Ultrafast surface solvation dynamics and functionality of an enzyme alpha-chymotrypsin upon interfacial binding to a cationic micelle

In this contribution we report studies on enzymatic activity of alpha-chymotrypsin (CHT) upon complexation with cationic cetyltrimethylammonium bromide (CTAB) micelle. With picosecond time resolution, we examined solvation dynamics at the interface of CHT-micelle complex, and rigidity of the binding. We have used 5-(dimethyl amino) naphthalene-1-sulfonyl chloride (dansyl chloride; DC) that is covalently attached to the enzyme at the surface sites. The solvation processes at the surface of CHT in buffer solution are found to be mostly in the sub-50 ps time scale. However, at the interface the solvation correlation function decays with time constant 150 ps (65%) and 500 ps (35%), which is significantly different from those found at the enzyme and micellar surfaces. The binding structure of the enzyme-micelle complex was examined by local orientational motion of the probe DC and compared with the case without micelle. The orientational dynamics of the probe DC in the complex reveals a structural perturbation at the surface sites of CHT upon complexation, consistent with other reported structural studies. We also found possible entanglement of charge transfer dynamics of the probe DC on the measured solvation processes by using time-resolved area normalized emission spectroscopic technique. The interfacial solvation process and complex rigidity elucidate the strong recognition mechanism between CHT and the micelle, which is important to understand the biological function of CHT upon complexation with the micelle.     

Anthracene-BODIPY cassettes: syntheses and energy transfer

Compounds based on the 4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (BODIPY) framework are excellent fluorescent markers. When BODIPY dyes of this type are conjugated to functionalities that absorb at relatively short wavelengths, those functionalities can, in some molecules, transmit the absorbed energy to the BODIPY which then fluoresces. In such cases the BODIPY fragment acts as an acceptor while the other group serves as a donor. Energy transfer efficiencies in such donor-acceptor cassette systems must vary with the relative orientation of the two components, and with the structure of the linkers that attach them. This study was designed to probe these issues for the special case in which the linkers between the donor and acceptor fragments are conjugated. To do this, the cassettes 3-10 were prepared. Electrochemical studies were performed to provide insight into the degree of donor-acceptor conjugation in these systems. X-ray Crystallographic studies on single crystals of compounds 7 and 9 revealed the favored conformations of the donor and acceptor fragments in the solid state. Absorption, fluorescence, and time-resolved fluorescence spectra of the compounds were recorded, and quantum yields for the cassettes excited at the donor lambda(max) were measured. Fluorescence steady-state anisotropy data were determined for cassettes 3 and 9 to provide information about the mutual direction of the transition dipole moments.     

Simultaneous binding of minor groove binder and intercalator to dodecamer DNA: importance of relative orientation of donor and acceptor in FRET

In the present study, steady-state, picosecond time-resolved fluorescence and polarization gated anisotropy have been used to establish simultaneous binding of an intercalator (ethidium bromide, EtBr) and a minor groove binder (Hoeschst 33258, H258) to a dodecamer DNA of specific sequence. The F?rster resonance energy transfer (FRET) studies between the dyes H258 (donor) and EtBr (acceptor) in the dodecamer, where the ligands have a particular relative orientation of the transition dipoles, in contrast to the cases in sodium dodecyl sulfate (SDS) micelles and larger genomic DNA, where the orientations are random, reveal the effect of the binding geometry of the ligands in the constrained environment. Our study establishes that reconsideration of the value of the orientation factor (kappa2) is crucial for correct estimation of the donor-acceptor distance when the ligands are simultaneously bound to a specific region of biological macromolecules.     

Direct and indirect monitoring of peptide-silica interactions using time-resolved fluorescence anisotropy

