Darstellung,Strukturen und EPR-Spektren der Rhenium(II)-Nitrosylkomplexe [Re(NO)Cl2(PPh3)(OPPh3)(OReO3)], [Re(NO)Cl2(OPPh3)2(OReO3)] und [Re(NO)Cl2(OPPh3)3](ReO4)

Synthesis, Structures, and EPR-Spectra of the Rhenium(II) Nitrosyl Complexes [Re(NO)Cl₂(PPh₃)(OPPh₃)(OReO₃)], [Re(NO)Cl₂(OPPh₃)₂(OReO₃)], and [Re(NO)Cl₂(OPPh₃)₃](ReO₄) The paramagnetic rhenium(II) nitrosyl complexes [Re(NO)Cl₂(PPh₃)(OPPh₃)(OReO₃)], [Re(NO)Cl₂(OPPh₃)₂ · (OReO₃)], and [Re(NO)Cl₂(OPPh₃)₃](ReO₄) are formed during the reaction of [ReOCl₃(PPh₃)₂] with NO gas in CH₂Cl₂/EtOH. These and two other Re^II complexes with 5 d⁵ ”︁low-spin”︁”︁-configuration can be observed during the reaction EPR spectroscopically. Crystal structure analysis shows linear coordinated NO ligands (Re–N–O-angles between 171.9 and 177.3°). Three OPPh₃ ligands are meridionally coordinated in the final product of the reaction, [Re(NO)Cl₂(OPPh₃)₃][ReO₄] (monoclinic, P2₁/c, a = 13.47(1), b = 17.56(1), c = 24.69(2) Å, β = 95.12(4)°, Z = 4). [Re(NO)Cl₂(PPh₃)(OPPh₃)(OReO₃)] (triclinic P 1, a = 10.561(6), b = 11.770(4), c = 18.483(8) Å, α = 77.29(3), β = 73.53(3), γ = 64.70(4)°, Z = 2) and [Re(NO)Cl₂ (OPPh₃)₂(OReO₃)] (monoclinic P2₁/c, a = 10.652(1), b = 31.638(4), c = 11.886(1) Å, β = 115.59(1)°), Z = 4) can be isolated at shorter reaction times besides the complexes [Re(NO)Cl₃(Ph₃P)₂], [Re(NO)Cl₃(Ph₃P) · (Ph₃PO)], and [ReCl₄(Ph₃P)₂].     

Probing Surface Sites of TiO2: Reactions with [HRe(CO)5] and [CH3Re(CO)5]

Two carbonyl complexes of rhenium, [HRe(CO)₅] and [CH₃Re(CO)₅], were used to probe surface sites of TiO₂ (anatase). These complexes were adsorbed from the gas phase onto anatase powder that had been treated in flowing O₂ or under vacuum to vary the density of surface OH sites. Infrared (IR) spectra demonstrate the variation in the number of sites, including Ti⁺³? OH and Ti⁺⁴? OH. IR and extended X‐ray absorption fine structure (EXAFS) spectra show that chemisorption of the rhenium complexes led to their decarbonylation, with formation of surface‐bound rhenium tricarbonyls, when [HRe(CO)₅] was adsorbed, or rhenium tetracarbonyls, when [CH₃Re(CO)₅] was adsorbed. These reactions were accompanied by the formation of water and surface carbonates and removal of terminal hydroxyl groups associated with Ti⁺³ and Ti⁺⁴ ions on the anatase. Data characterizing the samples after adsorption of [HRe(CO)₅] or [CH₃Re(CO)₅] determined a ranking of the reactivity of the surface OH sites, with the Ti⁺³? OH groups being the more reactive towards the rhenium complexes but the less likely to be dehydroxylated. The two rhenium pentacarbonyl probes provided complementary information, suggesting that the carbonate species originate from carbonyl ligands initially bonded to the rhenium and from hydroxyl groups of the titania surface, with the reaction leading to the formation of water and bridging hydroxyl groups on the titania. The results illustrate the value of using a family of organometallic complexes as probes of oxide surface sites.     

Reaction of 2-substituted-4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carbaldehyde oximes with electron-deficient olefins and acetylenes

A facile oxime-nitrone isomerization through the 1,2-hydrogen shift in 4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carbaldehyde oximes is discussed. The resultant NH-nitrones are trapped by maleimides to afford intermolecular cycloadducts. The reaction of the oximes with electron-deficient acetylenes undergoes via another path initiated by a nucleophilic attack of the oxime to acetylene moiety.     

