Nanostructured, Gd-doped ceria promoted by Pt or Pd: investigation of the electronic and surface structures and relations to chemical properties

Nanostructured ceria doped with other rare earth elements is a good oxygen ion conductor, which gives rise to various catalytic applications such as the construction of membranes for syngas production by partial oxidation of methane. This article focuses on the Gd-doped cerium dioxides, which can be modified with Pt or Pd to enhance the reactivity of the lattice oxygen in interaction with methane. The aim of the work is the elucidation of correlations between the structural, electronic, and chemical properties of these nanomaterials. Detailed studies were performed for a series of samples with and without surface modification by noble metals using a complex combination of physicochemical methods: XRD, TEM, CH(4) TPR, XPS, SIMS, and FTIR spectroscopy of adsorbed CO. XPS and TPR data revealed that surface modification with noble metals enhances the reducibility of the doped ceria support, where the effect is more pronounced for Pd than for Pt. The formation of highly cationic Pd species due to strong metal support interactions provides a possible explanation for this behavior. Furthermore, the results obtained in the present work for the Gd-doped ceria system are compared to those obtained previously for the Pr-doped ceria system.     

Enhanced reactivity of Pt nanoparticles supported on ceria thin films during ethylene dehydrogenation

The adsorption and reaction of ethylene on Pt/CeO(2-x)/Cu(111) model catalysts were studied by means of high resolution photoelectron spectroscopy (HR-PES) in conjunction with resonant photoemission spectroscopy (RPES). The dehydrogenation mechanism is compared to the HR-PES data obtained on a Pt(111) single crystal under identical conditions. It was found that the Pt nanoparticle system shows a substantially enhanced reactivity and several additional reaction pathways. In sharp contrast to Pt(111), partial dehydrogenation of ethylene on the supported Pt nanoparticles already starts at temperatures as low as 100 K. Similar to the single crystal surface, dehydrogenation occurs via the isomer ethylidene (CHCH(3)) and then mainly via ethylidyne (CCH(3)). In the temperature region between 100 and 250 K there is strong evidence for spillover of hydrocarbon fragments to the ceria support. In addition, splitting of ethylene to C(1) fragments is more facile than on Pt(111), giving rise to the formation of CH species and CO in the temperature region between 250 and 400 K. Upon further annealing, carbonaceous deposits are formed at 450 K. By heating to 700 K, these carbon deposits are completely removed from the surface by reaction with oxygen, provided by reverse spillover of oxygen from the ceria support.     

Composite cathode for IT-SOFC: Sr-doped lanthanum cuprate and Gd-doped ceria

Composite cathodes were synthesized via a citrate combustion method followed by an organic precipitation method. The cathodes were of K₂NiF₄-type crystal structure with x wt.% Ce_0.9Gd_0.1O_1.95 (CGO)–(100 ? x) wt.% La_1.96Sr_0.04CuO_4 + δ (LSC), where x = 0, 10, 20 and 30. The individual structural phases of the composite cathodes were characterized using a third-generation synchrotron source beamline powder X-ray diffractometer (XRD). The porous grain morphology of the CGO–LSC cathode composite for a symmetrical half-cell was determined from cross-sectional scanning electron microscopy images and elemental line profiles. The composite cathode was made of 20 wt.% CGO–80 wt.% LSC (CL20–80) and was coated onto a Ce_0.9Gd_0.1O_1.95 electrolyte. It showed the lowest area specific resistance (ASR) of 0.07 Ω cm² at 750 °C. An electrolyte-supported (300 μm thick) single-cell configuration of CL20–80/CGO/Ni-CGO attained a maximum power density of 626 mW cm^? 2 at 700 °C. The unique composite composition of CL20–80 demonstrates enhanced electrochemical performance and good chemical compatibility with the CGO electrolyte, as compared with the pure LSC (CL0–100) cathode for IT-SOFCs.     

Tungsten carbide nanocrystal promoted Pt/C electrocatalysts for oxygen reduction

Tungsten carbide nanocrystals on carbon (W2C/C) and tungsten carbide nanocrystals and Pt on carbon (Pt-W2C/C) composite electrocatalysts were prepared by the intermittent microwave heating (IMH) method and tested for the electroreduction of oxygen in the acidic media for the first time. The results revealed that the tungsten carbide nanocrystal promoted Pt/C electrocatalyst was very active for ORR with the onset potential of 1.0 V vs SHE at ambient temperature that is over 100 mV more positive compared with that of traditional Pt/C electrocatalyst. The kinetic parameters were determined. The exchange current densities at both high and low overpotential regions are two orders higher for ORR on Pt-W2C/C than that on Pt/C, showing a synergetic effect to improve the activity for ORR. The novel electrocatalysts show a poisoning resistant property toward methanol.     

