Raman studies of phase transitions in ferroelectric [C2H5NH3]2ZnCl4

The present paper accounted for the synthesis, differential scanning calorimetric and vibrational spectroscopy of [C₂H₅NH₃]₂ZnCl₄grown at room temperature. Differential scanning calorimetric (DSC) disclosed five phase transitions at T₁=231 K, T₂=234 K, T₃=237 K, T₄=247 K and T₅=312 K. The temperature dependence of the dielectric constant at different temperatures proved that this compound is ferroelectric below 238 K. Raman spectra as function temperature have been used to characterize these transitions and their nature, which indicates a change of the some peak near the transitions phase. The analysis of the wavenumber and the line width based on the order–disorder model allowed to obtain information relative to the thermal coefficient and the activation energy near the transitions phase.     

Magnetic and dielectric study of Bi2CuO4

Magnetic and dielectric properties have been investigated for Bi₂CuO₄, which has the same chemical formula as that of the parent materials of cuprate superconductors R₂CuO₄ (R: rare earths). Magnetization measurements show the antiferromagnetic transition of the Cu²⁺ spins at ～42 K, as reported previously. Dielectric measurements for the frequencies of 1 kHz to 1 MHz show that the dielectric constants are 100–500 at room temperature. The dielectric dispersion reveals that the dielectric response lacks spatial coherence, a property which indicates the possible existence of phase separation as suggested for La₂CuO₄. The imaginary part of dielectric response gives the activation energy of 0.22 eV, suggesting that the dielectric response is governed by the electron hopping between the Cu ions.     

BaT2As2 single crystals (T = Fe,Co, Ni) and superconductivity upon Co-doping

The crystal structure and physical properties of BaFe₂As₂, BaCo₂As₂, and BaNi₂As₂ single crystals are surveyed. BaFe₂As₂ gives a magnetic and structural transition at T_N = 132(1) K, BaCo₂As₂ is a paramagnetic metal, while BaNi₂As₂ has a structural phase transition at T₀ = 131 K, followed by superconductivity below T_c = 0.69 K. The bulk superconductivity in Co-doped BaFe₂As₂ below T_c = 22 K is demonstrated by resistivity, magnetic susceptibility, and specific heat data. In contrast to the cuprates, the Fe-based system appears to tolerate considerable disorder in the transition metal layers. First principles calculations for BaFe_1.84Co_0.16As₂ indicate the inter-band scattering due to Co is weak.     

High-pressure dielectric studies of a novel hydrogen-bonded ferroelectric (NH4)2H2P2O6

The hydrostatic pressure effect on the dielectric properties of (NH₄)₂H₂P₂O₆ ferroelectric crystal was studied for pressures from 0.1 MPa to 360 MPa and for temperatures from 100 to 190 K. The pressure–temperature phase diagram obtained is linear with increasing pressure. The paraelectric–ferroelectric phase transition temperature decreases with increasing pressure with the pressure coefficient dT_c/dp=?5.16×10^?2 K MPa^?1. Additionally, the pressure dependences of Curie–Weiss constants for the crystal in paraelectric (C₊) and ferroelectric (C_?) phases are evaluated and discussed. The possible mechanism of paraelectric–ferroelectric phase transition is also discussed.     

Phase transitions,ferroelectric behavior and second-order nonlinear optics of a new mixed sodium dihydrogen phosphate–arsenate

Aiming at the development of new proton conducting solids, recent studies of the NaH₂PO₄·H₂O–NaH₂AsO₄·H₂O system have lead to the synthesis of a new compound NaH₂(PO₄)_0.48(AsO₄)_0.52·H₂O (NDAP). Calorimetric studies have confirmed the presence of four reversible phase transitions (abbreviated by PhT), at 257/270 (PhT, IV), 261/290 (PhT, III), 267/301 (PhT, II) and 317/317.5 K (PhT, I) (for cooling/heating processes, respectively). It is shown that the III and IV phase transitions are of a first order type, with a “order-disorder and displacive” character, accompanied by specific dielectric anomalies. The behavior of the dielectric constant ε′_r and of tan δ shows that, at 272 K, the (PhT, IV) could be ferroelectric–paraelectric. As for the (PhT, III) at 296 K, it leads to a superionic–protonic phase; a jump in the conductivity is associated to this transition with an unusual high value of conductivity 1.07×10^?4 Ω^?1 cm^?1 and a low activation energy 0.39 eV (Kh. Jarraya et al.). Quandratic nonlinear (NLO) properties of NDAP powder was confirmed efficiency of the grown crystal by the Kurtz and Perry second harmonic generation (SHG) technique.     