Synthese und Kristallstruktur von [Cr(NH3)6][Cr(NH3)2F4][BF4]2

Synthesis and Crystal Structure of [Cr(NH₃)₆][Cr(NH₃)₂F₄][BF₄]₂ The action of ammonium fluoride on a mixture of boron and chromium in a sealed Monel ampoule at 300 °C yields single crystals of [Cr(NH₃)₆][Cr(NH₃)₂F₄][BF₄]₂. The crystal structure (tetragonal, P4/mbm, Z = 2, a = 1056.0(1), c = 781.7(1) pm; R₁ = 0.0414; wR₂ = 0.1087 for 411 reflections with I₀ > 2σ(I)) contains [Cr(NH₃)₆]³⁺ and [Cr(NH₃)₂F₄]^– octahedra and twice as many [BF₄]^– tetrahedra that are arranged in a quadrupled super‐structure of the CsCl‐type of structure.     

Darstellung und Strukturen von (Et4N)2[Re(CO)3(NCS)3] und (Et4N)[Re(CO)2Br4]

Syntheses and Structures of (Et₄N)₂[Re(CO)₃(NCS)₃] and (Et₄N)[Re(CO)₂Br₄] Rhenium(I) and rhenium(III) carbonyl complexes can easily be prepared by ligand exchange reactions starting from (Et₄N)₂[Re(CO)₃Br₃]. Using nonoxidizing reagents the facial Re^I(CO)₃ unit remains and only the bromo ligands are exchanged. Following this procedure, (Et₄N)₂[Re(CO)₃(NCS)₃] can be obtained in high yield and purity using trimethylsilylisothiocyanate. The compound crystallizes in the monoclinic space group P2₁/n, a = 18.442(5), b = 17.724(3), c = 18.668(5) Å, β = 92.54(1)°, Z = 8. The NCS^? ligands are coordinated via nitrogen. The reaction of [Re(CO)₃Br₃]^2? with Br₂ yields the rhenium(III) anion [Re(CO)₂Br₄]^?. The tetraethylammonium salt of this complex crystallizes in the noncentrosymmetric, orthorhombic space group Cmc2₁, a = 8.311(1), b = 25.480(6), c = 8.624(1) Å, Z = 4. The carbonyl ligands are positioned in a cis arrangement. Their strong trans influence causes a lengthening of the Re? Br bond distances by at least 0.05 Å.     

Magnetic and spectroscopic properties of [Co(AGlH)2py2][Cr(NH3)2NCS)4] and [Co(AGlH)2py2][Co(NH3)2(NO2)4] complexes

The magnetic and spectroscopic (UV, visible-IR and electron paramagnetic resonance spectra) properties of the molecular complexes [Co(AGlH)₂py₂][Cr(NH₃)₂(NCS)₄] and [Co(AGlH)₂py₂][Co(NH₃)₂(NO₂)₄] (where AGlH₂ is diaminoglyoxime) have been examined in solid state. The molecular structure of the complexes and the nature of the interaction in the crystals has been considered.     

Nitrosylbromokomplexe des Rheniums: Re(NO)2Br3 und [Re(NO)2Br4]⊖; die Kristallstruktur von PPh4[Re(NO)2Br4] · 2 CCl4

Nitrosyl Bromo Complexes of Rhenium: Re(NO)₂Br₃ and [Re(NO)₂Br₄]^?; Crystal Structure of PPh₄[Re(NO)₂Br₄] · 2 CCl₄ PPh₄[Re(NO)₂Br₄] is prepared in the form of dark red-brown powder by the reaction of PPh₄[Re(NO)₂Cl₄] with excess boron tribromide. From a solution of CH₂Br₂ and CCl₄ it crystallizes with two moles CCl₄, one of which splits off easily in vacuo. The reaction of aluminum tribromide in CH₂Br₂ solution leads to a slightly soluble red-brown Re(NO)₂Br₃ powder. The i.r. spectra indicate cis positions of the covalently bound NO ligands in both complexes. Re(NO)₂Br₃ is dimeric via bromo bridges. The crystal structure determination of PPh₄[Re(NO)₂Br₄] · 2 CCl₄ was solved by X-ray diffraction methods at ? 115°C. The complex crystallizes in the monoclinic space group P2₁/c with four formula units per unit cell (4434 independent reflexions, R = 0.085). The unit cell dimensions are a = 1 092.3 pm, b = 2088.0 pm, c = 1 657.6 pm, β = 96.10°. The structure consists of P(C₆H₅)₄^? cations, [Re(NO)₂Br₄]^? anions and intercalated CCl₄ molecules. In the anion the NO groups are covalently bound to the Re atom like \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {{\rm RE}}\limits^ \ominus = \mathop {\rm N}\limits^ \oplus = {\rm O} $\end{document} and they are arranged in cis position to one another.     

