Cross-linking of poly[1-(trimethylsilyl)-1-propyne] membranes using bis(aryl azides)

Cross-linkable poly[1-(trimethylsilyl)-1-propyne] (PTMSP) films were cast from toluene solutions containing PTMSP and either 4,4′-diazidobenzophenone or 4,4′-(hexafluoroisopropylidene)diphenyl azide. The composite films were clear and homogeneous and were cross-linked by UV irradiation at room temperature or thermal annealing at 180°C. Low levels of the bis(aryl azide) (1–5 wt %) were effective in rendering the films insoluble in toluene and THF, both good solvents for PTMSP. The process is simple and effective, and thus PTMSP can be readily converted to mechanically stable membranes with permeabilities and separation factors comparable or higher than those of poly(dimethylsiloxane). The films were characterized by measuring their density, their permeability toward O₂ and N₂, and their spectroscopic properties. Compared to PTMSP, films containing bis(aryl azide) cross-linkers had lower permeabilities and higher separation factors, consistent with a reduction in free volume. When the films were cross-linked photochemically, the permeabilities declined further and the separation factor increased. Films cross-linked thermally had permeabilities comparable to their PTMSP/azide precursors, and density and swelling measurements suggest that higher free volumes are obtained in thermally cross-linked films. All films stored in air suffered from a slow decline in permeability which may reflect slow surface oxidation of the films. When stored in vacuum, cross-linked films were stable and showed no loss in permeability, but the permeability of uncross-linked PTMSP films stored under the same conditions fell to 70% of their original value in 1 month. We attribute the permeability decline to densification accelerated by impurities and solvents. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 959–968, 1998     

Chromatographic properties of poly(1-trimethylsilyl-1-propyne)

Changes in the properties of the surface of poly(1-trimethylsilyl-1-propyne) (PTMSP) over time were studied by gas chromatography combined with adsorption under static conditions. It was ascertained that a reduction in the volume of micropores in a polymer results in the sorption-desorption processes occurring preferentially in mesopores. The formation of a more chemically uniform surface leads to a considerable increase in the symmetry of chromatographic peaks and the efficiency of a column. These changes allow us to broaden the range of compounds analyzed on columns with PTMSP.     

Effect of solvent nature on the optical anisotropy of poly(1-trimethylsilyl-1-propyne) molecules

The optical properties of poly(1-trimethylsilyl-1-propyne) solutions in solvents possessing optical anisotropy have been studied with dynamic birefringence measurements. In solvents characterized by refractive indexes different from the refractive index of a dry polymer, the optical form effect has been discovered. This effect is determined by the shape asymmetry of a macromolecular segment and its rigidity. Estimates showed that the length of the statistical segment, which characterizes the thermodynamic rigidity of the macromolecular chains under study, is 82 × 10^?8 cm. The shear optical coefficient for solutions of the test polymer in an anisotropic solvent is markedly higher than the corresponding value in an isotropic solvent. This difference is related to the orientation of anisotropic solvent molecules along the main chain of a macromolecule by their highest polarizability axis. Under the assumption that the orientational order of solvent molecules relative to chain macromolecules is independent of the thermodynamic rigidity of chain molecules, the size of the statistical segment of the macromolecules in question has been independently estimated as 98 × 10^?8 cm.     

Chromatographic properties and polarity evaluation of poly(1-trimethylsilyl-1-propyne) and poly(1-phenyl-1-propyne)

The chromatographic properties of poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-phenyl-1-propyne) (PPP) were studied by gas chromatography using packed columns. The selectivity and efficiency of columns packed with PTMSP and PPP were compared to the data obtained for columns with other known adsorbents and stationary phases. The McReynolds and Rohrschneider constants, on the basis of which the polarity of the new phases was evaluated, were calculated. The results of the investigation of chromatographic properties allow PTMSP to be brought in line with the polymeric adsorbents Porapak Q, Porapak QS, and Chromosorb 106, while PPP, with the methyphenylsilicon phases SE-52 and OV-3.     

