Copper-catalyzed arylation of phenylurea using KF/Al2O3

A mild and efficient method for the copper-catalyzed arylation of phenylurea is described. The coupling reaction of phenylurea with different functionalized aryl iodides in the presence of air stable CuI, N,N′-dibenzylethylenediamine as a ligand, and KF/Al₂O₃ as a base gives symmetrical and unsymmetrical diarylureas in relatively high yields.     

FeCl3·6H2O oxidation of protected resveratrol for the synthesis of tetraarylfuran-type oligostilbenes

Several 8-8-coupled tetraarylfuran-type oligostilbenes were prepared through FeCl₃·6H₂O-catalyzed regioselective oxidative couplings of protected resveratrol precursors. The global deprotection of the coupling dimers in a one-pot reaction yielded (±)-pallidol instead of the targets (±)-restrytisol B and (±)-tricuspidatol A.     

Trends in 19F-19F and 29Si-19F coupling constants in organosilicon derivatives containing SiF2 and Si2F4 units

Consideration of ¹⁹F-¹⁹F and ²⁹Si-¹⁹F coupling constants in a series of organosilicon derivatives containing SiF₂ and Si₂F₄ units reveals a number of trends which are useful for structural and stereochemical assignments. For example the vicinal ¹⁹F-¹⁹F coupling constants in a number of CSiF₂SiF₂C- derivatives (including straight chain compounds, disilacyclobutanes and disilacyclohexanes) show an apparent linear dependence on dihedral angle, varying in magnitude from near zero for small values of φ up to ca. 19 Hz for φ ～ 180°. This is particularly useful for stereochemical assignments [1,2]. In addition ²⁹Si-¹⁹F coupling constants appear to fall in quite distinct ranges (¹J_SiF > 300 Hz, 29 Hz < ²J_SiF < 55 Hz, ³J_SiF < 10 Hz). This is quite useful for structural assignments [1,6]. Reaction of SiF₂ with 1,3-cyclohexadiene gives two new silicon fluorine compounds: a disilabicyclo[2,2,2]octene and an HSi₂F₅-substituted cyclohexadiene.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Synthesis and structure of the edge-bridged open zirconocene, Zr(6,6-dmch)2(PMe3)2 (dmch=dimethylcyclohexadienyl), and its imine coupling product

The reaction of ZrCl₄ with four equivalents of the 6,6-dimethylcyclohexadienyl anion (6,6-dmch⁻) in the presence of PMe₃ leads to the 18 electron Zr(6,6-dmch)₂(PMe₃)₂. This complex was found to undergo a coupling reaction with two equivalents of PhCHNPh, such that the couplings involved the two termini of the same dienyl ligand, yielding a formal Zr(η⁵-dienyl)(η³-allyl)(π-amide)₂ complex. Both metal complexes have been structurally characterized.     

FeCl3/PPh3-catalyzed Sonogashira coupling reaction of aryl iodides with terminal alkynes

Conditions for a FeCl₃/PPh₃-catalyzed and palladium-, copper-, amine free-Sonogashira coupling reaction of aryl halides with terminal alkynes are reported. The protocol was applicable to a wide variety of substituted aryl iodides and alkynes with different steric and electronic properties and gave excellent yields of the desired coupling products.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

Arylation of lawsone through BF3-mediated coupling of its phenyliodonium ylide with activated arenes and aromatic aldehydes

Phenyliodonium ylide of lawsone, activated by BF₃·Et₂O, reacts with electron-rich arenes to afford the corresponding 2-aryl-3-hydroxy-1,4-naphthoquinones, in a coupling reaction without metal catalysts. The same type of products, in greater variety and higher yields, are obtained from the reaction of the BF₃·Et₂O-activated ylide with aromatic aldehydes in a synthetically and mechanistically interesting deformylation reaction.     

Si-C coupling reaction of polychloromethanes with HSiCl3 in the presence of Bu4PCl: Convenient synthetic method for bis(chlorosilyl)methanes

