Monte Carlo simulation of low–medium energy electrons backscattered from C/Al double layer thin films

The backscattering coefficient of low–medium energy electron beams (from 250 to 10 000 eV) impinging on C/Al double layered thin films was investigated by a Monte Carlo simulation. The aim of the research was to study the behaviour of the backscattering coefficient as a function of the beam primary energy and the thicknesses of the two layers. The backscattering coefficient as a function of the primary energy presents features that can be used to evaluate the thicknesses of the two layers. Copyright © 2006 John Wiley & Sons, Ltd.     

Backscattered electrons from gold surface films deposited on silicon substrates: a joint experimental and computational investigation to add new potentiality to electron microscopy

This paper addresses the problem of the thickness determination of thin gold overlayers deposited on silicon bulk substrates by looking at the electron backscattering coefficient involved in scanning electron microscopy (SEM). A Monte Carlo code, used to calculate the backscattering coefficient, together with a simple experimental setup, which uses a conventional SEM, allow to determine thin film thickness (in the range 25–200 nm) with an estimated accuracy of 20%. This adds obviously new potentiality to SEM. Copyright © 2012 John Wiley & Sons, Ltd.     

不同碳链临界正烷烃对孔道中甲醇作用的Monte Carlo模拟

利用Monte Carlo(MC)方法考察了烷烃的分子尺寸与介质孔道尺寸对孔道中甲醇脱附和萃取的影响.研究表明,随孔道尺寸的增加,不同碳链的正烷烃(C5~C8)对甲醇脱附作用受孔尺寸的影响在逐渐减小;孔道尺寸不同对正烷烃萃取能力的影响程度也不相同.     

Structure and Dynamics of Confined Polymer Melts from Attractive Interaction to Repulsive Interaction Between Polymer and Smooth Wall

We studied the static and dynamic properties of unentangled polymer chains which have a variable strength of interaction with the confining smooth walls by means of the lattice Monte Carlo simulation based on the bond-fluctuation model, that is, investigated the wall-polymer interactions which systematically vary from attraction to repulsion. A critical value of attractive potential(ε_wc) is found to be -0.6k_BT, and only below it can the adsorption layer of monomers be formed near the wall. At the critical point of attraction ε_wc, attractive interaction counterba- lances the wall-polymer excluded volume effect, which minimizes the confinement effects on both chain dimension and mobility. Influences on both chain dimension and mobility increase with the increasing of either attraction or repulsion imposed by the walls. Despite of the nature and strength of the wall-polymer interaction, with the decrease of film thickness, configurations more parallelly aligned and flattened are adopted by confined chains, and a systematic trend of deceleration is found. Variations of chain dynamics with both film thickness and wall-polymer interaction can be well explained by the corresponding changes in the confinement of the nearest-neighboring particles that surround the chains. Besides, the thickness of the interfacial layer inside polymer films, where chains adopt a flattened “pancake” shape, is about two times the bulk radius of gyration and independent of the wall-polymer interaction.     

Simulation of positron and electron elastic mean free path and diffusion angle on DNA nucleobases from 10 eV to 100 keV

Positron and electron interaction collisions in living cells are efficiently simulated by Monte Carlo (MC) codes where huge data tables are needed. Present study provides detailed results of charged particles elastic interactions needed in MC on DNA nucleobases (adenine, thymine, cytosine and guanine, deoxyribose, and phosphoric acid). Indeed, electron and positron elastic cross sections, elastic mean free paths, and elastic angular distributions P(θ) are calculated from 10 eV to 100 keV using a corrected form of the independent atom method taking into account the geometry of the biomolecule. Our calculated results are compared with theoretical data available in the literature in absence of experimental data, in particular for positron. Moreover, our numerical results are presented in analytic format modeled to be used for fast sampling in the MC simulation of elastic collisions; particularly, we provide a useful analytic expression for sampling the elastic diffusion angle. For positron collisions on adenine, the relative error between numerical and analytic elastic diffusion angles is not exceeding 2% in the energy full range 10 eV to 100 keV.     

Method Development and Quantitative Elemental Analysis of Mentha Longifolia L. Leaves from Saudi Arabia by Total Reflection X-Ray Fluorescence

A method has been developed for the quantitative elemental analysis of Mentha longifolia L. leaves collected from different cities in Saudi Arabia using total reflection X-ray fluorescence. Using a microwave digestion system, 100?mg of each sample was completely digested using 3?mL of nitric acid and 2?mL of hydrogen peroxide. The stabilization of the digested samples on the silicon reflectors was studied using a silicone solution and polyvinyl alcohol. 5?µL of either silicone solution or polyvinyl alcohol (1% m/v) was pipetted and dried on the silicon reflector prior to the deposition of the digested samples. It was recognized that there is some enhancement on the intensity of the peak area with the silicone solution at photon energies less than 11?keV. However, the obtained results confirm the ability of using silicone solution or polyvinyl alcohol (1% m/v) as the stabilizer prior to the deposition of the sample droplet on the quartz reflector. However, the silicone solution was more applicable. Based on the developed method, 15 elements were quantified, namely, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, Br, Rb, Sr, and Ba. Based on the present quantitative analysis results, M. longifolia samples collected from Al-Madina city had the highest concentration of P, Cl, K, Ti, Fe, Ni, and Cu. The lowest concentrations of P, S, Cl, K, Mn, Ni, and Br were found in Taif-Shafa.     

