy utilizes ring-closing metathesis with Grubbs's second-generation catalyst as the key step. The galactose-derived electrophile reacted in an S(N)2 fashion with N-Boc-cysteine methyl ester to provide an alpha-galactosylserine isostere. The method was extended to the synthesis of a glycopeptide isostere.     

The first example of an ene reaction between an ester of cyclopropenecarboxylic acid and an alkyne

Methyl cyclopropenecarboxylate (I) enters into the ene reaction with the cyclic acetylene (II), giving vinylcyclopropene (III) with a high yield.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1229–1230, May, 1991.     

Effect of an electric field on an interfacial profile

We consider the interface between two dielectric liquids in an electric field which is parallel to the interface. Using the Ginsburg-Landau model for binary fluids we add a term for the electric field energy and show that near the critical point the effect of the electric field is to change both the interface width and the critical temperature.     

The silver salt of 12-tungstophosphoric acid: an efficient catalyst for the three-component coupling of an aldehyde, an amine and an alkyne

A three-component coupling of an aldehyde, an alkyne and an amine to prepare propargylamines was performed using the silver salt of 12-tungstophosphoric acid (Ag₃PW₁₂O₄₀) as a heterogeneous catalyst under mild reaction conditions in the absence of any co-catalyst. A variety of aldehydes and amines were converted to the corresponding propargylamines demonstrating the versatility of the reaction. The Ag₃PW₁₂O₄₀ (AgTPA) catalyst was recovered quantitatively by a simple filtration and reused several times.     

Integration of an electrochemical-based biolithography technique into an AFM system

An ordinary atomic force microscopy (AFM) was functionalized and applied to electrochemically draw micropatterns of biomolecules. To fabricate an electrochemical AFM probe having an electrode at the tip, a metal-coated AFM probe was first insulated with Parylene C, and then the apex of the tip was ground mechanically to expose the electrode. The effective electrode diameter was estimated to be ca. 500 nm. The electrode probe was positioned close to a heparin-coated antibiofouling substrate and used to locally generate hypobromous acid from a dilute Br⁻ solution to render the substrate surface protein-adhesive. In situ topographical imaging after the electrochemical treatment suggested the heparin layer became detached to allow the adsorption of proteins, in this case fibronectin. The diameter of the drawn fibronectin pattern was 2 μm, which is one order of magnitude smaller than we achieved previously using a microdisk electrode (tip diameter 10 μm). Figure AFM configuration integrated with the electrochemical-based surface modification and resultant micropatterns of fluorescence-labeled fibronectin Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Formation of an unusual charge-transfer network from an ionic liquid

An intriguing and novel charge-transfer complex between dimethyldihydrophenazine and diethylviologen has been crystallized from an ionic liquid at room temperature, resulting in an interesting stacking motif of interrupted D***A***D type triads: efficient formation of the complex is seen within an ionic liquid and acetone, with the complex absorbing strongly across nearly the entire visible-NIR spectral region.     

Adsorption study of an industrial dye by an organic clay

In this study, the adsorption of an industrial dye Supranol Yellow 4GL onto Cetyltrimethylammonium-bentonite (CTAB-bentonite) is investigated. The organobentonite is synthesised by exchanging cetyltrimethylammonium cations (CTAB) with inorganic ions on the surface of bentonite. The adsorption of Supranol Yellow 4GL onto organobentonite is found to be maximum when the concentration of CTAB exchanged is 100% according to the cation exchange capacity of the clay (CEC). The modification of organobentonite is examined using XRD and FTIR techniques. The effect of the process parameters such as: contact time, adsorbate concentration, adsorbent dose, pH and temperature are reported. Nearly 1200 seconds of contact time are found to be sufficient for the adsorption to reach equilibrium. The pseudo second order model is used to describe the kinetic data, and the rate constant is therefore evaluated. The dye adsorption to organobentonite is characterized by monolayer isotherm and caused by adsorption with relatively strong uptake. The Langmuir and Freundlich models adsorption are applied to describe the isotherm equilibrium and to determine its constants. The Langmuir and Freundlich models agree well with the experimental data with a adsorption capacity of 0.5 g of dye per g of organobentonite. A better fixation was obtained at acidic pH. The effect of temperature on the adsorption of dye has been also studied and the thermodynamic parameters ΔH, ΔS, ΔG, were determined. Organobentonite is found to be effective for removing Supranol Yellow 4GL dye from wastewater.     