Rheological properties of poly(1-trimethylsilyl-1-propyne) solutions

The phase state and rheological properties of poly(1-trimethylsilyl-1-propyne) solutions in toluene and cyclohexane are studied. Samples of poly(1-trimethylsilyl-1-propyne) have the same backbone structure (cis-trans configuration ratio) but different molecular masses. Phase diagrams of these systems are derived via optical interferometry. It is found that they have an upper critical mixing temperature (UCMT) whose value exceeds the boiling points of the individual solvents. The two solvents exhibit limited solubility with respect to the studied polymer, and this parameter decreases with an increase in the molecular mass of the polymer. In the transition from dilute to concentrated solutions, the pattern of the rheological behavior changes from Newtonian to pseudoplastic. The concentration dependences of the zero-shear-rate viscosity of the solutions are typical for flexible-chain polymers. The viscous behavior of the poly(1-trimethylsilyl-1-propyne)-solvent system can be described through a single generalized viscosity-concentration relationship if dimensionless reduced values that take into account the contribution of the molecular mass, the nature of the solvent, and the pattern of intermolecular interactions in the solutions are used as the argument and the function.     

Synthesis and properties of brominated poly(1-trimethylsilyl-1-propyne)

Russian Chemical Bulletin - A procedure of selective bromination of poly(1-trimethylsilyl-1-propyne) using N-bromosuccinimide as the brominating agent was developed. This method allows to obtain...     

Gas permeability and stability of poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) membranes

A significant reduction in the gas permeability of the poly(1-trimethylsilyl-1-propyne) (PMSP) membrane was investigated in terms of the membrane thickness and the storage environment. The effects of physical aging were observed with thinner membranes and under vacuum conditions compared with storage in air. The decrease in the permeability coefficient was dependent on the decrease in the hole saturation constant of Langmuir adsorption (C'_H), which is related to the volume of the microvoids. Physical aging in the PMSP membrane affected not only the glassy domain but also the rubbery one. To stabilize the permeability of the PMSP membrane, a poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) [poly(TMSP-co-PP)] membrane was prepared. Poly(TMSP-co-PP) has the same unit of poly(1-phenyl-1-propyne), which membrane has stable permeability. The poly(TMSP-co-PP) with less than 20 mol % PP content was estimated to be a random copolymer based on theoretical gas permeation analysis. In the poly(TMSP-co-PP) membrane, the relation between the PP content and C'_H was similar to the relation between the PP content and the gas permeability. The stability of the permeability was dependent on the PP content. The poly(TMSP-co-PP) membrane containing 10 mol % PP had both high permeability and good stability under some of the aging conditions performed in this work. © 1995 John Wiley & Sons, Inc.     

Chromatographic and adsorption properties of the mixed stationary phase poly(1-trimethylsilyl-1-propyne)/poly(1-phenyl-1-propyne)

Adsorption and chromatographic properties of the mixed stationary phase poly-(1-trimethylsilyl-1-propyne)/poly(1-phenyl-1-propyne) (PTMSP/PPP) composed as 97: 3 by weight have been investigated by methods of low-temperature nitrogen adsorption and gas chromatography on packed columns. The resultant phase has uniform mesoporous structure. The chromatographic properties of the mixed phase are significantly different from the properties of the original porous polymers PTMSP and PPP. The adsorbent obtained by modifying Chromosorb P NAW with a mixture of polymers provides the selective separation of chlorosubstituted, saturated, and aromatic hydrocarbons.     

Transport of organic vapors through poly(1-trimethylsilyl-1-propyne)