Studies on structural and dielectric properties of Na1/2Dy1/2TiO3 ceramic

The polycrystalline sample of Na_1/2Dy_1/2TiO₃ ceramic was prepared by a standard high-temperature solid-state reaction technique. X-ray structural analysis confirmed the formation of single-phase (with minor secondary phase) compound in the orthorhombic (distorted tetragonal) crystal system at room temperature. Study of surface morphology by scanning electron microscope exhibits uniform distribution of rectangular/cubical grains with less voids. The elemental composition of the prepared compound was confirmed by energy dispersive X-ray spectroscopy microanalysis. Detailed studies of dielectric properties exhibit a dielectric anomaly at 94 °C suggesting a possible ferroelectric–paraelectric phase transition in the compound. The activation energy (E_a), calculated from the temperature dependence of ac conductivity plot, was found to be small (∼0.1 eV) in low temperature and large (∼0.5 eV) in high temperature region.     

Study on ethyl groups with two different orientations in [N(C2H5)4]2CuBr4

The crystal structure and phase transition temperature of [N(C₂H₅)₄]₂CuBr₄ are studied using X-ray diffraction and differential scanning calorimetry (DSC); measurements revealed a tetragonal structure and the two phase transition temperatures T_C of 204 K and 255.5 K. The structural geometry near T_C is discussed in terms of the chemical shifts for ¹H magic angle spinning (MAS) nuclear magnetic resonance (NMR) and ¹³C cross-polarization (CP)/MAS NMR. The two inequivalent ethyl groups are distinguishable by the ¹³C NMR spectrum. The molecular motions are discussed in terms of the spin–lattice relaxation times T_1ρ in the rotating frame for ¹H MAS NMR and ¹³C CP/MAS NMR. The T_1ρ results reveal that the ethyl groups undergo tumbling motion, and furthermore that the ethyl groups are highly mobile.     

Low-frequency dielectric response in the quasi-one-dimensional organic conductor (TMTSF)2PF6

A unique and rare opportunity of revealing the nature of the spin-density-wave (SDW) fluctuation in the quasi-one-dimensional organic conductor (TMTSF)₂PF₆ has been provided by our AC impedance measurements above the SDW transition temperature. A close resemblance of the low-frequency dielectric response in the range between 20 K and the temperature of maximum resistivity T_max ∼ 80 K to that in the SDW ground state was revealed, with quite compatible exponents for their power law dependencies. The SDW fluctuation has thus been identified in the 2D Fermi liquid regime, which can be regarded as a precursor phase of the SDW ground state.     

Phase formation and dielectric study of Bi doped BaTi0.75Zr0.25O3 ceramic

Perovskite types Ba_1−xBi_2x/3Ti_0.75Zr_0.25O₃ (with x = 0.0, 0.025, 0.05) ceramics have been prepared through solid state reaction route. The room temperature XRD study suggests that all the compositions have single phase cubic symmetry with space group Pm-3m. Temperature dependent dielectric studies of the ceramics have been investigated in the frequency range of 50 Hz–1 MHz. The densities of the samples are determined using Archimedes’ principle and found to be ∼98% of X-ray density. The dielectric study revealed diffuse phase transition of second order. A broad dielectric anomaly coupled with the shift of dielectric maxima toward a higher temperature with increasing frequency indicates the relaxor-type behavior in the ceramics. The diffusivity increases with increase in Bi contents in the studied composition range. The transition temperature decreases with increase in Bi contents due to the decrease in grain size.     

