Determination and correlation of solubility of tylosin tartrate in alcohol mixtures

Data on (solid + liquid) equilibrium of tylosin tartrate in {methanol + (ethanol, 1-propanol or 2-propanol)} solvents will provide essential support for industrial design and further theoretical studies. In this study, the solubility of tylosin tartrate in alcohol mixtures was measured over temperature range from (278.15 to 323.15) K under atmospheric pressure by a gravimetric method. From the experimental results, the solubility of tylosin tartrate in selected solvents noted above was found to increase with increasing temperature and mass fraction of methanol. The solubility data were correlated with the modified Apelblat equation, the λh equation and van’t Hoff equation. The results showed that the three equations agreed well with the experimental values, and that the modified Apelblat equation was more accurate than the λh equation and van’t Hoff equation. Further, the standard enthalpy, standard entropy and standard Gibbs free energy of solution of tylosin tartrate in mixed solvents were calculated according to solubility results, model parameters with modified Apelblat equation and van’t Hoff equation.     

Measurements and predictions of density and carbon dioxide solubility in binary mixtures of ethanol and n-decane

The solubility of carbon dioxide (CO₂) in binary mixtures of ethanol and n-decane has been measured using an in-house developed pressure-volume-temperature (PVT) apparatus at pressures up to 6 MPa and two different temperatures (303.2 and 323.2 K). Three different binary mixtures of ethanol and n-decane were prepared, and the densities of the prepared mixtures were measured over the studied pressure and temperature ranges. The experimental data of CO₂ solubility in the prepared mixtures and their saturated liquid densities were then reported at each temperature and pressure. The solubility data indicated that the gas solubility reduced as the ethanol mole fraction in the liquid mixture increased. The dissolution of CO₂ in the liquid mixtures resulted in the increase in the saturated liquid densities. The impact of gas dissolution on the saturated liquid densities was more pronounced at the lower temperature and lower ethanol compositions. The experimental solubility and density data were compared with the results of two cubic equations of state (EOSs), Soave–Redlich–Kwong (SRK) and Peng–Robinson (PR). The modeling results demonstrated that both EOSs could predict the solubility data well, while the saturated liquid densities calculated with the PR EOS were much better than those predicted with the SRK EOS.     

Solubility of gallic acid in liquid mixtures of (ethanol + water) from (293.15 to 318.15) K

The solubility of gallic acid in (water + ethanol) binary solvents was determined from (293.15 to 318.15) K at atmospheric pressure using a thermostatted reactor and UV/vis spectrophotometer analysis. The effects of binary solvents composition and temperature on the solubility were discussed. It was found that gallic acid solubility in (water + ethanol) mixed solvents presents a maximum-solubility effect. Two empirical equations were proposed to correlate the solubility data. The calculated solubilities show good agreement with the experimental data within the studied temperature range. Using the experimentally measured solubilities, the thermodynamic properties of dissolution of the gallic acid such as Gibbs energy (Δ_solG°), molar enthalpy of dissolution (Δ_solH°), and molar entropy of dissolution (Δ_solS°) were calculated.     

Solubility and solution thermodynamics of 2,3,4,5-tetrabromothiophene in (ethanol + tetrahydrofuran) binary solvent mixtures

The solubility of 2,3,4,5-tetrabromothiophene in (ethanol + tetrahydrofuran) binary solvent mixtures was measured within the temperature range from (278.15 to 322.15) K. The solubility increases with the rise of temperature, while it decreases with increasing ethanol content at constant temperature. The experimental data were fitted using the two variants of the combined nearly ideal binary solvent/Redlich–Kister (CNIBS/R–K) equation and the Jouyban–Acree equation, respectively. All the three equations were proven to give good representations of the experimental values. Computational results showed that the variant two of CNIBS/R–K equation was superior to the other two equations. The thermodynamic properties of the solution process, including the Gibbs free energy, enthalpy, and entropy, were calculated by the van’t Hoff analysis. The values of both the enthalpy change and the standard molar Gibbs free energy change of solution were positive, which indicated that the process was endothermic.     

Solubility of daidzin in different organic solvents and (ethyl alcohol + water) mixed solvents

The solubility of daidzin in different organic solvents and (ethyl alcohol + water) mixed solvents was measured by high performance liquid chromatography (HPLC) analysis method from T = (283.2 to 323.2) K at atmosphere pressure. The results show that at higher temperature more daidzin dissolves, and moreover, the solubility increases with the ethyl alcohol mole fraction increase in the (ethyl alcohol + water) mixed solvents. The experimental solubility values were correlated by a simplified thermodynamic equation, λh equation and modified Apelblat equation. Based on the solubility of daidzin, the enthalpy and entropy of solution were also evaluated by van’t Hoff equation. The results illustrated that the dissolution process of daidzin is endothermic and entropy driven.     

