Synthesis and use of glycosyl phosphates as glycosyl donors

Differentially protected glycosyl phosphates prepared by a straightforward synthesis from glycal precursors are used as powerful glycosyl donors. Activation of beta-glycosyl phosphates by TMSOTf at -78 degrees C achieves the selective formation of beta-glycosidic linkages in excellent yields with complete stereoselectivity. Reaction with thiols results in the conversion of glycosyl phosphates into thioglycosides in nearly quantitative yield. An orthogonal coupling strategy using glycosyl phosphate donors and thioethyl glycoside acceptors allows for the rapid synthesis of a trisaccharide.     

Solid-phase synthesis of beta-mannosides

The linkage of S-phenyl 2,3-di-O-benzyl-alpha-D-thiomannopyranoside to a cross-linked polystyrene support in the form of its 4,6-O-polystyrylborinate ester is described. The activation of this polymer-supported mannosyl donor is achieved at -60 degrees C in dichloromethane in the presence of 2,4,6-tri-tert-butylpyrimidine with the combination 1-benzenesulfinyl piperidine and trifluoromethanesulfonic anhydride. Addition of the donor alcohol at -60 degrees C followed by warming to room temperature and subsequent cleavage from the resin by gentle heating in aqueous acetone yields anomerically pure 2,3-di-O-benzyl-beta-D-mannopyranosides in excellent yield. Successful, diastereoselective coupling is demonstrated with a range of primary, secondary, and tertiary glycosyl acceptors, including typical carbohydrates and threonine derivatives.     

2-Deoxy-2-iodo- and 2-deoxy-2-bromo-alpha-glucopyranosyl trichloroacetimidates: highly reactive and stereoselective donors for the synthesis of 2-deoxy-beta-glycosides

[formula: see text] 2-Deoxy-2-iodo- and 2-deoxy-2-bromoglucopyranosyl trichloroacetimidates 8-10 and 22 are extremely useful precursors of 2-deoxy-beta-glycosides. These reactive glycosyl donors undergo highly stereoselective glycosidation reactions at -78 degrees C with a range of glycosyl acceptors using TBS-OTf as the activating agent. beta-Glycosides are obtained with > or = 19:1 selectivity in six of the seven examples reported herein.     

A new, efficient glycosylation method for oligosaccharide synthesis under neutral conditions: preparation and use of new DISAL donors

Efficient, stereoselective glycosylation methods are required for the synthesis of complex oligosaccharides as tools in glycobiology. All glycosylation methods, which have found wide acceptance, rely on Lewis acid activation of glycosyl donors prior to glycosylation. Here, we present a new and efficient method for glycosylation under neutral or mildly basic conditions. Glycosides of methyl 2-hydroxy-3,5-dinitrobenzoate (DISAL) and its para regioisomer, methyl 4-hydroxy-3,5-dinitrobenzoate, were prepared by nucleophilic aromatic substitution. In a first demonstration of their potential as glycosyl donors, stereospecific glycosylation of methanol was achieved. In the glycosylation of more hindered alcohols, the beta-donor proved more reactive, and alpha-glucosides were predominantly formed. Glycosylation of protected monosaccharides, with free 6-OH or 3-OH, proceeded smoothly in 1-methyl-2-pyrrolidinone (NMP) at 40-60 degrees C in the absence of Lewis acids and bases in good to excellent yields. Glycosylation of 3-OH gave the alpha-linked disaccharide only.     

1-Benzenesulfinyl piperidine/trifluoromethanesulfonic anhydride: a potent combination of shelf-stable reagents for the low-temperature conversion of thioglycosides to glycosyl triflates and for the formation of diverse glycosidic linkages

The combination of 1-benzenesulfinyl piperidine (BSP) and trifluoromethanesulfonic anhydride (Tf(2)O) forms a new, powerful, metal-free thiophile that can readily activate both armed and disarmed thioglycosides, via glycosyl triflates, in a matter of minutes at -60 degrees C in dichloromethane, in the presence of 2,4,6-tri-tert-butylpyrimidine (TTBP). The glycosyl triflates are rapidly and cleanly converted to glycosides, upon treatment with alcohols, in good yield and selectivity.     