Spatial Transition of the Electron Gas from the Active to the Remote Plasma State

Starting from the active region of a weakly ionized plasma the spatial transition of the electron gas through an adjacent field decay region into the field-free remote plasma is studied in neon on a rigorous basis by using two independent kinetic approaches. The main objective of the analysis concerns the complex features of the electron gas in its transition process from a field-driven active plasma to a purely diffusion-driven remote plasma. In addition to the energy resolved characterization of the velocity distribution, in particular, the spatial decay behavior of important, energy space averaged transport and dissipation properties of the electrons, as the density, the particle and energy fluxes and the power transfer rates to the gas particles in electron collisions, is elaborated and interpreted. Moreover, the influence of a variation of the active plasma conditions and of the spread of the field decay region on the resultant transition behavior of the electron gas is evaluated. A particular finding is that the spatial field decay is generally accompanied by a large density increase in order to allow the continuation of the electron flux by a pure diffusion process in the adjacent remote plasma. This finding could be completely confirmed by the almost perfect coincidence of corresponding results obtained by two independent kinetic approaches.     

用实验和模拟计算确定SiO2空心微球的孔径分布

用巨正则系综蒙特卡罗（GCMC）模拟方法结合统计积分方程（SIE）计算了SiO2空心微球球壳上的孔径分布（PSD）.HRTEM、XRD及氮气吸附等实验测试表明,SiO2空心微球的球壳上有无序的介孔孔道.在模拟中,基于实验数据,将SiO2空心微球模型化为具有一定孔径分布的园柱孔,流体模型化为Lennard-Jones(LJ)球,流体分子和孔壁间的相互作用采用Wang等人[10]最近提出的完全解析的势函数描述.模拟结果显示,用孔径分布拟合的吸附数据和实验吸附等温线吻合良好,说明PSD能够十分有效地表示SiO2空心微球的微孔结构.     

Isobaric thermal expansivities of polyethylenes with various crystallinities over the pressure range from 0.1 to 300 MPa and over the temperature range from 303 to 393 K

A pressure-controlled scanning calorimeter (PCSC) has been applied for measuring the isobaric volume thermal expansivities (α_p) of crystalline polymers as a function of pressure up to 300 MPa at various temperatures. The measurements have been performed for several well-defined polyethylenes with various degrees of crystallinity at 302.6, 333.0, 362.6, and 393.0 K. The results are reported as values of coefficients in a correlation equation, which facilitates the use of reported data over large ranges of temperature and pressure. The general pressure-temperature behavior of α_p for all polyethylenes under study is such that α_p increases with temperature and decreases with pressure. The increase with temperature is smaller at high pressures and the isotherms of α_p have a tendency to converge at high pressures; α_p decreases linearly with the crystallinity of the polyethylene over the whole range of pressure and temperature under investigation. From the linear approximation of experimental data for polyethylenes with various crystallinities the estimated α_p for both crystal and amorphous phases of polyethylenes have been determined as a function of pressure up to 300 MPa at 302.6, 333.0, and 362.5 K. The obtained results have been compared with available literature crystallographic data and with the values derived from the Pastine theoretical equation of state for both crystalline and amorphous phases. © 1996 John Wiley & Sons, Inc.     

Comparison of ISO-GUM and Monte Carlo methods for the evaluation of measurement uncertainty: application to direct cadmium measurement in water by GFAAS

The propagation stage of uncertainty evaluation, known as the propagation of distributions, is in most cases approached by the GUM (Guide to the Expression of Uncertainty in Measurement) uncertainty framework which is based on the law of propagation of uncertainty assigned to various input quantities and the characterization of the measurand (output quantity) by a Gaussian or a t-distribution. Recently, a Supplement to the ISO-GUM was prepared by the JCGM (Joint Committee for Guides in Metrology). This Guide gives guidance on propagating probability distributions assigned to various input quantities through a numerical simulation (Monte Carlo Method) and determining a probability distribution for the measurand.In the present work the two approaches were used to estimate the uncertainty of the direct determination of cadmium in water by graphite furnace atomic absorption spectrometry (GFAAS). The expanded uncertainty results (at 95% confidence levels) obtained with the GUM Uncertainty Framework and the Monte Carlo Method at the concentration level of 3.01 μg/L were ±0.20 μg/L and ±0.18 μg/L, respectively. Thus, the GUM Uncertainty Framework slightly overestimates the overall uncertainty by 10%. Even after taking into account additional sources of uncertainty that the GUM Uncertainty Framework considers as negligible, the Monte Carlo gives again the same uncertainty result (±0.18 μg/L). The main source of this difference is the approximation used by the GUM Uncertainty Framework in estimating the standard uncertainty of the calibration curve produced by least squares regression. Although the GUM Uncertainty Framework proves to be adequate in this particular case, generally the Monte Carlo Method has features that avoid the assumptions and the limitations of the GUM Uncertainty Framework.     