The present work extends the application of time-resolved fluorescence anisotropy (TRFA) of a cationic probe rhodamine 6G (R6G) in aqueous Ludox to in situ monitoring of peptide adsorption onto the silica particles. Steady-state anisotropy and TRFA of R6G in Ludox sols were measured to characterize the extent of the ionic binding of the probe to silica particles in the presence of varying levels of tripeptides of varying charge, including Lys-Trp-Lys (KWK), N-acetylated Lys-Trp-Lys (Ac-KWK), Glu-Trp-Glu (EWE), and N-acetylated Glu-Trp-Glu (Ac-EWE). The results were compared to those obtained by direct observation of peptide adsorption using the steady-state anisotropy of the intrinsic tryptophan residue. Ionic binding of the peptides to Ludox particles produced an increase in the steady-state Trp anisotropy that was dependent on the number of cationic groups present, but the limiting anisotropy values were relatively low, indicating significant rotational freedom of the indole residue in the adsorbed peptides. On the other hand, R6G showed significant decreases in anisotropy in the presence of cationic peptides, consistent with the cationic peptides blocking the adsorption of the dye to the silica surface. Thus, R6G is able to indirectly report on the binding of peptides to Ludox particles. It was noteworthy that, while there were similar trends in the data obtained from steady-state anisotropy and TRFA studies of R6G, the use of steady-state anisotropy to assess binding of peptides overestimated the degree of peptide adsorption relative to the value obtained by TRFA. The study shows that the competitive binding method can be used to assess the binding of various biologically relevant compounds onto silica surfaces and demonstrates the potential of TRFA for probing peptide-silica and protein-silica interactions.     

Two-step resonance energy transfer between dyes in layered silicate films

Single- and two-step fluorescence resonance energy transfer (FRET) was investigated between laser dyes rhodamine 123 (R123), rhodamine 610 (R610), and oxazine 4 (Ox4). The dye molecules played the role of molecular antennas and energy donors (ED, R123), energy acceptors (EA, Ox4), or both (R610). The dye cations were embedded in the films based on layered silicate laponite (Lap) with the thickness of several μm. Optically homogeneous films were prepared directly from dye/Lap colloids. Dye concentration in the films was high enough for FRET to occur but sufficiently low to prevent the formation of large amounts of molecular aggregates. The films were characterized by absorption and fluorescence spectroscopies, and their optical properties were compared with colloid precursors and dye aqueous solutions. The phenomenon of FRET was confirmed by means of steady-state and time-resolved fluorescence spectroscopies. Significant quenching of ED emission in favor of the luminescence from EA molecules was observed. FRET led to the decrease in the lifetimes of excited states of ED molecules. Molecular orientation of dye molecules was determined by polarized absorption and fluorescence spectroscopies. Almost parallel orientation with respect to silicate surface (～30°) was determined for all fluorescent species of the dyes. Theoretical model on relationship between anisotropy and molecular orientation of the fluorophores fits well with measured data. The analysis of anisotropy measurements confirmed the significant role of FRET in the phenomenon of light depolarization.     

Validation and divergence of the activation energy barrier crossing transition at the AOT/lecithin reverse micellar interface

In this report, the validity and divergence of the activation energy barrier crossing model for the bound to free type water transition at the interface of the AOT/lecithin mixed reverse micelle (RM) has been investigated for the first time in a wide range of temperatures by time-resolved solvation of fluorophores. Here, picosecond-resolved solvation dynamics of two fluorescent probes, ANS (1-anilino-8-naphthalenesulfonic acid, ammonium salt) and Coumarin 500 (C-500), in the mixed RM have been carefully examined at 293, 313, 328, and 343 K. Using the dynamic light scattering (DLS) technique, the size of the mixed RMs at different temperatures was found to have an insignificant change. The solvation process at the reverse micellar interface has been found to be the activation energy barrier crossing type, in which interface-bound type water molecules get converted into free type water molecules. The activation energies, Ea, calculated for ANS and C-500 are 7.4 and 3.9 kcal mol(-1), respectively, which are in good agreement with that obtained by molecular dynamics simulation studies. However, deviation from the regular Arrhenius type behavior was observed for ANS around 343 K, which has been attributed to the spatial heterogeneity of the probe environments. Time-resolved fluorescence anisotropy decay of the probes has indicated the existence of the dyes in a range of locations in RM. With the increase in temperature, the overall anisotropy decay becomes faster revealing the lability of the microenvironment at elevated temperatures.     

