Well-ordered self-assembled monolayers created via vapor-phase reactions on a monolayer template

The reaction of vapor-phase alkyl isocyanates (O=C=N-(CH2)n-1CH3) with OH-terminated alkanethiol template monolayers on Au produces well-organized self-assembled monolayers, containing intrachain carbamate linkages (Au/S(CH2)16O(C=O)NH(CH2)n-1CH3, where n = 1-8, 11, and 12). X-ray photoelectron spectroscopy, contact angle goniometry, and reflection absorption infrared spectroscopy suggest that the template surface completely reacts with the isocyanates yielding a monolayer that contains an interchain hydrogen-bonded carbamate network. Spectroscopic data indicates that the alkyl underlayer remains well ordered following reaction with the isocyanates. The order of the overlayer and the hydrogen-bonding interactions between adjacent chains increase as a function of the alkyl isocyanate chain length, n. The overlayer appears to be well ordered for n > or = 5.     

Determination of chain orientation in the monolayers of amino-acid-derived schiff base at the air-water interface using in situ infrared reflection absorption spectroscopy

The chain orientation in the monolayers of amino-acid-derived Schiff base, 4-(4-dodecyloxy)-2-hydroxybenzylideneamino)benzoic acid (DSA), at the air-water interface has been determined using infrared reflection absorption spectroscopy (IRRAS). On pure water, a condensed monolayer is formed with the long axes of Schiff base segments almost perpendicular to the water surface. In the presence of metal ions (Ca2+, Co2+, Zn2+, Ni2+, and Cu2+) in the subphase, the monolayer is expanded and the long axes of the Schiff base segments are inclined with respect to the monolayer normal depending on metal ion. The monolayer thickness, which is an important parameter for quantitative determination of orientation of hydrocarbon chains, is composed of alkyl chains and salicylideneaniline portions for the DSA monolayers. The effective thickness of the Schiff base portions is roughly estimated in the combination of the IRRAS results and surface pressure-area isotherms for computer simulation, since the only two observable p- and s-polarized reflectance-absorbance (RA) values can be obtained. The alkyl chains with almost all-trans conformations are oriented at an angle of about 10 degrees for H2O, 15 degrees for Ca2+, 30 degrees for Co2+, 35 degrees -40 degrees for Zn2+, and 35 degrees -40 degrees for Ni2+ with respect to the monolayer normal. The chain segments linked with gauche conformers in the case of Cu2+ are estimated to be 40 degrees -50 degrees away from the normal.     

Radiation damage to alkyl chain monolayers on semiconductor substrates investigated by electron spectroscopy

Monolayers of alkyl chains, attached through direct Si-C bonds to Si(111), via phosphonates to GaAs(100) surfaces, or deposited as alkyl-silane monolayers on SiO2, are investigated by ultraviolet and inverse photoemission spectroscopy and X-ray absorption spectroscopy. Exposure to ultraviolet radiation from a He discharge lamp, or to a beam of energetic electrons, leads to significant damage, presumably associated with radiation- or electron-induced H-abstraction leading to carbon-carbon double-bond formation in the alkyl monolayer. The damage results in an overall distortion of the valence spectrum, in the appearance of (occupied) states above the highest occupied molecular orbital of the alkyl molecule, and in a characteristic (unoccupied state) pi resonance at the edge of the carbon absorption peak. These distortions present a serious challenge for the interpretation of the electronic structure of the monolayer system. We show that extrapolation to zero damage at short exposure times eliminates extrinsic features and allows a meaningful extraction of the density of state of the pristine monolayer from spectroscopy measurements.     

Image contrast analysis of STM images of self-assembled dioctadecyl chalcogenides on graphite at the liquid-solid interface.