Efficient Heck reactions catalyzed by a highly recyclable palladium(II) complex of a pyridyl-functionalized imidazolium-based ionic liquid

The reactions of 2-(2-pyridyl)imidazole with alkyl iodides at 25 degrees C in the presence of base gave rise to 1-alkyl-2-(2-pyridyl)imidazole. Subsequent neat reactions with alkyl or polyfluoroalkyl halides at 100 degrees C, followed by anion exchange with LiN(SO(2)CF(3))(2), generated the mono-quaternary ionic liquids. All of them have excellent thermal stability and wide liquid range. Most of the salts with asymmetric N-substituents are liquid at room temperature. The effect of N-substituent variation and symmetry on NMR, TGA and DSC is discussed. Reaction of with palladium(II) chloride produced a mononuclear palladium ionic liquid complex, the structure of which was confirmed by single-crystal X-ray diffraction analysis. The Heck cross-coupling reactions using in ionic liquid demonstrated excellent stability and recyclability.     

Synthese D'Azotures et de Benzoates de Glycosyle a Partir de Sulfites Cycliques Enc C-1, C-2

The reaction of sugars bearing a cyclic sulfite group on C-1, C-2 with azide or benzoate ions, is strereoselective and gives trans- 1,2 glycosyl azides or glycosyl benzoates with a free hydroxyle at C-2. The reaction is performed under mild conditions and gives excellent yields of glycosyl derivatives.     

S-(4-methoxyphenyl) benzenethiosulfinate (MPBT)/trifluoromethanesulfonic anhydride: a convenient system for the generation of glycosyl triflates from thioglycosides

[structure] The combination of S-(4-methoxyphenyl) benzenethiosulfinate (MPBT, 1) and trifluoromethanesulfonic anhydride forms a powerful, metal-free, thiophile which readily activates thioglycosides, via glycosyl triflates, at -60 degrees C in dichloromethane, in the presence of 2,6-di-tert-butyl-4-methylpyridine. The glycosyl triflates are rapidly and cleanly converted to glycosides, upon treatment with alcohols, in good yield and selectivity.     

Structure and synthesis of 6-(substituted-imidazol-1-yl)purines: versatile substrates for regiospecific alkylation and glycosylation at N9

X-ray crystal structures of several 6-(azolyl)purine base and nucleoside derivatives show essentially coplanar conformations of the purine and appended 6-(azolyl) rings. However, the planes of the purine and imidazole rings are twisted approximately 57 degrees in a 2-chloro-6-(4,5-diphenylimidazol-1-yl)purine nucleoside, and a twist angle of approximately 61 degrees was measured between the planes of the purine and pyrrole rings in the structure of a 6-(2,5-dimethylpyrrol-1-yl)purine nucleoside derivative. Shielding "above" N7 of the purine ring by a proximal C-H on the 6-azolyl moiety is apparent with the coplanar compounds, but this effect is diminished in those without coplanarity. Syntheses of 6-(azolyl)purines from both base and nucleoside starting materials are described. Treatment of 2,6-dichloropurine with imidazole gave 2-chloro-6-(imidazol-1-yl)purine. Modified Appel reactions at C6 of trityl-protected hypoxanthine and guanine derivatives followed by detritylation gave 6-(imidazol-1-yl)- and 2-amino-6-(imidazol-1-yl)purines. Imidazole was introduced at C6 of 2',3',5'-tri-O-acetylinosine by a modified Appel reaction, and solvolysis of the glycosyl linkage gave 6-(imidazol-1-yl)purine. Guanosine triacetate was transformed into the protected 2,6-dichloropurine nucleoside, which was subjected to S(N)Ar displacement with imidazoles at C6 followed by glycosyl solvolysis to provide 2-chloro-6-(substituted-imidazol-1-yl)purines. Potential applications of these purine derivatives are outlined.     

Electrooxidative glycosylation through C-S bond cleavage of 1-arylthio-2,3-dideoxyglycosides. Synthesis of 2',3'-dideoxynucleosides

[reaction: see text] The electrooxidative glycosylation of newly designed 1-arylthio-substituted 2,3-dideoxyglycosides is described. The halide salt-mediated electrooxidation utilizing either of the alpha- or beta-thiodideoxyglycosides proceeded smoothly at -78 degrees C to give dideoxynucleosides in a beta-selective manner, presumably through a 1-halo-substituted glycosyl donor.     