Ultrafast photoinduced deligation and ligation dynamics: DCM in micelle and micelle-enzyme complex

We report studies on diffusion controlled deligation and ligation dynamics of a probe ligand 4-(dicyanomethylene)-2-methyl-6-(p-dimethylamino-styryl) 4H-pyran (DCM) with cationic cetyltrimethylammonium bromide (CTAB) micelles. In order to investigate the effect of spatial heterogeneity on the dynamics we study the DCM labeled micelle upon complexation with an enzyme alpha-chymotrypsin (CHT). The variation of fluorescence line-width (Gamma(t)) of DCM in the complex and also in the micelle indicates the diffusion dynamics of DCM through various environments of different polarities. The temporal behavior of Gamma(t) reveals that at 50 mM CTAB concentration the excited DCM traverses 6.5 Angstrom distance from the surface of a host micelle (deligation) before entering to a stern layer of another adjacent micelle (ligation). From neutron scattering experiment the distance 6.5 Angstrom is found to be the thickness of a stern layer of CTAB micelle. No indication of ligation has been found at 2 mM CTAB concentration as the intermicellar distance is estimated to be very large (416 Angstrom) compared to the previous case. The dynamical behavior of Gamma(t) is also indicative of significantly slower diffusion of the ligand molecules (DCM) at the surface of the micelle in presence and absence of the enzyme compared to that in the bulk buffer. We have also studied the dynamics of solvation and local geometrical restriction on the probe DCM at the micellar surface with and without CHT. With picosecond time resolution, we found time constants of the solvation relaxation processes of the DCM labeled enzyme-micelle complex to be 230 ps (45%) and 870 ps (55%), which were comparable to those of the micelle without the enzyme. The time dependent anisotropy revealing local orientational motions of the probe in the complex was also found to be similar to that of DCM at the micellar surface in absence of CHT. These studies attempt to link the dynamical features for insight into the ligand mediated intercellular communication and the biological function of the enzyme alpha-chymotrypsin upon complexation with the CTAB micelle.     

Solute rotation and solvation dynamics in an alcohol-functionalized room temperature ionic liquid

Steady-state and time-resolved fluorescence behaviors of two dipolar solutes, coumarin 153 and 4-aminophthalimide, have been studied in an alcohol-functionalized room-temperature ionic liquid, 1-(hydroxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide. The steady-state fluorescence parameters have been exploited for the estimation of the polarity of this ionic liquid and to obtain information on the hydrogen bonding interaction between the ionic liquid and the probe molecules. The time-resolved measurements have been focused on the dynamics of solvation by studying the dynamic Stokes shift in the ps-ns time scale and solute rotation by measuring the time dependence of the fluorescence anisotropy. The time-resolved anisotropy studies reveal a significant slow down of the rotational motion of one of the probe molecules. The time-dependent fluorescence Stokes shift measurements suggest that the time-resolvable part of the dynamics is biphasic in nature, highly dependent on the probe molecule and the ultrafast component is comparatively less than that in other ionic liquids. The influence of the hydrogen bonding interaction between the probe molecules and the ionic liquids on the solute rotation and the various components of the solvation dynamics is carefully analyzed in an attempt to obtain further insight into the mechanism of solvation in these novel media.     

Ultrafast proton transfer of pyranine in a supramolecular assembly: PEO-PPO-PEO triblock copolymer and CTAC

Excited-state proton transfer (ESPT) of pyranine (8-hydroxypyrene-1,3,6-trisulfonate, HPTS) is studied in a polymer-surfactant aggregate using femtosecond emission spectroscopy. The polymer-surfactant aggregate is a supramolecular assembly consisting of a triblock copolymer (PEO)(20)-(PPO)(70)-(PEO)(20) (P123) and a cationic surfactant, cetyltrimethylammonium chloride (CTAC). ESPT of the protonated species (HA) in HPTS leads to the formation of A(-). The dynamics of ESPT may be followed from the decay of the HA emission (at approximately 440 nm) and rise of the A(-) emission (at approximately 550 nm). Both steady-state and time-resolved studies suggest that ESPT of HPTS in P123-CTAC aggregate is much slower than that in bulk water, in P123 micelle, or in CTAC micelle. The ratio of the steady-state emission intensities (HA/A(-)) in P123-CTAC aggregate is 2.2. This ratio is approximately 50, 12, and 2 times higher than that respectively in water, in P123 micelle, and in CTAC micelle. Retardation of ESPT causes an increase in the rise time of the A(-) emission of HPTS. In P123-CTAC aggregate, A(-) displays three rise times: 30, 250, and 2400 ps. These rise times are longer than those in CTAC micelle (23, 250, and 1800 ps), in bulk water (0.3, 3, and 90 ps), and in P123 micelle (15 and 750 ps). The rate constants for initial proton transfer, recombination, and dissociation of the ion pair are estimated using a simple kinetic scheme. The slow fluorescence anisotropy decay of HPTS in P123-CTAC aggregate is analyzed in terms of the wobbling-in-cone model.     

