Stability constants of some metal cation complexes of tetraphenyl <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylcalix[4]arene tetraketone in nitrobenzene saturated with water

Abstract  From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium taking place in the two-phase water–nitrobenzene system (M²⁺ = Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, UO₂ ²⁺, Mn²⁺, Co²⁺, Ni²⁺; 1 = tetraphenyl p-tert-butylcalix[4]arene tetraketone; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Further, the stability constants of the 1 · M²⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the cation order Ba²⁺, Mn²⁺ < Co²⁺ < Cu²⁺, Ni²⁺ < Zn²⁺, Cd²⁺, UO₂ ²⁺ < Ca²⁺ < Pb²⁺. Graphical abstract        

Electrochemical study of the thermodynamics and kinetics of hydrophilic ion transfers across water | <Emphasis Type="Italic">n</Emphasis>-octanol interface

Thermodynamics and kinetics of hydrophilic ion transfers across water|n-octanol (W|OCT) interface have been electrochemically studied by means of novel three-phase and thin-film electrodes. Three-phase electrodes used for thermodynamics measurements comprise edge plane pyrolytic graphite, the surface of which was partly modified with an ultrathin film of OCT, containing hydrophobic lutetium bis(tetra-tert-butylphthalocyaninato) (Lu[tBu₄Pc]₂) as a redox probe. The transfers of anions and cations from W to OCT were electrochemically driven by reversible redox transformations of Lu[tBu₄Pc]₂ to chemically stable lipophilic monovalent cation and anion , respectively. Upon reduction of Lu[tBu₄Pc]₂, the transfers of alkali metal cations from W to OCT have been studied for the first time, enabling estimation of their Gibbs transfer energies. For kinetic measurements, a thin-film electrode configuration has been used, consisting of the same electrode covered completely with a thin layer of OCT that contained the redox probe and a suitable electrolyte. Combining the fast and sensitive square-wave voltammetry with thin-film electrodes, the kinetics of , , and Cl⁻ transfers have been estimated. Dedicated to Professor Dr. Yakov I. Tur’yan on the occasion of his 85th birthday.     

Mechanism of the electroreduction of Ni (II) ions on mercury electrodes catalyzed by pyridine and its derivatives: nicotinamide, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylnicotinamide and nicotine: concept of parallel heterogeneous catalytic reactions

The theory of the polarographic catalytic currents (mechanism CE) has been developed for the system: Ni²⁺-L-X^p− where L: pyridine (Py), nicotinamide (NA), N,N-diethylnicotinamide (DEN), nicotine (NC) and X^p−: NO⁻ ₃, AcO⁻, HPO²⁻ ₄ . The theory is based on the kinetic parallel heterogeneous catalytic reactions:

Binuclear cobalt(II/II) and cobalt(II/III) chelates with O<Subscript>2</Subscript>N<Subscript>2</Subscript> ligands: synthesis,structure and magnetic studies

Abstract  The title complexes and have been synthesized in excellent yields by reacting Co(OAc)₂·4H₂O with H₂L¹ and H₂L², respectively, in acetonitrile solution. Here, [L¹]²⁻ and [L²]²⁻ are the deprotonated forms of N,N-bis(2-hydroxybenzyl)-N′,N′-dimethylethylenediamine and N,N-bis(2-hydroxybenzyl)-2-picolylamine, respectively. The crystal structures of and were determined by x-ray crystallography. In , each cobalt atom has distorted trigonal bipyramid geometry, while in , each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic interaction in . The magnetic characterization for is in agreement with the presence of Co(II) and Co(III) centers. Graphical Abstract  The title complexes and have been synthesized in excellent yields by reacting Co(OAc)₂·4H₂O with dianionic N₂O₂ coordinating ligands. In complex 1, each cobalt atom has distorted trigonal bipyramid geometry, while in complex 2, each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic interaction in complex 1. The magnetic characterization for complex 2 is in agreement with the presence of Co(II) and Co(III) centers. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Benchmarking and validating algorithms that estimate p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> values of drugs based on their molecular structures