The structures of self-assembled monolayers of dioctadecyl selenide (CH3(CH2)17)2Se and dioctadecyl telluride (CH3(CH2)17)2Te, as well as dioctadecyl ether (CH3(CH2)17)2O and dioctadecyl sulfide (CH3(CH2)17)2S, on graphite at the liquid-solid interface were systematically investigated by scanning tunneling microscopy (STM). Both dioctadecyl selenide and telluride formed monolayer structures in which the tilt angle between the molecular axis of the alkyl chain and the lamellae axis was 90 degrees , while dioctadecyl ether assembled with a tilt angle of 60 degrees . Dioctadecyl sulfide was found to make two different self-assembled structures having tilt angles of 60 and 90 degrees . When selenide was embedded in ether compounds in mixed self-assembled monolayers, the alkyl chains of the selenide became blurred, implying that the alkyl chains in the monolayers were unstable. This is in contrast with the structure of co-adsorbed monolayers of the ether and sulfide compounds, where the images of all alkyl chains had high spatial resolution. For the co-adsorbed monolayers, the image contrast of chalcogen atoms was normalized compared with that of alkyl chains of the ether compound in the same image frame. The normalized image contrast was found to be independent of the measurement conditions involving tip shapes, having the following trend, Te>Se>S>C>O. The difference in the normalized image contrast among chalcogen atoms are discussed based on fundamental parameters like polarizability and atomic radii.     

The role of nonsurface-active species at interfacial molecular recognition by melamine-type monolayers

The main characteristics of Langmuir monolayers are radically changed by molecular recognition of hydrogen bond nonsurface-active species. The change in the thermodynamic, phase, and structural features by molecular recognition of dissolved uracil or barbituric acid by 2,4-di(n-undecylamino)-6-amino-1,3,5-triazine (2C11H23-melamine) monolayers is characterized by combination of surface pressure studies with Brewster angle microscopy (BAM) imaging and Grazing incidence X-ray diffraction (GIXD) measurements. Phase behavior of the 2C11H23-melamine monolayer and morphology of the condensed phase domains are changed drastically, but in a specific way, by molecular recognition of uracil or barbituric acid. The main characteristics of the interfacial system can be essentially affected by the kinetics of the recognition process. Pure 2C11H23-melamine monolayers show only small compact, but nontextured domains. The monolayers of 2C11H23-melamine-uracil assemblies develop well-shaped circular condensed-phase domains having an inner texture with alkyl chains essentially oriented parallel to the periphery and having a striking tendency to two-dimensional (2D) Ostwald ripening. The 2C11H23-melamine-barbituric acid monolayers form large homogeneous areas of condensed phase that transfer at smaller areas per molecule to a homogeneous condensed monolayer. BAM imaging of corresponding assemblies with ((CH3(CH2)11O(CH2)3)2-melamine having modified alkyl chains demonstrates the specific effect of the monolayer component. GIXD results reveal that molecular recognition of pyrimidine derivatives gives rise only to quantitative changes in the two-dimensional lattice structure. The striking differences in the main characteristics between the supramolecular species are related to their different chemical structures. Quantum chemical calculations using the semiempirical PM3 method provide information about the different nature of the hydrogen-bonding-based supramolecular structures.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Chemical, electrochemical, and structural stability of low-density self-assembled monolayers

The stability of low-density self-assembled monolayers of mercaptohexadecanoic acid on gold is studied under a variety of storage conditions--air at room temperature, argon at room temperature and 4 degrees C, and ethanol at room temperature. The structural monotony of the low-density monolayers was assessed by monitoring the alkyl chains of LDSAMs by grazing-angle Fourier transform infrared spectroscopy as a function of time. Independently of the storage conditions, both symmetric and asymmetric methylene stretches at 2923 and 2852 cm-1 decreased after 4 weeks to 2919 and 2849 cm-1, respectively. These data suggest an increased ordering of the alkyl chains that is distinctly different from that of conventional high-density monolayers of mercaptohexadecanoic acid included as a reference in this study. As a further extension of this observation, the electrochemical barrier properties of the low-density monolayers were assessed by electrochemical impedance spectroscopy and did not change significantly for any of the storage conditions over a period of 4 weeks. Moreover, X-ray photoelectron spectroscopy was used to assess the chemical changes in the low-density monolayers over time. The chemical composition was essentially unaltered for all storage conditions. Specifically, oxidation of the sulfur headgroup, a common cause of monolayer degradation, was excluded for all test conditions on the basis of XPS analysis. This study confirms excellent storage stability for low-density monolayers under commonly used storage conditions and bridges an important technological gap between these systems and conventional high-density systems.     

