Synthesis, characterization and crystal structures of boron-containing intermediates in the reductive amination of ferrocenecarboxaldehyde to a bis(ferrocenylmethyl) amine

Reaction of ferrocenecarboxaldehyde with aqueous methylamine leads to [(methylimino)methyl]ferrocene, which is reduced to N-(ferrocenylmethyl)-N-methylamine by NaBH₄. This amine reacts with ferrocenecarboxaldehyde and NaCNBH₃ to give the tertiary ammonium salt, di(N-(ferrocenylmethyl))-N-methylammonium cyanoborohydride. Hydrolysis of the NaCNBH₃ reaction mixture produces the free amine, di(N-(ferrocenylmethyl))-N-methylamine. Thermolysis of di(N-(ferrocenylmethyl))-N-methylammonium cyanoborohydride in refluxing tetrahydrofuran converts it to the cyanoborane adduct, di(N-ferrocenylmethyl)-N-methylamine-cyanoborane, with elimination of H₂. The new compounds are fully characterized by using spectroscopic and physical methods, including X-ray crystal structure determinations of di(N-(ferrocenylmethyl))-N-methylammonium cyanoborohydride, di(N-(ferrocenylmethyl))-N-methylamine, and di(N-(ferrocenylmethyl))-N-methylamine-cyanoborane.     

Electrocatalytic reduction of carbon dioxide by a polymeric film of rhenium tricarbonyl dipyridylamine

A dipyridylamine ligand with a pendant pyrrole (N-(3-N,N′-bis(2-pyridyl)propylamino)pyrrole, PPP) and its corresponding rhenium(I) complex, Re(CO)₃(κ²-N,N-PPP)Cl, were synthesized. The structure of Re(CO)₃(κ²-N,N-PPP)Cl was determined by X-ray crystallography. Electrochemical polymerization of the pyrrole moiety resulted in the immobilization of poly[Re(CO)₃(κ²-N,N-PPP)Cl] film onto a glassy carbon electrode, which exhibited electrocatalytic activity for the reduction of CO₂ to CO.     

First enantioselective synthesis of the novel antiinfective TAN-1057A via its aminomethyl-substituted dihydropyrimidinone heterocycle

Enantiomerically pure N²-Z-N²-MeAsnOH [(S)-14], prepared in 8 steps (23% overall yield) from asparaginic acid, was first subjected to a Hofmann degradation with PhI(OCOCF₃)₂ yielding (S)-N²-Z-N²-methyl-2,3-diaminopropanoic acid [N²-Z-N²-Me-L-A₂pr, (S)-15], and this in turn was protected to give N²-Z-N³-Boc-N²-Me-L-A₂pr [(S)-17]. Condensation of (S)-17 with HNC(SMe)NHCONH₂ followed by removal of the tert-butoxycarbonyl protecting group, cyclization and hydrogenolytic removal of the Z-group gave the heterocycle of TAN-1057A [(S)-1] with an e.e. of 87 in 36% yield [from (S)-14]. Coupling of (S)-1 with (S)-tris-Z-β-homoarginine (20a) in the presence of O-(7-azabenzotriazol-1-yl)-N,N,N′,N′-tetramethyluronium hexafluorophosphate (HATU) and iPr₂NEt in N,N-dimethylacetamide followed by hydrogenolysis afforded the most active A-diastereomer of the natural antibiotic TAN-1057 in 52% yield (from (S)-1 and 20a). Similarly, starting from (S)-1, a single diastereomer of the potent, less toxic TAN-1057A analogue 22b with a β-lysine side chain has been prepared. All described synthetic steps do not require column chromatography for purification of the products.     

