Luminescent properties of Eu2+and Dy3+ ions in Ba4Al2O7 phosphor for solid state lighting

In this paper we report the combustion synthesis of rare earth (RE=Eu, Dy) doped Ba₄Al₂O₇ phosphors. Prepared phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), CIE color co-ordinates and their photoluminescence (PL) properties were also investigated. In case of Ba₄Al₂O₇: Eu²⁺, the emission spectra show unique band centered at 495 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺, and PL emission spectra of Dy³⁺ ion under 348 nm excitation give two bands centered at 478 nm (blue) and 575 nm (yellow), which originate from the transitions of ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 of Dy³⁺, respectively. The results indicate that the Eu²⁺ and Dy³⁺ activated Ba₄Al₂O₇ phosphor could find application in solid state lighting.     

Diffusion of Fe,Co, Nd,and Dy in R2(Fe1−xCox)14B where R=Nd or Dy

Transition metal and rare earth diffusion coefficients at 1323 K in Dy_2−yNd_y(Fe_1−xCo_x)₁₄B were determined by field emission energy dispersive spectroscopy compositional analysis of diffusion couple specimens. Various arrangements of component materials and temperatures were examined in order to understand the mechanisms affecting diffusion of the components and to predict the stability of functionally graded microstructures consisting of a dysprosium-rich (Dy_2−yNd_y(Fe_1−xCo_x)₁₄B) outer layer and a neodymium-rich (Nd₂(Fe_1−xCo_x)₁₄B) interior. Estimates of the mutual interdiffusion coefficients of Dy, Nd, Fe, and Co in this system were obtained from the preparation of arc melted and annealed polycrystalline specimens, assuming that the diffusion coefficients were independent of concentration (Grube solution). Fifteen diffusion couples were prepared and heat treated at 1323 K for various times in order to provide data for calculation of the diffusion coefficients. The results indicate that the diffusion coefficients of Fe and Co (D_Fe=3.28×10⁻¹⁰ cm²/s and D_Co=7.63×10⁻¹⁰ cm²/s) were significantly higher at 1323 K in this system than those for Dy and Nd (D_Nd=2.3×10⁻¹² cm²/s and D_Dy=2.9×10⁻¹² cm²/s).     

Spin reorientation and magnetocrystalline anisotropy of (Nd1−xDyx) Fe14B

Spin reorientation and magnetocrytalline anisotropy of (Nd_1−xDy_x)₂Fe₁₄B (x=0.25, 0.5, 0.75) have been studied from mangetization curves of magnetically aligned powders. In (Nd_1−xDy_x)₂Fe₁₄B, the spin reorientation temperature (T_SR) decreases linearly on increasing Dy-substitution from 135 to 56 K with the ratio of ΔT_SR=−1.11 K/Dy at% in the composition range of 0⩽x⩽0.75. The spin reorientation angle at 4.2 K decreases on Dy-substitution from 30.4° at x=0 to 14.7° at x=0.75. From the investigation of the magnetocrystalline anisotropy at 4.2 K, the disappearance of the spin reorientation for compositions x≳0.85 is expected.     

Improvement of sonocatalytic activity of TiO2 by using Yb,N and F-doped Er3+:Y3Al5O12 for degradation of organic dyes

In this study, several up-conversion luminescence agents (Er³⁺:Y₃Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99 and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98) were synthesized using sol–gel method. And then, the corresponding sonocatalyst (Er³⁺:Y₃Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99/TiO₂ and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites) were prepared by sol–gel coating process. The synthesized up-conversion luminescence agents and their coated composites were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). And that, the sonocatalytic activities were detected through the degradation of Azo Fuchsine (AF) dye in aqueous solution by UV–vis spectroscopy. Some key influences such as heat-treated temperature and heat-treated time on the sonocatalytic activity of Er³⁺:Yb_aY_2.99−aN_xF_yAl₅O_12−x−y/TiO₂ coated composite, as well as ultrasonic irradiation time and initial dye concentration on the sonocatalytic degradation were studied. The results showed that the doping of Yb, N and F into Er³⁺:Y₃Al₅O₁₂/TiO₂ significantly enhanced the sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂ coated composite in the degradation of organic dyes. Particularly, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites with 3:7 M ratio heat-treated at 550 °C for 60 min showed the highest sonocatalytic activity. At last, the experiments also indicated that the Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites has a good sonocatalytic activity to degrade other organic dyes under ultrasonic irradiation.     