Monolayer formation of alkyl chain-containing phosphoric acid amphiphiles at the air/water (pH 5.6) interface: influence of temperature and cations

In the four studied monoalkyl phosphoric acids (n-C(12)H(25)OPO(OH)(2), MDP; n-C(14)H(29)OPO(OH)(2), MTP; n-C(16)H(33)OPO(OH)(2), MHP; and n-C(18)H(37)OPO(OH)(2)MOP), only MOP can form an insoluble monolayer at the air/water interface (pH 5.6), suggesting that the longer alkyl chain (> or =C(18)) is essential for the formation of insoluble monolayers. On the contrary, all four corresponding dialkyl phosphoric acids ((n-C(12)H(25)O)(2)PO(OH), DDP; (n-C(14)H(29)O)(2)PO(OH), DTP; (n-C(16)H(33)O)(2)PO(OH), DHP; and (n-C(18)H(37)O)(2)PO(OH) DOP) can form insoluble monolayers, with only the pi-A isotherm of DDP showing a phase transition plateau at 25 degrees C. The enhancement of the subphase temperature not only increases the plateau pressure of the DDP monolayer, but also induces the emergence of a plateau for the DTP monolayer. In contrast to the weak influence of Na(+) and K(+) (1 x 10(-4) M in the subphases, pH approximately 5.6) on the pi-A isotherm of DDP, Ca(2+), Sr(2+), and Ba(2+) (1 x 10(-4) M in the subphases, pH approximately 5.6) have an evident impact on the isotherms of DDP, and the different isotherm results indicate that DDP can recognize the three divalent cations at the air/water interface. In addition, the gaseous portion and phase transition plateaus of the isotherms of some DAPs on pure water and on subphases containing Ca(2+), Sr(2+), or Ba(2+) were well simulated by Volmer's equation of state and Vollhardt's equation, except for a small difference for gas phases around critical points. The relationship between the plateau and the net molecule area is also discussed.     

Nanoscale patterning of alkyl monolayers on silicon using the atomic force microscope

Self-assembled monolayers (SAMs) of 1-alkenes on hydrogen-passivated silicon substrates were successfully patterned on the nanometer scale using an atomic force microscope (AFM) probe tip. Nanoshaving experiments on alkyl monolayers formed on H-Si(111) not only demonstrate the flexibility of this technique but also show that patterning with an AFM probe is a viable method for creating well-defined, nanoscale features in a monolayer matrix in a reproducible and controlled manner. Features of varying depths (2-15 nm) were created in the alkyl monolayers by controlling the applied load and the number of etching scans made at high applied loads. The patterning on these SAM films is compared with the patterning of alkyl siloxane monolayers on silicon and mica.     

Grafting cavitands on the Si(100) surface

Cavitand molecules having double bond terminated alkyl chains and different bridging groups at the upper rim have been grafted on H-terminated Si(100) surface via photochemical hydrosilylation of the double bonds. Pure and mixed monolayers have been obtained from mesitylene solutions of either pure cavitand or cavitand/1-octene mixtures. Angle resolved high-resolution X-ray photoelectron spectroscopy has been used as the main tool for the monolayer characterization. The cavitand decorated surface consists of Si-C bonded layers with the upper rim at the top of the layer. Grafting of pure cavitands leads to not-well-packed layers, which are not able to efficiently passivate the Si(100) surface. By contrast, monolayers obtained from cavitand/1-octene mixtures consist of well-packed layers since they prevent silicon oxidation after aging. AFM measurements showed that these monolayers have a structured topography, with objects protruding from the Si(100) surface with average heights compatible with the expected ones for cavitand molecules.     

Characterization and 2D self-assembly of CdSe quantum dots at the air-water interface

Langmuir film properties, UV-vis spectroscopy, epifluorescence microscopy, and transmission electron microscopy were used to study CdSe quantum dots (QDs) in 2D. By combining these results, it was possible to determine the molar absorptivity, limiting nanoparticle area, luminescence property, and arrangement of the QDs in the monolayer films at the air-water interface. Either trioctylphosphine oxide (TOPO) or 1-octadecanethiol (ODT) stabilized the QDs. The data collected reveal that TOPO forms close-packed monolayers on the surface of the QDs and that ODT-stabilized QDs undergo alkyl chains interdigitation. It was also found that varying the nanoparticle size, nature of surfactant, surface pressure, and mixed monolayers could help engineer the 2D self-assembly of the QDs at the air-water interface. Of practical importance is the transfer of these monolayer films onto hydrophilic or hydrophobic solid substrates, which could be successfully accomplished via the Langmuir-Blodgett film deposition technique.     