Soft phonons and structural phase transition in superconducting Ba0.59K0.41BiO3

We have observed a softening of phonons and a structural phase transition in a superconducting Ba_0.59K_0.41BiO₃ (T_c = 31 K) single crystal using elastic and inelastic neutron scattering measurements. The soft phonon occurs for the [1 1 1] transverse acoustic mode at the zone boundary. The phonon energies in this vicinity are found to continuously decrease with decreasing temperature from above room temperature. This softening stops at a temperature close to T_s, where a structural phase transition from cubic to tetragonal symmetry occurs. The overall results are consistent with previous data that reported phonon softening and a (0.5, 0.5, 0.5) type superstructure in several Ba_1?xK_xBiO₃ systems. However, we also find weaker (0.5, 0.5, 0) type superstructure peaks that reveal an additional component to the modulation. No significant change related to the superconductivity was observed for these soft phonon energies or linewidths.     

Specific heat of TbMn2(H,D)2

Specific heat (SH) measurements on TbMn₂(H,D)₂ powders have been performed in the temperature range from 2 to 350 K, in zero magnetic field and in 9 T. Due to the low heat conductivity of the samples, the measurements were carried out on a mixed Cu- and sample-powder pellet. For TbMn₂, the anti-ferromagnetic phase transition was manifest by a single SH peak at T_N=47 K, whereas a double SH peak at 281 and 288 K and an upturn below 5 K were observed for the hydride sample. Upon applying the magnetic field of 9 T, the SH upturn was suppressed, whereas no visible influence was found on the specific heat in the whole temperature range above 10 K as well as on the double peak.     

Magnetism in PrIr2Si2: A single crystal study

We present the results of magnetization, susceptibility and specific-heat measurements of the high-temperature (HT) and low-temperature (LT) phases of PrIr₂Si₂ performed on single-crystalline samples. The HT and LT phases adopt the tetragonal CaBe₂Ge₂-type and ThCr₂Si₂-type structure, respectively. We have found no magnetic phase transition for the HT phase at temperatures down to 2 K. On the other hand, the LT phase apparently orders antiferromagnetically (AF) at 45.5 K and undergoes a transition to another AF phase at T_t=23.7 K. Complexity of the magnetic phase diagram is amplified by two metamagnetic transitions induced by magnetic field applied along the c-axis at temperatures below T_t. The results will be discussed with respect to other polymorphic compounds PrNi₂As₂ and UCo₂Ge₂.     

Synthesis and characterization of excess magnesium MgB2 superconductor under inert carbon environment

The structural, transport and magnetic properties of MgB₂ superconductor heavily blended with Mg is studied. The samples are synthesized with a new approach in both, pressed carbon environment and in flowing argon. The excess magnesium used is observed to play dual role: one being the prevention of Mg losses during the synthesis process and hence maintaining the stoichiometry of MgB₂ phase, and second being the formation of Mg milieu probably all around the MgB₂ grains to give a dense structure. Excess Mg also improves the grain connectivity by going into the pores and there by minimizing the insulating junctions. The residual resistivity of the sample is observed to decrease from 57.02 μΩ cm to 10.042 μΩ cm as it is progressively filled with superconductor–normal–superconductor (SNS) type junctions amongst the grains by the virtue of increased magnesium content. The synthesized samples devoid of porosity show the superconducting transition, T_c in the range of 39–34 K as of clean MgB₂ samples, though overloaded with Mg. The excess Mg resulted in enhanced critical current density, J_c from 6.8 × 10³ A cm^?2 to 5.9 × 10⁴ A cm^?2 at 20 K and 10 kOe, with reasonable decrease in the superconducting transition. Thus our samples being overloaded with Mg impart mechanical strength and competitive superconducting properties, which forms a part of interest.     