Upconversion photoluminescence properties of SrY2(MoO4)4:Er3+/Yb3+ phosphors synthesized by a cyclic microwave-modified sol–gel method

SrY_2−x(MoO₄)₄:Er³⁺/Yb³ phosphors with doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0.05, 0.1, 0.2 and Yb³⁺ = 0.2, 0.45) have been successfully synthesized by a cyclic microwave-modified sol–gel method, and the upconversion photoluminescence properties have been investigated. Well-crystallized particles showed a fine and homogeneous morphology with particle sizes of 1–3 μm. Under excitation at 980 nm, SrY₂(MoO₄)₄:Er³⁺/Yb³⁺ particles exhibited a strong 525-nm, weak 550-nm emission bands in the green region, and a very weak 655-nm emission band in the red region. The possible mechanism of the green and red emissions was discussed in detail under consideration of a two-photon process. The Raman spectra of the particles indicated the presence of strong peaks at both higher and lower frequencies.     

Structural and electrochemical properties of LiNi0.5Mn0.5 − xAlxO2 (x = 0, 0.02, 0.05, 0.08, and 0.1) cathode materials for lithium-ion batteries

Layered LiNi_0.5Mn_0.5 ? xAl_xO₂ (x = 0, 0.02, 0.05, 0.08, and 0.1) series cathode materials for lithium-ion batteries were synthesized by a combination technique of co-precipitation and solid-state reaction, and the structural, morphological, and electrochemical properties were examined by XRD, FT-IR, XPS, SEM, CV, EIS, and charge–discharge tests. It is proven that the aliovalent substitution of Al for Mn promoted the formation of LiNi_0.5Mn_0.5 ? xAl_xO₂ structures and induced an increase in the average oxidation number of Ni, thereby leading to the shrinkage of the lattice volume. Among the LiNi_0.5Mn_0.5 ? xAl_xO₂ materials, the material with x = 0.05 shows the best cyclability and rate ability, with discharge capacities of 219, 169, 155, and 129 mAh g^? 1 at 10, 100, 200, and 400 mA g^? 1 current density respectively. Cycled under 40 mA g^? 1 in 2.8–4.6 V, LiNi_{0. 5}Mn_0.45Al_0.05O₂ shows the highest discharge capacity of about 199 mAh g^? 1 for the first cycle, and 179 mAh g^? 1 after 40 cycles, with a capacity retention of 90%. EIS analyses of the electrode materials at pristine state and state after first charge to 4.6 V indicate that the observed higher current rate capability of LiNi_{0. 5}Mn_0.45Al_0.05O₂ can be understood due to the better charge transfer kinetics.     

Studies on luminescence properties and energy transfer in Ce/Dy co-doped CaS nano-phosphors

