PhP-PPh group bound to 1,8-positions of naphthalene: Preparation of cis isomer and synthesis of binuclear complex

A thermodynamically less stable cis isomer of 1,2-diphosphacycle was prepared from the corresponding trans isomer. Diphosphine, in which a PhP-PPh bond bridges the 1,8-positions of naphthalene, 1,2-diphenyl-1,2-dihydronaphtho[1,8-cd][1,2]diphosphole (1), was first prepared according to a previously reported method, and the trans isomer of 1 was irradiated in tetrahydrofuran with UV-vis light to reach equilibrium with cis-1 in a trans:cis ratio of 1:2. When a similar photochemical conversion was carried out using a saturated hexane solution of trans-1, cis-1 was precipitated in a good yield of 94%. The configuration of cis-1 was confirmed by X-ray analysis. Both cis- and trans-1 diphosphine ligands were used for the preparation of binuclear gold complexes. The crystal structure of (μ-cis-1)-[AuCl]₂ demonstrated that the two lone pairs of cis-1 are suitably directed for arrangement of the two gold centers in close proximity to each other. The two independent (μ-cis-1)-[AuCl]₂ molecules in the crystal were found to form a dimer through the multiple intermolecular interaction among the gold centers.     

Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Ultrasound-assisted convenient synthesis of hypolipidemic active natural methoxylated (E)-arylalkenes and arylalkanones

An ultrasound-assisted convenient method was developed for the conversion of toxic methoxylated cis-isomer of arylalkenes into its hypolipidemic active trans-isomer. Treatment of cis-isomer or mixture of all three isomers (1a-1j) with ammonium formate and 10% Pd/C gave arylalkanes (2a-2j), which upon oxidation with DDQ in anhydrous dioxane containing a little amount of silica gel, provided (E)-arylalkenes (3a-3g) in 42-72% yield depending upon the substituents attached at the aryl ring. The same method, upon addition of a few drops of water, provided hypolipidemic active arylalkanones (3h-3j) in 59-65% yield.     

Facile synthesis of 4-phenylquinolin-2(1H)-one derivatives from N-acyl-o-aminobenzophenones

An efficient synthesis of 4-phenylquinolin-2(1H)-one derivatives has been achieved in a one-pot reaction from N-acyl-o-aminobenzophenones 1a-c (a: acyl=acetyl; b: acyl=propanoyl; c: acyl=heptanoyl) using NaH as a base. Treatment of 1 with NaH provided the quinolones 2a-c with 62-83% yields, whereas the reaction in the presence of alkyl iodide (alkyl=methyl, ethyl, n-octyl) gave the corresponding N-alkylated quinolones 3a-g in 75-95% yields. The alkylation reaction of 4-phenylquinolin-2(1H)-one 2a with alkyl halide gave a mixture of N-alkylated and O-alkylated products. Comparison of IR and NMR data of the N-alkylated and O-alkylated compounds with those of 2a-c indicated that 2a-c exist as the lactam form.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

Highly stereoselective synthesis of perhydropyrano[2,3-b]pyrans from the new 3-methylidenepentane-1,5-dianion synthon

4-Phenylsulfanyl-2-(2-phenylsulfanylethyl)but-1-ene (2) is a new 3-methylidenepentane-1,5-dianion synthon which on reaction with an excess of lithium powder and a catalytic amount of DTBB (2.5%) in the presence of a carbonyl compound in THF at 0 °C, leads, after hydrolysis, to the expected methylidenic diols 3. These diols when subjected to successive hydroboration-oxidation and final oxidation, undergo spontaneous cyclisation to furnish a series of cis-perhydropyrano[2,3-b]pyrans (4) in a highly diastereoselective manner (>99% de). Acid-catalysed isomerisation of the cis-perhydropyrano[2,3-b]pyrans (4) leads, also stereoselectively, to the corresponding trans-perhydropyrano[2,3-b]pyrans (5). A discussion about the stability of 4 and 5 is also included.     

