Basic and applied features of multicopper oxidases, CueO, bilirubin oxidase, and laccase

Multicopper oxidases (MCOs) such as CueO, bilirubin oxidase, and laccase contain four Cu centers, type 1 Cu, type II Cu, and a pair of type III Cu's in a protein molecule consisting of three domains with homologous structure to cupredoxin containing only type I Cu. Type I Cu mediates electron transfer between the substrate and the trinuclear Cu center formed by a type II Cu and a pair of type III Cu's, where the final electron acceptor O(2) is converted to H(2)O without releasing activated oxygen species. During the process, O(2) is reduced by MCOs such as lacquer laccase and bilirubin oxidase; the reaction intermediate II with a possible doubly OH(-)-bridged structure in the trinuclear Cu center has been detected. The preceding reaction intermediate I has been detected by the reaction of the lacquer laccase in a mixed valence state, at which type I Cu was cuprous and the trinuclear Cu center was fully reduced, and by the reaction of the Cys --> Ser mutant for the type I Cu site in bilirubin oxidase and CueO. An acidic amino acid residue located adjacent to the trinuclear Cu center was proved to function as a proton donor to these reaction intermediates. The substrate specificity of MCO for organic substrates is produced by the integrated effects of the shape of the substrate-binding site and the specific interaction of the substrate with the amino acid located adjacent to the His residue coordinating to the type I Cu. In contrast, the substrate specificity of the cuprous oxidase, CueO, is produced by the segment covering the Cu(I)-binding site so as to obstruct the access of organic substrates. Truncating the segment spanning helix 5 to helix 7 greatly reduced the specificity of CueO for Cu(I) and prominently enhanced the low oxidizing activity for the organic substrates, indicating the success of protein engineering to modify the substrate specificity of MCO.     

Effect of polymer excipients on the enzyme activity of lyophilized bilirubin oxidase and beta-galactosidase formulations

The effects of excipients on the protein stability during lyophilization as well as the storage stability of lyophilized bilirubin oxidase (BO) and beta-galactosidase (GA) formulations were studied using four polymer excipients: dextran, polyvinylalcohol (PVA), poly(acrylic acid) (PAA), and alpha, beta-poly(N-hydroxyethyl)-L-aspartamide (PHEA). Denaturation of BO and GA during lyophilization largely depended on the excipient used. Dextran appeared to cause severe damage to proteins, whereas PHEA protected proteins effectively from denaturation. Storage stability of BO and GA formulations also depended on the excipients, such that the formulations containing dextran and PAA were relatively unstable. Storage stability was improved by absorption of a small amount of water for all the formulations studied. Absorption of a larger amount of water, however, decreased the storage stability of the formulations containing PVA, PAA or PHEA. In contrast, the storage stability of formulations containing dextran did not decrease noticeably with increasing water. This may be because formulations containing dextran have a higher glass transition temperature than formulations containing PVA, PAA or PHEA when a large amount of water is absorbed.     

Activity-based probes for studying the activity of flavin-dependent oxidases and for the protein target profiling of monoamine oxidase inhibitors

High profile: new activity-based protein profiling (ABPP) probes have been designed that target exclusively monoamine oxidases A and B within living cells (see picture; FAD=flavin adenine dinucleotide, FMN=flavin monodinucleotide). With these probes it could be shown that the MAO inhibitor deprenyl, which is in clinical use against Parkinson's disease, shows unique protein specificity despite its covalent mechanism of action.     

Electroactive multilayer assemblies of bilirubin oxidase and human cytochrome C mutants: insight in formation and kinetic behavior

Here, we report on cytochrome c/bilirubin oxidase multilayer electrodes with different cytochrome c (cyt c) forms including mutant forms of human cyt c, which exhibit different reaction rates with bilirubin oxidase (BOD) in solution. The multilayer formation via the layer-by-layer technique and the kinetic behavior of the mono (only cyt c) and biprotein (cyt c and BOD) multilayer systems are studied by SPR and cyclic voltammetry. For the layer construction, sulfonated polyaniline is used. The only cyt c containing multilayer electrodes show that the quantity of deposited protein and the kinetic behavior depend on the cyt c form incorporated. In the case of the biprotein multilayer with BOD, it is demonstrated that the catalytic signal chain from the electrode via cyt c to BOD and oxygen can be established with all chosen cyt c forms. However, the magnitude of the catalytic current as well as the kinetic behavior differ significantly. We conclude that the different cytochrome c forms affect three parameters, identified here, to be important for the functionality of the multilayer system: the amount of molecules per layer, which can be immobilized on the electrodes, the cyt c self-exchange rate, and the rate constant for the reaction with BOD.     