Luminescence properties of CaS:Ce co-doped with dysprosium has been studied. Ce/Dy co-doped CaS nanophosphors (CaS:Ce_0.25Dy_0.75, CaS:Ce_0.50Dy_0.50, CaS:Ce_0.75Dy_0.25) were synthesized using the solid state diffusion method. The phase purity of the samples was confirmed using XRD data. The particle size was calculated using Debye–Scherrer formula and was found to be varying between 50 and 60 nm for all the three samples (CaS:Ce_0.25Dy_0.75, CaS:Ce_0.50Dy_0.50 and CaS:Ce_0.75Dy_0.25). TEM image analysis of CaS:Ce_0.50Dy_0.50 shows nearly spherical particles with diameter varying between 50 and60 nm. One way energy transfer from Dy³⁺ to Ce³⁺ in CaS host has been investigated using photoluminescence studies. Thermoluminescence of these nanophosphors has been studied for 0.5 Gy–21 kGy dose of gamma rays and the dose linearity of CaS:Ce_0.50Dy_0.50 has been compared with CaSO₄:Dy (standard TL dosimeter). Linear behavior over a large dose range between 0.5 Gy and 21 kGy was found for CaS:Ce_0.50Dy_0.50 as compared to CaSO₄:Dy (nanocrystalline and microcrystalline) but it is found to be less sensitive than microcrystalline CaSO₄:Dy. To identify the peaks of Ce³⁺ and Dy³⁺ in CaS, the TL spectra of CaS, CaS:Ce, CaS:Dy and CaS:Ce_0.50Dy_0.50 were recorded. The addition of dopants does not add new peaks in CaS but aid to enhance the TL emission. The peaks in CaS may be associated to intrinsic traps in the host lattice.     

Effects of Co substitution on structural and magnetic properties of R3(Fe1−xCox)29−yVy (R=Tb,Dy)

Synthesis of two novel series of intermetallic compounds Tb₃(Fe_1−xCo_x)_27.4V_1.6 (x=0,0.1, 0.2, 0.3, 0.4) and Dy₃(Fe_1−xCo_x)_27.8V_1.2 (x=0, 0.1, 0.2, 0.3) with the monoclinic Nd₃(Fe,Ti)₂₉-type structure (3:29) is presented. In the Dy series for x=0.4 a disordered variant of the hexagonal Th₂Ni₁₇-type structure is formed. The cell parameters decrease and the Curie temperature increases with increasing of the Co content. In the case of the Tb₃(Fe_1−xCo_x)_27.4V_1.6 series in the M(T) curve a magnetic transition is observed which is attributed to spin reorientation phenomena. This critical temperature decreases with increasing Co from 473 K for x=0.1 to 393 K for x=0.3, and was not observed in the case of 0.4. XRD patterns of magnetically aligned powder samples reveal the presence of a tilted magnetic structure.     

Energy gaps,charge distribution and optical properties of AlxIn1−xSb ternary alloys

The electronic and optical properties of Al_xIn_1−xSb ternary alloys have been investigated using a pseudopotential approach within the virtual crystal approximation. The effect of alloy disorder on the studied properties has been examined and found to be weak. The extent of the direct-to-indirect band gap transition is found to occur at x = 0.73. Our results agree well with those reported in the literature. Trends in bonding and ionicity are discussed by means of the electron charge distribution. The present study may be a useful information for mid-infrared inter band cascade lasers applications and other antimonide device structures.     

Suppression of superconductivity in Zn-doped SmFeAsO0.8F0.2 system

A series of SmFe_1?xZn_xAsO_0.8F_0.2 samples with x = 0, 0.05, 0.1, 0.2 and 0.4 have been successfully synthesized using a solid state method. The lattice parameters are found to increase with increasing Zn doping content. The superconductivity has been definitely suppressed by Zn doping at Fe site with the transition temperature T_c being reduced from 52.5 K to 23.3 K for the sample of x = 0.05, and to 18.2 K for the sample of x = 0.1. For the samples with x > 0.1, the superconducting transition vanishes, and, at the meantime, the spin-density-wave anomaly recovers at 140 K. The metal to semiconductor transition is also observed in the SmFe_1?xZn_xAsO_0.8F_0.2 system. The behavior of SmFe_1?xZn_xAsO_0.8F_0.2 is very different from that of R_EFeAsO (R_E = rare earth metal), which reveals a very strong electron correlation in SmFe_1?xZn_xAsO_0.8F_0.2.     

