1,2-双(四甲基环戊二烯基)四甲基二硅烷与六碳基钼的反应

1,2-双(四甲基环戊二烯基)四甲基二硅烷与正丁基锂作用生成(四甲基二硅撑)双(四甲基环戊二烯基负离子盐),后者随即与六碳基钼反应形成1,1'-(四甲基二硅撑)双(四甲基环戊二烯基铝负离子盐)-(Me₂SiSiMe₂)[Me₄CpMo(CO)₃-Li⁺]₂(I),I与冰醋酸作用,随即分别与CCl₄,NBS及I₂反应,生成相应的铝卤化合物(Me₂SiSiMe₂)[Me₄CpMo(CO)₃X]₂[X=Cl(1),Br(2),I(3)].I与CH₃I反应,在钼原子上发生烃基化,得到产物(Me₂SiSiMe₂)[Me₄CpMo(CO)₃Me]₂(4);I与单质I₂直接反应,生成脱硅桥产物Me₄Cp(CO)>₃I(5).经元素分析、IR及¹HNMR表征了化合物1-5的结构。     

四甲基二硅桥联茚基环戊二烯基四羰基二铁的合成、结构及热重排反应

ClMe₂SiSiMe₂Cl顺序与茚基锂和环戊二烯基锂作用,生成(1-C₉H₇)Me₂SiSiMe₂C₅H₅.后者进一步与五羰基铁反应,得到硅硅桥联茚基环戊二烯基化合物[η⁵,η⁵-(1-C₉H₆)Me₂SiSiMe₂C₅H₄]Fe₂(CO)₄ (2).化合物2在加热条件下发生重排反应,给出硅硅键和铁铁键复分解产物([-)Me₂Si(η⁵-1-C₉H₆)Fe(CO)₂SiMe2(η⁵-C₅H₄)Fe(CO)₂(]-) (3).利用X射线衍射法,测定了2和3的分子结构.     

碳锗双桥连二环戊二烯与羰基铁的反应

碳锗双桥连二环戊二烯(Me₂C)(Me₂Ge)(C₅H₄)₂(1)与五羰基铁在回流甲苯及二甲苯中的反应,得到正常的Fe-Fe键化合物(Me₂C)(Me₂Ge)[(η⁵-C₅H₃)Fe(CO)]₂(μ-CO)₂(3)和脱锗桥产物(Me₂C)[(η⁵-C₅H₄)Fe(CO)]₂(μ-CO)₂(4)以及一个结构新颖的化合物(Me₂C)[(η⁵-C₅H₃)[(Me₂Ge)Fe(CO)₂](η¹,η⁵-C₅H₃)[Fe(CO)₂](2).用X射线衍射分析測定了化合物3的晶体结构,并提出了可能的生成机理.     

新型桥联双四面体簇合物的合成与表征

利用(μ₃-CCO₂Et)Co₃(CO)₉与单阴离子试剂[Mo(CO)₃(η⁵-C₅H₄R)]-[R=H,C(O)Me]的反应合成了2个新的含CCo₂Mo骨架的簇合物(μ₃-CCO₂Et)Co₂Mo(CO)₈(η⁵-C₅H₄R)[R=H(1);R=C(O)Me(2)],进而用其与双阴离子试剂{-M(CO)₃[η⁵-C₅H₄C(O)]}₂-1,4-C₆H₄[M=Mo,W]反应合成了4个双四面体簇合物{(μ₃-CCO₂Et)CoMoM(CO)₇(η⁵-C₅H₄R)[η⁵-C₅H₄C(O)]}₂-1,4-C₆H₄[M=Mo,R=H(3);M=Mo,R=C(O)Me(4);M=W,R=H(5);M=W,R=C(O)Me(6)].这6个化合物的C和H元素分析,IR,¹HNMR等表征都与其结构一致.晶体X射线衍射分析表明,化合物2属单斜晶系,C₂/c空间群,晶胞参数a=1.1264(3)nm,b=1.1879(3)nm,c=3.3565(10)nm,β=93.320(5)°,V=4.484(2)nm₃,Z=8,D_c=1.867g·cm^-3,F(000)=2480,R=0.0369,wR=0.1150.     