Defining the different phases of premicellar aggregation using the photophysical changes of a surface-probing compound

Photophysical changes of a cylindrical compound undergoing twisted intramolecular charge transfer may be used as a surface probe to study the different phases of premicellar aggregate formation. The probe molecule, trans-2-[4-(dimethylamino)styryl] benzothiazole (DMASBT), attaches itself to the premicellar and the micellar aggregates of cationic, anionic, and neutral surfactants in different orientations because of its dipolar nature in the excited state. The micelle formation is preceded by a few typical rearrangements of the surfactant molecules. These events need proper inspection that can only be done by compounds that sense environmental changes by residing in the vicinity of the surface of those aggregates. Steady-state and time-resolved fluorescence spectroscopy coupled with steady-state fluorescence anisotropy measurements serve as a very useful tool to monitor premicellar aggregate formation. The dipolar interaction of DMASBT with the surface of the aggregate and its extraordinary capability to sense the polarity of the environment make it a very efficient molecule to use for the purpose.     

Effect of donor-acceptor interaction strength on excitation energy migration and diffusion at high donor concentrations

The migration and diffusion modulated excitation energy transfer has been studied in a new dye pair 7-diethylamino-4-methylcoumarin (donor) to 3,3'-dimethyloxacarbocyanine iodide (acceptor) by steady-state and picosecond time-resolved spectroscopy. To reduce the artifact of self-absorption, at high donor concentrations, the time-resolved studies have been carried out in thin films of polyvinyl alcohol (solid matrix) and in methanol (liquid phase) at front-face geometry of excitation. The Forster-type (nonradiative) energy transfer [Discuss. Faraday Soc. 27, 7 (1959)] takes place directly from donor to acceptor in case of solid matrix, while Yokota-Tanimoto model [J. Phys. Soc. Jpn. 22, 779 (1967)] for diffusion has been found to be operating in the liquid phase. It has been found here that the high interaction strength between donor and acceptor molecules as compared to that among donors masks the effect of energy migration and diffusion at high donor concentrations. The rate and efficiency of energy transfer increase with increasing the acceptor concentration. This has been confirmed by the study of acceptor kinetics.     

Surface-confined energy transfer in mixed self-assembled monolayers

We have fabricated a set of self-assembled monolayers consisting of naphthalene and dansyl derivatives in a range of surface loading ratios for the purpose of examining excitation transport in mixed self-assembled monolayer systems. Both tethered chromophores were immobilized on an epoxide-terminated adlayer on silica via an identical spacer, where the linking chemistry produced an amide linkage. X-ray photoelectron spectroscopy (XPS), ellipsometry, and contact angle measurements were used to characterize these chromophore-containing layers. The excitation transfer behavior of these monolayers has been examined using steady-state and time-resolved fluorescence spectroscopy. Steady-state fluorescence measurements show that excitation transfer from the naphthalene to dansyl chromophores occurs, with the efficiency of excitation transport scaling with chromophore surface loading densities, as expected. The donor lifetimes decrease with increasing acceptor loading density, and the functional form of the acceptor decay was independent of the donor/acceptor ratio. Our findings are not consistent with a homogeneous adlayer, but do provide information on the structural heterogeneity that is characteristic of these interfaces.     

In vivo synthesized proteins with monoexponential fluorescence decay kinetics

Tryptophan, when in a protein, typically shows multiexponential fluorescence decay kinetics. Complex kinetics prevents a straightforward interpretation of time-resolved fluorescence protein data, particularly in anisotropy studies or if the effect of a dynamic quencher or a resonance energy transfer (RET) acceptor is investigated. Here, time-resolved fluorescence data are presented of an isosteric tryptophan analogue, 5-fluorotryptophan, which when biosynthetically incorporated in proteins shows monoexponential decay kinetics. Data are presented indicating that the presence of a fluoro atom at the 5-position suppresses the electron transfer rate from the excited indole moiety to the peptide bond. This process has been related to the multiexponential fluorescence decay of tryptophan in proteins. The monoexponential decay of 5-fluorotryptophan makes it possible to measure simultaneously multiple distances between 5-fluorotryptophan and a RET acceptor. We demonstrate that for an oligomeric protein, consisting of two single-tryptophan-containing subunits, the individual distances between 5-fluorotryptophan and the single substrate binding site can be resolved using a substrate harboring a RET acceptor.     