The REGDIA regression diagnostics algorithm in S-Plus is introduced in order to examine the accuracy of pK _a predictions made with four updated programs: PALLAS, MARVIN, ACD/pKa and SPARC. This report reviews the current status of computational tools for predicting the pK _a values of organic drug-like compounds. Outlier predicted pK _a values correspond to molecules that are poorly characterized by the pK _a prediction program concerned. The statistical detection of outliers can fail because of masking and swamping effects. The Williams graph was selected to give the most reliable detection of outliers. Six statistical characteristics (F _exp, R ², , MEP, AIC, and s(e) in pK _a units) of the results obtained when four selected pK _a prediction algorithms were applied to three datasets were examined. The highest values of F _exp, R ², , the lowest values of MEP and s(e), and the most negative AIC were found using the ACD/pK _a algorithm for pK _a prediction, so this algorithm achieves the best predictive power and the most accurate results. The proposed accuracy test performed by the REGDIA program can also be applied to test the accuracy of other predicted values, such as log P, log D, aqueous solubility or certain physicochemical properties of drug molecules.     

On the spectral radius of graphs with connectivity at most <Emphasis Type="Italic">k</Emphasis>

In this paper, we study the spectral radius of graphs of order n with κ(G) ≤ k. We show that among those graphs, the maximal spectral radius is obtained uniquely at , which is the graph obtained by joining k edges from k vertices of K _n-1 to an isolated vertex. We also show that the spectral radius of will be very close to n − 2 for a fixed k and a sufficiently large n.     

Kinetics and Equilibria for Complex Formation between Palladium(II) and Chloroacetate

Kinetics and equilibria for the formation of a 1:1 complex between palladium(II) and chloroacetate were studied by spectrophotometric measurements in 1.00 mol HClO₄ at 298.2 K. The equilibrium constant, K, of the reaction

Solvent extraction of calcium and strontium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and diphenyl-<Emphasis Type="Italic">N</Emphasis>-butylcarbamoylmethyl phosphine oxide

Extraction of microamounts of calcium and strontium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide (DPBCMPO, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, \( {\text{HL}}_{2}^{ + } \), \( {\text{ML}}_{2}^{2 + } \), \( {\text{ML}}_{3}^{2 + } \) and \( {\text{ML}}_{4}^{2 + } \) (M²⁺ = Ca²⁺, Sr²⁺) are extracted into the organic phase. The values of extraction and stability constants of the cationic complexes in nitrobenzene saturated with water have been determined. In the considered nitrobenzene medium, it was found that the stability of the \( {\text{SrL}}_{2,{\text{org}}}^{2 + } \) complex is somewhat higher than that of species \( {\text{CaL}}_{2,{\text{org}}}^{2 + } \), while the stability constants of the remaining strontium complexes \( {\text{SrL}}_{3,{\text{org}}}^{2 + } \) and \( {\text{SrL}}_{4,{\text{org}}}^{2 + } \) are smaller than those of the corresponding complex species \( {\text{CaL}}_{n}^{2 + } \) (n = 3, 4).     

Synergistic extraction of some univalent cations into nitrobenzene by using sodium dicarbollylcobaltate and hexaethyl <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylcalix[6]arene hexaacetate

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + NaL⁺ (nb) ⇔ ML⁺ (nb) + Na⁺ (aq) taking place in the two-phase water–nitrobenzene system (M⁺ = H₃O⁺, \textNH₄⁺ {\text{NH}}_{4}{}^{+} , Ag⁺, Tl⁺; L = hexaethyl p-tert-butylcalix[6]arene hexaacetate; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Furthermore, the stability constants of the ML⁺ complexes in nitrobenzene saturated with water were calculated; they were found to increase in the following order: \textAg ⁺   <  NH₄ ⁺   <  \textH ₃ \textO ⁺   <  \textNa ⁺   <  \textTl ⁺ . {\text{Ag}}^{ + } \, < \,\hbox{NH}_{4}{}^{ + } \, < \,{\text{H}}_{ 3} {\text{O}}^{ + } \, < \,{\text{Na}}^{ + } \, < \,{\text{Tl}}^{ + }.     

Kinetic and mechanistic studies on the substitution of aqua ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bypyridyl)-ruthenium(II) ion by vic-dioximes

