Diffusion of sodium alginate in aqueous solutions at T = 298.15 K

Taylor dispersion technique was used for measuring mutual diffusion coefficients of sodium alginate aqueous solutions at T = 298.15 K, by using as carrier stream solution both pure water and solutions of this polyelectrolyte at a slightly different concentration. The limiting values found at infinitesimal ionic strength, D⁰, were determined by extrapolating to c → 0. These studies were complemented by molecular mechanics calculations. From the experimental data, it was possible to estimate both the limiting conductivity and the tracer diffusion coefficient values for the alginate anion, and the hydrodynamic radius of the sodium alginate (NaC₆H₇O₆), as well as to discuss the influence of the kinetic, thermodynamic and viscosity factors on the diffusion of sodium alginate in aqueous solutions at finite concentrations. Thus, the aim of our innovative research is to contribute to a better understanding of the structure and the thermodynamic behavior of these polymeric systems in solution and supplying the scientific and technological communities with data on these important parameters in solution transport processes.     

Diffusion coefficients of nickel chloride in aqueous solutions of lactose at T = 298.15 K and T = 310.15 K

Binary mutual diffusion coefficients (interdiffusion coefficients) of nickel chloride in water at T = 298.15 K and T = 310.15 K, and at concentrations between (0.000 and 0.100) mol · dm^?3, using a Taylor dispersion method have been measured. These data are discussed on the basis of the Onsager–Fuoss and Pikal models. The equivalent conductance at infinitesimal concentration of the nickel ion in these solutions at T = 310.15 K has been estimated using these results. Through the same technique, ternary mutual diffusion coefficients (D₁₁, D₂₂, D₁₂, and D₂₁) for aqueous solutions containing NiCl₂ and lactose, at T = 298.15 K and T = 310.15 K, and at different carrier concentrations were also measured. These data permit us to have a better understanding of the structure of these systems and the thermodynamic behaviour of NiCl₂ in different media.     

Density and activity of pertechnetic acid aqueous solutions at T = 298.15 K

The previous isopiestic investigations of HTcO₄ aqueous solutions at T = 298.15 K are believed to be unreliable, because of the formation of a ternary mixture at high molality. Consequently, published isopiestic molalities for aqueous HTcO₄ solutions at T = 298.15 K were completed and corrected. Binary data (variation of the osmotic coefficient and activity coefficient of the electrolyte in solution in the water) at T = 298.15 K for pertechnetic acid HTcO₄ were determined by direct water activity measurements. These measurements extend from molality m = 1.4 mol · kg⁻¹ to m = 8.32 mol · kg⁻¹. The variation of the osmotic coefficient of this acid in water is represented mathematically. Density variations at T = 298.15 K are also established and used to express the activity coefficient values on both the molar and molal concentration scale. The density law leads to the partial molar volume variations for aqueous HTcO₄ solutions at T = 298.15 K, which are compared with published data.     

Energetic characterisation of the system (water + 1-propoxypropan-2-ol) at T = 298.15 K

Given the importance that enthalpic and entropic contributions have in the interplay between thermodynamics and self-assembly of aqueous amphiphile systems, the energetic characterisation of the system {water + 1-propoxypropan-2-ol (1-pp-2-ol)} at T = 298.15 K was made by directly measuring excess partial molar enthalpies of 1-pp-2-ol and water, over the entire composition range, at T = 298.15 K and atmospheric pressure. Derivatives of the partial molar properties with respect to the composition are used to improve the understanding of molecular interactions in the water-rich region. The present results were compared with those for the well-studied system {water + 2-butoxyethanol (nC₄E₁)}, the two amphiphiles being structural isomers.     