Molecular recognition of cytosine- and guanine-functionalized nucleolipids in the mixed monolayers at the air-water interface and Langmuir-Blodgett films

Molecular recognition of mixed nucleolipids of 1-(2-octadecyloxycarbonylethyl)cytosine and 7-(2-octadecyloxycarbonylethyl)guanine in the monolayers at the air-water interface and Langmuir-Blodgett (LB) films has been investigated in detail using surface pressure/potential-area isotherms, infrared reflection-absorption spectroscopy (IRRAS), and Fourier transform infrared (FTIR) transmission spectroscopy, respectively. Prior to molecular recognition, the cytosine moieties in the monolayer were hydrogen bonded with an almost flat-on orientation, the alkyl chains were uniaxially oriented with respect to the film normal, the guanine moieties in the monolayer were stacked probably through pi-pi interaction with an end-on orientation, and the C-C-C planes of the alkyl chains were preferentially oriented parallel to the water surface. In the monolayer of equimolar mixture, molecular recognition between the cytosine and guanine moieties occurred together with the ring planes of base pairing and the C-C-C planes of the alkyl chains favorably oriented parallel to the water surface. The guanine moieties underwent an orientation change from an end-on mode before molecular recognition to a flat-on one after molecular recognition. The base pairing between the cytosine and guanine moieties in the monolayers was achieved since the N7-substituted guanine derivatives suppressed the formation of guanine tetramers. Both the IRRAS spectra of the monolayers and the FTIR spectra of the LB films presented the exact sites in the cytosine and guanine moieties for the formation of triple hydrogen bonds. The base pairing resulted in a change in molecular orientation and interaction, and the corresponding LB film exhibited a different phase transition behavior from a typical crystal transition for the cytosine-functionalized nucleolipids and an analogous glass transition for the guanine-functionalized nucleolipids. The thermal stability of the mixed LB film was improved in comparison to the LB films of pure components.     

Alkanethiols on platinum: multicomponent self-assembled monolayers

We have studied the formation of self-assembled monolayers (SAMs) of n-alkanethiols on platinum thin films using X-ray photoelectron spectroscopy (XPS), reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and contact angle (CA) measurements. Specifically, SAMs of 1-hexanethiol, 1-dodecanethiol, and 1-octadecanethiol were grown on polycrystalline Pt films, and the effects of Pt surface preparation, deposition conditions, and solvent treatments on the initial quality and stability of the monolayer in air were investigated. The SAMs prepared under ambient conditions on piranha-cleaned and UV/ozone-cleaned substrates were compared to monolayers formed on template-stripped Pt in an inert atmosphere. We found that alkanethiols deposited from 1 mM ethanolic solutions on piranha-cleaned Pt formed densely packed monolayers in which alkyl chains were oriented close to the surface normal. Stored in the laboratory ambient, these monolayers were unchanged over about 1 week but were largely oxidized in about 1 month. No evidence was found of molecules being weakly bound within the monolayer or having undergone C-S bond scission; however, three distinct sulfur states were observed for all samples in the XPS of the S 2p region. The lowest- and highest-binding-energy components are assigned to alkylthiolate and partially oxidized alkylthiolate species, respectively. The remaining S 2p component (approximately one-third of the sulfur layer), intermediate in binding energy between the other two components, is attributed to a chemisorbed species with a S binding configuration distinct from the majority alkylthiolate: for example, S bound to Pt bound to O, S with a different Pt coordination number, or S in an adsorbed disulfide.     

Surface structure and chemical switching of thioctic acid adsorbed on Au(111) as observed using near-edge X-ray absorption fine structure