Kinetics of aqua ligand substitution from cis-[Ru(bpy)₂(H₂O)₂]²⁺ by three vicinal dioximes, namely dimethylglyoxime (L¹H), 1,2-cyclohexane dionedioxime (L²H) and α-furil dioxime (L³H) have been studied spectrophotometrically in the 45–60 °C temperature range. The rate constants increase with increasing dioxime concentration and approach a limiting condition. We propose the following rate law for the reaction in the 3.5–5.5 pH range: where k ₂ is the interchange rate constant from outer sphere to inner sphere complex and K _E is the outer sphere association equilibrium constant. Activation parameters were calculated from the Eyring plots for all three systems: ΔH ^≠ = 59.2 ± 8.8, 63.1 ± 6.8 and 69.7 ± 8.5 kJ mol⁻¹, ΔS ^≠ = −122 ± 27, −117 ± 21 and −99 ± 26 J K⁻¹ mol⁻¹ for L¹H, L²H and L³H, respectively. An associative interchange mechanism is proposed for the substitution process. Thermodynamic parameters calculated from the temperature dependence of the outer sphere association equilibrium constants give negative ΔG ⁰ values for all the systems studied at all the temperatures (ΔH ⁰ = 30.05 ± 2.5, 18.9 ± 1.1 and 11.8 ± 0.2 kJ mol⁻¹; ΔS ⁰ = 123 ± 8, 94 ± 3 and 74 ± 1 J K⁻¹ mol⁻¹ for L¹H, L²H and L³H, respectively), which also support our proposition.     

Kinetics and mechanism of oxidation of aquaethylenediaminetetraacetatocobaltate(II) by <Emphasis Type="Italic">N</Emphasis>-bromosuccinimide in aqueous acidic solution

The oxidation of aquaethylenediaminetetraacetatocobaltate(II) [Co(EDTA)(H₂O)]⁻² by N-bromosuccinimide (NBS) in aqueous solution has been studied spectrophotometrically over the pH 6.10–7.02 range at 25 °C. The reaction is first-order with respect to complex and the oxidant, and it obeys the following rate law:

Binding of nontarget microorganisms from food washes to anti-<Emphasis Type="Italic">Salmonella</Emphasis> and anti-<Emphasis Type="Italic">E. coli</Emphasis> O157 immunomagnetic beads: minimizing the errors of random sampling in extreme dilute systems

For most applications, 3–5 observations, or samplings (n), are utilized to estimate total aerobic plate count in an average population (μ) that is greater than about 50 cells, or colony forming units (CFU), per sampled volume. We have chosen to utilize a 6 × 6 drop plate method for bacterial colony selection because it offers the means to rapidly perform all requisite dilutions in a 96-well format and plate these dilutions on solid media using minimal materials. Besides traditional quantitative purposes, we also need to select colonies which are well-separated from each other for the purpose of bacterial identification. To achieve this goal using the drop plate format requires the utilization of very dilute solutions (μ < 10 CFUs per sampled drop). At such low CFU densities the sampling error becomes problematic. To address this issue we produced both observed and computer-generated colony count data and divided a large sample of individual counts randomly into N subsamples each with n = 2–24 observations (N × n = 360). From these data we calculated the average total mean-normalized (, n = 360) deviation of the total standard deviation (s _tot) from each jth subsample’s estimate (s _j ), which we call Δ. When either observed or computer-generated Δ values were analyzed as a function of , a set of relationships () were generated which appeared to converge at an n of about 18 observations. This finding was verified analytically at even lower CFU concentrations (). Additional experiments using the drop plate format and n = 18 samplings were performed on food samples along with most probable number (MPN) analyses and it was found that the two enumeration methods did not differ significantly. Any reference to a particular brand or company name does not constitute an endorsement of it by the U.S. Department of Agriculture over other similar brands or companies that are not mentioned.     

Densities and Volumetric Properties of Binary Mixtures of Formamide with 1-Butanol, 2-Butanol, 1,3-Butanediol and 1,4-Butanediol at Temperatures between 293.15 and 318.15 K

The densities of binary mixtures of formamide (FA) with 1-butanol, 2-butanol, 1,3-butanediol, and 1,4-butanediol, including those of the pure liquids, over the entire composition range were measured at temperatures (293.15, 298.15, 303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. From the experimental data, the excess molar volume, V _m ^E, partial molar volumes, and , at infinite dilution, and excess partial molar volumes, and , at infinite dilution were calculated. The variation of these parameters with composition and temperature of the mixtures are discussed in terms of molecular interactions in these mixtures. The partial molar expansivities, and , at infinite dilution and excess partial molar expansivities, and , at infinite dilution were also calculated. The V _m ^E values were found to be positive for all the mixtures at each temperature studied, except for FA + 1-butanol which exhibits a sigmoid trend wherein V _m ^E values change sign from positive to negative as the concentration of FA in the mixture is increased. The V _m ^E values for these mixtures follow the order: 1-butanol < 2-butanol < 1,3-butanediol < 1,4-butanediol. It is observed that the V _m ^E values depend upon the number and position of hydroxyl groups in these alkanol molecules.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.     