Charge-transfer interactions in face-to-face porphyrin-fullerene systems: solvent-dependent luminescence in the infrared spectral region

The cyclophane-type molecular dyads 1 x 2H and 1 x Zn, in which a doubly bridged porphyrin donor adopts a close, tangential orientation relative to the surface of a fullerene acceptor, were prepared by Bingel macrocylization. The porphyrin derivatives 2 x 2H and 2 x Zn with two appended, singly linked C60 moieties were also formed as side products. NMR investigations revealed that the latter compounds strongly prefer conformations with one of the carbon spheres nesting on the porphyrin surface, thereby taking a similar orientation to that of the fullerene moiety in the doubly bridged systems. Cyclic voltammetric measurements showed that the mutual electronic effects exerted by the fullerene on the porphyrin and vice versa are only small in all four dyads, despite the close proximity of the donor and acceptor components. The steady-state and time-resolved absorption and luminescence properties of 1 x Zn and 2 x Zn were investigated in toluene solution and it was shown that, upon light excitation, both the porphyrin- and the fullerene-centered excited states are deactivated to a lower-lying CT state, emitting in the IR spectral region (lambda max = 890 and 800 nm at 298 and 77 K, respectively). In the more polar solvent benzonitrile, this CT state is still detected but, owing to its very low energy (below 1.4 eV), is not luminescent and shorter-lived than in toluene. The remarkable observation of similar photophysical behavior of 1 x Zn and 2 x Zn suggests that a tight donor-acceptor distance cannot only be established in doubly bridged cyclophane-type structures but also in singly bridged dyads, by taking advantage of favourable fullerene-porphyrin ground-state interactions.     

Photophysics and dynamics of surface plasmon polaritons-mediated energy transfer in the presence of an applied electric field

The possibility to transfer energy between molecular excitons across a metal film up to 150 nm thick represents a very attractive solution to control and improve the performances of thin optoeletronic devices. This process involves the presence of coupled surface plasmon polaritons (SPPs) at the two dielectric-metal interfaces, capable of mediating the interactions between donor and acceptor, located on opposite sides of the metal film. In this Article, the photophysics and the dynamics of an efficient SPP-mediated energy transfer between a suitable dye and a conjugated polymer is characterized by means of steady-state and time-resolved photoluminescence techniques. The process is studied in model multilayer structures (donor/metal/acceptor) as well as in electrically pumped heterostructures (donor/metal cathode/acceptor/anode), to verify the effects of applied electric fields on the efficiency and the dynamics of SPP-mediated energy transfer. A striking enhancement of the overall luminescence was recorded in a particular range of applied bias, suggesting the presence of cooperative effects between optical and electrical stimulations.     

Nonspecific protein-DNA interactions: complexation of alpha-chymotrypsin with a genomic DNA

In this contribution, we report studies on nonspecific protein-DNA interactions of an enzyme protein bovine pancreatic alpha-chymotrypsin (CHT) with genomic DNA (from salmon testes) using two biologically common fluorescent probes: 1-anilinonaphthalene-8-sulfonate (ANS) and 2,6-p-toluidinonaphthalene sulfonate (TNS). TNS molecules that are nonspecifically bound to positively charged basic residues at the surface sites, not in the hydrophobic cavities of the protein, are preferentially displaced upon complexation of TNS-labeled CHT with DNA. The time-resolved fluorescence anisotropy of TNS molecules bound to hydrophobic cavities/clefts of CHT reveals that global tumbling motion of the protein is almost frozen in the protein-DNA complex. A control study on TNS-labeled human serum albumin (HSA) upon interaction with DNA clearly indicates that the ligands in the deep pockets of the protein cannot be displaced by interaction with DNA. We have also found that ANS, which binds to a specific surface site of CHT, is not displaced by DNA. The intactness of the ANS binding in CHT upon complexation with DNA offers the opportunity to measure the distance between the ANS binding site and the contact point of the ethidium bromide (EB)-labeled DNA using the F?rster resonance energy transfer (FRET) technique. Enzymatic activity studies on CHT on a substrate (Ala-Ala-Phe 7-amido-4-methyl coumarin) reveal that the active site of the enzyme remains open for the substrate even in the protein-DNA complex. Circular dichroism (CD) studies on CHT upon complexation with DNA confirm the structural integrity of CHT in the complex. Our studies have attempted to explore an application of nonspecific protein-DNA interactions in the characterization of ligand binding of a protein in solution.     