Determination and correlation of the solubility for diosgenin in alcohol solvents

Using a laser monitoring technique, the solubility of diosgenin in ethanol, 1-propanol, 1-butanol, isobutyl alcohol, tert-butanol, 1-pentanol, and iso-octyl alcohol was measured over the temperature range from (290.15 to 330.15) K at atmospheric pressure. Its corresponding (solid + liquid) equilibrium data will provide essential support for industrial design and further theoretical studies. From the experimental results, the solubility of diosgenin in ethanol, 1-propanol, 1-butanol, isobutyl alcohol, tert-butanol, 1-pentanol, and iso-octyl alcohol was found to increase with increasing temperature and decrease with the increase of the polarity of the alcohols solvents. The Apelblat equation, the ideal model and the λh equation were used to correlate the solubility values. The results showed that the three models mentioned above agreed well with the experimental data.     

Properties of pure 1-methylimidazolium acetate ionic liquid and its binary mixtures with alcohols

Densities and viscosities of the pure ionic liquid 1-methylimidazolium acetate ([Mim]Ac) and its binary mixtures with methanol, ethanol, 1-propanol, and 1-butanol were measured at temperature ranging from T = (293.15 to 313.15) K. The thermal expansion coefficient, molecular volume, standard entropy, and lattice energy of [Mim]Ac were deduced from the experimental density results. A simple linear equation was used to correlate the variation of viscosity of [Mim]Ac with temperature. Excess molar volumes V^E and viscosity deviations Δη for the binary mixtures at above mentioned temperature were calculated and fitted to the Redlich–Kister equation with satisfactory results. Excess molar volumes for {[Mim]Ac + 1-butanol} mixture have an S shape, while those for other mixtures have a negative deviation from ideal behaviour over the entire mole fraction range. Viscosity deviations are all negative deviation for {[Mim]Ac + alcohol} mixtures. The results were interpreted in terms of interactions and structural factors of binary mixtures.     

Experimental measurement and modelling of KBr solubility in water,methanol, ethanol,and its binary mixed solvents at different temperatures

A simple and accurate apparatus has been designed to measure the solubilities of potassium bromide by an analytical method. Salt solubility data have been measured in water, methanol, ethanol, (water  +  methanol), (water  +  ethanol), and (methanol  +  ethanol) solvents in the temperature range between 298.15 K and 353.15 K.A new formulation is presented for the calculation of salt solubility in pure and mixed solvents as a function of the temperature and solvent composition. This formulation is based on the symmetric convention for the normalization of the activity coefficients for all species in solution, and makes possible direct access to the solubility product of the salt in terms of its thermodynamic properties. The new solubility data measured in this work, as well as experimental information from the open literature, are used to estimate the interaction parameters of the two models proposed here. One model combines the original Universal Quasi Chemical (UNIQUAC) equation with a Pitzer–Debye–Hückel expression to take into account the long-range interaction forces; the other model only considers the short-range forces through the UNIQUAC equation with linear temperature dependent salt/solvent interaction parameters. Both models correlate satisfactorily the solubility data, although temperature and electrostatic effects are both very important in this type of equilibrium. Finally, some conclusions are drawn concerning the models versatility to represent other type of equilibrium data and prediction capabilities.     

Solution thermodynamics of pyrazinamide,isoniazid, and p-aminobenzoic acid in buffers and octanol

The solubility values of pyrazinamide, isoniazid, and p-aminobenzoic acid in buffers (рН 2.0 and 7.4) and octanol were measured in the temperature range of 293.15 to 313.15 K. The dissolution Gibbs energy, enthalpy, and entropy were calculated. The dissolving process was endothermic and enthalpy-determined. The activity coefficients of the compounds at infinite dilution were determined based on the solubility data and thermophysical parameters. A positive deviation from the ideality was observed in all the solutions. A common tendency of the solubility increase with a decrease in the activity coefficients at T = 298.15 K was revealed for the investigated solute-solvent systems. The excess thermodynamic solubility functions were calculated from the temperature dependences of the activity coefficients. The solvation processes were found to have a considerable influence on the solubility of the substances in solutions studied.     