Spectroscopic and kinetic studies of perturbed trinuclear copper clusters: the role of protons in reductive cleavage of the O-O bond in the multicopper oxidase Fet3p

The multicopper oxidase Fet3p couples four 1e(-) oxidations of substrate to the 4e(-) reduction of O2 to H2O. Fet3p uses four Cu atoms to accomplish this reaction: the type 1, type 2, and coupled binuclear type 3 sites. The type 2 and type 3 sites together form a trinuclear Cu cluster (TNC) which is the site of O2 reduction. This study focuses on mutants of two residues, E487 and D94, which lie in the second coordination sphere of the TNC and defines the role that each plays in the structural integrity of the TNC, its reactivity with O2, and in the directional movement of protons during reductive cleavage of the O-O bond. The E487D, E487A, and D94E mutants have been studied in the holo and type 1 depleted (T1D) forms. Residue E487, located near the T3 center, is found to be responsible for donation of a proton during the reductive cleavage of the O-O bond in the peroxide intermediate and an inverse kinetic solvent isotope effect, which indicates that this proton is already transferred when the O-O bond is cleaved. Residue D94, near the T2 site, plays a key role in the reaction of the reduced TNC with O2 and drives electron transfer from the T2 Cu to cleave the O-O bond by deprotonating the T2 Cu water ligand. A mechanism is developed where these second sphere residues participate in the proton assisted reductive cleavage of the O-O bond at the TNC.     

Molecular and electronic structures of dinuclear iron complexes incorporating strongly electron-donating ligands: implications for the generation of the one- and two-electron oxidized forms

The ligands (L(t-Bu(2)))(2-), (L(Me(2)))(2-), and (L(Cl(2)))(2-) have been employed for the synthesis of the dinuclear Fe(III) complexes [L(t-Bu(2))Fe(μ-O)FeL(t-Bu(2))], [L(Me(2))Fe(μ-O)FeL(Me(2))], and [L(Cl(2))Fe(μ-O)FeL(Cl(2))]. The strongly electron-donating groups (tert-amines and phenolates) were chosen to increase the electron density at the coordinated ferric ions and thus to facilitate the oxidation of the complexes, with the possibility of fine-tuning the electronic structures by variation of the remote substituents. Molecular structures established in the solid (by single-crystal X-ray diffraction) and in solution (by X-ray absorption spectroscopy) show that the Fe ions are five-coordinate in a square-pyramidal coordination environment with the ligand adopting a trans-conformation. Spectroscopic and magnetic characterization establishes the highly covalent nature of the Fe(III)-O(oxo) and Fe(III)-O(Ph) bonds. The variations in the donor capabilities of the phenolates (due to changes in the remote substituents) are compensated for by a flexible electron donation of the Fe(III)-O(oxo) bonding. Spectroelectrochemical characterization demonstrates that [L(t-Bu(2))Fe(μ-O)FeL(t-Bu(2))] can be oxidized reversibly at +0.27 and +0.44 V versus Fc(+)/Fc, whereas [L(Me(2))Fe(μ-O)FeL(Me(2))] and [L(Cl(2))Fe(μ-O)FeL(Cl(2))] exhibit irreversible oxidations at +0.29 and +0.87 V versus Fc(+)/Fc, respectively. UV-vis, electron paramagnetic resonance (EPR), X-ray absorption spectroscopy (XAS), and Mo?ssbauer spectroscopy show that the successive oxidations of [L(t-Bu(2))Fe(μ-O)FeL(t-Bu(2))] are ligand-centered leading to the monophenoxyl radical complex [(?)L(t-Bu(2))Fe(III)(μ-O)Fe(III)L(t-Bu(2))](+) (with the oxidation primarily localized on one-half of the molecule) and the diphenoxyl radical complex [(?)L(t-Bu(2))Fe(III)(μ-O)Fe(III?)L(t-Bu(2))](2+). Both products are unstable in solution and decay by cleavage of an Fe(III)-O(oxo) bond. The two-electron oxidized species is more stable because of two equally strong Fe(III)-O(oxo) bonds, whereas in the singly oxidized species the Fe(III)-O(oxo) bond of the non-oxidized half is weakened. The decay of the monocation results in the formation of [L(t-Bu(2))Fe(III)](+) and [L(t-Bu(2))Fe(IV)=O], while the decay of the dication yields [(?)L(t-Bu(2))Fe(III)](2+) and [L(t-Bu(2))Fe(IV)=O]. Follow-up reactions of the oxidized fragments with the counteranion of the oxidant, [SbCl(6)](-), leads to the formation of [Fe(III)Cl(4)](-).     