开环茂金属成环及氢分子消除反应机理的理论研究

采用密度泛函方法(DFT)在M06-2X/def2-TZVPP//B3LYP/def2-TZVPP+ZPE水平下, 对以开环的(η⁵-C₅H₇)₂Ru为前驱体生成闭环(η⁵-C₅H₅)₂Ru的各种可能的反应路径进行了详细的研究. 最终确定其反应机理为: (η⁵-C₅H₇)₂Ru的一个η⁵-C₅H₇发生端碳成键的成环反应形成(η³-C₅H₇)Ru(η⁵-C₅H₇), 经过两步氢原子迁移到Ru原子上, 之后脱掉一个氢气分子形成(η⁵-C₅H₅)Ru(η⁵-C₅H₇), 而后另一个η⁵-C₅H₇再重复成环并进行两步氢迁移以及氢气分子消除而得到最终的产物(η⁵-C₅H₅)₂Ru.     

四甲基二硅桥连二(1-苯基环己基环戊二烯基)四羰基二铁的合成、结构及热重排反应研究

1,2-二(1-苯基环己基环戊二烯基)四甲基二硅烷与Fe(CO)₅在二甲苯中加热回流生成二铁化合物(Me₂SiSiMe₂)[(1-Ph-c-C₆H₁₀C₅H₃)Fe(CO)]₂(μ-CO)₂(2).通过柱层析分离到化合物2的顺反异构体2c和2t,并分别进行热重排反应,发现顺式底物2c重排生成反式重排产物[Me₂Si(c-C₆H₁₀PhC₅H₃)Fe(CO)₂]₂(3t),而反式底物2t重排则生成顺式重排产物3c.这表明重排反应是立体专一性的.通过X射线衍射分析测定了化合物2c和3t的晶体结构.     

新型双四面体过渡金属簇合物的合成与表征

利用Co₂(CO)₈与[Cl₃CC(O)OCH₂]₂的反应合成了以C(O)OCH₂CH₂OC(O)桥联两个Co₃C四面体骨架为特征的新型双四面体簇合物[(CO)₉Co₃(μ₃-C)C(O)OCH₂]₂(1);1与不同物质的量比的Na[M(CO)₃C₅H₄R](M=Mo,W;R=H,C(O)Me)反应,得到一步交换的产物(CO)₉Co₃(μ₃-C)C(O)OCH₂CH₂OC(O)(μ₃-C)Co₂M(CO)₈(C₅H₄R)[M=Mo,R=H(2);M=Mo,R=C(O)Me(3);M=W,R=H(4);M=W,R=C(O)Me(5)]或两步交换的产物[(C₅H₄R)(CO)₈Co₂M(μ₃-C)C(O)OCH₂]₂[M=Mo,R=H(6);M=Mo,R=C(O)Me(7);M=W,R=H(8);M=W,R=C(O)Me(9)].5或9分别与Na[Mo(CO)₃C₅H₅]以12的物质的量比反应得到含一个手性四面体骨架(CoMoWC)的(C₅H₅)(CO)₈Co₂Mo(μ₃-C)C(O)OCH₂CH₂O·C(O)(μ₃-C)CoMoW(CO)₇(C₅H₄C(O)Me)(C₅H₅)(10)或含两个手性四面体骨架(CoMoWC)的[(C₅H₅)(C₅H₄C(O)Me)(CO)₇CoMoW(μ₃-C)C(O)OCH₂]₂(11);对化合物1_11进行了CH元素分析、IR和¹HNMR等表征.结果表明,在金属交换反应中处于不同簇环境下的Co(CO)₃基团反应活性不同.对化合物1进行了晶体X射线衍射分析.化合物1的晶体属单斜晶系,P2₁/n(#14)空间群,晶胞参数a=0.933 0(2)nm,b=1.519 7(4)nm,c=1.178 3(4)nm,=91.16(2)°,Z=2,F(000)=972.分子结构呈中心对称.     