Measurement and correlation of the solubility of 3,4-bis(3-nitrofurazan-4-yl)furoxan (DNTF) in different solvents

A knowledge of the solubility of 3,4-bis(3-nitrofurazan-4-yl)furoxan (DNTF) in different solvents is essential for crystallization and further theoretical studies. The laser monitoring system was used for measuring the solubility of DNTF in methanol, ethanol, acetic acid, benzene, toluene and n-butanol at temperatures ranging from (298.15 to 338.15) K. Polynomial empirical equation, ideal model and modified Apelblat equation were used to correlate the experimental values. The correlated results of three correlation equations present good consistency with the experimental values. In addition, the modified Apelblat equation produced higher accuracy than the polynomial empirical equation and the ideal equation. The standard dissolution enthalpy, standard dissolution entropy and the Gibbs energy were calculated from the experimental values. The solubility values of DNTF and correlation equations from this experiment would be invoked as basic data and models regarding the crystallization process of DNTF.     

Solubilities of oleanolic acid and ursolic acid in (ethanol + water) mixed solvents from T = (292.2 to 328.2) K

The solubility of oleanolic acid and of ursolic acid in (ethanol + water) mixed solvents was measured over the temperature range of (292.2 to 328.2) K. The solubility of oleanolic acid and of ursolic acid in the (ethanol + water) mixed solvent systems increase with increasing the mole fraction of ethanol in mixed solvents. The experimental solubility data are correlated by a simplified thermodynamic equation and the modified Apelblat equation.     

Measurement and correlation of solubilities of apigenin and apigenin 7-O-rhamnosylglucoside in seven solvents at different temperatures

The solubilities of apigenin and apigenin 7-O-rhamnosylglucoside in water, methanol, ethanol, 1-propanol, 1-butanol, acetone, and ethyl acetate from T = (288.2 to 328.2) K were measured. The solubilities of apigenin and apigenin 7-O-rhamnosylglucoside in selected solvents increase with increasing temperature, respectively. The experimental solubility data were correlated by a simplified thermodynamic equation and a three-parameter empirical equation.     

Thermodynamics of R-(+)-2-(4-Hydroxyphenoxy)propanoic Acid Dissolution in Methanol,Ethanol, and Methanol-Ethanol Mixture

The solubilities of R-(+)-2-(4-hydroxyphenoxy)propanoic acid (D-HPPA) in methanol, ethanol and various methanol-ethanol mixtures are determined in the temperature range from 273.15 to 323.15 K at atmospheric pressure using a laser detecting system. The solubilities of D-HPPA increase with increasing mole fraction of ethanol in the methanol–ethanol mixtures. Experimental data were correlated with Buchowski-Ksiazczak λh equation and modified Apelblat equation; the first one gives better approximation for the experimental results. The enthalpy, entropy and Gibbs free energy of D-HPPA dissolution in methanol, ethanol and methanol-ethanol mixtures were also calculated from the solubility data.     

Solubility of tridecanedioic acid in pure solvent systems: An experimental and computational study

Solubility has been extensively investigated by the phase equilibria approach at the mesoscale level, but its origin on the molecular and electronic levels is poorly understood. This study explored the solubility behaviour of crystalline solid in selected pure solvents with various functional groups by using both phase equilibria and molecular modelling methods. The model compound tridecanedioic acid (TDDA) solubility in methanol, ethanol, acetic acid, acetone, and ethyl acetate was determined from T = (283.15 to 323.15) K by a static method. It was found that almost all solutions studied exhibit non-ideal behaviour and deviate positively from Raoult’s law indicating the important role of homo-molecules interactions. Thermodynamic analyses of solution suggest that both enthalpy and entropy of solution govern the dissolution process. Computational studies on solubility behaviour were performed by using both density functional theory (DFT) calculations and molecular dynamic (MD) simulations. The results conclude that the (solute + solvent) interaction is not the only factor determining solubility, and (solvent + solvent) interaction also plays an important role. The simulated results are found to be qualitatively consistent with experimental values. Finally, solubility values were correlated by the empirically modified Apelblat equation and two local composition models of Wilson and NRTL.     

Equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures at temperatures from (278.15 to 323.15) K

The equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures was measured at elevated temperatures from (278.15 to 323.15) K using a steady-state method. With increasing temperatures, the solubility increases in aqueous solvent mixtures. The results of these results were regressed by a modified Apelblat equation. The dissolution entropy and enthalpy determined using the method of the least-squares and the change of Gibbs free energy calculated with the values of Δ_diffS^o and Δ_diffH^o at T = 278.15 K.     

Measurement and Correlation Solubility of Sodium Succinate in Binary Mixed Solvents of Water + (Methanol or Ethanol) Mixtures

The solubility of sodium succinate in binary solvent mixtures was measured by an analytical stirred-flask method in the temperature range 278.15–318.15 K at atmospheric pressure. It was found that the solubility of sodium succinate in the system increased with increasing temperature and decreased with the increasing mass fractions of methanol or ethanol. The modified Apelblat equation, the Buchwski–Ksiazaczak λh equation and the combined nearly ideal binary solvent/Redlich–Kister (CNIBS/R–K) equation were proposed for correlating the experimental data. The modified Apelblat equation was found to regress the solubility data much better than the Buchwski–Ksiazaczak equation and the CNIBS/R–K equation in a binary solvent system. The dissolution enthalpy and dissolution entropy of sodium succinate were calculated from the solubility data, using the Van’t Hoff equation. The experiment results and correlation models could be used as essential data in the purification of sodium succinate.     