Nature of the oxomolybdenum-thiolate pi-bond: implications for Mo-S bonding in sulfite oxidase and xanthine oxidase

The electronic structure of cis,trans-(L-N(2)S(2))MoO(X) (where L-N(2)S(2) = N,N'-dimethyl-N,N'-bis(2-mercaptophenyl)ethylenediamine and X = Cl, SCH(2)C(6)H(5), SC(6)H(4)-OCH(3), or SC(6)H(4)CF(3)) has been probed by electronic absorption, magnetic circular dichroism, and resonance Raman spectroscopies to determine the nature of oxomolybdenum-thiolate bonding in complexes possessing three equatorial sulfur ligands. One of the phenyl mercaptide sulfur donors of the tetradentate L-N(2)S(2) chelating ligand, denoted S(180), coordinates to molybdenum in the equatorial plane such that the OMo-S(180)-C(phenyl) dihedral angle is approximately 180 degrees, resulting in a highly covalent pi-bonding interaction between an S(180) p orbital and the molybdenum d(xy) orbital. This highly covalent bonding scheme is the origin of an intense low-energy S --> Mo d(xy) bonding-to-antibonding LMCT transition (E(max) approximately 16000 cm(-)(1), epsilon approximately 4000 M(-)(1) cm(-)(1)). Spectroscopically calibrated bonding calculations performed at the DFT level of theory reveal that S(180) contributes approximately 22% to the HOMO, which is predominantly a pi antibonding molecular orbital between Mo d(xy) and the S(180) p orbital oriented in the same plane. The second sulfur donor of the L-N(2)S(2) ligand is essentially nonbonding with Mo d(xy) due to an OMo-S-C(phenyl) dihedral angle of approximately 90 degrees. Because the formal Mo d(xy) orbital is the electroactive or redox orbital, these Mo d(xy)-S 3p interactions are important with respect to defining key covalency contributions to the reduction potential in monooxomolybdenum thiolates, including the one- and two-electron reduced forms of sulfite oxidase. Interestingly, the highly covalent Mo-S(180) pi bonding interaction observed in these complexes is analogous to the well-known Cu-S(Cys) pi bond in type 1 blue copper proteins, which display electronic absorption and resonance Raman spectra that are remarkably similar to these monooxomolybdenum thiolate complexes. Finally, the presence of a covalent Mo-S pi interaction oriented orthogonal to the MOO bond is discussed with respect to electron-transfer regeneration in sulfite oxidase and Mo=S(sulfido) bonding in xanthine oxidase.     

Cholesterol levels and activity of membrane bound proteins: characterization by thermal and electrochemical methods

The long-term goal of this investigation is to study the effects of increased cholesterol levels on the molecular activity of membrane-bound enzymes such as nitric oxide synthase, that are critical in the functioning of the cardiovascular system. In this particular investigation, we used differential scanning calorimetry (DSC) and dielectric thermal analysis (DETA) to study the effect of added cholesterol on melting/recrystallization and dielectric behavior, respectively, of phosphatidylcholine (PC) bilayered thin films. We also used electrochemical methods to investigate the effect of added cholesterol on the redox behavior of the oxygenase domain of nitric oxide synthase as a probe embedded in the PC films. The results show that added cholesterol in the PC films seems to depress the molecular dynamics as indicated by lowered current responses in the presence of cholesterol as well as a slight increase of the transition temperature in the overall two-phase regime behavior observed in PC–cholesterol films. These results are rationalized in the context of the general DSC and DETA behaviors of the PC–chol films.     