Superconducting property of Zr–Co–Al–Nb metallic glasses

The superconducting property of Zr₅₅Co_(30?x)Al₁₅Nb_x (x = 0–20 at.%) metallic glasses fabricated by rapid solidification was investigated. The Zr₅₅Co_(30–x)Al₁₅Nb_x (x = 5–20 at.%) metallic glasses with a mixture structure of amorphous and nanocrystal phases exhibited superconductivity of T_c,on = 1.8–2.6 K. The maximum T_c,on = 2.6 K was obtained for the Zr₅₅Co₁₀Al₁₅Nb₂₀ metallic glass. This was attributable to the superconducting property of nanocrystalline particles contained in the Zr₅₅Co₁₀Al₁₅Nb₂₀ alloy. The increase of Nb element in the Zr₅₅Co_(30–x)Al₁₅Nb_x alloy led to the increase of T_c,on and the decrease of glass transition temperature. The glass transition temperature was between 704 and 749 K for the Zr₅₅Co_(30–x)Al₁₅Nb_x (x = 0–20 at.%) alloys. The temperature interval of supercooled liquid state was between 51 and 68 K for the Zr₅₅Co_(30–x)Al₁₅Nb_x (x = 0–20 at.%) alloys.     

A new ternary carbide Dy2Mn2−xC5 (x=0.6): Preparation,crystal structure,and physical properties

The crystal structure, magnetic and electrical transport properties of the new ternary compound Dy₂Mn_2−xC₅ (x=0.6) have been investigated. According to X-ray powder diffraction the carbide crystallizes in its own structure type, space group I4/mmm, a=3.6421(2), c=15.7713(9) Å, R_B=0.062, R_p=0.134. The crystal structure contains isolated carbon atoms and C₂ dimers in square-bipyramidal holes and distorted bicapped square anti-prisms, respectively. Manganese atomic positions in the structure were found to be not fully occupied. Physical properties were studied in the temperature range down to 0.4 K. The electrical resistivity of Dy₂Mn_2−xC₅ (x=0.6) reveals its basically metallic nature with a positive temperature coefficient above about 30 K. A resistive anomaly at around 20 K indicates the appearance of an antiferromagnetic superzone boundary gap at low temperatures. A phase transition towards long range antiferromagnetic magnetic ordering below 19 K is further revealed by heat capacity and ac susceptibility data. Magnetization data refer to a non-trivial nature of the magnetic ground state which may be caused by the intrinsic structural disorder associated with random vacancies at the Mn site.     

Band structure of a cylindrical GaAs/AlxGa1 − xAs superwire

We investigate the existence of a band structure in GaAs/Al_xGa_1 − xsuperlattices with cylindrical symmetry, namely GaAs/Al_xGa_1 − xAs cylindrical superwires. These systems consists of a large number of concentric GaAs and Al_xGa_1 − xAs alternate cylindrical shells around a central GaAs cylindrical wire. Despite the radial configuration (that breaks the translational symmetry) and the electron confinement in the central three-dimensional well, a band structure can emerge depending on the number and thickness of the cylindrical shells.     

The growth and field evaporation of Er and deuterated Er films

The morphological structure of clean and deuterated Er films deposited on W substrates and their removal by field evaporation have been investigated as part of a program directed toward the development of deuterium ion sources for neutron generators. Annealed Er films up to ~ 20 monolayers in thickness deposited on W < 110 > substrates appear pseudomorphic. Thicker annealed films form a hexagonal close-packed < 0001 > orientated over-layer with the Pitsch–Schrader orientation relation. The pseudomorphic and hexagonal close-packed character of the films is retained up to the last atomic layer that forms the film-substrate interface. Deuterated Er films appear polycrystalline. At 77 K in Ar, annealed Er films field evaporate at 2.5 V/Å primarily as Er^2 + and deuterated Er films evaporate at ~ 2.4 V/Å primarily as ErD_x^2 +. Field evaporation of both clean and deuterated Er films shows signs of space charge induced field lowering when film thicknesses exceeding ~ 10 layers were field evaporated using 20 ns duration voltage pulses.     