Sequential reduction of high hydride count octahedral rhodium clusters [Rh6(PR3)6H12][BArF4]2: redox-switchable hydrogen storage

Cyclic voltammetry on the octahedral rhodium clusters with 12 bridging hydride ligands, [Rh6(PR3)6H12][BArF4]2 (R = Cy Cy-[H12]2+, R = iPr iPr-[H12]2+; [BArF4]- = [B{C6H3(CF3)2}4]-) reveals four potentially accessible redox states: [Rh6(PR3)6H12]0/1+/2+/3+. Chemical oxidation did not produce stable species, but reduction of Cy-[H12]2+ using Cr(eta6-C6H6)2 resulted in the isolation of Cy-[H12]+. X-ray crystallography and electrospray mass spectrometry (ESI-MS) show this to be a monocation, while EPR and NMR measurements confirm that it is a monoradical, S = 1/2, species. Consideration of the electron population of the frontier molecular orbitals is fully consistent with this assignment. A further reduction is mediated by Co(eta5-C5H5)2. In this case the cleanest reduction was observed with the tri-isopropyl phosphine cluster, to afford neutral iPr-[H12]. X-ray crystallography confirms this to be neutral, while NMR and magnetic measurements (SQUID) indicate an S =1 paramagnetic ground state. The clusters Cy-[H12]+ and iPr-[H12] both take up H2 to afford Cy-[H14]+ and iPr-[H14], respectively, which have been characterized by ESI-MS, NMR spectroscopy, and UV-vis spectroscopy. Inspection of the frontier molecular orbitals of S = 1 iPr-[H12] suggest that addition of H2 should form a diamagnetic species, and this is the case. The possibility of "spin blocking" in this H2 uptake is also discussed. Electrochemical investigations on the previously reported Cy-[H16]2+ [J. Am. Chem. Soc. 2006, 128, 6247] show an irreversible loss of H2 on reduction, presumably from an unstable Cy-[H16]+ species. This then forms Cy-[H12]2+ on oxidation which can be recharged with H2 to form Cy-[H16]2+. We show that this loss of H2 is kinetically fast (on the millisecond time scale). Loss of H2 upon reduction has also been followed using chemical reductants and ESI-MS. This facile, reusable gain and loss of 2 equiv of H2 using a simple one-electron redox switch represents a new method of hydrogen storage. Although the overall storage capacity is very low (0.1%) the attractive conditions of room temperature and pressure, actuation by the addition of a single electron, and rapid desorption kinetics make this process of interest for future H2 storage applications.     

Umsetzungen von Halbsandwich-Rhenium(V)-Oligochalkogenidkomplexen mit Acetylen-dicarbonsäuredimethylester. Molekülstrukturen der neuen 1,2-Dicarbomethoxy-ethen-1,2-dichalkogenat-Chelatverbindungen Cp*Re[S2C2(COOMe)2]2 und Cp*Re(NtBu)[Se2C2(COOMe)2]

Reactions of Halfsandwich Rhenium(V) Oligochalcogenide Complexes with Dimethyl Acetylene Dicarboxylate. Molecular Structures of the New 1,2-Dicarbomethoxy-ethene-1,2-dichalcogenate Chelate Compounds Cp*Re[S₂C₂(COOMe)₂]₂ and Cp*Re(N^tBu)[Se₂C₂(COOMe)₂] The reaction of Cp*Re(S₃)(S₄) ( 1a ) with dimethyl acetylene dicarboxylate (dmad) leads through the blue intermediate Cp*Re(S₄)[S₂C₂(COOMe)₂] ( 2a ) to the red bis(ethene-1,2-dithiolato) complex Cp*Re[S₂C₂(COOMe)₂]₂ ( 3a ). The product 3a is also formed in the reactions of dmad with the tetrasulfidorhenium complexes Cp*Re(L)(S₄) (L = O ( 4a ), N^tBu ( 5a )) while the analogous tetraselenidorhenium compounds Cp*Re(L)(Se₄) ( 4b and 5b ) are only transformed to Cp*Re(L)[Se₂C₂(COOMe)₂] (L = O ( 6b ), N^tBu ( 7b )). According to the X-ray crystal structure analyses, the (ethene-1,2-dithiolato)rhenium chelate rings in 3a are folded along the S …? S vector towards the Cp* ligand (angle between the planes ReS₂/S₂C₂ 159.2°), whereas the ReSe₂C₂ chelate ring in 7b is planar.     