Thermodynamics of solution of proto- and mezoporphyrins in N,N-dimethylformamide

This paper describes the results of thermodynamic study of dissolution of proto- and mesoporphyrins in liquid N,N-dimethylformamide (DMF) at different temperatures. Enthalpies of solution and solubility of protoporphyrin dimethylester (PDE) and mesoporphyrin dimethylester (MDE) in DMF have been obtained from T = (298 to 318) K. Free energies, enthalpies, entropies and heat capacities of solution have been computed from the combination of enthalpic and solubility data via the Gibbs–Helmholtz equation. We have shown that for all blood porphyrins this approach reproduces both free energies of solution and solubility values for the physiological temperature range.     

Thermodynamic models for determination of the solubility of dibenzothiophene in (methanol + acetonitrile) binary solvent mixtures

In this paper, we focused on solubility and solution thermodynamics of dibenzothiophene. By the gravimetric method, the solubility of dibenzothiophene was measured in (methanol + acetonitrile) binary solvent mixtures at temperatures from (278.15 to 333.15) K under atmosphere pressure. The solubility data were fitted using a modified Apelblat equation, a variant of the combined nearly ideal binary solvent/Redich–Kister (CNIBS/R–K) model and Jouyban–Acree model. Computational results showed that the modified Apelblat equation was superior to the other two equations. In addition, the thermodynamic properties of the solution process, including the Gibbs free energy, enthalpy, and entropy, were calculated by the van’t Hoff analysis. The experimental results showed that methanol could be used as effective anti-solvents in the crystallization process.     

Solubility and thermodynamic function of a new anticancer drug ibrutinib in 2-(2-ethoxyethoxy)ethanol + water mixtures at different temperatures

Ibrutinib is a recently approved anticancer drug recommended for the treatment of mantle cell lymphoma and chronic lymphocytic leukemia. It has been reported as practically insoluble in water and hence it is available in the market at higher doses. Poor solubility of ibrutinib limits its development to oral solid dosage forms only. In this work, the solubilities of ibrutinib were measured in various 2-(2-ethoxyethoxy)ethanol (Carbitol) + water mixtures at T = (298.15 to 323.15) and p = 0.1 MPa. The solubility of ibrutinib was measured using an isothermal method. The thermodynamics function of ibrutinib was also studied. The measured solubilities of ibrutinib were correlated and fitted with Van’t Hoff, the modified Apelblat and Yalkowsky models. The results of curve fitting of all three models showed good correlation of experimental solubilities of ibrutinib with calculated ones. The mole fraction solubility of ibrutinib was observed highest in pure 2-(2-ethoxyethoxy)ethanol (2.67 · 10⁻² at T = 298.15 K) and lowest in pure water (1.43 · 10⁻⁷ at T = 298.15 K) at T = (298.15 to 323.15) K. Thermodynamics data of ibrutinib showed an endothermic, spontaneous and an entropy-driven dissolution behavior of ibrutinib in all 2-(2-ethoxyethoxy)ethanol + water mixtures. Based on these results, ibrutinib has been considered as practically insoluble in water and freely soluble in 2-(2-ethoxyethoxy)ethanol. Therefore, 2-(2-ethoxyethoxy)ethanol could be used as a physiologically compatible cosolvent for solubilization and stabilization of ibrutinib in an aqueous media. The solubility data of this work could be extremely useful in preformulation studies and formulation development of ibrutinib.     

Density and surface tension of pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate and its binary mixture with alcohol and water

The density and surface tension of the pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate were measured from T (293.15 to 343.15) K. The coefficient of thermal expansion, molecular volume, standard entropy, lattice energy, surface entropy, surface enthalpy, and enthalpy of vaporization were calculated from the experimental values. Density and surface tension were also determined for binary mixtures of {1-butyl-3-methyl-imidazolium l-lactate + water/alcohol (methanol, ethanol, and 1-butanol)} systems over the whole composition range from T (298.15 to 318.15) K at atmospheric pressure. The partial molar volume, excess partial molar volume and apparent molar volume of the component IL and alcohol/water in the binary mixtures were discussed as well as limiting properties at infinite dilution and the thermal expansion coefficients of the four binary mixtures. The surface properties of the four binary mixtures were also discussed.