Synthesis and TL glow curve analysis of BaSO4:Eu,Dy phosphor

The polycrystalline samples of Ba_1?x?ySO₄:Eu_x,Dy_y (0≤x≤1, 0≤y≤1) have been prepared using the chemical co-precipitation technique. The thermoluminescence (TL) sensitivity of the samples have been found changing with the value of x and y and the highest TL intensity is for Ba₉₆SO₄:Eu₀₂,Dy₀₂. The sample has been characterised by x-ray diffraction (XRD). The samples are found to have orthorhombic structure. For TL analysis Ba₉₆SO₄:Eu₀₂,Dy₀₂ is annealed at different temperatures ranging from 873 to 1173 K. Kinetic parameters of all the TL glow curves of Ba_1?x?ySO₄:Eu_x,Dy_y for different values of x and y and also for the TL glow curves Ba₉₆SO₄:Eu₀₂,Dy₀₂ annealed at different temperatures have been found out using computerised glow curve deconvolution (CGCD) method. The activation energy for the most intense TL peak at (444–453 K) is found out to be 1.26 eV and order of kinetics is 1.35.     

A ceria layer as diffusion barrier between LAMOX and lanthanum strontium cobalt ferrite along with the impedance analysis

A thin interlayer of samarium doped ceria (SDC) is applied as diffusion barrier between La_1 ? xSr_xCo_yFe_1 ? yO₃ x = 0.1–0.4, y = 0.2–0.8 (LSCF) cathode and La_1.8Dy_0.2Mo_1.6W_0.4O₉ (LDMW82) electrolyte to obstruct Mo–Sr diffusion and solid state reaction in the intermediate temperature range of SOFC. We demonstrate the effectiveness of the diffusion barrier through contrasting the clearly defined interfaces of LSCF/SDC/LDMW82 against a rugged growing product layer of LSCF/LDMW82 in 800 °C thermal annealing, and analyze the product composition and the probable new phase. In addition, the measured polarization resistance is considerably lower for the half-cell with a diffusion barrier. Therefore, the electrochemical performance of the LSCF cathode is investigated on the SDC-protected LDMW82. The cell with LSCF (x = 0.4) persistently outperforms the one with x = 0.2 in polarization resistance because of its small low-frequency contribution. The activation energy of polarization resistance is also lower for La_0.6Sr_0.4Co_yFe_1 ? yO₃ (112–135 kJ/mol), than that for La_0.8Sr_0.2Co_yFe_1 ? yO₃ (156–164 kJ/mol). La_0.6Sr_0.4Co_yFe_1 ? yO₃ y = 0.4–0.8 is the proper composition for the cathode interfaced to SDC/LDMW82.     

Microwave sol–gel derived NaCaGd(MoO4)3:Er3+/Yb3+ phosphors and their upconversion photoluminescence properties

Ternary molybdate NaCaGd_1−x(MoO₄)₃:Er³⁺/Yb³⁺ phosphors with the proper doping concentrations of Er³⁺ and Yb³⁺ (x = Er³⁺ + Yb³⁺, Er³⁺ = 0, 0.05, 0.1, 0.2 and Yb³⁺ = 0, 0.2, 0.45) were successfully synthesized by microwave sol–gel method for the first time. Well-crystallized particles formed after heat-treatment at 900 °C for 16 h showed a fine and homogeneous morphology with particle sizes of 3–5 μm. The optical properties were examined comparatively using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited a strong 525-nm emission band, a weak 550-nm emission band in the green region, which correspond to the ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transitions, and a very weak 655-nm emission band in the red region, which corresponds to the ⁴F_9/2 → ⁴I_15/2 transition. The optimal Yb³⁺:Er³⁺ ratio was obtained to be 9:1, as indicated by the composition-dependent quenching effect of Er³⁺ ions. The pump power dependence of upconversion emission intensity and Commission Internationale de L’Eclairage chromaticity coordinates of the phosphors were evaluated in detail.     

Electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr

The series of Gd_4 ? xM_xAl₂O_9 ? x/2 (M = Ca, Sr) with x = 0, 0.01, 0.05, 0.10 and 0.25 was prepared by the citrate complexation method. Both Gd_4 ? xCa_xAl₂O_9 ? x/2 and Gd_4 ? xSr_xAl₂O_9 ? x/2 show the monoclinic cuspidine structure with space group of P2₁/c up to 0.05–0.1 and 0.01–0.05 mol for Ca and Sr, respectively. Beyond the substitution limit of Gd₄Al₂O₉, GdAlO₃ and SrGd₂Al₂O₇ appear as additional phases. The highest electrical conductivity obtained at 900 °C yielded σ = 1.49 × 10^? 4 S/cm for Gd_3.95Ca_0.05Al₂O_8.98. In comparison, the conductivity of pure Gd₄Al₂O₉ was σ = 1.73 × 10^? 5 S/cm. The conductivities determined are in a similar range as those of other cuspidine materials investigated previously. The thermal expansion coefficient of Gd₄Al₂O₉ at 1000 °C was 7.4 × 10^? 6 K^? 1. The phase transition between 1100 and 1200 °C reported earlier changes with increasing substitution of Ca and Sr.     

Thin films of molecule-based charge transfer complex cobalt tetracyanoethylene: In situ X-ray photoemission study

Thin films of molecule-based charge transfer magnet, cobalt tetracyanoethylene [Co(TCNE)_x, x ~ 2] consisting of the transition metal Co, and an organic molecule viz. tetracyanoethylene (TCNE) have been deposited by using physical vapor deposition method under ultra-high vacuum conditions at room temperature. X-ray photoelectron spectroscopy (XPS) technique has been used extensively to investigate the electronic properties of the Co(TCNE)_x thin films. The XPS measurements show that the prepared Co(TCNE)_x films are clean, and oxygen free. The stoichiometries of the films, based on atomic sensitive factors, are obtained, and yields a ~ 1:2 ratio between metal Co and TCNE for all films. Interestingly, the positive shift of binding energy position for Co(2p), and negative shifts for C(1s) and N(1s) peaks suggest a charge-transfer from Co to TCNE, and cobalt is assigned to its Co(II) valence state. In the valence band investigation, the highest occupied molecular orbital (HOMO) of Co(TCNE)_x is found to be at ~ 2.4 eV with respect to the Fermi level, and it is derived either from the TCNE^? singly occupied molecular orbital (SOMO) or Co(3d) states. The peaks located at ~ 6.8 eV and ~ 8.8 eV are due to TCNE derived electronic states. The obtained core level and valence band results of Co(TCNE)_x, films are compared with those of V(TCNE)_x thin film magnet: a well known system of M(TCNE)_x type of organic magnet, and important points regarding their electronic properties have been brought out.     

57Fe Mössbauer spectroscopy and magnetization study of YFexAl12−x (4.4⩽x⩽5)

YFe_xAl_12−x in the composition range 4.4⩽x⩽5 was prepared by induction melting followed by annealing in vacuum at 1270 K. Magnetization data below 150 K show complex magnetic behaviour dependent on applied field, composition and temperature. The transition temperature T_c, corresponding to the main maximum of the magnetization vs. temperature curves and below which magnetic interactions are observed for a significant fraction of the Fe atoms in the Mössbauer spectra, decreases from 180 K for x=4 down to 100 K for 4.2⩽x⩽4.7 and rises again up to 160 K for x=5. The analysis of the spectra obtained at 5 K is consistent with full occupation of the 8f sites by Fe atoms and sharing of the 8j sites by Fe and Al as deduced from the Rietveld analysis of X-ray powder diffraction data. The Mössbauer spectra further show a dependence of magnetic hyperfine fields and isomer shifts on the crystallographic site and on the number of the Fe nearest neighbours similar to that observed in UFe_xAl_12−x (4⩽x⩽6) and RFe_xAl_12−x (R=Y, Lu, x=4, 4.2). The magnetic properties of the UFe_xAl_12−x and YFe_xAl_12−x series are compared and the magnetic interactions between the different Fe sublattices are discussed.