聚丙烯酰胺—l—聚四氢呋喃（PAm—l—PTHF）两亲聚合物网络的合成

两亲聚合物网络（Ａｍｐｈｉｐｈｉｌｉｃｎｅｔｗｏｒｋ）是一类由亲水和疏水高分子链段通过共价键连接而成,具有既能在水中溶胀又能在有机溶剂中溶胀的独特性能的聚合物网络体系,其中亲水和疏水链段分别聚集并形成微观相分离的相态结构,且亲水和疏水链段分别保留了各自的化学和物理性质［１］。两亲网络的独特性质使得它日益受到聚合物科学家的关注［２,３］。然而基于合成技术等方面的原因,迄今为止已有文献报道的两亲聚合物网络种类十分有限,本文以具有良好柔性和生物相容性的聚四氢呋喃（ＰＴＨＦ）（Ｍｎ～２０００）为疏水链…     

智能性共聚物水凝胶P（AM—NaA）相转变的研究

本文用＾６０Ｃｏ－γ射线辐射合成了聚（丙烯酰胺－丙烯酸钠）Ｐ（ＡＭ－ＮａＡ）智能性共聚物水凝胶，并用ＦＴＩＲ对共聚物进行了表征。着重研究了水凝胶在丙酮－水介质中的溶胀和收缩速率、溶胀平衡时间及体积相转变特性。     

聚乙烯醇－g－聚丙烯酸膜用于渗透气化法分离乙醇－水的研究

合成了聚乙烯醇－ｇ－聚丙烯酸接枝聚合物（ＰＶＡ－ｇ－ＰＡＡ），分别用ＫＯＨ、ＮａＯＨ、ＬｉＣｌ的乙醇－水溶液处理ＰＶＡ－ｇ－ＰＡＡ膜。发现离子膜用于乙醇－水的渗透气化分离可以大幅度提高分离系数，特别是用ＫＯＨ处理，分离系数可达４００。     

温度及pH敏感聚（丙烯酸）／聚（N—异丙基丙烯酰胺）互穿聚合物网络水凝胶的...

合成聚（丙烯酸）／聚（Ｎ－异丙基丙烯酰胺）互穿聚合物网络（ＰＡＡｃ／ＰＮＩＰＡ ＩＰＮ）水凝胶，具有温度及ｐＨ双重敏感特性。这种水凝胶在弱碱性条件下的溶胀率远大于酸性条件下的溶胀率。在酸性条件下，随着温度上升，凝胶的溶胀率也随之逐渐上升；而在弱碱性条件下，温度低于聚（Ｎ－异丙基丙烯酰胺）（ＰＮＩＰＡ）的较低临界溶解温度（ＬＣＳＴ）时，溶胀率也随着温度的上升而上升，而温度达到ＬＣＳＴ时，凝胶的溶胀率     

主链含PEO链段的聚对苯乙炔类蓝色电致发光共聚物

采用Ｗｉｔｔｉｇ反应合成了一种分子主链上烷氧基取代刚性共轭聚对苯乙炔（ＰＰＶ）民柔性聚氧化乙烯（ＰＥＯ）链段交替排列的、可溶于氯仿与四氢呋喃等普通有机溶剂的新型结构的聚对苯乙炔类功能性发光共聚物ＥＯ－ＰＰＶ。采用ＦＴ－ＩＲ、＾１Ｈ－ＮＭＲ、ＤＳＣ、ＧＰＣ、元素分析等手段对共聚物进行了表征,并制备了结构为（Ａｌ）Ｃａ／ＥＯ－ＰＰＶ／ＩＴＯ的单层电致发光器件、器件的最大发光波长位于４７５ｎｍ（蓝光）。     

四氢呋喃开环均聚以及四氢呋喃和环硫氯丙烷共聚新催化体系

研究发现无水稀土氯化物 ５０％发烟硫酸体系是四氢呋喃（ＴＨＦ）均聚和四氢呋喃与环硫氯丙烷（ＣＭＴ）共聚合的优良新催化体系．考察了ＴＨＦ均聚反应特征，在合适条件下，ＴＨＦ聚合以６５％转化率制得粘均分子量达１０，０００～１５，０００的白色聚四氢呋喃（ＰＴＨＦ）固体．端羟基分析法测得聚合物的分子链两端均为羟基．考察了影响ＴＨＦ ＣＭＴ共聚合反应诸因素，如聚合温度和时间、两单体的比例等，制得数均分子量为１，０００左右的淡黄色粘性固体共聚物．     

