Design of a Large Orbit Gyrotron with a Permanent Magnet System

The paper presents results of numerical analysis and outlines the computer-aided design of a novel high-harmonic gyrotron with a beam of electrons gyrating along axis-encircling trajectories. The electron beam is formed by a novel electron-optical system (EOS) based on an electron gun of diode type with thermionic cathode and gradual reversal of the magnetic field. The results of numerical simulations predict satisfactory performance of the EOS and appropriate beam quality parameters. The tube design allows one to install different cavities optimized for excitation of TE_4,1 mode at the fourth harmonic of the cyclotron frequency or TE_3,1 mode at the third one. The target parameters of the device are: frequency about 112 GHz; output power near 1 kW and efficiency of several percent.     

Operation of a 32 GHz gyrotron

The design and operation of a 32 GHz pulsed gyrotron are reported. The device is step-tuned between the TE_1,2 (24.16 GHz) and TE_0,2 (31.78 GHz) modes with cathode voltages ranging from 30 to 40kV and beam current up to 5.0A. Experimental frequencies are in close agreement with the self-consistent calculated values and in the TE_2,2 resonator mode an output peak power of 6kW corresponding to an 18% efficiency was measured by using a fast response calorimeter with a thermal sensitivity of 0.1°C/Wmin.     

Numerical simulation of a processes in the cavity of 170 GHz/CW/1 MW gyrotron for iter

We study two versions of a gyrotron operating in the TE_28.7 and TE_31.8 modes for electron-cyclotron heating of plasma in the international thermonuclear reactor ITER. The gyrotron cavity parameters are optimized allowing for ohmic losses, dips in electron beam potential, and velocity spread. The influence of the ion compensation for the space charge, the setting of oscillations at when the gyrotron is switched on, and the competition between the operating and parasitic modes are discussed. The possibility of attaining an efficiency of 32 to 36% for a specific power of ohmic losses in the cavity of less than 2.5 kW/cm² in the TE_28.7 mode and 2 kW/cm² in the TE_31.8 mode is demonstrated. Institute of Applied Physics, Russian Academy of Sciences, Nizhny Novgorod, Russia. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 40, No. 6, pp. 788–797, June, 1997.     

W波段回旋行波管放大器的模拟与设计

回旋行波管放大器是高功率毫米波雷达发射系统最重要的候选者.通过对回旋行波管放大器中的绝对不稳定性、回旋返波振荡以及电子注-波互作用的研究，讨论了回旋行波管的稳定性、寄生模式的抑制和工作参数的优化等问题，给出了W波段TE₀₁模回旋行波管放大器的模拟设计结果.PIC粒子模拟结果表明，在电子注电压100kV、电流10A、工作磁场3.52T时，94GHz的基波回旋行波管放大器可获得大于250kW的输出功率、40dB的增益、大于25％的效率和约5％的带宽. 关键词： W波段 回旋行波管放大器 模拟 设计     

Long Pulse Operation of the THz Gyrotron with a Pulse Magnet

Long pulse operation up to 1 msec of a high frequency gyrotron with a pulse magnet has been successfully carried out in a frequency range including 1 THz. In the experiments, the timing of an electron beam pulse injection is adjusted at the top of the magnetic field pulse, where the variation of field intensity is negligible. The operation cavity modes seem to be TE_{1, 12} and TE_4,12 at the second harmonics. The corresponding frequencies are 903 GHz and 1,013 GHz, respectively. Additionally several features of radiation measurement results of the gyrotron are described and brief considerations are presented.     

Numerical Study of Processes in the Cavity of the 170 GHz Gyrotron for ITER Operating at the TE25.10 Mode

The opportunity of use of a TE_25.10 operating mode for CW 170 GHz/1 MW gyrotron for ITER is estimated. Parameters are optimized to achieve maximum efficiency of the gyrotron with an acceptable Ohmic load on the cavity. The influence of unwanted mode conversion at the output of the resonator, mode competition, electron beam potential depression, ion compensation of the space charge and beam energy recovery is investigated.     