Densities of aqueous solutions containing model compounds of amino acids and ionic salts at T = 298.15 K

Densities of amino acids in aqueous and in aqueous electrolyte solutions have been measured by a high precision vibrating tube digital densitometer at T = 298.15 K under atmospheric pressure. The investigated systems contained amino acids of zwitterionic glycine peptides: glycine (Gly), diglycine (Gly₂), triglycine (Gly₃), and tetraglycine (Gly₄) and cyclic glycylglycine (c(GG)) with electrolytes of potassium chloride (KCl), potassium bromide (KBr) and potassium acetate (KAc). In this series of measurements, the aqueous samples were prepared with various concentrations of the amino acids, up to saturated conditions, and over salt concentrations from 1 to 4 M. The density increments resulting from the addition of the different model compounds of amino acids and the ionic salts were investigated, respectively. An empirical linear combination equation with an augmented term to account the interactions between amino acid and ionic salt was used to quantitatively correlate the experimental densities over the entire concentration ranges.     

Effect of hydrolysis on the diffusion of ferric sulphate in aqueous solutions at T = 298.15 K

Diffusion coefficients of the Fe₂(SO₄)₃)/water system at T = 298.15 K and at concentrations between 0.050 mol · dm⁻³ and 0.200 mol · dm⁻³ have been measured, using a conductimetric cell and an automatic apparatus to follow diffusion. The cell uses an open-ended capillary method. A conductimetric technique is used to follow the diffusion process by measuring the resistance of a solution inside the capillaries at recorded times. These data are discussed on the basis of the Onsager–Fuoss model. The diffusion of Fe₂(SO₄)₃ is clearly affected by the Fe (III) hydrolysis. These data permit us to have a better understanding of the structure of such systems and the thermodynamic behaviour of ferric sulphate in different media.     

Thermodynamic and optical studies of some ethylene glycol ethers in aqueous solutions at T = 298.15 K

Experimental results of density (ρ), speed of sound (u), and refractive index (n_D) have been obtained for aqueous solutions of ethylene glycol monomethyl ether (EGMME), ethylene glycol monoethyl ether (EGMEE), diethylene glycol monomethyl ether (DEGMME), and diethylene glycol monoethyl ether (DEGMEE) over the entire concentration range at T = 298.15 K. From these measurements, the derived parameters, apparent molar volume of solute (?_V), excess molar volume (V^E), isentropic compressibility of solution (β_S), apparent molar isentropic compressibility of solute (?_KS), deviation in isentropic compressibility (Δβ_S), molar refraction [R]_1,2 and deviation in refractive index of solution (Δn_D) have been calculated. The Redlich–Kister equation has been fitted to the calculated values of V^E, Δβ_S and Δn_D for the solution. The results obtained are interpreted in terms of hydrogen bonding and various interactions among solute and solvent molecules.     

The influence of 1-butyl-3-methyl-imidazolium bromide on the partitioning of l-tyrosine within the {polyethylene glycol 600 + potassium citrate} aqueous biphasic system at T = 298.15 K

Partitioning in aqueous biphasic systems (ABS) is widely recognized today as a rapid, gentle, and highly efficient technique for the separation of soluble as well as particulate biomaterials. This technique has gained increasing attention as the separation method of choice in biotechnology. In recent years, a new approach has been proposed based on the use of ionic liquids (ILs) as adjuvants for the separation and purification of bio-molecules using polymer-based ABS. In this regard, the influence of IL 1-butyl-3-methylimidazolium bromide ([C₄mim]Br) on the phase behavior and extraction capability of {PEG 600 + tri-potassium citrate (K₃C₆H₅O₇)} ABS for l-tyrosine (Tyr) is investigated here. For this purpose, phase diagrams and the liquid–liquid equilibrium (LLE) data for the {PEG 600 + K₃C₆H₅O₇} ABS with the addition of small quantities of IL were determined at T = 298.15 K. It was found that, for the studied polymer-based ABS, the addition of 5 wt% of [C₄mim]Br to ABS caused the expansion of two-phase area in the salt-rich region; while, for the PEG-rich region no change was observed. The partition coefficients of l-tyrosine (K_Tyr) within the studied system were determined at T = 298.15 K. The results obtained indicate that the addition of small quantities of [C₄mim]Br to the {PEG 600 + K₃C₆H₅O₇} ABS could enhance the extraction efficiency for l-tyrosine. In addition, the experimental data are correlated using the NRTL model. The comparisons between the correlation and the experimental data reveal a good agreement.     