1,3—戊二烯／苯乙烯阳离子共聚合反应

本文研究了以甲苯为溶剂,ＡｌＣｌ３和ＢＦ３·ＯＥｔ２为引发剂,１,３－戊二烯（ＰＤ）与苯乙烯（Ｓｔ）的阳离子共聚合反应,并用红外光谱测定聚合物的微观结构。由共聚单体ＰＤ和Ｓｔ加入顺序的不同可生成无规共聚物Ｐ（ＰＤ－ｃｏ－Ｓｔ）和接枝共聚物Ｐ（ＰＤ－ｇ－Ｓｔ）和Ｐ（Ｓｔ－ｇ－ＰＤ）。无论是由ＡｌＣｌ３引发聚合反应,还是由ＢＦ３·ＯＥｔ２引发聚合反应,Ｓｔ上的碳阳离子的活性都高于ＰＤ上碳阳离子的活性。由ＡｌＣｌ３首先引发ＰＤ进行聚合反应,结束后再引入Ｓｔ时,聚合体系不能引发Ｓｔ聚合反应;相反ＡｌＣｌ３首先引发Ｓｔ聚合后的体系能继续引发ＰＤ的聚合反应。ＢＦ３·ＯＥｔ２无论先引发Ｓｔ或是ＰＤ,都能在聚合反应完成后接着引发另一单体而生成接枝共聚物Ｐ（ＰＤ－ｇ－Ｓｔ）和Ｐ（Ｓｔ－ｇ－ＰＤ）。二苯醚与烯丙基氯的加入,提高了碳阳离子的稳定性,增加了聚合物的分子量,但降低了碳阳离子的活性,使得聚合反应的产率降低,同时对Ｓｔ和ＰＤ碳阳离子的活性次序无明显影响     

新型高效催化剂乙烯／1—丁烯气相齐聚和共聚制摆弹性体？…

用新型催化体系ＴｉＣｌ４,Ｔｉ（ＯＢｕ）４／ＭｇＣｌ２,ＳｉＯ２和ＺｎＣｌ２／醇／ＡＩＲ３催化乙烯与１－丁烯气均聚及共聚,制得两种共聚物弹性体,发现新型催化剂体系具有独特的齐聚和原位共聚性能,采用＾１３ＣＮＭＲ测定了共聚物链序列分布结构,观察到共聚单体在聚合物链中分布不均匀,存在较长的乙烯链段和较多的１－丁烯嵌段,产物ＤＳＣ谱图表现出复杂的结构熔融行为,存在多种结晶形态,出现熔融肩峰及双峰,怀通常     

嵌段—接枝共聚物SPEG与PS（OH）之间的氢键络合导致胶束化的研究

利用原子转移自由基聚合反应合成了以聚苯乙烯－ｂ－聚（乙烯－ｃｏ－丙烯）（ＳＥＰ）为主链、无规分布且数目可控的聚甲基丙烯酸乙酯（ＰＥＭＡ）为支链的嵌段接枝共聚物ＳＰＥＧ,发现在甲苯中因支链ＰＥＭＡ与聚（苯乙烯－ｃｏ－对六氟丙基－α－甲基苯乙烯）「简称ＰＳ（ＯＨ）」的氢键络合作用和ＥＰ嵌段的溶解作用导致了聚集体的胶束化,研究了胶束的尺寸及其分布对ＰＳ（ＯＨ）中羟基含量和共混物组成的依赖性。     

聚（丙烯酰胺—丙烯酸）／聚（丙烯酰胺—二甲基二烯丙基氯化铵）聚电解质复…

通过动态光散射、粘度和透光率测定，研究了聚（丙烯酰胺－丙烯酸）［Ｐ（ＡＭ－ＡＡ）］／聚（丙烯酰胺－二甲基二烯丙基氯化铵）［Ｐ（ＡＭ－ＤＭＤＡＡＣ）］聚电解质复合溶液的结构和性能。结果表明，Ｐ（ＡＭ－ＡＡ）与Ｐ（ＡＭ－ＤＭＤＡＡＣ）复合比、溶液浓度和氯化钠用量影响溶液中复合物的构象和流体力学半径。Ｐ（ＡＭ－ＡＡ）与Ｐ（ＡＭ－ＤＭＤＡＡＣ）分子链间适度的库仑相互作用，可形成均相Ｐ（ＡＭ－ＡＡ）／Ｐ（Ａ     

Polytetrahydrofuran amphiphilic networks. IV. Swelling behavior of poly(acrylic acid)‐l‐polytetrahydrofuran and poly(methacrylic acid)‐l‐polytetrahydrofuran networks