硅桥连双(三甲硅基环戊二烯基)钛化合物的合成及脱硅基反应

硅桥连双(三甲硅基环戊二烯基)双锂盐与TiCl₄·2THF反应,生成相应的钛化合物[E(C₅H₃SiMe₃)₂]TiCl₂[E=Me₂SiSiMe₂(3),Me₂SiOSiMe₂(5)],同时还分离到了脱一个三甲硅基的产物[E(C₅H₄)(C₅H₃SiMe₃)]TiCl₂[E=Me₂SiSiMe₂(4),Me₂SiOSiMe₂(6)].其中四甲基二硅氧桥连配体更容易发生这种脱硅基反应.通过元素分析、MS和¹HNMR谱表征了化合物3-6的分子结构.     

三(三甲硅基)环戊二烯基三羰基钼负离子的反应性

三(三甲硅基)环戊二烯基三羰基钼负离子锂盐[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3]^-Li^+(1), 分别与MeI、phCH~2Cl及ClCH~2COOC~2H~5反应生成相应的烃基化钼衍生物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3R,] (R=-CH~3, 2; -CH~2ph, 3;-CH~2COOC~2H~5, 4)。1与PCl~3反应除得到预期的钼氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3Cl](5)外, 主要得到钼磷氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3PCl~2] 6; 1与碘反应得到钼碘化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3I] 7; 1与HOAc作用后分别和CCl~4、NBS室温反应, 仅分离到脱去一个Me~3Si的钼卤化物[{η^5-(Me~3Si)~2C~5H~2}Mo(CO)~3X], (X:Cl, 8; Br, 9)。     

双核钼(I)配合物催化苯衍生物的Friedel-Crafts烷基化反应

钼配合物可有效催化苯衍生物的傅-克烷基化反应。苯衍生物（甲苯、苯甲醚、溴苯和苯酚）在催化量的双核钼羰基配合物[(η⁵-C₅Me₄R)Mo(CO)₃]₂（R=allyl, ⁿBu, ^tBu, Ph, Bz）和邻四氯苯醌共同作用下，与卤代烃、醇及苯乙烯反应，产物收率较高，选择性较好。     

Thirty years of organometallic aryldiazenido arylazo derivatives

The aryldiazenido ligands provide the fourth member of the isoelectronic series CO, NO⁺, RNC, RN₂⁺ of ligands for transition metal complexes. The first aryldiazenido metal complex was reported in 1964 when p-CH₃OC₆H₄N₂Mo(CO)₂C₅H₅ was prepared by the reaction of NaMo(CO)₃C₅H₅ with p-CH₃OC₆H₄N₂⁺BF₄⁻. This review surveys the development of organometallic aryldiazenido chemistry since that time. Such organometallic aryldiazenido derivatives, including RN₂M(CO)₂C₅H₅, RN₂M(CO)₂(Pz₃BH) (M = Cr, Mo, W), [(η⁶-Me₆C₆)Cr(CO)₂N₂Ar]⁺, [(MeC₁₅H₄)M′(CO)₂N₂Ar]⁺ M′ = Mn, Re), [trans-PhN₂Fe(CO)₂(PPh₃)₂]⁺, and PhN₂M′(CO)₂(PPh₃)₂(PPh₃)₂ can be obtained by reactions of arenediazonium salts with suitably chosen transition metal nucleophiles. Analogous methods cannot be used to prepare alkyldiazenido transition metal complexes because of the instability of alkyldiazonium salts. However, the alkyldiazenido derivatives RCH₂N₂M(CO)₂C₅H₅ (R = H or Me₃Si) can be obtained from HM(CO)₃C₅H₅ and the corresponding diazoalkanes. Important aspects of the chemical reactivity of RN₂M(CO)₂Q derivatives (Q = C₅H₅, Pz₃BH) include CO substitution reactions, coordination of the second nitrogen in the RN₂ ligand to give heterobimetallic complexes such as C₅H₅Mo(CO)₂(μ-NNC₆H₄Me)(CO)₂C₅H₅, oxidative addition rections with X₂ X = Cl, Br, I), SnX₄, RSSR, and CINO, and reactions with further RN₂⁺ to give bis(aryldiazenido) derivatives (RN₂)₂MQL⁺ (L = CO, X⁻, etc.). Dearylation of an aryldiazenido ligand to a dinitrogen ligand can be effected by reaction of [(MeC₅H₄)M′(CO)₂N₂Ar]⁺ with certain nucleophiles to give (MeC₅H₄)M′(CO)₂N₂.     