Synthesis,characterization, electrochemical behavior and antioxidant activity of new copper(II) coordination compounds with curcumin derivatives

Five new copper(II) coordination compounds were prepared by template synthesis, using curcumin, 2-hydrazinobenzothiazole and metal salt (copper chloride, bromide, acetate and nitrate) in 1:2:1 and 1:2:2 molar ratio. The complexes were characterized by elemental and thermogravimetric analysis, IR, UV–Vis and mass spectroscopic methods and cyclic voltammetric studies. On the basis of physico-chemical measurements the following formulae have been assigned to the complexes: [Cu(H₂L)(H₂O)₂]Cl₂·H₂O, [CuL]·H₂O, [Cu(H₂L)(H₂O)Br]Br·5H₂O, [Cu₂L(H₂O)₄](NO₃)₂·2H₂O and [Cu₂(H₂L)(NO₃)₄]·H₂O, where H₂L is the hydrazone ligand formed in the reaction conditions. Metal complexes were tested for antioxidant activity by photochemiluminescence and this activity was quantified by comparison with TROLOX®, as standard. The results show that all complexes are more potent antioxidant agents than curcumin.     

Spectroscopic characterization of omega-substituted biphenylthiolates on gold and their use as substrates for "on-top" siloxane SAM formation

Self-assembled monolayers (SAMs) of omega-substituted biphenylthiolates (omega-MBP) on gold were characterized by spectral ellipsometry, X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRRAS), and vibrational sum frequency generation spectroscopy (VSFG). The vibrational studies of the SAMs were supported by an ab initio frequency analysis at HF/6-31G and BP86/6-31G levels, yielding an assignment of all relevant spectral features in the range from 3500 to 1200 cm(-1). We were able to demonstrate that hydroxy-terminated MBP (HMBP) SAMs are basically featureless in the range of the CH stretching vibrations. Accordingly, the adsorption of a SAM of octadecyltrichlorosilane (OTS) on top of this model surface could be studied. A red shift of the C-O stretching vibration from 1281 to 1264 cm(-1) was observed during the chemisorption of OTS, thus allowing for a quantification of the number of OTS molecules involved in surface binding of OTS, which was found to be about 26% on average.     

A new family of supramolecular multiferrocenyl rhomboids:Synthesis,characterization,and their electrochemical behavior

Two novel,supramolecular,multiferrocenyl rhomboids 5 and 6 have been successfully constructed from newly designed 60 ferrocenyl donor precursor 1 via coordination-driven self-assembly.The structures of all multiferrocenyl rhomboids were characterized by multinuclear NMR(¹H and ³¹P),CSI-TOF-MS, and PM6 semi-empirical molecular simulation,and their electrochemical behaviors have been investigated.     

Structural distortions and dynamic behavior of the elusive "L"-shaped cis-bicyclo[3.3.0]octenyllithium: X-ray crystallographic and NMR studies

Substituted cis-bicyclo[3.3.0]octenyllithium prepared by addition of t-BuLi to 3-methylene-1,4-cyclooctadiene in the presence of TMEDA crystallizes as a dimer with one unsolvated Li(+) sandwiched between the external faces of two allyl anions in a triple ion, and external to it the second Li(+) is bidentately complexed to TMEDA, 8. Within each allyl unit, the allyl bonds have different lengths, and all four rings deviate from coplanarity which relieves strain in the rings despite introducing partial localization of the allyl anions. A similar structure prevails in solution as shown by (7)Li NMR and the results of (7)Li{(1)H} HOESY and (1)H, (1)H NOESY experiments. Carbon-13 NMR line shape changes indicate that the system undergoes a fast allyl bond shift concerted with conformation shifts of the out of plane carbons, ca. DeltaG = 9 kcal x mol(-1). Cyclopentyllithium prepared by CH(3)Li cleavage of the trimethylstannyl derivative slowly undergoes an allowed ring opening to pentadienyllithium as well as deprotonating the solvent. The different behavior of dienylic lithium species is attributed to the relative separation of their termini.     

Flow-injection analysis for l-glutamate using immobilized l-glutamate oxidase: comparison of an enzyme reactor and enzyme electrode

An enzyme electrode and enzyme based on immobilized l-glutamate oxidase are used for the determination of l-glutamate in a flow-injection system. The hydrogen peroxide produced is monitored amperometrically. The enzyme reactor system surpasses the enzyme electrode system with regard to sensitivity and analytical speed. For both systems, the peak current is linearly related to the l-glutamate concentration in the range 5 × 10^?6-1 × 10^?3 M. l-Glutamate in seasoning can be determined very selectively with < 0.7% r.s.d.     