Microwave assisted synthesis of novel imidazo [2,1-b]thiazole derivative attached to quinoxalinones

3-(6-Phenylimidazo[2,1-b]thiazol-5-yl)quinoxalin-2(1H)-ones (qunoxalinone) (6a-q) have been synthesized by the reaction of ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) with suitably substituted o-phenylenediamines (5a-f) under microwave heating. The ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) were prepared by the reaction of 6-phenylimidazo[2,1-b]thiazoles (3a-e) with ethyl chlorooxoacetate in refluxing 1,4-dioxane whereas the thiazoles (3a-e) were synthesized by the reaction of 2-bromo-1-phenylethanones (2a-e) with thiazol-2-amine in refluxing acetone.     

Electrostatic forces that determine O,O-trans versus O,S-cis conformers in the aminated porphyrin complexes of Cd(N-NHCO-2-C4H3O-tpp)(OAc) and Cd(N-NHCO-2-C4H3S-tpp)(OAc)

Two new diamagnetic, mononuclear and aminated porphyrin complexes of O,O-trans-Cd (3-trans) and O,S-cis-Cd (4-cis) have been synthesized and characterized by ¹H, ¹³C NMR spectroscopy. The crystal structures of (acetato)(N-2-furancarboxamido-meso-tetraphenylporphyrinato)cadmium(II) [Cd(N-NHCO-2-C₄H₃O-tpp)(OAc); 3-trans] and (acetato)(N-2-thiophenecarboxamido-meso-tetraphenylporphyrinato)cadmium(II) [Cd(N-NHCO-2-C₄H₃S-tpp)(OAc); 4-cis] were determined. The coordination sphere around Cd²⁺ is a distorted square-based pyramid in which the apical site is occupied by a bidentate chelating OAc⁻ group for 3-trans and 4-cis. The plane of three pyrrole nitrogen atoms [i.e., N(1), N(2), N(4) for 3-trans and N(1), N(2), N(3) for 4-cis] strongly bonded to Cd²⁺ is adopted as a reference plane 3N. The N(3) and N(4) pyrrole rings bearing the 2-furancarboxamido (Fr) and 2-thiophenecarboxamido groups in 3-trans and 4-cis, respectively, deviate mostly from the 3N plane, thus orienting separately with a dihedral angle of 33.4° and of 31.0°. In 3-trans, Cd²⁺ and N(5) are located on different sides at 1.06 and −1.49 Å from its 3N plane, while in 4-cis, Cd²⁺ and N(5) are also located on different sides at 1.04 and −1.53 Å from its 3N plane. An attractive electrostatic interaction between the Cd²⁺ and O(4)⁻ atoms in furan stabilizes the O,O-trans conformer of 3. A repulsive electrostatic interaction between Cd²⁺ and S(1)⁺ destabilizes the O,S-trans conformer of 4. Both of these repulsive and the mutually attractive interactions between S(1)⁺ and O(3)⁻ atoms favor the O,S-cis rotamer of 4 both in the vapor phase and in low polarity solvents. NOE difference spectroscopy, HMQC and HMBC were employed for the unambiguous assignment of the ¹H and ¹³C NMR resonances of 3-trans and 4-cis in CDCl₃ at 20 and −50 °C.     

A new approach for the asymmetric syntheses of 2-epi-deoxoprosopinine and azasugar derivatives

A new approach to 2-epi-deoxoprosopinine 11, 1-deoxygulonojirimycin 7, and l-gulono-1,5-lactam 9 was described. The C-2 hydroxymethyl group was introduced regioselectively using SmI₂ mediated coupling of (S)-3-silyloxyglutarimide 13b with either chloromethyl benzyl ether 16a or the Beau-Skrydstrup reagent 16b, followed by debenzylation and highly cis-diastereoselective reductive deoxygenation. Adoption of the Savoi's chemoselective ring-opening alkylation method allowed a highly diastereoselective introduction of the lipid side chain of 2-epi-deoxoprosopinine 11 in a straightforward manner. Dehydration followed by highly trans-diastereoselective dihydroxylation led to polyoxygenated lactam derivative 27 as a key intermediate for the syntheses of 7 and 9.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Facile synthesis of regio-isomeric naphthofurans and benzodifurans