Cu(N-N)2Cl2 and Cu(N-N-N)Cl2 and HgCl2 building blocks in the synthesis of coordination compounds—X-ray studies and magnetic properties

A series of complexes containing Cu(N-N)₂Cl₂ (N-N=bis(pyrazol-1-yl)methane (bpzm), bis(3,5dimethylpyrazol-1-yl)methane (bdmpzm), 2,2-dipyridylamine (dpa), 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) and 2,2′-bipyridine (bipy)), Cu(N-N-N)Cl₂ (N-N-N=2,2′:6′,2″-terpyridine (terpy)) and HgCl₂ building blocks have been synthesized and structurally characterized. Increase in structural dimensionality is observed for [Cu(bpzm)₂][HgCl₄], [Cu(dpa)₂][HgCl₃]₂ and [Cu(terpy)(μ-Cl)HgCl₃] compounds. No coordination polymers have formed in the case of bis(3,5dimethylpyrazol-1-yl)methane, 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine and 2,2′-bipyridine. The [Cu(bpzm)₂][HgCl₄] and [Cu(terpy)(μ-Cl)HgCl₃] complexes have been studied by magnetic measurements.     

Addition of allyltrichlorostannanes to aldehydes: application in the synthesis of 4-N-Boc-amino-3-hydroxy ketones

We wish to describe here the diastereoselective reaction between chiral N-Boc-α-amino aldehydes and achiral allyltrichlorostannanes leading to 1,2-syn-N-Boc-α-amino alcohols, which are treated with catalytic amounts of OsO₄ in the presence of NaIO₄ to provide the corresponding 4-N-Boc-amino-3-hydroxy ketones.     

Practical and highly stereoselective method for the preparation of several chiral arylsulfinamides and arylsulfinates based on the spontaneous crystallization of diastereomerically pure N-benzyl-N-(1-phenylethyl)-arylsulfinamides

A novel and simple process for the preparation of enantiomerically pure (S_S)-benzenesulfinamide (S_S)-3a, (S_S)-p-toluenesulfinamide (S_S)-3b, (S_S)-p-chloro-benzenesulfinamide (S_S)-3c and (S_S)-p-fluorobenzenesulfinamide (S_S)-3d has been developed. The treatment of arylsulfinyl chlorides with (R)-N-benzyl-1-phenylethanamine in the presence of excess triethylamine gave diastereomeric mixtures of N-benzyl-N-(1-phenylethyl)-arylsulfinamides 1, which underwent spontaneous crystallization to furnish diastereomerically pure (R,S_S)-N-benzyl-N-(1-phenylethyl)-arylsulfinamides (R,S_S)-1a-1d in 28%, 29%, 27% and 31% yields, respectively. The diastereomerically pure compounds (R,S_S)-1 were then converted into four enantiopure (R_S)-methyl arylsulfinates (R_S)-2, and finally into four enantiopure (S_S)-arylsulfinamides (S_S)-3 in good yields.     

Regioselective N-alkylation of imidazo[4,5-b]pyridine-4-oxide derivatives: an experimental and DFT study

Regioselectivities were determined for N-alkylations of imidazo[4,5-b]pyridine-4-oxide and 2-methyl-imidazo[4,5-b]pyridine-4-oxide with benzyl bromide or benzyl iodide at RT using K₂CO₃ in DMF as a base. Experimental attempts have shown that N-1/N-3 ratios slightly varied according to the substitution on C-2 position. This was confirmed by DFT calculations in solvent phase. This computational study has shown first that this N-benzylation reaction passed through a S_N2 mechanism. Moreover, regioselectivity of N-benzylation has appeared essentially governed by ‘steric approach control’. It explained that opposite N-1/N-3 ratios were obtained with imidazo[4,5-b]pyridine-4-oxide and its 2-methyl-substituted analog. Finally, regioselectivities slightly varied with the nature of benzyl halide.     

Synthesis of N,N-Ac,Boc laurylthio sialoside and its application to O-sialylation

The combination of the 5-N-tert-butoxycarbonyl (Boc) group of laurylthio sialoside and cyclopentyl methyl ether (CPME) as a solvent enhanced the reactivity and α-selectivity of the sialyl donor during sialylation. Selective deprotection of the N-Boc group of sialoside, including an acid-sensitive isopropylidene function, was successfully achieved by Yb(OTf)₃-SiO₂. Transformation of N,N-Ac,Boc into an N-acetylglycolyl group of sialoglycoside was easily performed via selective N-deacylation of the mixed Ac-N-Boc carbamate, subsequent Boc group removal, and acylation.     