Catenated Gallium Compounds Supported by a<Emphasis Type="Italic"> Tris</Emphasis>(pyrazolyl)hydroborato Ligand

[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]M (M = K, Tl) reacts with “GaI” to give a series of compounds that feature Ga–Ga bonds, namely [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→GaI₃, [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]GaGaI₂GaI₂( \textHpz^\textMe₂ {\text{Hpz}}^{{{\text{Me}}_{2} }} ) and [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga(GaI₂)₂Ga[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ], in addition to the cationic, mononuclear Ga(III) complex {[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]₂Ga}⁺. Likewise, [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]M (M = K, Tl) reacts with (HGaCl₂) ₂ and Ga[GaCl₄] to give [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→GaCl₃, {[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]₂Ga}[GaCl₄], and {[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]GaGa[ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]}[GaCl₄]₂. The adduct [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→B(C₆F₅)₃ may be obtained via treatment of [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]K with “GaI” followed by addition of B(C₆F₅)₃. Comparison of the deviation from planarity of the GaY₃ ligands in [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→GaY₃ (Y = Cl, I) and [ \textTm^{\textBu\textt} {\text{Tm}}^{{{\text{Bu}}^{\text{t}} }} ]Ga→GaY₃, as evaluated by the sum of the Y–Ga–Y bond angles, Σ(Y–Ga–Y), indicates that the [ \textTm^{\textBu\textt} {\text{Tm}}^{{{\text{Bu}}^{\text{t}} }} ]Ga moiety is a marginally better donor than [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga. In contrast, the displacement from planarity for the B(C₆F₅)₃ ligand of [ \textTp^\textMe₂ {\text{Tp}}^{{{\text{Me}}_{2} }} ]Ga→B(C₆F₅)₃ is greater than that of [ \textTm^{\textBu\textt} {\text{Tm}}^{{{\text{Bu}}^{\text{t}} }} ]Ga→B(C₆F₅)₃, an observation that is interpreted in terms of interligand steric interactions in the former complex compressing the C–B–C bond angles.     

Outliers detection in the statistical accuracy test of a p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> prediction

The regression diagnostics algorithm REGDIA in S-Plus is introduced to examine the accuracy of pK _a predicted with four programs: PALLAS, MARVIN, PERRIN and SYBYL. On basis of a statistical analysis of residuals, outlier diagnostics are proposed. Residual analysis of the ADSTAT program is based on examining goodness-of-fit via graphical diagnostics of 15 exploratory data analysis plots, such as bar plots, box-and-whisker plots, dot plots, midsum plots, symmetry plots, kurtosis plots, differential quantile plots, quantile-box plots, frequency polygons, histograms, quantile plots, quantile-quantile plots, rankit plots, scatter plots, and autocorrelation plots. Outliers in pK _a relate to molecules which are poorly characterized by the considered pK _a program. Of the seven most efficient diagnostic plots (the Williams graph, Graph of predicted residuals, Pregibon graph, Gray L–R graph, Index graph of Atkinson measure, Index graph of diagonal elements of the hat matrix and Rankit Q–Q graph of jackknife residuals) the Williams graph was selected to give the most reliable detection of outliers. The six statistical characteristics, F_exp,R²,R_P²,MEP,AIC{F_{\rm exp},R^{2},R_{\rm P}^{2},{\it MEP},{\it AIC}}, and s in pK _a units, successfully examine the specimen of 25 acids and bases of a Perrin’s data set classifying four pK _a prediction algorithms. The highest values F_exp,R²,R_P²{F_{\rm exp},R^{2},R_{\rm P}^{2}} and the lowest value of MEP and s and the most negative AIC have been found for PERRIN algorithm of pK _a prediction so this algorithm achieves the best predictive power and the most accurate results. The proposed accuracy test of the REGDIA program can also be extended to test other predicted values, as log P, log D, aqueous solubility or some physicochemical properties.     