Naphtho[1,2-b]furans 1a-f, naphtho[2,1-b]furans 2a-f, benzo[1,2-b:5,4-b′]difurans 3a-b, benzo[1,2-b:4,5-b′]difurans 4a-b, and benzo[1,2-b:4,3-b′]difurans 5a-b were synthesized by base-catalyzed cyclization reaction of the corresponding o-alkoxybenzoylarene derivatives. The o-alkoxybenzoylarenes were obtained from the etherification reaction of the o-hydroxybenzoylarenes, which were prepared either by the reaction of methoxyarenes with benzoyl chloride in the presence of aluminum chloride or by photo-Fries rearrangement of aryl benzoates.     

Stereochemical studies—XIII: Cyclic aminoalcohols and related compounds—VI synthesis of the four 2-amino-4-t-butylcyclopentanol isomers

From diethyl 3-t-butyladipate (5), via cis- and trans-4-t-butylcyclopentene-1,2-oxide (31, 32) as key compounds, the syntheses of cis-2-amino-cis-4-t-butylcyclopentanol (1), cis-2-amino-trans-4-t-butylcyclopentanol (2), trans-2-amino-cis-4-t-butylcyclopentanol (3) and trans-2-amino-trans-4-t-butylcyclopentanol (4) have been achieved. 1, 3 and 4 were also synthesized from the corresponding 2-hydroxy-4-t-butylcarboxylic acids by Curtius degradation of the hydrazides (11, 18, 19). The steric course of process leading to the above compounds is discussed.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Chemo enzymatic synthesis of Rengyol and Isorengyol

Cyanohydrins 2 of O-protected 4-hydroxycyclohexanones 1 are excellent starting compounds for the synthesis of Isorengyol (I) and Rengyol (II). The cyano group of the O-benzyl derivative 2d is first converted into the corresponding aldehyde 4, which via Wittig olefination led to the vinyl compound 6. Hydroboration of the trans-derivative (trans-6) leads, after debenzylation, to Isorengyol, whereas hydroboration and debenzylation of the cis-isomer (cis-6) gives Rengyol. With hydroxynitrile lyases (HNLs) as catalysts the stereoselective preparation of cis- as well as trans-cyanohydrin 2d is possible, which enables the selective preparation of Isorengyol or Rengyol, respectively. The trans-configuration of Isorengyol and the cis-configuration of Rengyol were secured by X-ray crystal structure analysis.     

A new class of azobenzene chelators for Mg and Ca in buffer at physiological pH

A new class of azobenzene-based chelators, trans-3a and trans-3b (3a and 3b), were designed and synthesized in two steps. Both 3a and 3b were readily dissolved in a buffer solution at physiological pH. The values of the dissociation constant of 3a and 3b for Mg²⁺ and Ca²⁺ were determined by the Hills plot; K_d^Mg=1.12 mM and K_d^Ca=660 μM for 3a and K_d^Mg=158 μM and K_d^Ca=200 μM for 3b, respectively. On irradiation at 489 nm light, 3a isomerized to give cis-form, which underwent cis-to-trans thermal isomerization in darkness at room temperature. The change in the absorption spectrum of the irradiated solution of 3a in the presence of Mg²⁺, showing the cis-to-trans thermal isomerization, indicates that the affinity of cis-3a for Mg²⁺ is lower than that of 3a.     

An efficient substituent dependent synthesis of congested pyridines and pyrimidines

An efficient and versatile synthesis of various congested pyridines 3a-h, 6a,b, 8a-n, 10a-g, and 16a,b, and (pyrimidin-4-yl)acetonitriles 13a-g has been delineated by base catalyzed ring transformation of suitably functionalized 2H-pyran-2-ones 1a-h, 5, 7, and 15 by formamidine acetate 2a, acetamidine hydrochloride 2b, S-methylisothiourea 9a, pyrazol-1-yl-carboxamidine 9b, and arylamidine hydrochloride 12 separately in the presence of powdered KOH in dry DMF.     