Promotion of proton conduction in polymer electrolyte membranes by 1H-1,2,3-triazole

We report 1H-1,2,3-triazole as an active group to dramatically enhance proton conduction in a polymer electrolyte membrane (PEM). The conductivities of a poly(4-vinyl-1H-1,2,3-triazole) membrane without any acidic dopants are about 105 times greater than those of poly(4-vinylimidazole) in dry air at 50-150 degrees C. Polymers with groups promoting proton conduction attached to the backbone have great potential to offer excellent mechanical properties and long-term stability. Further, 1H-1,2,3-triazole and PEMs containing 1H-1,2,3-triazole are stable in a wide potential range, implying excellent electrochemical stability under fuel cell operating conditions.     

Stereoselective direct glycosylation with anomeric hydroxy sugars by activation with phthalic anhydride and trifluoromethanesulfonic anhydride involving glycosyl phthalate intermediates

An efficient direct one-pot glycosylation method with anomeric hydroxy sugars as glycosyl donors employing phthalic anhydride and triflic anhydride as activating agents has been developed. Thus, highly stereoselective beta-mannopyranosylations were achieved by the reaction of 2,3-di-O-benzyl-4,6-O-benzylidene-D-mannopyranose (2) with phthalic anhydride in the presence of DBU at room temperature followed by sequential addition of DTBMP and Tf2O and glycosyl acceptors to the reaction mixture at -78 degrees C in one-pot. Stereoselective alpha-glucopyranosylations with 2,3-di-O-benzyl-4,6-O-benzylidene-D-glucopyranose (25) and other glycosylations with glucopyranoses and mannopyranoses having tetra-O-benzyl- and tetra-O-benzoyl protecting groups were also possible by utilizing the present one-pot glycosylation protocol. The possible mechanism for the beta-mannosylation with 2 was proposed based on the NMR study, in which alpha-mannosyl phthalate 55alpha and alpha-mannosyl triflate 59 were detected as intermediates. The versatility and efficiency of the present glycosylation methodology, especially those of the beta-mannopyranosylation protocol, were readily demonstrated by the efficient synthesis of protected beta-(1-->4)-D-mannotriose 62 and beta-(1-->4)-D-mannotetraose 67 with perfect beta-stereoselectivity.     

On the use of 3,5-O-benzylidene and 3,5-O-(di-tert-butylsilylene)-2-O-benzylarabinothiofuranosides and their sulfoxides as glycosyl donors for the synthesis of beta-arabinofuranosides: importance of the activation method

A 2-O-benzyl-3,5-O-benzylidene-alpha-d-thioarabinofuranoside was obtained by reaction of the corresponding diol with alpha,alpha-dibromotoluene under basic conditions. On activation with 1-benzenesulfinyl piperidine, or diphenyl sulfoxide, and trifluoromethanesulfonic anhydride in dichloromethane at -55 degrees C, reaction with glycosyl acceptors affords anomeric mixtures with little or no selectivity. The analogous 2-O-benzyl-3,5-O-(di-tert-butylsilylene)-alpha-d-thioarabinofuranoside also showed no significant selectivity under the 1-benzenesulfinyl piperidine or diphenyl sulfoxide conditions. With N-iodosuccinimide and silver trifluoromethanesulfonate the silylene acetal showed moderate to high beta-selectivity, independent of the configuration of the starting thioglycoside. High beta-selectivity was also obtained with a 2-O-benzyl-3,5-O-(di-tert-butylsilylene)-alpha-arabinofuranosyl sulfoxide donor on activation with trifluoromethanesulfonic anhydride. The high beta-selectivities obtained by the N-iodosuccinimide/silver trifluoromethanesulfonate and sulfoxide methods are consistent with a common intermediate, most likely to be the oxacarbenium ion. The poor selectivity observed on activation of the thioglycosides with the 1-benzenesulfinyl piperidine, or diphenyl sulfoxide, and trifluoromethanesulfonic anhydride methods appears to be the result of the formation of a complex mixture of glycosyl donors, as determined by low-temperature NMR work.     