Synthesis of tetramethyldisilane-bridged bis(1-indenyl) tetracarbonyl di-iron: A novel thermal rearrangement reaction between the Si-Si and Fe-Fe bonds

The title complex (Me₂SiSiMe₂)(η⁵-l-indenyl)Fe(CO)]₂(μ-CO)₂ (1) was prepared by the reaction of 1,2-bis(1-indenyl)tetramethyl-disilane and Fe(CO)₅ in refluxing heptane. Its thermal rearrangement product [Me₂Si(η⁵-1-indenyl)Fe(CO)₂]₂ (2) was also obtained from the reaction. 1 in refluxing xylene can be readily converted into 2. The crystal structures of the cis isomer 1c and the trans isomer 2t were determined by X-ray diffraction.     

Group 4 metallacarboranes of constrained geometries derived from B(cage)- and C(cage)-silylamido-substituted carborane ligands: a synthetic and structural investigation

The reactions of RNHSi(Me)₂Cl (1, R=t-Bu; 2, R=2,6-(Me₂CH)₂C₆H₃) with the carborane ligands, nido-1-Na(C₄H₈O)-2,3-(SiMe₃)₂-2,3-C₂B₄H₅ (3) and Li[closo-1-R′-1,2-C₂B₁₀H₁₀] (4), produced two kinds of neutral ligand precursors, nido-5-[Si(Me)₂N(H)R]-2,3-(SiMe₃)₂-2,3-C₂B₄H₅, (5, R=t-Bu) and closo-1-R′-2-[Si(Me)₂N(H)R]-1,2-C₂B₁₀H₁₀ (6, R=t-Bu, R′=Ph; 7, R=2,6-(Me₂CH)₂C₆H₃, R′=H), in 85, 92, and 95% yields, respectively. Treatment of closo-2-[Si(Me)₂NH(2,6-(Me₂CH)₂C₆H₃)]-1,2-C₂B₁₀H₁₁ (7) with three equivalents of freshly cut sodium metal in the presence of naphthalene produced the corresponding cage-opened sodium salt of the “carbons apart” carborane trianion, [nido-3-{Si(Me)₂N(2,6-(Me₂CH)₂C₆H₃)}-1,3-C₂B₁₀H₁₁]³⁻ (8) in almost quantitative yield. The reaction of the trianion, 8, with anhydrous MCl₄ (M=Ti and Zr) in 1:1 molar ratio in dry tetrahydrofuran (THF) at −78 °C, resulted in the formation of the corresponding half-sandwich neutral d⁰-metallacarborane, closo-1-M[(Cl)(THF)_n]-2-[1′-η¹σ-N(2,6-(Me₂CH)₂C₆H₃)(Me)₂Si]-2,4-η⁶-C₂B₁₀H₁₁ (M=Ti (9), n=0; M=Zr (10), n=1) in 47 and 36% yields, respectively. All compounds were characterized by elemental analysis, ¹H-, ¹¹B-, and ¹³C-NMR spectra and IR spectra. The carborane ligand, 7, was also characterized by single crystal X-ray diffraction. Compound 7 crystallizes in the monoclinic space group P2₁/c with a=8.2357(19) Å, b=28.686(7) Å, c=9.921(2) Å; β=93.482(4)°; V=2339.5(9) ų, and Z=4. The final refinements of 7 converged at R=0.0736; wR=0.1494; GOF=1.372 for observed reflections.     

Preparation and study of cyclic polynuclear ferrocenes derived from (C6H5)2PCH2CH2Si(CH3)2C5H4Li as a bridging ligand

The synthesis of the potential bridging ligand (C₆H₅)₂PCH₂CH₂Si(CH₃)₂C₅H₄ (3) is described. The ferrocene (6 derived from 3 has been found to form macrocyclic complexes with metal fragments NiCl₂, NiBr₂, and Co₂(CO)₆. Although monomeric, bimetallic products might have been expected based upon the reduced steric demands of ligand 3 relative to an analogous ligand, (C₆H₅)₂PCH₂Si(CH)₃)₂C₅H₄ (1), it appears that the increased flexibility in 3 is the overriding factor leading to a preference for inter- rather than intramolecular coordination of the second phosphine function in 6.     