Kinetic lattice Monte Carlo model for oxygen vacancy diffusion in praseodymium doped ceria: Applications to materials design

Kinetic lattice Monte Carlo (KLMC) model is developed for investigating oxygen vacancy diffusion in praseodymium-doped ceria. The current approach uses a database of activation energies for oxygen vacancy migration, calculated using first-principles, for various migration pathways in praseodymium-doped ceria. Since the first-principles calculations revealed significant vacancy-vacancy repulsion, we investigate the importance of that effect by conducting simulations with and without a repulsive interaction. Initially, as dopant concentrations increase, vacancy concentration and thus conductivity increases. However, at higher concentrations, vacancies interfere and repel one another, and dopants trap vacancies, creating a “traffic jam” that decreases conductivity, which is consistent with the experimental findings. The modeled effective activation energy for vacancy migration slightly increased with increasing dopant concentration in qualitative agreement with the experiment. The current methodology comprising a blend of first-principle calculations and KLMC model provides a very powerful fundamental tool for predicting the optimal dopant concentration in ceria related materials.     

Structural features and the lattice oxygen reactivity of low-temperature lanthanum manganites doped with different cations

Summary Dispersed samples of LaMnO₃prepared viathe Pechini route and annealed at 500°C were doped with cations of a different charge and size (Ce, Fe, Bi, Sr+Bi). The effects of doping on the structural features (XRD, IR) and reducibility (H₂TPR) of these samples were considered.     

Engineering Pt in ceria for a maximum metal-support interaction in catalysis

Conventional supported metal catalysts are metal nanoparticles deposited on high surface area oxide supports with a poorly defined metal-support interface. Typically, the traditionally prepared Pt/ceria catalyzes both methanation (H2/CO to CH4) and water-gas shift (CO/H2O to CO2/H2) reactions. By using simple nanochemistry techniques, we show for the first time that Pt or PtAu metal can be created inside each CeO2 particle with tailored dimensions. The encapsulated metal is shown to interact with the thin CeO2 overlayer in each single particle in an optimum geometry to create a unique interface, giving high activity and excellent selectivity for the water-gas shift reaction, but is totally inert for methanation. Thus, this work clearly demonstrates the significance of nanoengineering of a single catalyst particle by a bottom-up construction approach in modern catalyst design which could enable exploitation of catalyst site differentiation, leading to new catalytic properties.     

过渡金属掺杂铈中晶格氧的活化

采用密度泛函理论计算研究了在铈表面掺杂的过渡金属(TM)离子对表面晶格氧原子活化的影响.为此,测定了经TM离子修饰的CeO2最稳定(111)表面终端的结构和稳定性.除了保持八面体氧配位的锆和铂掺杂剂外, TM掺杂剂在取代表面Ce离子时更倾向于正方形平面配位.除了Pt(1.14 eV)和Zr(正方形平面配位不稳定)外,所有TM掺杂剂的表面结构从八面体到正方形平面都很容易.通常,四价TM阳离子的离子半径比Ce^4+的小得多,从而导致了显著的拉伸应变晶格,并解释了氧空位形成能量的降低.除Zr外,当产生一个氧空位时,优先形成正方形平面结构.热力学分析表明, TM掺杂CeO2表面在典型环境催化条件下存在氧缺陷.一个具有实际意义的例子是锆掺杂CeO2(111)中的晶格氧容易活化,从而有利于CO氧化.研究结果强调了晶格氧活化的本质和TM掺杂剂在TM-铈固溶催化剂中的优选位置.     

On the origin of the lattice constant anomaly in nanocrystalline ceria

The lattice parameter of nanocrystalline ceria films prepared by sputtering was monitored as a function of annealing temperature. Within the temperature range of 150-420 degrees C, an equilibrium with atmospheric oxygen is established within a few hours, whereas grain growth does not occur. On the basis of the experimental results and analysis of literature data, we present a model that posits the formation of a non-uniform grain structure with stoichiometric interiors and oxygen deficient boundaries. This model, based on defect thermodynamics, correctly describes the dependence of the lattice parameter of nanocrystalline ceria on annealing temperature and grain size and can be extended to other materials as well.     

Mild oxygen activation with isobutyraldehyde promoted by simple salts

Oxygen activation using an aldehyde as a sacrificial reductant and mediated by metalloporphyrins is a radical process with a variable induction period in which the macrocycle function is to generate the acyl radicals to initiate a chain mechanism. This function can be also efficiently promoted by simple metal salts, which leads to a very simple and practical oxidative system that is able to epoxidize alkenes in good yields.     