Intermetallics as zintl phases: Yb2Ga4Ge6 and RE3Ga4Ge6 (RE=Yb, Eu): structural response of a [Ga4Ge6]4- framework to reduction by two electrons

Two new intermetallic compounds, Yb(2)Ga(4)Ge(6) and Yb(3)Ga(4)Ge(6), were obtained from reactions in molten Ga. A third compound, Eu(3)Ga(4)Ge(6), was produced by direct combination of the elements. The crystal structures of these compounds were studied by single-crystal X-ray diffraction. Yb(2)Ga(4)Ge(6) crystallizes in an orthorhombic cell with a=4.1698(7), b=23.254(4), c=10.7299(18) A in the polar space group Cmc2(1). The structure of RE(3)Ga(4)Ge(6) is monoclinic, space group C2/m, with cell parameters a=23.941(6), b=4.1928(11), c=10.918(3) A, beta=91.426(4) degrees for RE=Yb, and a=24.136(2), b=4.3118(4), c=11.017(1) A, beta=91.683(2) degrees for RE=Eu. The refinement [I>2 sigma(I)] converged to the final residuals R(1)/wR(2)=0.0229/0.0589, 0.0411/0.1114, and 0.0342/0.0786 for Yb(2)Ga(4)Ge(6), Yb(3)Ga(4)Ge(6), and Eu(3)Ga(4)Ge(6), respectively. The structures of these two families of compounds can be described by a Zintl concept of bonding, in which the three-dimensional [Ga(4)Ge(6)](n-) framework serves as a host and electron sink for the electropositive RE atoms. The structural relation of RE(3)Ga(4)Ge(6) to of Yb(2)Ga(4)Ge(6) lies in a monoclinic distortion of the orthorhombic cell of Yb(2)Ga(4)Ge(6) and reduction of the [Ga(4)Ge(6)] network by two electrons per formula unit. The results of theoretical calculations of the electronic structure, electrical transport data, and thermochemical and magnetic measurements are also reported.     

Differential Contribution of Albumin and Lipids to the Hydrophobic Extraction of Bis-(2-ethylhexyl) Phthalate from Hemodialysis Tubing by Human Serum: Analysis by Gas Chromatography - Stable Isotope Dilution Mass Spectrometry

Abstract

A method is presented which allows quantitative assignment of hydrophobic human serum components to the extraction of bis-(2-ethylhexyl) phthalate (DEHP) from medical tubing. Under optimized conditions (sample pH 5.5; fluid-fluid extraction with ethyl acetate + tert-butyl methyl ether 1 + 1 v/v; DEHP-ring-D4 as internal standard with ratios of endogenous (m/z = 149) and added deuterated DEHP (m/z = 153) adjusted to around 1.0; equilibration of added internal standard with the hydrophobic sample for 24 hours), a high precision can be achieved with an intra-assay coefficient of variation of 1.5% (n = 7) for sample DEHP quantification. Phthalate migration from hemodialysis tubing was quantified by use of a peristaltic pump and recirculation (200 minutes) of serum with different degrces of hypertriglyceridemia (range from 2.26 to 14.5 g/L) or solutions of human albumin (10 to 50 g/L). Only DEHP, but no other phthalates are detected in the extracts. There exist linear relations between DEHP extraction and triglyceride content (increase by 1.01 μg DEHP/g tubing material per g triglyceride/L serum) as well as between DEHP extraction and albumin content (0.59 μg DEHP/g tubing material per g albumin/L). Under physiological conditions, the total amount of albumin extracts 17.7-fold more DEHP than the total triglyceride amount in human serum. The suitability of the proposed method as a candidate reference method as well as consequences for dyslipidemic and hypalbuminemic patients on hemodialysis schemes are discussed.     

键合4-(2-吡啶偶氮)-间苯二酚螯合树脂分离富集-火焰原子吸收法测定蔬菜中痕量镉(Ⅱ)

本文合成了Amberlite XAD-4键合4-(2-吡啶偶氮)-间苯二酚螯合树脂,并考察了其对痕量镉(Ⅱ)的吸附性能。探讨了溶液pH、洗脱剂和干扰离子等对镉(Ⅱ)分离富集的影响。树脂吸附容量为4.7mg/g,吸附的镉(Ⅱ)用5mL 2mol/L HNO3乙醇溶液洗脱,火焰原子吸收法测定。在最佳实验条件下,回收率为94.4%～97.9%,相对标准偏差在1.7%～2.7%之间。方法可用于蔬菜中镉(Ⅱ)的测定。