Poly(acrylic acid)‐l‐polytetrahydrofuran (PAA‐l‐PTHF) and poly(methacrylic acid)‐l‐polytetrahydrofuran (PMAA‐l‐PTHF) networks were synthesized by the free‐radical copolymerization of hydrophobic polytetrahydrofuran diacrylates with hydrophilic acrylic acid and methacrylic acid. Their swelling behavior was studied. Both PAA‐l‐PTHF and PMAA‐l‐PTHF networks had four solubility parameters, which indicated that they exhibited not only the properties of both hydrophobic and hydrophilic segments but also the combined properties of these two segments. The swell of these two series of networks was composition‐dependent in organic solvents and water. The relationship between the equilibrium swelling ratio (SR_e) in nonpolar solvents and the composition of the networks [the weight fraction of the PTHF segment (PTHF%)] may be expressed with a linear equation: SR_e = A × PTHF% + B. A and B are parameters that relate to the interaction of hydrophilic and hydrophobic segments with nonpolar solvents and to the properties of the networks, respectively. Because of the presence of a ? COOH group, these two network series were pH‐sensitive when the content of hydrophilic segments was higher. The pH sensitivity of networks could be controlled not only by the composition of the networks but also by the hydrophobic degree of the hydrophilic segments. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1784–1790, 2001     

Polytetrahydrofuran amphiphilic networks. I. Synthesis and characterization of polytetrahydrofuran acrylate ditelechelic and polyacrylamide‐l‐polytetrahydrofuran networks

A series of novel amphiphilic polyacrylamide‐l‐polytetrahydrofuran (PAm‐l‐PTHF) networks were prepared by the free‐radical copolymerization of hydrophobic ditelechelic polytetrahydrofuran acrylate (PTHFDA) with hydrophilic acrylamide. PTHFDA was synthesized by acrylation of the corresponding hydroxycapped PTHF with acrylic acid in cyclohexane. After acrylation, there was no significant difference in the molecular weights and molecular weight distributions between the original PTHF and the resulting PTHFDA. Network structures and compositions were characterized by elemental analyses, Fourier transform infrared, differential scanning calorimetry, scanning electron microscopy, and swelling data. The networks can swell both in organic solvents and in water, which indicates that they are amphiphilic. The swelling of the networks in different solvents is composition‐dependent. According to differential scanning calorimetry, scanning electron microscopy, and swelling tests, the networks have a microphase‐separated and bicontinuous morphology. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3812–3820, 2000     

Synthesis strategies and properties of smart amphiphilic networks

This paper briefly surveys recent developments in the field of amphiphilic networks (APN) which are a new class of crosslinked polymer systems consisting of covalently bonded hydrophobic and hydrophilic chain segments. The covalent bonds between immiscible hydrophobic and hydrophilic polymer chains prevent demixing and yield polymer networks with unique structure and properties. Telechelic macromonomers provide the basis for the first generation of APNs obtained by copolymerization of the macromonomer with selected low molecular weight monomers. Synthesis of a variety of APNs using methacrylate-telechelic polyisobutylene (PIB) macromonomers prepared by living carbocationic polymerization (LCCP) and quantitative chain end derivatization is reviewed. The second generation of PIB-based amphiphilic networks is prepared by crosslinking of well-defined hydroxy-telechelic PIB and partially deprotected silylated poly(2-hydroxyethyl methacrylate) (PHEMA) precursor chains. Other opportunities providing better structural control of APNs by crosslinking of functional amphiphilic block copolymers (or precursors) obtained by combining living carbocationic and anionic polymerizations are outlined as well. Properties of APNs, such as control of swellability by composition, pH-response of swelling, fast surface structure reorganization by contacting with solvent, morphology, sustained release of drugs and bio- and blood compatibility, are also summarized.     

Microphase‐separated structure of telechelic urethane acrylate anionomers and their network in various solvents

Telechelic urethane acrylate anionomer (UAA) chain showed less viscosity and polyelectrolyte behavior in water than dimethyl acetamide (DMAc) because of hydrophobic aggregation. UAA networks prepared in different solvents (water and DMAc) exhibited very different swelling behaviors in the same swelling medium, which can be interpreted as due to the very different microstructures formed in the solvents. UAA networks prepared with water (UAHG networks) had microphase‐separated hydrophilic and hydrophobic domains, whereas UAA networks synthesized with DMAc (UADG networks) had relatively homogeneous network structures. The mechanical property of the UAHG and UADG networks, measured with a dynamic mechanical analyzer, was also very sensitive to the solvent type used during the crosslinking reaction. UAHG networks with a microphase‐separated structure had a higher modulus than UADG networks. The results of the mechanical property measurements showed that water was a much better solvent for the hydrophilic hard segments of UAA chain than DMAc, even though DMAc dissolved both hydrophilic and hydrophobic segments of UAA chain. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2081–2095, 2000     