Defect-mediated reactivity of Pt/TiO2 catalysts: the different role of titanium and oxygen vacancies

Defects are ubiquitous in oxide supports and can often tune the catalytic property of supported metal catalysts. This work describes the distinct role of titanium and oxygen vacancies of TiO_2 supports in the catalytic performance of supported Pt catalysts for CO oxidation. Pt was loaded on the TiO_2 supports with oxygen vacancies(VO-TiO_2) and titanium vacancies(VTiTiO_2). It was found that different defects of TiO_2 could distinctively modify the electron property of Pt and thereby CO adsorption strength. The strength of CO adsorption on Pt/VTi-TiO_2 is enhanced, while that of Pt/VO-TiO_2 becomes weaker.Additionally, the presence of defects would also promote the reducibility of catalysts. On the account of the superior redox ability, both Pt/VTi-TiO_2 and Pt/VO-TiO_2 exhibit a higher activity than Pt supported on normal TiO_2 for CO oxidation.     

Selective benzylation of toluene over tungsten promoted ceria catalysts prepared by a “pseudo-template” method

Summary High surface area ceria was prepared by a pseudo-template method and doped with tungsten and sulfate ions. The modified systems were found to catalyze the liquid phase Friedel-Crafts benzylation of toluene using benzyl chloride efficiently with high selectivity towards monoalkylated product. The catalyst systems were characterized by XRD, surface area and pore volume measurements. Acid structural properties were obtained from temperature programmed desorption of ammonia.     

UV and visible Raman studies of oxygen vacancies in rare-earth-doped ceria

Surface properties of rare-earth (RE) doped ceria (RE = Sm, Gd, Pr, and Tb) were investigated by UV (325 nm) and visible (514, 633, and 785 nm) Raman spectroscopy, combined with UV-vis diffuse reflectance spectroscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectra techniques. It was found that the optical absorption property of samples, the wavelength of detecting laser line, and the inhomogeneous distribution of the dopants significantly affected the obtained surface information, namely, the peak intensity and shape at ca. 460 and 570 cm(-1), as well as the observed oxygen vacancy concentration (A(570)/A(460)). The UV laser line detected the surface information of RE-doped ceria and disclosed the presence of many oxygen vacancies in the samples. The visible laser lines penetrated into the inner layer of the Sm- or Gd-doped CeO(2) and reflected the whole information of samples because of their weak absorptions of the visible laser. However, the Pr- or Tb-doped CeO(2) absorbed visible light strongly; thus, the laser can only determine the outer surface information of the sample.     

Pt oxide and oxygen reduction at Pt(111) studied by surface X-ray diffraction

The influence of the oxygen reduction reaction on the oxidation of Pt(111) is studied by surface X-ray diffraction. The oxygen reduction reaction does not significantly influence the place-exchange process during the initial stages of oxidation and there is no change in the onset potential and kinetics.     

The nature of active sites in Pt promoted GaZSM-5 catalysts

Summary Activity and selectivity of Pt-promoted GaZSM-5 catalysts in the aromatization of ethane were studied. XRD indicated that high temperature treatment of the Pt promoted GaZSM-5 zeolites results in the formation of bimetallic GaPt clusters located on the inner surface of zeolites. Both experimental results and calculations suggest that the clusters containing Ga and Pt atoms stabilized in cationic positions are characterized by an increased activity and selectivity in the dehydrogenation of ethane.</o:p>     

Pt(hkl) surface charge and reactivity

1. Download : Download high-res image (191KB)
2. Download : Download full-size image

     

In situ characterization of Pt catalysts supported on ceria modified TiO2 for the WGS reaction: influence of ceria loading

This work analyzes the influence of cerium content (6-15 wt%) on a TiO(2) support over the structure and water gas shift (WGS) activity of Pt catalysts. The structural properties of these Pt/Ce-TiO(2) catalysts were characterized by XRD, TEM and XANES. Physicochemical characterization of the catalysts showed differences in the structure and dispersion of Ce entities on the support with Ce loading. For the samples with low ceria content (6 wt%), cerium is deposited on the support in the form of CeO(x) clusters in a highly dispersed state in close interaction with the Ti atoms. The formation of CeO(x) clusters at low Ce-loading on the support facilitates the dispersion of small particles of Pt and improves the reducibility of ceria component at low temperatures. The changes in platinum dispersion and support reducibility with Ce-loading on the TiO(2) support lead to significant differences in the WGS activity. Pt supported on the sample with lower Ce content (6 wt%) shows better activity than those corresponding to catalysts with higher Ce content (15 wt%). Activity measurements coupled with catalysts characterization suggest that the improvement in the reducibility of the support with lower Ce content was associated with the presence of CeO(x) clusters of high reducibility that improve the chemical activity of the oxide-metal interfaces at which the WGS reaction takes place.