Preparation of "high specific activity" radiochemical forms of vanadium,manganese and thallium for metallo-toxicological studies

In this paper are presented the production methods for very "high specific activity" radionuclides (HSA-RN) of vanadium, manganese and thallium which have been developed in our laboratories for labelling different chemical forms of these elements present in the echo-systems in ultra-trace amounts, for metallo-toxicological and bio-kinetic studies. Use was made of both cyclotron and thermal nuclear reactor. If the nuclear reaction product has atomic number different from irradiated target, it is possible separating the radioactive nuclide from irradiated target, without addition of isotopic carrier. This kind of radionuclide is named No Carrier Added, NCA, and his specific activity, As is very high and can reach values close to the theoretical Carrier Free one, CF. The experimental determination of specific activity, chemical and radiochemical purities is mandatory for all these kinds of applications.     

Design parameters for tuning the type 1 Cu multicopper oxidase redox potential: insight from a combination of first principles and empirical molecular dynamics simulations

The redox potentials and reorganization energies of the type 1 (T1) Cu site in four multicopper oxidases were calculated by combining first principles density functional theory (QM) and QM/MM molecular dynamics (MD) simulations. The model enzymes selected included the laccase from Trametes versicolor, the laccase-like enzyme isolated from Bacillus subtilis, CueO required for copper homeostasis in Escherichia coli, and the small laccase (SLAC) from Streptomyces coelicolor. The results demonstrated good agreement with experimental data and provided insight into the parameters that influence the T1 redox potential. Effects of the immediate T1 Cu site environment, including the His(N(δ))-Cys(S)-His(N(δ)) and the axial coordinating amino acid, as well as the proximate H(N)(backbone)-S(Cys) hydrogen bond, were discerned. Furthermore, effects of the protein backbone and side-chains, as well as of the aqueous solvent, were studied by QM/MM molecular dynamics (MD) simulations, providing an understanding of influences beyond the T1 Cu coordination sphere. Suggestions were made regarding an increase of the T1 redox potential in SLAC, i.e., of Met198 and Thr232 in addition to the axial amino acid Met298. Finally, the results of this work presented a framework for understanding parameters that influence the Type 1 Cu MCO redox potential, useful for an ever-growing range of laccase-based applications.     

Spectroscopic studies of Pyrococcus furiosus superoxide reductase: implications for active-site structures and the catalytic mechanism