Coupling reaction of polychloromethanes CH_4−nCl_n (n = 2-4) with HSiCl₃ in the presence of tetrabutylphosphonium chloride (Bu₄PCl) as a catalyst occurred at temperatures ranging from 30 °C to 150 °C. The reactivity of polychloromethanes increases as the number of chlorine-substituents on the carbon increases. In the reactions of CCl₄ with HSiCl₃, a variety of coupling products such as bis(chlorosilyl)methanes CH₂(SiCl₃)(SiXCl₂) [X = Cl (1a), H (1b)], (chlorosilyl)trichloromthanes Cl₃CSiXCl₂ [X = Cl (2a), H (2b)], and (chlorosilyl)dichloromthanes Cl₂HCSiXCl₂ [X = Cl (3a), H (3b)] were obtained along with reductive dechlorination products such as CHCl₃ and CH₂Cl₂ depending on the reaction temperature. In the reaction of CCl₄, 2a is formed at the initial stage of the coupling reaction and converted to give CHCl₃ at low temperature of 30 °C, to give 1a, 3a, and CHCl₃ at 60 °C, and to afford 1a as major product and CH₂Cl₂ in competition above 100 °C. Si-H bond containing silylmethanes can be formed by the H-Cl exchange reaction with HSiCl₃. Reaction of CHCl₃ with HSiCl₃ took placed at 80 °C to give three compounds 1a, 3a, and CH₂Cl₂, and finally 3a was converted to give 1a and CH₂Cl₂ at longer reaction time. While the condition for the reaction of CH₂Cl₂ with HSiCl₃ required a much higher temperature of 150 °C. Under the optimized conditions for synthesizing bis(chlorosilyl)methanes 1a,b, a mixture of 1a and 1b were obtained as major products in 65% (1a:1b = 64:1) and 47% (42:5) yields from the reaction of CCl₄ and CHCl₃ at 100 °C for 8 h, respectively, and in 41% (34:7) yield from that of CH₂Cl₂ at 170 °C for 12 h. In the Si-C coupling reaction of polychloromethanes with HSiCl₃, it seems likely that a trichlorosilyl anion generated from the reaction of HSiCl₃ with Bu₄PCl is an important key intermediate.     

Palladium-catalyzed phenyl-selenylation with n-Bu3SnSePh in one-pot two-step reactions

We have studied the Pd-catalyzed cross-coupling reaction of a stannane derived from selenium n-Bu₃SnSePh (1) with aryl and perfluoroalkyl iodides. Herein a very efficient one-pot two-step selenylation reaction to form a C-Se bond is reported. Ph₂Se₂ reacts with Na metal in liquid ammonia yielding PhSe⁻ ions. To this solution n-Bu₃SnCl was added to afford 1, which was introduced in the palladium-catalyzed coupling reaction without isolation. These reactions afford functionalized diarylselenides and phenylperfluroalkyl selenides from good to high yields (38-98%).     

Dehalogenative aromatization of perchlorofluoroalicyclic compounds C6Cl6F6, C10Cl8F8 and C5Cl4F5N in the vapour phase or in solution

Dehalogenation of perhalogenated cyclohexanes C₆Cl₆F₆, 1-azacyclohexenes C₅Cl₄F₅N and bicyclo[4.4.0]dec-1(6)-enes C₁₀Cl₈F₈ in the vapour phase over iron filings at 350-500 °C and in solution with Zn and additivities (Cu, NiCl₂·6H₂O + bpy) at 80 °C (heterogeneous reaction) or with P(NEt₂)₃ at 20 °C (homogeneous reaction) was studied. In all cases, perfluoroarenes, chloroperfluoroarenes and dichloroperfluoroarenes (benzenes, naphthalenes and pyridines) were obtained in good overall yield.     

Graphitic carbon nitride C6N9H3·HCl: Characterisation by UV and near-IR FT Raman spectroscopy

The graphitic layered compound C₆N₉H₃·HCl was prepared by reaction between melamine and cyanuric chloride under high pressure-high temperature conditions in a piston cylinder apparatus and characterised using SEM, powder X-ray diffraction, UV Raman and near-IR Fourier transform Raman spectroscopy with near-IR excitation. Theoretical calculations using density functional methods permitted evaluation of the mode of attachment of H atoms to nitrogen sites in the structure and a better understanding of the X-ray diffraction pattern. Broadening in the UV and near-IR FT Raman spectra indicate possible disordering of the void sites within the graphitic layers or it could be due to electron-phonon coupling effects.     

The magnetic structure of clinopyroxene-type LiFeGe2O6 and revised data on multiferroic LiFeSi2O6

The clinopyroxene compounds LiFeSi₂O₆ and LiFeGe₂O₆ have been investigated by constant wavelength neutron diffraction at low temperatures and by bulk magnetic measurements. Both compounds are monoclinic, space group P2₁/c and do not exhibit a change in nuclear symmetry down to 1.4 and 5 K respective. However, they transform to a magnetically ordered state below 20 K. LiFeSi₂O₆ shows a simple magnetic structure with no indication of an incommensurate modulation. The magnetic space group is P2₁/c′ and the structure is described by a ferromagnetic coupling of spins within the infinite M1 chains of edge-sharing octahedra, while the coupling between these M1 chains is antiferromagnetic. The magnetic phase transition is accompanied by magnetostriction of the lattice when passing through the magnetic phase transition. The magnetic structure of LiFeGe₂O₆ is different to the silicate: the space group is and the magnetic unit cell doubled along the a-direction. Within the M1 chains spins are coupled antiferromagnetically, while the chain to chain coupling is antiferromagnetic when coupling goes via the GeB tetrahedron and ferromagnetic when it goes via the GeA tetrahedron.     