One-pot asymmetric synthesis of α-trifluoromethylated amines from α-trifluoromethyl ketones

Diastereoselective reduction of (Rs)-N-tert-butanesulfinyl α-trifluoromethyl ketimines formed in situ from the corresponding α-trifluoromethyl ketones and N-tert-butanesulfinamide has been achieved, and either diastereomer of N-tert-butanesulfinyl α-trifluoromethyl amines was obtained in good yields with excellent diastereoselectivities (up to 99:1 dr) using NaBH₄ and L-Selectride as the reductants, respectively.     

An efficient procedure for the synthesis of 2-N-Boc-amino-3,5-diols

We wish to describe here the diastereoselective reaction between chiral N-Boc-α-amino aldehydes with both achiral allyltrichlorostannanes leading to 1,2-syn-N-Boc-α-amino alcohols, which are easily converted to the corresponding 4-N-Boc-amino-3-hydroxy ketones after treatment with catalytic amounts of OsO₄ in the presence of NaIO₄. After reduction of the carbonyl function, these 4-N-Boc-amino-3-hydroxy ketones were converted to 1-deoxy-5-hydroxy sphingosine analogues.     

N-tripodal ligands to generate copper catalysts for the syndiotactic polymerization of methyl-methacrylate: Crystal structures of copper complexes

A library of N-tripodal ligands, based on a central nitrogen atom connected to three different functionalized arms, was investigated via a parallel approach for the polymerization of methyl-methacrylate (MMA) in presence of late transition metal salts. Copper salts CuCl₂ and Cu(OAc)₂ in combination with N-(2-furanylmethyl)-N-(1-3,5-dimethyl-1H-pyrazolylmethyl)-N- (phenylmethyl)amine were detected as efficient catalysts for the syndiotactic polymerization of MMA ([rr] up to 78%). Kinetic studies and X-ray structures of the best catalysts were reported.     

Asymmetric synthesis of phosphonotrifluoroalanine and its derivatives using N-tert-butanesulfinyl imine derived from fluoral

Addition of dialkyl phosphites to (S)-N-tert-butanesulfinyl imine derived from fluoral afforded, under mild conditions, the corresponding N-tert-butanesulfinyl α-aminophosphonates in moderate to high yields and diastereoselectivity. The major diastereomers of N-tert-butanesulfinyl α-aminophosphonates of (S_S,S) configuration were isolated, and after partial or complete deprotection, converted into enantiomerically pure phosphonotrifluoroalanine and its dialkyl esters.     

Mixed N-heterocycles/N-heterocyclic carbene palladium(II) allyl complexes as precatalysts for direct arylation of azoles with aryl bromides

A series of mixed N-heterocycles/N-heterocyclic carbene palladium(II) allyl complexes with general formula [(NHC)Pd(η³-allyl)]₂(μ₂-N-heterocycles)(BF₄)₂ were prepared in one pot based on anion metathesis of (NHC)Pd(η³-allyl)Cl complexes and then ligand replacement with N-heterocycles [N-heterocycles?=?pyrazine (pyz), 4,4′-bipyridine (bpy) and trans-4,4′-bipyridylethylene (bpe)]. The solid-state structures shown dinuclear structures with two palladium(II) centers holding together by bridged N-heterocycles. Initially investigation of the obtained complexes as precatalysts for direct CH bond arylation of azoles with aryl bromides was carried out.     

Preparation and structures of 6- and 7-coordinate salen-type zirconium complexes and their catalytic properties for oligomerization of ethylene