Poly(1-trimethylsilyl-1-propyne) [PTMSP], a high-free-volume glassy polymer, has the highest gas permeability of any known synthetic polymer. In contrast to conventional, low-free-volume, glassy polymers, PTMSP is more permeable to large, condensable organic vapors than to permanent gases. The organic-vapor/permanent-gas selectivity of PTMSP based on pure gas measurements is low. In organic-vapor/permanent-gas mixtures, however, the selectivity of PTMSP is much higher because the permeability of the permanent gas is reduced dramatically by the presence of the organic vapor. For example, in n-butane/methane mixtures, as little as 2 mol% n-butane (relative n-butane pressure 0.16) lowers the methane permeability 10-fold from the pure methane permeability. The result is that PTMSP shows a mixed-gas n-butane/methane selectivity of 30. This selectivity is the highest ever observed for this mixture and is completely unexpected for a glassy polymer. In addition, the gas mixture n-butane permeability of PTMSP is considerably higher than that of any known polymer, including polydimethylsiloxane, the most vapor-permeable rubber known. PTMSP also shows high mixed-gas selectivities and vapor permeabilities for the separation of chlorofluorocarbons from nitrogen. The unusual vapor permeation properties of PTMSP result from its very high free volume - more than 20% of the total volume of the material. The free volume elements appear to be connected, forming the equivalent of a finely microporous material. The large amount of condensable organic vapor sorbed into this finely porous structure causes partial blocking of the small free-volume elements, reducing the permeabilities of the noncondensable permanent gases from their pure gas values.     

Long-term permeation properties of poly(1-trimethylsilyl-1-propyne) membranes in hydrocarbon—Vapor environment

Poly(1-trimethylsilyl-1-propyne) (PTMSP), a high free-volume glassy di-substituted polyacetylene, has the highest gas permeabilities of all known polymers. The high gas permeabilities in PTMSP result from its very high excess free volume and connectivity of free volume elements. Permeability coefficients of permanent gases in PTMSP decrease dramatically over time due to loss of excess free volume. The effects of aging on gas permeability and selectivity of PTMSP membranes continuously exposed to a 2 mol % n-butane/98 mol % hydrogen mixture over a period of 47 days are reported. The permeation properties of PTMSP membranes are quite stable when the polymer is continuously exposed to a gas mixture containing a highly sorbing organic vapor such af n-butane. The n-butane/hydrogen selectivity was essentially constant for the 47-day test period at a value of 29, or 88% of the initial value of the as-cast film of 33. Condensable gases such as n-butane may serve as a “filler” in the nonequilibrium free volume of the polymer, thereby preserving the high level of excess free volume. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1483–1490, 1997     

Phase equilibrium and rheology of poly(1-trimethylsilyl-1-propyne) solutions

The phase equilibrium and rheological properties of poly(1-trimethylsilyl-1-propyne) solutions obtained with tantalum catalysts are studied. For three polymers with different molecular masses, phase diagrams are determined in a number of solvents. From these diagrams, the Hansen solubility parameters of poly(1-trimethylsilyl-1-propyne) are calculated by the method proposed in this work. Dilute solutions of poly(1-trimethylsilyl-1-propyne) behave as Newtonian liquids, whereas the viscosity of viscoelastic concentrated systems decreases as the shear rate grows. The molecular and rheological characteristics of studied poly(1-trimethylsilyl-1-propyne) samples are compared with the samples prepared with NbCl₅ catalysts. Poly(1-trimethylsilyl-1-propyne) obtained with a catalytic system involving tantalum pentachloride is characterized by high intrinsic viscosity and solution viscosity compared to poly(1-trimethylsilyl-1-propyne) prepared with niobium catalyst. The difference in properties is due to the dissimilar ratios of cis and trans units in the samples.     

Study of poly(1-trimethylsilyl-1-propyne) aging by gas chromatography

The possibilities of gas chromatography for determination of physicochemical properties of the surface are demonstrated. Changes in the surface properties of poly(1-trimethylsilyl-1-propyne) (PTMSP) with time were investigated. It was found that with the lapse of time the sorption-desorption processes proceed mainly in mesopores due to decreasing the polymer micropore volume. The formation of a chemically more uniform surface strongly increases the symmetry of chromatographic peaks and the column efficiency.     