Thioctic acid (alpha-lipoic acid) is a molecule with a large disulfide-containing base, a short alkyl chain with four CH2 units, and a carboxyl termination. Self-assembled monolayer (SAM) films ofthioctic acid adsorbed on Au(111) have been investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS) to determine film quality, bonding, and morphology. Using standard preparation protocols for SAMs, that is, dissolving thioctic acid in ethanol and exposing gold to the solution, results in poor films. These films are highly disordered, contain a mixture of carboxyl and carboxylate terminations, have more than monolayer coverage, and exhibit unbound disulfide. Conversely, forming films by dissolving 1 mmol thioctic acid into 5% acetic acid in ethanol (as previously reported with carboxyl-terminated alkanethiols) forms ordered monolayers with small amounts of unbound sulfur. NEXAFS indicates tilted over endgroups with the carboxyl group normal on average 38 degrees from the surface normal. Slight angle-dependent intensity modulations in other features indicate alkyl chains statistically more upright than prostrate on the surface. Reflection-absorption Fourier transform infrared (RA-FTIR) spectra indicate hydrogen bonding between neighboring molecules. In such well-formed monolayers, a stark reorientation occurs upon deprotonation of the endgroup by rinsing in a KOH solution. The carboxylate plane normal is now about 66 degrees from sample normal, a much more upright orientation. Data indicate this reorientation may also cause a more upright orientation to the alkyl portion of the molecules.     

Comparative study of self‐assembly of a range of monofunctional aliphatic molecules on magnetron‐sputtered aluminium

The adsorption of a range of organic molecules from toluene onto the oxidized surface of magnetron‐sputtered aluminium metal is studied using sessile drop water contact angle measurements. Molecules with different head group functionalities and various chain lengths are considered, including alkyl carboxylic acids, alkyl phosphonic acids, alkyl amines, alkyl trimethoxysilanes, alkyl trichlorosilanes and epoxy alkanes. Alkyl phosphonic and carboxylic acids are identified as readily forming the most well‐packed monolayers on the aluminium surface, whereas the others adsorb less well and the chlorosilanes polymerize as a result of combination with moisture to form a thick deposit. The high‐adsorption‐density monolayers of alkyl phosphonic and carboxylic acids were studied using polarization modulation infrared reflection–absorption spectroscopy (PM‐IRRAS) and x‐ray photoelectron spectroscopy (XPS): PM‐IRRAS reveals relatively poorer ordering of the C₁₀ alkyl carboxylic acid monolayer compared with that formed from the phosphonic acid, and XPS data suggest that this is likely to relate to a lower ability to displace preadsorbed volatile organic compounds. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydrolytic stability of organic monolayers supported on TiO2 and ZrO2

The hydrolytic stability of C18 monolayers supported on TiO2 and ZrO2 was studied. Three types of monolayers were prepared from the following octadecyl modifiers: (1) octadecyldimethylchlorosilane (C18H37Si(CH3)2Cl); (2) octadecylsilane (C18H37SiH3); and (3) octadecylphosphonic acid (C18H37P(O)(OH)2). The hydrolysis of the surfaces prepared was studied under static conditions at 25 and 65 degrees C at pH 1-10. On the basis of the loss of grafted material, the stability of the monolayers fall in the following range: C18H37P(O)(OH)2 > or = C18H37SiH3 > C18H37Si(CH3)2Cl. At 25 degrees C, monolayers from C18H37P(O)(OH)2 showed only approximately 2-5% loss in grafting density after one week at pH 1-10. The high stability of these monolayers was explained because of the strong interactions of the phosphonic acids with the substrates. Monolayers from C18H37Si(CH3)2Cl showed poor hydrolytic stability at any pH, which was explained because of the low stability of Ti-O-Si and Zr-O-Si bonds. Unlike monofunctional silanes, trifunctional silane (C18H37SiH3) yielded surfaces that showed good hydrolytic stability. This suggests that the stability of the monolayers from trifunctional silanes is primarily due to "horizontal" bonding (Si-O-Si or Si-OH...HO-Si) rather than due to bondingwith the matrix (M-O-Si). At 65 degrees C, all C18 surfaces become more susceptible to hydrolysis; however, the trend observed for 25 degrees C remained unchanged. Low-temperature nitrogen adsorption was used to study the adsorption properties of the monolayers as a function of their grafting density. The energy of adsorption interactions showed a significant increase as the grafting density of the monolayers decreased. The order of the alkyl groups in the monolayers, as assessed from CH2 stretching, decreased as the grafting density of the monolayers decreased.     

Si-C-bound alkyl chains on oxide-free Si: towards versatile solution preparation of electronic transport quality monolayers

We show that electronic transport quality alkyl chain mono-layers can be prepared from dilute solution, rather than from neat alkanes, and on Si (100) instead of (111) surfaces. High monolayer quality was deduced from XPS and from comparing current-voltage curves of Hg/alkyl/Si junctions with those for junctions with monolayers made from neat alkanes. XPS shows that limited surface oxidation does not harm the integrity of the monolayer. Solution preparation significantly widens the range of molecules that can be used for transport studies.     