A series of salen-type zirconium complexes of the general formula LZrCl₂ (L = N,N′-ethylenebis(salicylideneiminate), 3a; N,N′-ethylenebis(3,5-di-tert-butylsalicylideneiminate), 3b; N,N′-ethylenebis(5-methoxysalicylideneiminate), 3c; N,N′-ethylenebis(5-chlorosalicylideneiminate), 3d; N,N′-ethylenebis(5-nitrosalicylideneiminate), 3e; N,N′-o-phenylenebis(salicylideneiminate), 4a; N,N′-o-phenylenebis(3,5-di-tert-butylsalicylideneiminate), 4b; N,N′-o-phenylenebis(5-methoxysalicylideneiminate), 4c; N,N′-o-phenylenebis(5-chloro-salicylideneiminate), 4d) were prepared. The crystal structures of 6- and 7-coordinate zirconium complexes 4b and [4b · OCMe₂] were determined by X-ray crystallography, which reveals that a salen-type zirconium complex possesses a labile coordination site on the Zr center with a relatively stable framework and that the coordination and the dissociation of O-donor molecules occur readily at this site. The catalytic properties of 3(a-e) and 4(a-d) were studied for ethylene oligomerization in combination with Et₂AlCl as co-catalyst. Complex 3c featuring a methoxy-substituted salen ligand displayed higher activity than its analogous precursors having chloro and nitro groups as substituents. The catalytic reactions by 3(a-e) and 4(a-d) gave C₄-C₁₀ olefins and low-carbon linear α-olefins in good selectivity.     

Activite optique de polyamines tertiaires du type poly[thio-(N-R1-N-R2 aminomethyl)-1 ethylene]

Ultra-violet, ORD and CD spectra of (?)poly[thio1-(N-N-diethylaminomethyl) ethylene] (Ia) prepared by stereoelective polymerization of racemic N-N-diethyl-N-(thiirane-2-ylmethyl) amine using ZnEt₂-(—) 3-3-dimethyl-1,2 butanediol as initiator system, of (+)poly[thio1-(N-N-diethyl aminomethyl) ethylene] obtained from a partially resolved enantiomer using ZnEt₂-CH₃OH as initiator system, of poly[thio1-(N-methyl-N-sec-butyl aminomethyl) ethylene] and of poly[thio1-(N-methyl-N-(1-phenylethyl) aminomethyl) ethylene] in organic solvents (tertiary amine form) and in water (hydrochloride form) are described. Observed Cotton effects are associated with electronic transitions of chromophores by comparison with model molecules: N-methyl2-aminobutane, ethyl-thio-2-methylbutane and polypropylene sulfide. For polyamine (Ia), their contributions to optical rotatory powers in the visible are evaluated after decomposition of corresponding CD curves in Gaussian partial Cotton effects. The effects of other optically active electronic transitions located below 180 nm are deduced by difference. Influence of positions of chromophores with regard to chiral centers and of the protonation of nitrogen atoms on observed Cotton effects are discussed.     

Copper(I) complexes of heterocyclic thiourea ligands

The coordination of heterocyclic thiourea ligands (L = N-(2-pyridyl)-N′-phenylthiourea (1), N-(2-pyridyl)-N′-methylthiourea (2), N-(3-pyridyl)-N′-phenylthiourea (3), N-(3-pyridyl)-N′-methylthiourea (4), N-(4-pyridyl)-N′-phenylthiourea (5), N-(2-pyrimidyl)-N′-phenylthiourea (6), N-(2-pyrimidyl)-N′-methylthiourea (7), N-(2-thiazolyl)-N′-methylthiourea (8), N-(2-benzothiazolyl)-N′-methylthiourea (9), N,N′-bis(2-pyridyl)thiourea (10) and N,N′-bis(3-pyridyl)thiourea (11)) with CuX (X = Cl, Br, I, NO₃) has been investigated. CuX:L product stoichiometries of 1:1–1:5 were found, with 1:1 being most common. X-ray structures of four 3-coordinate mononuclear CuXL₂ complexes (CuCl(6)₂, CuCl(7)₂, CuBr(6)₂, and CuBr(9)₂) are reported. In contrast, CuBr(1)₂ is a 1D sulfur-bridged polymer. CuIL structures (L = 7, 8) are 1D chains with corner-sharing Cu₂(μ-I)₂ and Cu₂(μ-S)₂ units, and CuCl(10) is a 2D network having μ-Cl and N-/S-bridging L. Two [CuL₂]NO₃ structures are reported: a mononuclear 4-coordinate copper complex with chelating ligands (L = 10) and a 1D link-chain with N-/S-bridging L (L = 3). Two ligand oxidative cyclizations were encountered during crystallization. CuI crystallized with 6 to produce zigzag ladder polymer [(CuI)₂(12)]·½CH₃CN (12 = N-(pyrimidin-2-yl)benzo[d]thiazol-2-amine) and CuNO₃ crystallized with 10 to form [Cu₂(NO₃)(13)₂(MeCN)]NO₃ (13 = dipyridyltetraazathiapentalene).     