Structural,magnetic and superconducting phase transitions in CaFe2As2 under ambient and applied pressure

At ambient pressure CaFe₂As₂ has been found to undergo a first order phase transition from a high temperature, tetragonal phase to a low-temperature orthorhombic/antiferromagnetic phase upon cooling through T ～ 170 K. With the application of pressure this phase transition is rapidly suppressed and by ～0.35 GPa it is replaced by a first order phase transition to a low-temperature collapsed tetragonal, non-magnetic phase. Further application of pressure leads to an increase of the tetragonal to collapsed tetragonal phase transition temperature, with it crossing room temperature by ～1.7 GPa. Given the exceptionally large and anisotropic change in unit cell dimensions associated with the collapsed tetragonal phase, the state of the pressure medium (liquid or solid) at the transition temperature has profound effects on the low-temperature state of the sample. For He-gas cells the pressure is as close to hydrostatic as possible and the transitions are sharp and the sample appears to be single phase at low temperatures. For liquid media cells at temperatures below media freezing, the CaFe₂As₂ transforms when it is encased by a frozen media and enters into a low-temperature multi-crystallographic-phase state, leading to what appears to be a strain stabilized superconducting state at low temperatures.     

Low-temperature preparation and properties of ceramics with composition (1−x)CaTiO3−xPbF2−xLiF

Fluorinated ceramics with initial composition (1−x)CaTiO₃+xPbF₂+xLiF were sintered at 950 °C. The X-ray diffraction (XRD) patterns of the samples showed the formation of a novel solid solution in the initial composition range 0⩽x⩽0.125. SEM observations were performed on fractured ceramics and DSC analyses were carried out from room temperature up to 600 °C. Three second-order phase transitions were detected for all the samples. Capacitors were prepared from the pre-sintered ceramics then dielectric measurements were performed as a function of temperature in the frequency range 10²–4×10⁷ Hz. The ε′_r−T curves exhibit the profile of dielectrics for class I capacitors, however the values of tan δ are too high (tan δ⩾1%).     

Electrochemical and magnetic properties of Li4 / 3Mn2 / 3O2–LiCoO2 solid solution

The compounds Li_(4−x)/3Mn_2(1−x)/3Co_xO₂ (0 < x < 0.5) were prepared by the sol–gel technique. X-ray diffraction patterns of these compounds were identified as α-NaFeO₂ type layered structure, though some super-structure lines, related to the ordered array of Li and transition metal ions in the transition metal layer, were observed. The magnetic susceptibility exhibited an antiferromagnetic transition around 40 K for x < 0.2, however the specimens with x > 0.3 had no magnetic transition. The magnetic percolation may explain these magnetic variations. The electrochemical performances were evaluated for the compound of x = 0.5, and it was seen that the electrochemical properties were sensitive to the potential window. Additionally, it was also found that the discharge capacity strongly depended on the preparation temperature; it took a maximum value at the preparation temperature of 900 °C. The discharge capacity is sensitive not only to the cation mixing degree but also to the particle size.     

Studies of structural and electrical properties on four-layers Aurivillius phase BaBi4Ti4O15

BaBi₄Ti₄O₁₅ (BBT) ceramic was synthesized using mixed oxide route and the structural and electrical properties were investigated systematically. The structural studies confirmed it to be an n=4 member of the Aurivillius oxide. A broad dielectric peak with frequency dependent dielectric maximum temperature was observed. The dielectric relaxation obeyed the Vogel–Fulcher relation wherein f₀=8.37E+14 Hz, E_a=0.13 eV, and T_f=608.18 K. The diffuseness parameter γ established the relaxor nature and it was attributed to the A-site cationic disorder. The specimen exhibited the excellent reproducibility in the measurements of displacement current, a remnant polarization of 5.4 μC/cm², and a coercive field of 4.03 MV/m. The room temperature piezoelectric coefficient d₃₃ was found to be 23 pC/N and the field-induced strain S was about 0.018% at the 8 MV/m electric field.     