Stereochemical substituent effects: investigation of the cyano, amide and carboxylate group

Three pairs of diastereomeric piperidines, cis- and trans-2-methylpiperidine-3-carboxylate (6a and 6b), cis- and trans-2-methylpiperidine-3-carboxylamide (9a and 9b) and cis- and trans-2-methyl-3-cyanopiperidine (11a and 11b), were synthesised for the purpose of investigating the effect of the axial versus equatorial carboxylate, carboxamide and cyano group on piperidine base strength. The pK_a values of the six compounds were determined to be 11.0 (6a), 10.4 (6b), 9.5 (9a), 9.3 (9b), 7.8 (11a) and 8.0 (11b). This shows that the strong electron-withdrawing effect of the cyano group and the effect of the amide group are relatively independent of spacial orientation. The carboxylate, on the other hand is considerably less electron-withdrawing when axial.     

The first asymmetric synthesis of all four isomers of cis- and trans-3,4-dihydroxy-3,4-dihydromollugin

Asymmetric synthesis of all the four stereoisomers of cis-3,4-dihydroxy-3,4-dihydromollugins 4 and 6 and trans-3,4-dihydroxy-3,4-dihydromollugins 5 and 7 was achieved. The O-methoxymethyl mollugin derivatives were dihydroxylated to (−)- and (+)-cis-3,4-dihydroxy-3,4-dihydromollugin derivatives using both AD-mix-α and AD-mix-β. Deprotection of the MOM-ethers of cis-dihydroxy compounds resulted in the targeted stereoisomers (−)-(3R,4R)-cis-3,4-dihydroxy-3,4-dihydromollugin 4, (−)-(3R,4S)-trans-3,4-dihydroxy-3,4-dihydromollugin 5, (+)-(3S,4S)-cis-3,4-dihydroxy-3,4-dihydromollugin 6 and (+)-(3S,4R)-trans-3,4-dihydroxy-3,4-dihydromollugin 7. These routes were paved with difficulties, for example, incompatibility of the substrates with AD-mixes, the unexpected formation of trans-dihydroxy compounds and failures in deprotection protocols.     

Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines

Two new types of pyrido-fused tris-heterocycles (1a,b and 2a,b) have been prepared from 3-aminopyridine in five/six steps. A synthetic strategy for the preparation of the novel pyrido[3,4-b]thieno[2,3- and 3,2-d]pyrroles (1a,b) and pyrido[4,3-e]thieno[2,3- and 3,2-c]pyridazines (2a,b) has been studied. The Suzuki cross coupling of the appropriate 2- and 3-thienoboronic acids (3,4) and 4-bromo-3-pyridylpivaloylamide (9) afforded the biaryl coupling products (10,11) in high yields (85%). Diazotization of the hydrolysed (2-thienyl)-coupling product (12) and azide substitution gave the 3-azido-4-(2-thienyl)pyridine intermediate (72%, 14). 3-Azido-4-(3-thienyl)pyridine (15) was prepared by exchanging the previous order of reactions. The desired β-carboline thiophene analogues (1a,b) were obtained via the nitrene by thermal decomposition of the azido precursors (14,15). By optimising conditions for intramolecular diazocoupling, the corresponding pyridazine products (72-83%, 2a,b) were afforded.     

The first methyl antimony linked dimeric tetrathiafulvalene and tetraselenafulvalenes

In quest of novel organic donors, dimeric tetrathiafulvalene (TTF) and tetraselenafulvalenes (TSFs) linked by a single or double methyl antimony bridge, MeSb(TTF)₂ (1), (MeSb)₂(TSF)₂ (cis-2 and trans-2), and MeSb(TSF)₂ (3), have been synthesized. Singly bridged 1 and 3 show three pairs of redox waves, whereas doubly bridged cis-2 and trans-2 show two pairs of redox waves similarly to TSF. The X-ray structural analyses of neutral crystals, 1, cis-2 and trans-2, have succeeded. In their structures, antimony and chalcogen atoms form close intermolecular contacts useful in constructing supramolecular networks.