Novel cyclopentadienyl silanes and disilanes: synthesis, structure and gas-phase pyrolysis

The new chloro(cyclopentadienyl)silanes Cp′SiH_yCl_3−y (Cp′=Me₄EtC₅, y=1: 1; Cp′=Me₄C₅H, y=1: 2; y=0: 3; Cp′=Me₃C₅H₂, y=1: 4 and pentachloro(cyclopentadienyl)disilanes Cp′Si₂Cl₅ (Cp′=Me₅C₅ 5, Me₄EtC₅ 6, Me₄C₅H 7, Me₃C₅H₂ 8, Me₃SiC₅H₄ 9) are synthesized in good yields via metathesis reactions. Treatment of 1–9 with LiAlH₄ leads under Cl–H exchange to the hydridosilyl compounds Cp′SiH₃ (Cp′=Me₄EtC₅ 10, Me₄C₅H 11, Me₃C₅H₂ 12) and to the hydridodisilanyl compounds Cp′Si₂H₅ (Cp′=Me₅C₅ 13, Me₄EtC₅ 14, Me₄C₅H 15, Me₃C₅H₂ 16, Me₃SiC₅H₄ 17). Complexes 1–17 are characterized by ¹H, ¹³C, and ²⁹Si-NMR spectroscopy, IR spectroscopy, mass spectrometry and CH-analysis. The structures of 6, 7 and 9 are determined by single-crystal X-ray diffraction analysis. Pyrolysis studies of the cyclopentadienylsilanes 10–12 and disilanes 13–17 show their suitability as precursors in the MOCVD process.     

Synthese und konformationsstudien von selen-analoga der metallocen-dithiolen-chelate früher übergangsmetalle

The reaction of the metallocene dichlorides Cp₂MCl₂ (Cp = η⁵-C₅H₅; M = Ti, Zr, Hf, Mo, W) and Cp₂′TiCl₂ (Cp′ = η⁵-C₅H₄CH₃) with equimolar amounts of dilithium-benzene-o-diselenolate, 1,2-(LiSe)₂C₆H₄, gives the chelate complexes Cp₂M(Se₂C₆H₄) (M = Ti (I), Zr (II), Hf (III), Mo (IV), W (V)) and Cp₂′Ti(Se₂C₆H₄) (VI). CpTiCl₃ reacts with 1,2-(LiSe)₂C₆H₄ to give CpTiCl(Se₂C₆H₄) (VII). The ring inversion activation parameters for I–VI can be determined by means of temperature-dependent ¹H NMR spectroscopy in solution. The fragmentation behaviour of I–VII in the mass spectrometer has been investigated by pursuing metastable transitions, using linked-scan techniques.     

Syntheses,Structures and Magnetic Properties of Two Coordination Polymers Based on 2, 2-Biphenyldicarboxylate Ligand

Two coordination polymers {[Co₃L₃(Me₂NH)₂]·(Me₂NH)}_n(1) and [CuL(bpy)]_n(2)(L=2,2'-biphenyl dicarboxylate ion, bpy=4,4'-bipyridine) were obtained and characterized. Compound 1 was synthesised via solvothermal method, with the L ligands adopting syn-syn-μ₂-η¹:η¹- and μ₂-η²-coordination modes and Co(II) centers being linked to form a 1D coordination chain with trinuclear Co₃ cluster as sub-units. Compound 2 was synthesized at room temperature, with the L ligand chelating the Cu(II) centers to form a 1D chain, which was further linked by the auxiliary 4,4'-bpy ligand to form a 3D coordination network. The results of variable temperature susceptibility studies reveal that there were ferromagnetic and antiferromagnetic interactions between the paramagnetic metal centers in compounds 1 and 2, respectively.