The combination of UV/visible/NIR absorption, CD and variable-temperature magnetic circular dichroism (VTMCD), EPR, and X-ray absorption (XAS) spectroscopies has been used to investigate the electronic and structural properties of the oxidized and reduced forms of Pyrococcus furiosus superoxide reductase (SOR) as a function of pH and exogenous ligand binding. XAS shows that the mononuclear ferric center in the oxidized enzyme is very susceptible to photoreduction in the X-ray beam. This observation facilitates interpretation of ground- and excited-state electronic properties and the EXAFS results for the oxidized enzyme in terms of the published X-ray crystallographic data (Yeh, A. P.; Hu, Y.; Jenney, F. E.; Adams, M. W. W.; Rees, D. C. Biochemistry 2000, 39, 2499-2508). In the oxidized state, the mononuclear ferric active site has octahedral coordination with four equatorial histidyl ligands and axial cysteinate and monodentate glutamate ligands. Fe EXAFS are best fit by one Fe-S at 2.36 A and five Fe-N/O at an average distance of 2.12 A. The EPR-determined spin Hamiltonian parameters for the high-spin (S = (5)/(2)) ferric site in the resting enzyme, D = -0.50 +/- 0.05 cm(-1) and E/D = 0.06, are consistent with tetragonally compressed octahedral coordination geometry. UV/visible absorption and VTMCD studies facilitate resolution and assignment of pi His --> Fe(3+)(t(2g)) and (Cys)S(p) --> Fe(3+)(t(2g)) charge-transfer transitions, and the polarizations deduced from MCD saturation magnetization studies indicate that the zero-field splitting (compression) axis corresponds to one of the axes with trans-histidyl ligands. EPR and VTMCD studies provide evidence of azide, ferrocyanide, hydroxide, and cyanide binding via displacement of the glutamate ligand. For azide, ferrocyanide, and hydroxide, ligand binding occurs with retention of the high-spin (S = 5/2) ground state (E/D = 0.27 and D < 0 for azide and ferrocyanide; E/D = 0.25 and D = +1.1 +/- 0.2 cm(-1) for hydroxide), whereas cyanide binding results in a low-spin (S = 1/2) species (g = 2.29, 2.25, 1.94). The ground-state and charge-transfer/ligand-field excited-state properties of the low-spin cyanide-bound derivative are shown to be consistent with a tetragonally elongated octahedral coordination with the elongation axis corresponding to an axis with trans-histidyl ligands. In the reduced state, the ferrous site of SOR is shown to have square-pyramidal coordination geometry in frozen solution with four equatorial histidines and one axial cysteine on the basis of XAS and UV and NIR VTMCD studies. Fe EXAFS are best fit by one Fe-S at 2.37 A and four Fe-N/O at an average distance of 2.15 A. VTMCD reveals a high-spin (S = 2) ferrous site with (Cys)S(p) --> Fe(2+) charge-transfer transitions in the UV region and (5)T(2g) --> (5)E(g) ligand-field transitions in the NIR region at 12400 and <5000 cm(-1). The ligand-field bands indicate square-pyramidal coordination geometry with 10Dq < 8700 cm(-1) and a large excited-state splitting, Delta (5)E(g) > 7400 cm(-1). Analysis of MCD saturation magnetization data leads to ground-state zero-field splitting parameters for the S = 2 ground state, D approximately +10 cm(-1) and E/D approximately 0.1, and complete assessment of ferrous d-orbital splitting. Azide binds weakly at the vacant coordination site of reduced SOR to give a coordination geometry intermediate between octahedral and square pyramidal with 10Dq = 9700 cm(-1) and Delta (5)E(g) = 4800 cm(-1). Cyanide binding results in an octahedral ferrous site with 10Dq = 10,900 cm(-1) and Delta (5)E(g) = 1750 cm(-1). The ability to bind exogenous ligands to both the ferrous and ferric sites of SOR is consistent with an inner-sphere catalytic mechanism involving superoxide binding at the ferrous site to yield a ferric-(hydro)peroxo intermediate. The structural and electronic properties of the SOR active site are discussed in relation to the role and bonding of the axial cysteine residue and the recent proposals for the catalytic mechanism.     

Spectroscopic characterization of site-specific [Fe(4)S(4)] cluster chemistry in ferredoxin:thioredoxin reductase: implications for the catalytic mechanism

Light regulation of enzyme activities in oxygenic photosynthesis is mediated by ferredoxin:thioredoxin reductase (FTR), a novel class of disulfide reductase with an active site comprising a [Fe(4)S(4)](2+) cluster and an adjacent disulfide, that catalyzes reduction of the thioredoxin disulfide in two sequential one-electron steps using a [Fe(2)S(2)](2+/+) ferredoxin as the electron donor. In this work, we report on spectroscopic (EPR, VTMCD, resonance Raman, and M?ssbauer) and redox characterization of the active site of FTR in various forms of the enzyme, including wild-type FTR, point-mutation variants at each of the active-site cysteine residues, and stable analogues of the one-electron-reduced FTR-Trx heterodisulfide intermediate. The results reveal novel site-specific Fe(4)S(4)-cluster chemistry in oxidized, one-electron-reduced, and two-electron-reduced forms of FTR. In the resting enzyme, a weak interaction between the Fe(4)S(4) cluster and the active-site disulfide promotes charge buildup at a unique Fe site and primes the active site to accept an electron from ferredoxin to break the disulfide bond. In one-electron-reduced analogues, cleavage of the active-site disulfide is accompanied by coordination of one of the cysteine residues that form the active-site disulfide to yield a [Fe(4)S(4)](3+) cluster with two cysteinate ligands at a unique Fe site. The most intriguing result is that two-electron-reduced FTR in which the disulfide is reduced to a dithiol contains an unprecedented electron-rich [Fe(4)S(4)](2+) cluster comprising both valence-delocalized and valence-localized Fe(2+)Fe(3+) pairs. These results provide molecular level insights into the catalytic mechanism of FTR, and two viable mechanisms are proposed.