Copper complexes of new benzodioxotetraaza macrocycles with potential applications in nuclear medicine

Two novel benzodioxotetraaza macrocycles [2,9-dioxo-1,4,7,10-tetraazabicyclo[10.4.0]1,11-hexadeca-1(11),13,15-triene (H2L1) and 2,10-dioxo-1,4,8,11-tetraazabicyclo[11.4.0]1,12-heptadeca-1(12),14,16-triene (H2L2)] were synthesized by a [1 + 1] crablike cyclization. The protonation constants of both ligands were determined by 1H NMR titration and by potentiometry at 25.0 degrees C in 0.10 M ionic strength in KNO3. The latter method was also used to ascertain the stability constants of their copper(II) complexes. These studies showed that the CuL1 complex has a much lower thermodynamic stability than the CuL2, and the H2L2 displays an excellent affinity for copper(II), due to the good fit of copper(II) into its cavity. The copper complexes of the novel ligands were characterized by electronic spectroscopy in solution and by crystal X-ray diffraction. These studies indicated that the copper center in the CuL1 complex adopts a square-pyramidal geometry with the four nitrogen atoms of the macrocycle forming the equatorial plane and a water molecule at axial position, and the copper in the CuL2 complex is square-planar. Several labeling conditions were tested, and only H2L2 could be labeled with 67Cu efficiently (>98%) in mild conditions (39 degrees C, 15 min) to provide a slightly hydrophilic radioligand (log D = -0.19 +/-0.03 at pH 7.4). The in vitro stability was studied in the presence of different buffers or with an excess of diethylenetriamine-pentaethanoic acid. Very high stability was shown under these conditions for over 5 days. The incubation of the radiocopper complex in human serum showed 6% protein binding.     

Mesoscale organization of nearly monodisperse flowerlike ceria microspheres

Nearly monodisperse flowerlike CeO2 microspheres were synthesized via a simultaneous polymerization-precipitate reaction, metamorphic reconstruction, and mineralization under hydrothermal condition as well as subsequent calcination. The obtained CeO2 microsphere consists of 20-30 nm thick nanosheets as petals. It has an open three-dimensional (3D) porous and hollow structure and possesses high surface area, large pore volume, and marked hydrothermal stability. It can be doped easily after synthesis, and the initial 3D texture is maintained. The controlling factors and a possible formation mechanism are discussed in detail. This novel material can be used as a support for catalysts with various purposes. With CuO loaded on flowerlike CeO2, the catalytic activities and hydrothermal stability of Cu/CeO2 for ethanol stream reforming were examined. At 300 degrees C, the H2 selectivity reached a maximum value of 74.9 mol %, while CO was not detected within the precision of the gas chromatogram. It produced a hydrogen-rich gas mixture in the wide temperature range (300-500 degrees C) and showed excellent hydrothermal stability at high temperature (550 degrees C), which is a good choice for ethanol processors for hydrogen fuel cell applications.     

Synthesis of 2-oxazolidinones by direct palladium-catalyzed oxidative carbonylation of 2-amino-1-alkanols

[reaction: see text] 2-Oxazolidinones 2 are obtained in excellent yields (up to 100%) and with unprecedented catalytic efficiencies (up to 2000 mol of product/mol of catalyst used) by direct PdI2/KI-catalyzed oxidative carbonylation of the readily available 2-amino-1-alkanols 1. Reactions are carried out in MeOH as the solvent at 100 degrees C using a 1/6/5 CO/O2/air mixture (60 atm total pressure at 25 degrees C).     

Efficient synthesis of Man2, Man3, and Man5 oligosaccharides, using mannosyl iodide donors

[reaction: see text] A highly efficient protocol for making Man(3) and Man(5) oligosaccharides with use of orthogonally protected glycosyl iodide donors has been developed. Glycosylation of a C-2-O-acetyl mannosyl iodide donor in the presence of silver triflate at -40 degrees C initially gave a mixture of the desired alpha-linked mannoside and an orthoacetate resulting from attack at the C-2 acetate. However, upon warming to room temperature the orthoacetate quantitatively rearranged to the desired oligosaccharide. Employing a 3,6-dihydroxy acceptor and subjecting it to double glycosidation quickly afforded high mannose sugars in nearly quantitative yields. Glycosyl iodide donors offer advantages over previously reported chloride donors as the reactions are faster, proceed in higher yields, and are not diminished in higher order constructs. These studies continue to dispel the notion that glycosyl iodides are too reactive to be of synthetic utility.     