Macrochain configuration, stucture of free volume and transport properties of poly(1-trimethylsilyl-1-propyne) and poly(1-trimethylgermyl-1-propyne)

The relationship between poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-trimethylgermyl-1-propyne) (PTMGP) microstructure, gas permeability and structure of free volume is reported. n-Butane/methane mixed-gas permeation properties of PTMSP and PTMGP membranes with different cis-/trans-composition have been investigated. The n-butane/methane selectivities for mixed gas are by an order higher than the selectivities calculated from pure gas measurements (the mixed-gas n-butane/methane selectivities are 20?C40 for PTMSP and 22?C35 for PTMGP). Gas permeability and n-butane/methane selectivity essentially differ in polymers with different cis-/trans-composition. Positron annihilation lifetime spectroscopy investigation of PTMSP and PTMGP with different microstructure has determined distinctions in total amount and structure of free volume, i.e. distribution of free volume elements. The correlation between total amount of free volume and gas transport parameters is established: PTMSP and PTMGP with bigger free volume exhibit higher n-butane permeability and mixed-gas n-butane/methane selectivity. Such behavior is discussed in relation to the submolecular structure of polymers with different microstructure and sorption of n-butane in polymers with different free volume.     

The effect of solvent nature upon the optical anisotropy of poly-(1-trimethylsilyl-1-propyne)

Optical properties of poly-(1-trimethylsilyl-1-propyne) in solvents with different refractive indices and optical anisotropies have been studied by the dynamic birefringence method. An optical shape-effect has been detected in solvents characterized by refractive indices n_s different from those of dry polymer n_k. It was revealed that this effect is an effect of the macromolecule segment shape; this allowed us to estimate thermodynamic rigidity of the molecular chains under study (A = 82 × 10⁻⁸ cm). It has been found that the optical shear coefficient of the studied polymers solutions in anisotropic solvents exceeds considerably the same parameter in an isotropic solvent. It has been shown that this difference is caused by the solvent anisotropic molecules orientation by the axis of maximal polarizability along the macromolecule backbone. The assumption that the solvent molecules orientation order with respect to chain molecules does not depend on the chain molecule thermodynamic rigidity allowed us to obtain independent estimate of the sizes of static segments of the macromolecules under study (98 × 10⁻⁸ cm).     

Crosslinking poly[1-(trimethylsilyl)-1-propyne] and its effect on physical stability

Poly[1-(trimethylsilyl)-1-propyne] (PTMSP) has been crosslinked using 3,3′-diazidodiphenylsulfone to improve its solvent resistance and physical stability. This study reports the influence of crosslinking on N₂, O₂ and CH₄ gas permeabilities and fractional free volume (FFV) as a function of time. Crosslinking PTMSP renders it insoluble even in excellent solvents for the uncrosslinked polymer. The gas permeability and FFV of uncrosslinked and crosslinked PTMSP decreased over time, so crosslinking PTMSP does not arrest physical aging. The addition of 10 wt.% polysiloxysilsesquioxanes (POSS) nanoparticles decreased the permeability of PTMSP by 55%, and the permeability and FFV values were stable over time for PTMSP films containing 10 wt.% POSS nanoparticles. The permeability of PTMSP at a given FFV was greater than that of other substituted polyacetylenes, polysulfones or polycarbonates, which is consistent with differences in the arrangement of free volume in these polymers, as probed by positron annihilation lifetime spectroscopy (PALS). Ellipsometry was used to characterize physical aging of thin (400 nm) uncrosslinked and crosslinked PTMSP films supported on silicon wafers. The ellipsometry results showed that crosslinking does not markedly slow physical aging of thin PTMSP films.     

Gas transport in TiO2 nanoparticle-filled poly(1-trimethylsilyl-1-propyne)

Titanium dioxide (TiO₂) nanoparticles were dispersed via solution processing in poly(1-trimethylsilyl-1-propyne) (PTMSP) to form nanocomposite films. Nanoparticle dispersion was investigated using atomic force microscopy and transmission electron microscopy. At low-particle loadings, nanoparticles were dispersed individually and in nanoscale aggregates. At high-particle loadings, some nanoparticles formed micron-sized aggregates. The gas transport and density exhibited a strong dependence on nanoparticle loading. At low-TiO₂ loadings, the composite density was similar to or slightly higher than that predicted by a two-phase additive model. However, at particle loadings exceeding approximately 7 nominal vol.%, the density was markedly lower than predicted, suggesting that the particles induced the creation of void space within the nanocomposite. For example, when the TiO₂ nominal volume fraction was 0.35, the polymer/particle composite density was 40% lower than expected based on a two-phase additive model for density. At low-nanoparticle loading, light gas permeability was lower than that of the unfilled polymer. At higher nanoparticle loadings, light gas permeability (i.e., CO₂, N₂, and CH₄) increased to more than four times higher than in unfilled PTMSP. At most, selectivity changed only slightly with particle loading.     