Pi-dimer of an aniline dimer: an ESR-UV-vis spectroelectrochemical study

It is shown for the first time that the most important intermediate formed during aniline polymerization, the p-aminodiphenylamine, forms a pi-dimer under oxidation at room temperature in acidified organic solvents that are used in electropolymerization. N-Phenylquinonediimine, which is generally assumed to be formed under oxidation, is only formed in basic solutions and in ionic liquids. Most of the mechanistic studies reported so far take the formation of N-phenylquinonediimine under consideration, although it is not consistent with the UV-vis spectra measured during oxidation of p-aminodiphenylamine. The formation of a pi-dimer is very well consistent with the electronic spectra of the oxidation product. In this way the pi-dimer is very important for the interpretation of the UV-vis spectra of higher oligomers and polyaniline as well. Furthermore, it offers a new interpretation of the redox behavior of p-aminodiphenylamine as found by cyclic voltammetry and has to be considered in the mechanism of the electrochemical polyaniline formation.     

一种带有芳基双亲双官能度引发剂的合成

双亲聚合物已广泛地应用于许多领域^[1],但其制备困难^[2~4].     

Universality of an estimate of the minimum size of an equilibrium phase

The universality of an estimate of the minimum size of small particles with equilibrium phase properties is discussed. Liquid drops in the vapor phase and liquid in porous solids are considered. It is found that the sizes of thermodynamically-stable liquid drops and pore sizes are similar when there is stratifying of a fluid on two phases. It is suggested that the minimum sizes of particles with equilibrium phase properties are the same for magnetic materials as well. Examples of experimental data favoring this suggestion are shown.     

Converting an Esterase into an Epoxide Hydrolase

Entering the fold : A common structural motif in hydrolytic enzymes is the α,β‐hydrolase fold. The interconversion of one enzyme into another by introduction of mechanistically important residues is not enough; only substitution of a loop allows epoxide hydrolase activity in the esterase scaffold to be formed (see picture; structure comparison of epoxide hydrolases (green) with the esterase (orange)). The result is an enantioselective chimeric enzyme.

     

Evaluation of an inductively-coupled plasma with an extended-sleeve torch as an atomization cell for laser-excited fluorescence spectrometry

An inductively-coupled plasma (ICP) with an extended-sleeve torch has been evaluated as an atomization cell for laser-excited fluorescence spectrometry. Limits of detection for 20 lines are given. The detection power is almost equivalent to that obtained by excitation with a hollow-cathode lamp. Interelement effects and spectral interferences are discussed.     

Preparation of an analogue of orbicuside A,an unusual cardiac glycoside

A steroid containing a multi-linked glycoside, analogous to the bufadienolide orbicuside A, has been prepared. The key steps were (i) the preparation of a 2α-allyloxycarbonyloxy-3β-hydroxy steroid, (ii) a Ferrier reaction between the steroid and a rhamnal derivative, (iii) removal of protecting group and oxidation of the 2-hydroxy group, (iv) dihydroxylation of the pseudoglycal from the sterically more hindered side and finally (v) ring closure by acetal formation under acidic conditions.     

Mechanism of Thermal Degradation of an Inorganic-Organic Hybrid Based on an Epoxy-POSS

A novel inorganic-organic hybrid material, belonging to the family of polyhedral oligomeric silsesquioxanes (POSS), was used to reduce the trend of a conventional epoxy-amine system to undergo combustion. The mixtures with different percentages in weight of POSS, and equal number of equivalents between of epoxy and amino groups were tested by thermogravimetic analysis (TGA) in both, argon and oxygen atmospheres. The results indicated that the char/ceramic yield values increase with the content of POSS and therefore, fire resistance is enhanced. Activation energies of degradation processes were obtained by Kissinger-Akahira-Sunose method. An empirical kinetic model satisfactorily explained the degradation mechanism of different blends.