Synthesis of nano-sized crystalline oxide ion conducting fluorite-type Y2O3-doped CeO2 using perovskite-like BaCe0.9Y0.1O2.95 (BCY) and study of CO2 capture properties of BCY

Formation of nano-sized Y₂O₃-doped CeO₂ (YCO) was observed in the chemical reaction between proton conducting Y₂O₃-doped BaCeO₃ (BCY) and CO₂ in the temperature range 700-1000 °C, which is generally prepared by wet-chemical methods that include sol-gel, hydrothermal, polymerization, combustion, and precipitation reactions. BCY can capture CO₂ of 0.13 g per ceramic gram at 700 °C, which is comparable to that of the well-known Li₂ZrO₃ (0.15 g per ceramic gram at 600 °C). Powder X-ray diffraction (PXRD), energy dispersive X-ray analysis (EDX), laser particle size analysis (LPSA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ac impedance spectroscopy were employed to characterize the reaction product obtained from reaction between BCY and CO₂ and subsequent acid washing. PXRD study reveals presence of fluorite-like CeO₂ (a=5.410 (1) Å) structure and BaCO₃ in reaction products. TEM investigation of the acid washed product showed the formation of nano-sized material with particle sizes of about 50 nm. The electrical conductivity of acid washed product (YCO) in air was found to be about an order higher than the undoped CeO₂ reported in the literature.     

Gallium tri-chloride derivatives of the sterically demanding pyridines 2,6-Ar2C6H3N (Ar = 2,4,6-Me3C6H2 or 2,4,6-Pr3C6H2)

The sterically demanding pyridines 2,6-Ar₂C₆H₃N [Ar = 2,4,6-Me₃C₆H₂ (1) or 2,4,6-Prⁱ₃C₆H₂ (2)] were prepared by a palladium catalysed Kumada C–C coupling reaction in high yield. Pyridine 1 reacted with one equivalent of GaCl₃ to afford the tetra-chloro gallate–pyridinium ion pair complex [GaCl₄]⁻[2,6-(2,4,6-Me₃C₆H₂)₂C₆H₃NH]⁺ (3). Contrastingly, pyridine 2 reacted with one equivalent of GaCl₃ to afford the anticipated donor-acceptor complex [GaCl₃{2,6-(2,4,6-Prⁱ₃C₆H₂)₂C₆H₃N}] (4). Complexes 1–4 have been characterised variously by single crystal X-ray diffraction, NMR, CHN, and mass spectrometry.     

Synthetic studies on bafilomycin A1: stereoselective synthesis of the C12-C17 fragment and its coupling with the C1-C11 subunit

Stereoselective addition of (E)-1-lithio-2-tributylstannylethylene on a chiral cyclic di-t-butylsilyleneketal C₁₄-C₁₇ aldehyde afforded the required Felkin-Anh adduct for the synthesis of the C₁₂-C₁₇ fragment of bafilomycin A₁, the configuration of which was assigned unambiguously. After appropriate coupling with the enantiopure C₁-C₁₁ fragment, the C₁₂-C₁₇ subunit obtained here can be used for the study of the 16-membered macrolide formation either by an acyl activation or an intramolecular Stille reaction. Intermolecular esterification of the 15-OH with an acyl activation of the carboxylic acid of the C₁-C₁₁ fragment, in modified Yamaguchi's conditions, affords here an intermediate for examining an intramolecular Stille coupling.     

纳米Sb2O3的制备与性能研究

由于Sb2O3是一种性能优良的无机阻燃剂,并与卤素阻燃剂有很好的协效作用[1],1998年,全球用于阻燃的Sb2O3达80kt以上,占阻燃剂总耗量的7%[2]。但由于其本身的极性特点,加入到纤维、塑料等高分子材料中,材料的力学性能受到很大损失[3],因此对传统的微米级的Sb2O3进行超细、表面处     

Size dependent electron-phonon coupling in Li0.5Co0.1Fe2.4O4 nanoparticles investigated by Raman spectroscopy

The Raman spectra of Li_0.5Co_0.1Fe_2.4O₄ nanoparticles have been recorded in the spectral range, 400-800 cm⁻¹ at four different particle sizes. X-ray and TEM measurements were done to determine crystal structure and size of the nanoparticles. X-ray diffraction (XRD) shows that the Li_0.5Co_0.1Fe_2.4O₄ nanoparticles have an order phase spinel structure without any impurity. The size of the nanocrystal was calculated through XRD patterns and TEM micrographs and it turns out to be 34-42 nm. The Raman spectra of each size nanoparticles show five Raman bands. The most intense Raman band shows a noticeable asymmetrical feature towards lower wavenumber side. A line shape analysis was performed to get the exact spectral parameters of the Raman bands. The intensity of asymmetrical feature keeps on increasing with decreasing the particle size from 42 nm to 34 nm and finally evolved as a new Raman band. The appearance of new band and its intensity response relative to the intensity of the main Raman band as a function of particle size has been explained in terms of electron-phonon coupling. It was observed that the strength of electron-phonon coupling goes on increasing with reducing the particle size. The red shifting of the Raman bands upon reducing the crystalline size is explained in terms of the lattice expansion, which is well supported by the XRD data.