Pure hydrocarbon sorption properties of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and PTMSP/PPP blends

Propane and n-butane sorption in blends of poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-phenyl-1-propyne) (PPP) have been determined. Solubilities of propane and n-butane increased as the PTMSP content in the blends increased. This result is consistent with the higher free volume of PTMSP-rich blends and the better thermodynamic compatibility between PTMSP and these hydrocarbons. Propane and n-butane sorption isotherms were well described by the dual-mode model for sorption in glassy polymers. PTMSP/PPP blends are strongly phase-separated, heterogeneous materials. A noninteracting domain model developed for sorption in phase-separated glassy polymer blends suggests that sorption in the Henry's law regions (i.e., the equilibrium, dense phase of the blends) is consistent with the model. However, Langmuir capacity parameters in the blends are lower than predicted from the domain model, suggesting that the amount of nonequilibrium excess free volume associated with the Langmuir sites depends on blend composition. © 1996 John Wiley & Sons, Inc.     

Facilitated transport of molecular oxygen in cobaltporphyrin/poly(1-trimethylsilyl-1-propyne) membrane

The combination membrane of poly(1-trimethylsilyl-1-propyne) with enormously high permeability and poly(vinylimidazole)-bound porphinatocobalt with selective oxygenbinding ability was prepared. Oxygen transport through the membrane was facilitated in terms of oxygen transport via the latter domain as a fixed oxygen-carrier, and this oxygen permeability maintained for a month.     

Extraction of butanol from aqueous solutions by pervaporation through poly(1-trimethylsilyl-1-propyne)

Poly(1-trimethylsilyl-1-propyne) (PTMSP) was synthesized using a TaCl₅–Al(i-Bu)₃ catalysis system. Pervaporation and sorption of n-butanol–water mixtures were studied, and the peculiarities of water and butanol co-permeation are discussed. The strong dependence of water partial flux (with a minimum at 1 wt.% butanol in feed) on butanol concentration in feed was observed. S-shaped isotherms of butanol and total sorption were found for PTMSP in 0–1 wt.% concentration range. It appears that blocking of PTMSP nanopores by high sorbing organic molecules controls the pervaporation of butanol from dilute aqueous solutions. Data are discussed in regard with PTMSP morphology.     

Chemical modification of poly(vinyltrimethylsilane) and poly(1-trimethylsilyl-1-propyne) using highly reactive metallating systems

Poly(vinyltrimethylsilane) and poly(1-trimethylsilyl-1-propyne) are metallated using normal and secondary butyllithium chelate complexes with tetramethylethylenediamine and superbases based on complexes of normal and secondary butyllithium with potassium tert-pentoxide as metallating agents. Optimal conditions ensuring metallation of poly(vinyltrimethylsilane) and poly(1-trimethylsilyl-1-propyne) with a high yield without degradation of macrochains are determined. Poly(vinyltrimethylsilane) and poly(1-trimethylsilyl-1-propyne) are functionalized via reactions of metallated polymers with CO₂, trimethylsilyl chlorosulfone, diethyl disulfide, and ethylene oxide. COOH, SO₃H, OH, and thioester groups are introduced into poly(vinyltrimethylsilane), and SO₃H and COOH groups are incorporated into poly(1-trimethylsilyl-1-propyne). Upon introduction of carboxyl groups into poly(vinyltrimethylsilane), its hydrophilicity and permselectivity with respect to H₂O/N₂, H₂O/H₂, and H₂O/CH₄ pairs increase. The introduction of SO₃H groups into poly(1-trimethylsilyl-1-propyne) and poly(vinyltrimethylsilane) leads to the appearance of proton conductivity of these polymers.