Synthese und Struktur von (PPh4)3[Re2NCl10]

Synthesis and Crystal Structure of (PPh₄)₃[Re₂NCl₁₀] The rhenium(V) nitrido complex (PPh₄)₃[Re₂NCl₁₀] ( 1 ) is obtained from the reaction of (PPh₄)[ReNCl₄] with 1, 3‐dioxan‐(2‐ylmethyl)diphenyl phosphine in CH₂Cl₂/CH₃CN in form of orange red crystals with the composition 1 ·2CH₂Cl₂ crystallizing in the triclinic space group P1¯ with a = 1210.7(2), b = 1232.5(1), c = 2756.3(5) pm, α = 99.68(1)°, β = 100.24(1)°, γ = 98.59(1)° and Z = 2. The crystal structure contains two symmetry independent, centrosymmetrical complex anions [Re₂NCl₁₀]^3‐ with a symmetrical nitrido bridge Re=N=Re and distances Re(1) ‐ N(1) = 181.34(5) and Re(2) ‐ N(2) = 181.51(4) pm.     

Syntheses and Reactions of Rhenium Carbamoyl Complexes of the Type (CO)4Re(NH2R)(CONHR) (R = Ethyl,Allyl or Isopropyl)

Carbamoyl complexes, (CO)₄Re(NH₂R)(CONHR)(R = ethyl, 1; R = allyl, 2; R = isopropyl, 3) were prepared by reactions of (CO)₅ReBr (or (CO)₅ReCH₂SiMe₃) with appropriate amines. Complexes 1, 2 and 3 reacted with CH₃CH₂COCl to give Re(CO)₅(NH₂R)⁺Cl^? (R = ethyl, 4; R = allyl, 5; R - isopropyl, 6). Complex 5 undergoes nucleophilic attack by KOMe to give the alkoxycarbonyl complexes (CO)₄Re(NH₂-Allyl)(COOMe), 7. Complexes 4, 5, 6 and 7 were transformed to the corresponding carbamoyl complexes by reacting with appropriate amines. The reactions between the carbamoyl complexes and R″OH/CHCl₃ in air at room temperature gave the proposed products [(CO)₄Re(NH₂R)]₂O (R = allyl, 8; R = isopropyl, 9), respectively. Complex 8 can also be prepared by heating 7 in CDCl₃ at 63–68°C for several days. The structure of 1 was confirmed by a X-ray crystallographic study. Crystallographic data: space group P2₁/c, a = 8.193 (3) Å, b = 19.273 (3) Å, c = 9.348 (8) Å, β = 110.37 (4)°, V = 1383.68 ų, Z = 4; R(F) = 0.027, R_w(F) = 0.030, based on 1888 reflections with I > 2.5σ(I). The other complexes were characterized by ¹H NMR, ¹³CNMR, IR and mass spectra.     

X-ray structure of [Re(NO)2.09Br1.91(PPh3)2] and DFT studies of [Re(NO)2Br2(PPh3)2]

The crystal and molecular structure of [Re(NO)_2.09Br_1.91(PPh₃)₂] and DFT studies of [Re(NO)₂Br₂(PPh₃)₂] are reported. The linearly bonded nitrosyl ligands adopt cis geometry, and two bulky triphenylphosphine molecules occupy axial positions of a distorted octahedral coordination sphere. The cis-nitrosyl grouping with respect to PPh₃ molecules (π-acid ligands) is the result of the electronic influence of the multiply bonded ligand, which forces the metal nonbonding d electrons to lie in the plane perpendicular to the M–NO bond axis.     

Reversible addition of water to the high-hydride-content cluster [Rh6(PiPr3)6H12][BArF4]2. Synthesis and Structure of [Rh6PiPr3)6H11(OH)][BArF4]2

The hydroxyhydrido salt [Rh(6)(P(i)Pr(3))(6)H(11)(OH)][BArF(4)](2) results from the addition of water to [Rh(6)(P(i)Pr(3))(6)H(12)][BArF(4)](2). This reaction is reversible, and the addition of dihydrogen to [Rh(6)(P(i)Pr(3))(6)H(11)(OH)][BArF(4)](2) results in the elimination of water and the regeneration of the hydride cluster.     