Langmuir-Blodgett films of a Mo-blue nanoring [Mo(142)O(429)H(10)(H(2)O)(49)(CH(3)CO(2))(5)(CH(3)CH(2)CO(2))](30)(-) (Mo(142)) by the semiamphiphilic method

Langmuir monolayers and LB films of the ring-shaped mixed-valence polyoxomolybdate [Mo142O429H10(H2O)49(CH3CO2)5(CH3CH2CO2)](30-) (Mo142) dissolved in the aqueous subphase have been successfully fabricated by using the adsorption properties of a DODA monolayer. Infrared and ultraviolet-visible spectroscopy of the LB films indicates that Mo142 and DODA molecules are incorporated within these LB films. X-ray reflectivity experiments indicate that the LB films exhibit a well-defined lamellar structure formed by bilayers of DODA molecules alternating with monolayers of Mo142. Using behenic acid-modified hydrophobic quartz substrate is critical for the formation of the well-defined lamellar structure. From the values of the periodicity obtained by these experiments it is clear that the Mo142 clusters lie flat along the charged organic layers. AFM images also showed the flat and homogeneous films on the quartz substrates treated with behenic acid. Cyclic voltammograms of Mo142-LB films deposited on ITO substrates showed quasi-reversible oxidation/reduction waves with positive shift of the potential compared to the case of solution.     

Cross metathesis on olefin-terminated monolayers on Si(111) using the Grubbs' catalyst

This paper reports the functionalization and patterning of olefin-terminated monolayers on Si(111) through cross metathesis. A simple, one-step synthesis of a diolefin--CH2=CH(CH2)9O(CH2)9CH=CH2--was developed from commercially available starting materials. Mixed partially olefin-terminated monolayers of this novel diolefin and 1-octadecene on hydrogen-terminated Si(111) were obtained. The olefins are raised above the rest of the monolayer and thus sterically accessible for further functionalization. Olefin-terminated monolayers were reacted with the Grubbs' first generation catalyst and olefins in solution that were terminated with fluorines, carboxylic acids, alcohols, aldehydes, and alkyl bromides. Characterization of these monolayers using X-ray photoelectron spectroscopy and horizontal attenuated total reflection infrared spectroscopy demonstrated that olefins on the surface had reacted via cross metathesis to expose fluorines, carboxylic acids, aldehydes, alcohols, and bromides. Through calibration experiments, we demonstrated a simple 1:1 correspondence between the ratio of olefins in solution used in the assembly and the final composition of the mixed monolayers. Finally, these monolayers on silicon were patterned on the micrometer-size scale by soft lithography using microfluidic channels patterned into poly(dimethylsiloxane) (PDMS) stamps. Micrometer-wide lines of polymer brushes were synthesized on these monolayers and characterized by scanning electron microscopy. In addition, olefin-terminated monolayers were patterned into micrometer-sized lines exposing carboxylic acids by cross metathesis with olefins in solution. This method of patterning is broadly applicable and can find applications in a variety of fields including the development of biosensors and nanoelectronics.     

Molecular Orientation and Structure in LB Films of a Liquid Crystal MPUOPM Investigated by UV-Vis and IR Spectroscopy

"?Langmuir monolayers and LB films of 4-((s)-2-methylbutoxy)phenyl-(4'-(10-undecen-1-oyloxy)phenyl) methylenimine (MPUOPM) were investigated by ultraviolet-visible, polarized infrared spectroscopy. ?-A isotherms showed well-defined Langmuir monolayers were formed at an air/water interface for the MPUOPM and their mixture with SA. An inflection point at 13 mN/m appeared on the isotherm, which was due to the transition from the monolayer to multilayer. The polarized IR spectra of LB films of MPUOPM had provided new insight into the molecular orientation and structure. In LB films, the tilted angle between the alkyl chain and the normal line of the substrate was 48ffi, the tilted angle between the dipole moment of C=N and the normal line of the substrate was 51ffi. The alkyl chains assumed a trans-zigzag conformation but it included a few gauche conformers. The C=N groups were almost in one plane in the LB films. "