N-doped NaTaO_3 synthesized from a hydrothermal method for photocatalytic water splitting under visible light irradiation

NaTaO_(3-x)N_x catalysts were synthesized by a hydrothermal(H) and a solid-state(S) methods in this study.The H-and S-NaTaO_(3-x)N_x samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), UV–visible(UV–vis) diffuse reflectance spectroscopy, and photoluminescence(PL) spectroscopy. The XRD patterns of the H-and S-samples showed peaks indexed to the pure phase of perovskite NaTaO_3 and minor peaks assignable to Ta_3N_5 at various synthesis temperatures. Substitution of oxygen by nitrogen ions causes the light absorption of the H-and S-NaTaO_(3-x)N_x samples to be extended to the 600–650 nm region, thus making the samples visible-light active. The NaTaO_(3-x)N_x samples exhibited photocatalytic activity for H_2 and O_2 evolution from aqueous methanol and silver nitrate solutions under visible-light irradiation. The UV–vis and PL spectra of the Hand S-catalysts revealed the presence of cationic vacancies and reduced metallic species, which acted as recombination centers. These results demonstrated that the preparation method plays a critical role in the formation of defect states, thereby governing the photocatalytic activity of the NaTaO_(3-x)N_x catalysts.     

Facile synthesis of thermoresponsive block copolymers of N-isopropylacrylamide using heterogeneous controlled/living nitroxide-mediated polymerizations in supercritical carbon dioxide

A new protocol for preparation of thermoresponsive poly(N-isopropylacrylamide, NIPAM) containing block copolymers is described. It involves two successive heterogeneous controlled/living nitroxide-mediated polymerizations (NMPs) in supercritical carbon dioxide (scCO₂) using N-tert-butyl-N-[1-diethylphosphono-(2,2-dimethylpropyl)]nitroxide (SG1), as the nitroxide. Precipitation NMPs give narrow dispersity macroinitiators (MIs), and a first report of the controlled/living polymerization of N,N-dimethylacrylamide (DMA) in scCO₂ is described. The MI is then used in an inverse suspension NMP of NIPAM in scCO₂ resulting in the efficient preparation of block copolymers containing DMA, tert-butyl acrylate and styrene. Aqueous cloud point temperature analysis for poly(DMA)-b-poly(NIPAM) and poly(acrylic acid)-b-poly(NIPAM) shows a significant dependence on poly(NIPAM) chain length for a given AB block copolymer.     

碱土金属掺杂对钴基尖晶石复合金属氧化物催化分解N_2O性能的影响

采用共沉淀法制备碱土金属掺杂的钴基尖晶石型复合金属氧化物M_xCo_(3-x)O_4(M=Mg、Ca、Sr、Ba;x=0、0.1、0.3、0.5、0.7、0.9)催化剂,使用XRD、SEM、氮吸附、H_2-TPR、O_2-TPD-M S和XPS等技术对催化剂进行表征,并在固定床微型反应器中评价了M_xCo_(3-x)O_4催化剂催化分解N_2O的活性,研究了碱土金属掺杂对其催化性能的影响。结果表明,碱土金属掺杂后,M_(x )Co_(3-x)O_4催化剂颗粒粒径减小,比表面积增大,表面吸附氧和Co~(2+)数量增加,氧化还原性能增强;在反应气组成为0.68%N_2O,3%O_2,Ar为平衡气的条件下,碱土金属锶掺杂、掺杂量x为0.7时,Sr_(0.7)Co_(2.3)O_4的N_2O分解催化活性最高,N_2O转化率为10%和95%时所需的温度分别为312和451℃。