Production and Characterization of Cellulase-Free Xylanase from <Emphasis Type="Italic">Trichoderma inhamatum</Emphasis>

The production of extracellular cellulase-free xylanase from Trichoderma inhamatum was evaluated in liquid Vogel medium with different carbon sources as natural substrates and agricultural or agro-industrial wastes. Optimal production of 244.02 U/mL was obtained with xylan as carbon source, pH 6.0 at 25 degrees C, 120 rpm, and 60-h time culture. Optimal conditions for enzyme activity were 50 degrees C and pH 5.5. Thermal stability of T. inhamatum xylanolytic complex expressed as T1/2 was 2.2 h at 40 degrees C and 2 min at 50 degrees C. The pH stability was high from 4.0 to 11.0. These results indicate possible employment of such enzymatic complex in some industrial processes which require activity in acid pH, wide-ranging pH stability, and cellulase activity absence.     

Efficient, thermally stable, second order nonlinear optical response in organic hybrid covalent/ionic self-assembled films

A covalent/electrostatic layer-by-layer self-assembly method was used to achieve polar ordering of a water soluble, reactive dye in the fabrication of nonlinear optical (NLO) films. We observed a quadratic relationship between the second harmonic intensity I2(omega) and bilayer number for all films made with Procion Brown MX-GRN, demonstrating that the polar ordering of the chromophores is consistent in each successive bilayer. As the ionic strength of the dye deposition solution was increased to 0.5 M NaCl, the of the films increased by approximately 250% to 50 x 10(-9) esu, with a corresponding average chromophore tilt angle of 38 degrees . This was attributed to increased shielding of the dye charges which led to higher chromophore density in the bilayers. The electrooptic coefficient for films of 50 bilayers fabricated at 0.5 M NaCl was 14 +/- 2 pm/V. Importantly, these films exhibited excellent thermal stability, with only a 10% decrease in (I2(omega))(1/2) after 36 h at 85 degrees C and then 24 h at 150 degrees C. Furthermore, the (I2(omega))(1/2) recovered completely upon cooling to room temperature. These results with a commodity textile dye point to the potential value of this class of reactive chromophores and this self-assembly method for fabrication of electrooptic materials at ambient conditions from aqueous solutions.     

Hydrolytic stability of organic monolayers supported on TiO2 and ZrO2

The hydrolytic stability of C18 monolayers supported on TiO2 and ZrO2 was studied. Three types of monolayers were prepared from the following octadecyl modifiers: (1) octadecyldimethylchlorosilane (C18H37Si(CH3)2Cl); (2) octadecylsilane (C18H37SiH3); and (3) octadecylphosphonic acid (C18H37P(O)(OH)2). The hydrolysis of the surfaces prepared was studied under static conditions at 25 and 65 degrees C at pH 1-10. On the basis of the loss of grafted material, the stability of the monolayers fall in the following range: C18H37P(O)(OH)2 > or = C18H37SiH3 > C18H37Si(CH3)2Cl. At 25 degrees C, monolayers from C18H37P(O)(OH)2 showed only approximately 2-5% loss in grafting density after one week at pH 1-10. The high stability of these monolayers was explained because of the strong interactions of the phosphonic acids with the substrates. Monolayers from C18H37Si(CH3)2Cl showed poor hydrolytic stability at any pH, which was explained because of the low stability of Ti-O-Si and Zr-O-Si bonds. Unlike monofunctional silanes, trifunctional silane (C18H37SiH3) yielded surfaces that showed good hydrolytic stability. This suggests that the stability of the monolayers from trifunctional silanes is primarily due to "horizontal" bonding (Si-O-Si or Si-OH...HO-Si) rather than due to bondingwith the matrix (M-O-Si). At 65 degrees C, all C18 surfaces become more susceptible to hydrolysis; however, the trend observed for 25 degrees C remained unchanged. Low-temperature nitrogen adsorption was used to study the adsorption properties of the monolayers as a function of their grafting density. The energy of adsorption interactions showed a significant increase as the grafting density of the monolayers decreased. The order of the alkyl groups in the monolayers, as assessed from CH2 stretching, decreased as the grafting density of the monolayers decreased.