[Rb2(H2O)2][Re3(μ-Cl)3Br7(H2O)2]2 · H2O,ein gemischtes Halogenid-Hydrat mit anionischen Dimeren {[Re3(μ-Cl)3Br7(H2O)2]2 · H2O}2−

[Rb₂(H₂O)₂][Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O, a Mixed Halide-Hydrate with the Anionic Dimer {[Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O}^2? [Rb₂(H₂O)₂][Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O crystallizes as dark redbrown single crystals from an hydrobromic-acid solution of ReCl₃ and RbBr at 0°C. An important feature of the crystal structure (monoclinic, C2/c; a = 1494.61(8); b = 835.71(4); c = 3079.96(19) pm; β = 97.801(4)°; V_m = 573.9(4) cm³mol^?1; R = 0.060; R_w = 0.038) is the connection of two anions [Re₃(μ-Cl)₃Br₇(H₂O)₂]^? via a water molecule to dimers, {[Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O}^2?. These dimeric units are contained in slabs that are stacked in the [001] direction and held together by Rb⁺ cations and crystal water.     

Nucleophilic Addition Reactions of Tricarbonyl [η5-1-(Phenylthio)Cyclohexadienyl]Iron(I) Complex

Hydride abstraction of tricarbonyl[η⁴phenylthio)-l,3-cyclohexadiene]iron(0) complex 2 with Ph₃C⁺PF₆^? regiospecifically provided the title compound 3 in excellent yield. Cationic complex 3 could react with a variety of nucleophiles in good yield. Hard nucleophiles prefer to attack at the C-l position, whereas soft and hindered nucleophiles favor attack at the C-5 position. Some synthetic applications were also studied.     

[Au(Et2dtc)2][TcNCl4] – Darstellung und Struktur

[Au(Et₂dtc)₂][TcNCl₄] – Synthesis and Structure [Au(Et₂dtc)₂][TcNCl₄] (Et₂dtc^– = N,N‐diethyldithiocarbamate) is formed by the reaction of [Au(CO)Cl] with [TcN(Et₂dtc)₂] in dichloromethane. The solid state structure of the compound is characterized by a large triclinic unit cell (space group, P1, a = 9.422(2), b = 22.594(5), c = 32.153(7) Å, α = 72.64(1), β = 85.19(1), γ = 86.15(1)°, Z = 12) and shows an unusual arrangement due to long‐range contacts between the technetium atoms and sulfur atoms of the [Au(Et₂dtc)₂]⁺ units (3.45–3.56 Å) which assemble two anions and one cation to {[TcNCl₄][Au(Et₂dtc)₂] · [TcNCl₄]}^– moieties.     

Zur solvensfreien Darstellung von Tetramethylammoniumsalzen: Synthese und Charakterisierung von [N(CH3)4]2[C2O4], [N(CH3)4][CO3(CH3)], [N(CH3)4][NO2], [N(CH3)4][CO2H] und [N(CH3)4][O2C(CH2)2CO2(CH3)]

Solvent-free Synthesis of Tetramethylammonium Salts: Synthesis and Characterization of [N(CH₃)₄]₂[C₂O₄], [N(CH₃)₄][CO₃CH₃], [N(CH₃)₄][NO₂], [N(CH₃)₄][CO₂H], and [N(CH₃)₄][O₂C(CH₂)₂CO₂CH₃] A general procedure to synthesize tetramethylammonium salts is presented. Several tetramethylammonium salts were prepared in a crystalline state by solvent-free reaction of trimethylamine and different methyl compounds at mild conditions: [N(CH₃)₄]₂[C₂O₄] (cubic; a = 1 114.8(3) pm), [N(CH₃)₄][CO₃CH₃] (P2₁/n; a = 813.64(3), b = 953.36(3), c = 1 131.3(4) pm, β = 90.03(1)°), [N(CH₃)₄][NO₂] (Pmmn; a = 821.2(4), b = 746.5(3), c = 551.5(2) pm), [N(CH₃)₄][CO₂H] (Pmmn; a = 792.8(7), b = 791.7(3), c = 563.3(4) pm) and [N(CH₃)₄][O₂C(CH₂)₂CO₂CH₃] (P2₁; a = 731.1(2), b = 826.4(3), c = 1 025.2(3) pm, β = 110.1(1)°). The tetramethylammonium salts were characterized by IR-spectroscopy and X-ray diffraction. The crystal structures of the methylcarbonate and the nitrite are described.