含聚1,3-二氧戊环链段可降解pH敏感性水凝胶的合成与表征

制备了含聚 1,3 二氧戊环链段具有pH敏感性的可解体聚合物凝胶网络 ,网络可在水中及有机溶剂中溶胀 ,且由聚 1,3 二氧戊环构成的水凝胶成分可以在酸性介质中降解 ,使网络解体 .利用红外光谱、色 质联谱等分析手段对聚合物凝胶网络进行了表征 .通过对降解产物的分析 ,一方面证实了降解现象的存在 ,另一方面证实了聚合反应机理     

Amphiphilic micro- and nanogels: Combining properties from internal hydrogel networks,solid particles,and micellar aggregates

Polymeric micro- and nanogels are defined by their water-swollen hydrophilic networks that can often impart outstanding biocompatibility and high-colloidal stability. Unfortunately, this highly hydrophilic nature limits their potential in areas where hydrophobic or amphiphilic interactions are required, for example, the delivery of hydrophobic cargoes or tailored interactions with amphipathic (bio-)surfaces. To overcome this limitation, amphiphilic micro−/nanogels are emerging as new colloidal materials that combine properties from hydrogel networks with hydrophobic segments, known from solid hydrophobic polymer particles or micellar cores. The ability to accurately adjust the balance of hydrophobic and hydrophilic components in such amphiphilic colloidal systems enables new tailored properties. This opens up new applications ranging from the controlled and sustained delivery of hydrophobic drugs, over carriers for catalytic moieties, to their assembly at hydrophilic/hydrophobic interfaces, for example, as advanced stabilizers in Pickering emulsions. While promising, the synthetic realization of such amphiphilic materials remains challenging since hydrophobic and hydrophilic moieties need to be combined in a single colloidal system. As a result, adjusting the micro−/nanogel amphiphilicity often changes the colloidal features too. To overcome these limitations, various strategies have been reported. The aim of this review is to give a brief overview of important synthetic tools, considering both advantages and disadvantages, thus critically evaluating their potential in different research fields.     

Dispersing behavior of recycled rubber particles

The hydrophobic nature of recycled rubber particles presently limits their use only in non-aqueous media. Recycled rubber particles were chemically modified by preparation of amphiphilic semi-interpenetrating polymer networks using poly(acrylic acid) as the hydrophilic polymer. The resulting composite particles are water dispersible and suitable for various aqueous media applications.     

Amphiphilic Networks. I. Network Synthesis by Copolymerization of Methacryloyl-Capped Polyisobutylene with 2-(Dimethylamino) Ethyl Methacrylate and Characterization of The Networks

New amphiphilic networks have been synthesized by free-radical co-polymerization of hydrophobic methacryloyl-capped polyisobutylenes (MA-PIB-MA) with hydrophilic 2-(dimethylamino)ethyl methacrylate. Two MA-PIB-MAs have been prepared with M_n = 4920 and 10 200, and two series of networks were prepared with MA-PIB-MA contents between 48 and 71.5%. Variation of the molecular weight of MA-PIB-MA and its concentration in the network allows for a wide range of mechanical properties and swellability in hydrophilic and hydrophobic solvents. Differential scanning calorimetry shows the existence of two glass transitions in these networks and thus indicates a phase-separated domain structure. Tensile strengths and elongations were dependent on MA-PIB-MA contents varying from 57.7 to 39.8 kg/cm² and from 168 to 200%, respectively, with increasing MA-PIB-MA content. Solvent swelling of the networks ranged from 170 to 20% in water and from 40 to 170% in n-heptane with increasing MA-PIB-MA contents.     

聚(辛二酸-四甘醇酯)的合成及其微相分离结构的研究

通过熔融缩聚合成了一种新型的两亲性聚酯——聚(辛二酸-四甘醇酯)(PTEGSub),利用GPC,NMR,FTIR,TG,DSC等手段对聚合物的结构进行了表征.研究发现,在25℃时,PTEGSub在水中可以形成胶束,粒径主要集中在20～120nm之间,其临界胶束浓度(CMC)随分子量的升高而降低.通过TEM观察了在选择性溶剂中的胶束形态.利用AFM研究了PTEGSub的微相分离,发现聚合物膜中存在有球状的相分离结构.     

Synthesis and degradation of intelligent hydrogels containing polyacetal segments

Intelligent hydrogels were first obtained by copolymerization of telechelic poly(1,3-dioxolane) (pDXL) with acrylic acid, acrylamide, N-isopropylacrylamide respectively. The synthesis and characterization of the networks were discussed. The swelling behavior of the hydrogel was dependent on the solubility parameter of the solvents and hydrogels. The networks containing polyacetal segments (pDXL) can degrade by acid in different solvents. DXL and few other cycle molecules measured by GC-MS analysis were formed after degradation. According to the degradation products, the polymerization mechanism can be testified.