Studies on electron transfer reactions: reduction of heteropoly 10-tungstodivanadophosphate by <Emphasis Type="SmallCaps">l</Emphasis>-cysteine in aqueous acid medium

l-cysteine undergoes facile electron transfer with heteropoly 10-tungstodivanadophosphate, [ \textPV^\textV \textV^\textV \textW _{1 0} \textO _{4 0} ]^{5 -} , \left[ {{\text{PV}}^{\text{V}} {\text{V}}^{\text{V}} {\text{W}}_{ 1 0} {\text{O}}_{ 4 0} } \right]^{5 - } , at ambient temperature in aqueous acid medium. The stoichiometric ratio of [cysteine]/[oxidant] is 2.0. The products of the reaction are cystine and two electron-reduced heteropoly blue, [PV^IVV^IVW₁₀O₄₀]⁷⁻. The rates of the electron transfer reaction were measured spectrophotometrically in acetate–acetic acid buffers at 25 °C. The orders of the reaction with respect to both [cysteine] and [oxidant] are unity, and the reaction exhibits simple second-order kinetics at constant pH. The pH-rate profile indicates the participation of deprotonated cysteine in the reaction. The reaction proceeds through an outer-sphere mechanism. For the dianion ⁻SCH₂CH(NH₃ ⁺)COO⁻, the rate constant for the cross electron transfer reaction is 96 M⁻¹s⁻¹ at 25 °C. The self-exchange rate constant for the ^- \textSCH₂ \textCH( \textNH₃ ⁺ )\textCOO ^- \mathord

Kinetics and mechanism of <Emphasis Type="Italic">L</Emphasis>-isoleucine oxidation by alkaline diperiodatoargentate(III)

The oxidation of L-isoleucine by alkaline diperiodatoargentate(III) (DPA) at 298 K and a constant ionic strength of 0.80 mol dm⁻³ was studied spectrophotometrically. The stoichiometry is [L-isoleucine]: [DPA] = 1:2. The reaction is first order in [DPA] and has less than unit order in both [L-isoleucine] and [alkali] and retarding effect in The oxidation reaction in alkaline medium has been shown to proceed via a L-isoleucine–DPA complex, which further reacts with one molecule of DPA in a rate determining step followed by other fast steps to give the products. Spot test and IR were used to identify the main products. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to the slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined. The probable active species of oxidant have been identified. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Mechanistic investigations on the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-valine by diperiodatocuprate(III) in aqueous alkaline medium: a kinetic model

The oxidation of l-valine (l-val) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium at a constant ionic strength of 3.0 × 10⁻³ mol dm⁻³ was studied spectrophotometrically at 298 K and follows the rate law;

Experimental Research of OH and N<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> Spatially Resolved Spectra in a Needle-Plate Pulsed Streamer Discharge

In this study, the spatial distributions of the emission intensity of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0) and \(\hbox{N}_{2}^{+} (\hbox{B}^{2}\Upsigma_{\rm u}^{+}\rightarrow \hbox{X}^{2}\Upsigma_{\rm g}^{+},\) 0-0, 391.4 nm) are investigated in the atmospheric pressure pulsed streamer discharge of H₂O and N₂ mixture in a needle-plate reactor configuration. The effects of pulsed peak voltage, pulsed repetition rate, input power, and O₂ flow rate on the spatial distributions of the emission intensity of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0), \(\hbox{N}_{2}^{+} (\hbox{B}^{2}\Upsigma _{\rm u}^{+} \rightarrow \hbox{X}^{2}\Upsigma _{\rm g}^{+},\) 0-0, 391.4 nm), and the vibrational temperature of N₂ (C) in the lengthwise direction from needle to plate are attained. It is found that the emission intensities of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0) and \(\hbox{N}_{2}^{+} (\hbox{B}^{2}\Upsigma_{\rm u}^{+} \rightarrow \hbox{X}^{2}\Upsigma_{\rm g}^{+},\) 0-0, 391.4 nm) rise with increasing the pulsed peak voltage, the pulsed repetition rate and the input power, and decrease with increasing O₂ flow rate. In the direction from needle to plate, the emission intensity of OH (\(\hbox{A}^{2}\Upsigma {\rightarrow}\hbox{X}^{2}\Uppi,\) 0-0) decreases firstly, and rises near the plate electrode, while the emission intensity of \(\hbox{N}_{2}^{+}(\hbox{B}^{2}\Upsigma_{\rm u}^{+} \rightarrow \hbox{X}^{2}\Upsigma_{\rm g}^{+},\) 0-0, 391.4 nm) is nearly constant along the needle to plate direction firstly, and rises sharply near the plate electrode. The vibrational temperature of N₂ (C) is almost independent of the pulsed peak voltage and the pulsed repetition rate, but rises with increasing the O₂ flow rate and keeps nearly constant in the lengthwise direction. The main physicochemical processes involved are discussed.