MAGICTRAC, a novel method for conversion of whispering-gallery modes into a free-space Gaussian-like beam

A novel device, MAGICTRAC, is described for efficient conversion at millimeter wavelengths of the TE _m,n whispering-gallery mode into a linearly polarized, free-space Gaussian-like beam. MAGICTRAC uses a mode-converting waveguide taper and three mirror optics, one of which incorporates a twist reflector to linearly polarize the output beam. An example design is presented for the TE_15,2 mode at 140 GHz with a calculated efficiency of 96%. Related possible applications include (1) installation of the MAGICTRAC within the vacuum envelope of a gyrotron to separarate the spent e-beam from the generated rf, (2) generation of a whispering-gallery mode by injection of a Gaussian-like beam into the output end, and (3) conversion of TE _m,n modes into TE_0n modes for low-loss transmission in smooth-wall waveguide.Work performed by LLNL for USDOE under contract W-7405 ENG-48.     

Compact Mode Converter System for the Cold Test of Assembled Gyrotrons

A microwave system is described which allows testing of the quasi-optical mode converter in a gyrotron, which is completely assembled except for the attachment of the electron gun. Test results are presented for a TE_6,2,1 gyrotron, and a similar design for a TE_28,7,1 gyrotron is shown.     

Mode Selection for a Terahertz Gyrotron Based on a Pulse Magnet System

The TE_6,11 mode has been selected as a candidate for the second harmonic operation of a terahertz gyrotron at 1007.68 GHz. The predicted efficiency is 8.6 percent for the output power 0.38 kW. Time-dependent, multi-mode calculations have been carried out to investigate stability of a single-mode operation at second harmonic. It has been found that with the beam current 0.111 A and the magnetic field 19.282 T the second harmonic operation in the TE_6,11 mode is possible.     

A Quasi-Optical System for Converting TE0n Mode Outputs of a Gyrotron into Gaussian Beams

In this paper we present a novel design of a quasi-optical system for conversion of gyrotron outputs into Gaussian-like beams. It consists of a quasi-optical antenna, two focusing mirrors and a filter which removes the side lobes of the beam. The system is appropriate as a transmission line for frequency tunable gyrotrons operating at TE_0n mode. As an illustration of our approach, we present results which demonstrate the applicability of the developed system for conversion of the radiation generated by the Gyrotron FU IVA. The examples include conversion of three TE_0n modes (TE₀₂, 223 GHz; TE₀₃, 323 GHz; TE₀₄, 423 GHz) into Gaussian- like beams.     

Design of a Quasi-Optical System Converting the TE06 Output Mode of a Gyrotron into a Gaussian-Like Beam

Gaussian optics can be used to design a quasi-optical system converting the TE₀₆ mode output (f=388 GHz) of a submillimeter wave gyrotron into a well-collimated, linearly-polarized free-space beam with a circular cross-section. A quasi-optical antenna produces a main beam with an elliptical cross-section, which is then converted by two mirrors into a well-collimated beam with a circular cross-section.     

Electron-optical system for a large-orbit gyrotron

An electron-optical system generating a rectilinear or helical 250 keV/4 A/10 μs electron beam with a high compression factor is developed. For the former beam, a compression factor as high as 4400 and a current density of 25 kA/cm₂ are achieved. In the process of forming the helical beam, the electrons rotating about the system’s axis (paraxial beam) acquire an initial velocity in a transverse magnetic field produced by a kicker. Their pitch factor is increased to a desired (operating) value in an adiabatically growing magnetic field. In tentative experiments with the helical beam in a large-orbit gyrotron, generation was obtained at the second cyclotron harmonic (223 GHz).     

Self consistent code for a 150 GHz gyrotron

A self consistent calculation for gyrotron oscillators is described and applied to a TE₀₃ mode gyromonotron. The RF field profile satisfies a wave equation in which the AC beam current appears as a source. The wave equation is solved simultaneously with the electron equation of motion.     