Ultrafast relaxation dynamics of a biologically relevant probe dansyl at the micellar surface

We report picosecond-resolved measurement of the fluorescence of a well-known biologically relevant probe, dansyl chromophore at the surface of a cationic micelle (cetyltrimethylammonium bromide, CTAB). The dansyl chromophore has environmentally sensitive fluorescence quantum yields and emission maxima, along with large Stokes shift. In order to study the solvation dynamics of the micellar environment, we measured the fluorescence of dansyl chromophore attached to the micellar surface. The fluorescence transients were observed to decay (with time constant approximately 350 ps) in the blue end and rise with similar timescale in the red end, indicative of solvation dynamics of the environment. The solvation correlation function is measured to decay with time constant 338 ps, which is much slower than that of ordinary bulk water. Time-resolved anisotropy of the dansyl chromophore shows a bi-exponential decay with time constants 413 ps (23%) and 1.3 ns (77%), which is considerably slower than that in free solvents revealing the rigidity of the dansyl-micelle complex. Time-resolved area-normalized emission spectroscopic (TRANES) analysis of the time dependent emission spectra of the dansyl chromophore in the micellar environment shows an isoemissive point at 21066 cm-1. This indicates the fluorescence of the chromophore contains emission from two kinds of excited states namely locally excited state (prior to charge transfer) and charge transfer state. The nature of the solvation dynamics in the micellar environments is therefore explored from the time-resolved anisotropy measurement coupled with the TRANES analysis of the fluorescence transients. The time scale of the solvation is important for the mechanism of molecular recognition.     

Investigation of adsorption behavior and energy transfer of cationic porphyrins on clay surface at low loading levels by picosecond time-resolved fluorescence measurement

Time-resolved fluorescence and steady-state spectroscopic measurements were performed with +4-charged cationic porphyrins adsorbed on an anionic-type clay (Sumecton SA; SSA) surface at a low molecular loading level (10 % vs. cation-exchange capacity of clay) corresponding to an occupied area of ca 50 nm² per molecule. Absorption spectra indicated no interaction between transition moments of the porphyrins on the clay surface. An efficient energy-transfer process from donor to acceptor porphyrin was observed on the clay surface even under low porphyrin loading conditions. The efficiency of energy transfer obtained from the steady-state measurement was 65 %. Real-time behavior of the porphyrins was successfully captured during energy transfer. The rate constant of the energy transfer obtained from time-resolved fluorescence measurements was found to be 5.3 × 10⁸ s^?1. According to the efficiency and the rate constant, it is proposed that the adsorbed porphyrins did not have a uniform and fixed distribution.     

Orientation of a TICT probe trapped in the peripheral confined water created by ionic surfactant envelope around silver nanoparticles

Ionic surfactants are known to aggregate around the surface of a nanoparticle as a single layer in premicellar and a double layer in micellar concentrations. This motif of arrangement indicates the development of a layer of confined water of lower polarity than bulk water around the surface of the nanoparticle. We have demonstrated the behavior of a twisted intramolecular charge transfer (TICT) probe, trans-2-[4-(dimethylamino)styryl]benzothiazole (DMASBT), in the confined aqueous layer developed at the surface of spherical silver nanoparticles (Ag NPs) at and above the critical micellar concentrations (CMC) of a cationic and an anionic surfactant, namely, cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS). It is observed that the presence of charged surfactant head groups affects DMASBT differentially in the ground and the excited states. In presence of CTAB, DMASBT turns over in the excited state and interacts with the Ag NP surface, whereas in SDS the probe remains in its original orientation during the interaction. Steady-state and time-resolved fluorescence spectral studies provide enough evidence for orientation of the TICT probe in the peripheral water of Ag NP created by the surfactants. The results were confirmed by steady-state anisotropy measurements. The data show the difference between the properties of the confined peripheral water and the bulk aqueous environment. The TICT probe, DMASBT, is proved to be an excellent marker for the phenomenon.