Compressibility and volumetric studies of polyethylene-glycols in aqueous,methanolic, and benzene solutions at T = 298.15 K

The speed of sound and density measurements in water, methanol, and benzene solutions for the solutes PEG-400, PEG-1000, and PEG-4000 at T = 298.15 K (0.05 to 0.5 mol · kg⁻¹) are reported. The data obtained are used to calculate thermodynamic parameters such as adiabatic (isentropic) compressibility of solutions (β_ad), apparent molar volume (ϕ_V) and apparent molar compressibility (ϕ_K) for solute molecules in all the solvent media. The limiting partial molar volume $({\varphi }_V^{\circ })$ and limiting partial molar compressibility $({\varphi }_K^{\circ })$ of solute molecules are used to estimate volume of transfer and compressibility of transfer for PEG molecules from methanol to aqueous and benzene to aqueous media. The high observed negative $({\varphi }_K^{\circ })$ values in methanol are interpreted in terms of breakdown of one-dimensional H-bonded structure of methanolic molecules. The (${\varphi }_K^{\circ })$ values observed in water although negative but of small magnitude as compared to salts in water. Attempt is made to estimate hydration number for these molecules in aqueous solutions by applying Shiio’s method and it is observed that PEG-4000 is hydrated most. These results are discussed in terms of solute–solvent and hydrophobic interactions and effects due to conformational characteristic of high molecular weight glycol molecules.     

Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (h_xy, h_xxy, and h_xyy) according to the McMillan–Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients h_xy between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute–solute and solute–solvent interactions.     

Enthalpies of solution of glycylglycine and diglycylglycine in aqueous alcohols at 298.15 K

The integral enthalpies of solution of glycylglycine and diglycylglycine in water–ethanol, water–n-propanol and water–i-propanol mixtures were measured at 298.15 K and alcohol mole fraction concentrations (x₂) ranging up to 0.3 by calorimetry. The Δ_solH° and Δ_trH° vs. x₂ were found to have extrema. Enthalpic coefficients of pairwise interactions (h_xy) between peptide and alcohol molecules were positive and increased in the series ethanol, n-propanol, i-propanol.     

Standard molar volumes and expansibilities of 1,3-alkyl-N-substituted achiral glycolurils in water at T = (278.15 to 318.15) K and p = 0.1 MPa: A comparative analysis

Densities of aqueous solutions of achiral 1,3-dimethylglycoluril (1,3-DMGU) and 1,3-diethylglycoluril (1,3-DEGU) were measured using a hermetically sealed vibrating-tube densimeter, with an uncertainty of 1 · 10⁻⁵ g · cm⁻³, at T = (278.15, 288.15, 298.15, 308.15, and 318.15) K and p = (99.6 ± 0.8) kPa. The solute molality was ranged from (0.06 to 0.39) and from (0.01 to 0.07) mol · kg⁻¹ for the aqueous 1,3-DMGU and 1,3-DEGU, respectively. The standard (at infinite dilution) molar volumes and isobaric expansibilities for the 1,3-dialkyl-N-substituted glycolurils compared in water were calculated and discussed in comparison with the previously derived molar enthalpies and heat capacities of their dissolution (hydration). The temperature-dependent behavior of packing-related hydration effects was described taking into account the structural features of a solute molecule.     

Osmotic coefficients of aqueous solutions of four ionic liquids at T = (313.15 and 333.15) K

Measurements of osmotic coefficients of BmimCl (1-butyl-3-methylimidazolium chloride), HmimCl (1-hexyl-3-methylimidazolium chloride), MmimMeSO₄ (1,3-dimethylimidazolium methylsulfate), and BmimMeSO₄ (1-butyl-3-methylimidazolium methylsulfate) with water at T = (313.15 and 333.15) K are reported in this work. Vapour pressure and activity data of all the studied binary systems are obtained from experimental data. The osmotic coefficients data are correlated using the extended Pitzer model of Archer and the modified NRTL (MNRTL) model and standard deviations obtained with both models are given too. The parameters obtained with the extended Pitzer model of Archer are used to calculate the mean molal activity coefficients.