Detailed Consideration of Experimental Results of Gyrotron FU CW II Developed as a Radiation Source for DNP-NMR Spectroscopy

A CW gyrotron for the sensitivity enhancement of NMR spectroscopy through dynamic nuclear polarization has been designed. The gyrotron operates at the second harmonic and frequency of 394.6 GHz with the main operating mode TE_0,6. Operating conditions of other neighboring cavity modes such as TE_2,6 at frequency of 392.6 GHz and TE_2,3 at frequency of 200.7 GHz were also considered. The experimental conditions of the gyrotron at low and high voltages are simulated. The output power of 56 watts corresponds to the efficiency of 2 percent at low voltage operation and frequency of 394.6 GHz is expected.     

Phase locking and bandwidth in a gyrotron oscillator

For imaging radar and for satelitte and space communication (e.g. NASA's deep space network), it is important that the bandwidth be as large as possible. Here we derive a formalism for computing the phase locking bandwidth that can be achieved in a gyrotron oscillator while varying the beam voltage. As an example, a second harmonic TE_02/03 gyrotron is considered. For this device, the effective bandwidth can be increased by a factor of about 3 compared with the fixed voltage case by allowing the beam voltage to change together with the input locking signal.     

波瓣波导谐振腔太赫兹回旋管的研究

以电子回旋脉塞非线性理论为基础, 结合三维电磁仿真软件, 通过导入高频场数值解替代理论解析的方法, 对波瓣波导谐振腔高次谐波太赫兹回旋管进行了理论和模拟研究. 给出了该类回旋管的起振电流、耦合系数以及注波互作用效率等重要参数, 并在此基础上设计了一只工作频率为0.4 THz, 工作模式TE₃₃模三次谐波波瓣波导谐振腔回旋管, 其电子注参数为1.0 A, 40.5 kV, 横纵速度比1.5,互作用区引导磁场为5.09 T, 输出功率达到3.3 kW.     

8mm TE13 Mode Gyrotron

The design of a 8mm TE ₁₃ mode gyrotron is given in this paper. Discussions about the selection of the dimensions of the RF structure and electron gun are presented. Calculated results of the operating parameters of the gyrotron are also given. At 37.5GHz, pulse power 56kW is obtained for the gyrotron manufactured according to our design. Mode pattern obtained by scorching method shows that the mode of the output millimeter wave is TE ₁₃.     

94GHz渐变复合腔二次谐波回旋管的设计

根据注-波互作用自洽非线性理论,编写了分析渐变复合腔的计算程序,通过该程序,获得了工作模式对为TE021-TE031的注-波互作用腔体和相关电磁参量的优化结果。应用粒子模拟软件对设计的复合腔进行了模拟,模拟与数值计算结果基本一致。根据计算结果研制了二次谐波回旋管,在加速电压57.5kV、电流10A下,测得其工作频率为94GHz,输出模式为TE01,峰值功率和效率分别为156kW和27.1%。计算、模拟和实验结果基本一致。     

Possibilities for Optimizing the Cavity of a High-Power Continuous-Wave Gyrotron

We calculated the optimal parameters of a low-Q cavity of a millimeter-wavelength continuous-wave gyrotron which ensure that the maximum efficiency is reached for a limited heat load on the cavity wall. The influence of the cavity optimization on the efficiency of energy recovery of a collector electron beam is considered. Stability of the operating mode to self-excitation of other modes is studied. Gyrotrons with radiation power 1 MW, frequency range 140–170 GHz, and operating modes TE_22.6 and TE_25.10 are studied as the example. The obtained results are generalized to gyrotrons with other operating modes and frequencies.     

双阳极回旋管磁控注入电子枪设计

对真实磁场进行拟合,根据电子光学原理以及绝热压缩理论,运用EGUN软件,设计了工作模式为TE34,19的170 GHz回旋管双阳极磁控注入电子枪。最终得到的电子注速度比约为1.3,速度零散小于3%。分析了调节磁场位置、阴阳极间距、阳极间距等因素对电子注性能的影响。结果表明:电子注的速度比和速度零散对于这些影响因子的变化比较敏感,随着阴阳极间距以及阳极间距的增加,速度比逐渐减小,速度零散先减小后增大。设计的双阳极电子枪已应用于整管实验中。