A comparative study of the Ruddlesden-Popper series,Lan+1NinO3n+1 (n = 1, 2 and 3), for solid-oxide fuel-cell cathode applications

A comparative investigation of the much-studied La₂NiO_4+δ (n = 1) phase and the higher-order Ruddlesden-Popper phases, La_n+1Ni_nO_3n+1 (n = 2 and 3), has been undertaken to determine their suitability as cathodes for intermediate-temperature solid-oxide fuel cells. As n is increased, a structural phase transition is observed from tetragonal I4/mmm in the hyperstoichiometric La₂NiO_4.15 (n = 1) to orthorhombic Fmmm in the oxygen-deficient phases, La₃Ni₂O_6.95 (n = 2) and La₄Ni₃O_9.78 (n = 3). High temperature d.c. electrical conductivity measurements reveal a dramatic increase in overall values from n = 1, 2 to 3 with metallic behavior observed for La₄Ni₃O_9.78. Impedance spectroscopy measurements on symmetrical cells with La_0.9Sr_0.10Ga_0.80Mg_0.20O_3−δ (LSGM-9182) as the electrolyte show a systematic improvement in the electrode performance from La₂NiO_4.15 to La₄Ni₃O_9.78 with ∼ 1 Ω cm² observed at 1073 K for the latter. Long-term thermal stability tests show no impurity formation when La₃Ni₂O_6.95 and La₄Ni₃O_9.78 are heated at 1123 K for 2 weeks in air, in contrast to previously reported data for La₂NiO_4.15. The relative thermal expansion coefficients of La₃Ni₂O_6.95 and La₄Ni₃O_9.78 were found to be similar at ∼ 13.2 × 10^− 6 K^− 1 from 348 K to 1173 K in air compared to 13.8 × 10^− 6 K^− 1 for La₂NiO_4.15. Taken together, these observations suggest favourable use for the n = 2 and 3 phases as cathodes in intermediate-temperature solid-oxide fuel cells when compared to the much-studied La₂NiO_4+δ (n = 1) phase.     

Structural,dielectric and impedance properties of NaCa2V5O15 ceramics

Polycrystalline sample of NaCa₂V₅O₁₅ (NCV) with tungsten bronze structure was prepared by a mixed oxide method at relatively low temperature (i.e. 630 °C). Preliminary structural analysis of the compound showed an orthorhombic crystal structure at room temperature. Microstructural study showed that the grains are uniformly and densely distributed over the surface of the sample. Detailed studies of dielectric properties showed that the compound has dielectric anomaly above the room temperature (i.e. 289 °C), and shows hysteresis in polarization study. The electrical parameters of the compound were studied using complex impedance spectroscopy technique in a wide temperature (23–500 °C) and frequency (10²–10⁶ Hz) ranges. The impedance plots showed only bulk (grain) contributions, and there is a non-Debye type of dielectric dispersion. Complex modulus spectrum confirms the grain contribution only in the compound as observed in the impedance spectrum. The activation energy, calculated from the ac conductivity of the compound, was found to be 0.20–0.30 eV. These values of activation energy suggest that the conduction process is of mixed type (i.e. ionic–polaronic).     

Superconductivity and thermal properties of sulphur doped FeTe with effect of oxygen post annealing

Here, we report the synthesis and characterization of sulphur-substituted iron telluride i.e. FeTe_1?xS_x; (x = 0–30 %) system and study the impact of low temperature oxygen (O₂) annealing as well. Rietveld analysis of room temperature X-ray diffraction (XRD) patterns shows that all the compounds are crystallized in a tetragonal structure (space group P4/nmm) and no secondary phases are observed. Lattice constants are decreased with increasing S concentration. The parent compound of the system i.e. FeTe does not exhibit superconductivity but shows an anomaly in the resistivity measurement at around 78 K, which corresponds to a structural phase transition. Heat capacity C_p(T) measurement also confirms the structural phase transition of FeTe compound. Superconductivity appears by S substitution; the onset of superconducting transition temperature is about 8 K for FeTe_0.75S_0.25 sample. Thermoelectric power measurements S(T) also shows the superconducting transition at around 7 K for FeTe_0.75S_0.25 sample. The upper critical fields H_c2(10%), H_c2(50%) and H_c2(90%) are estimated to be 400, 650 and 900 kOe respectively at 0 K by applying Ginzburg Landau (GL) equation. Interestingly, superconducting volume fraction is increased with low temperature (200 °C) O₂ annealing at normal pressure. Detailed investigations related to structural (XRD), transport [S(T), R(T)H], magnetization (AC and DC susceptibility) and thermal [C_p(T)] measurements for FeTe_1?xS:O₂ system are presented and discussed.