One-pot synthesis and characterization of rhodamine derivative-loaded magnetic core–shell nanoparticles

A new method to produce elaborate nanostructure with magnetic and fluorescent properties in one entity is reported in this article. Magnetite (Fe₃O₄) coated with fluorescent silica (SiO₂) shell was produced through the one-pot reaction, in which one reactor was utilized to realize the synthesis of superparamagnetic core of Fe₃O₄, the formation of SiO₂ coating through the condensation and polymerization of tetraethylorthosilicate (TEOS), and the encapsulation of tetramethyl rhodamine isothiocyanate-dextran (TRITC-dextran) within silica shell. Transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) were carried out to investigate the core–shell structure. The magnetic core of the core–shell nanoparticles is 60 ± 10 nm in diameter. The thickness of the fluorescent SiO₂ shell is estimated at 15 ± 5 nm. In addition, the fluorescent signal of the SiO₂ shell has been detected by the laser confocal scanning microscopy (LCSM) with emission wavelength (λ_em) at 566 nm. In addition, the magnetic properties of TRITC-dextran loaded silica-coating iron oxide nanoparticles (Fe₃O₄@SiO₂ NPs) were studied. The hysteresis loop of the core–shell NPs measured at room temperature shows that the saturation magnetization (M _s) is not reached even at the field of 70 kOe (7T). Meanwhile, the very low coercivity (H _c) and remanent magnetization (M _r) are 0.375 kOe and 6.6 emu/g, respectively, at room temperature. It indicates that the core–shell particles have the superparamagnetic properties. The measured blocking temperature (T _B) of the TRITC-dextran loaded Fe₃O₄@SiO₂ NPs is about 122.5 K. It is expected that the multifunctional core–shell nanoparticles can be used in bio-imaging.     

Synthesis of core–shell nanoparticles with a Pt nanoparticle core and a silica shell

A method to prepare a core–shell structure consisting of a Pt metal core coated with a silica shell (Pt(in)SiO₂) is described herein. A silica shell was grown on poly(vinylpyrrolidone) (PVP)-stabilized Pt nanoparticles 2–3 nm in size through hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) in a water/ethanol mixture with ammonia as a catalyst. This process requires precise control of the reaction conditions to avoid the formation of silica particles containing multiple Pt cores and core-free silica. The length of PVP molecules, water content, concentration of ammonia and Pt nanoparticles in solution were found to significantly influence the core–shell structure. By optimizing these parameters, it was possible to prepare core–shell particles each containing a single Pt nanoparticle with a silica layer coating approximately 10 nm thick.     

Synthesis of NiAu alloy and core–shell nanoparticles in water-in-oil microemulsions

NiAu alloy nanoparticles with various Ni/Au molar ratios were synthesized by the hydrazine reduction of nickel chloride and hydrogen tetrachloroaurate in the microemulsion system. They had a face-centered cubic structure and a mean diameter of 6–13 nm, decreasing with increasing Au content. As Au nanoparticles did, they showed a characteristic absorption peak at about 520 nm but the intensity decreased with increasing Ni content. Also, they were nearly superparamagnetic, although the magnetization decreased significantly with increasing Au content. Under an external magnetic field, they could be self-organized into the parallel lines. In addition, the core–shell nanoparticles, Ni₃Au₁@Au, were prepared by the Au coating on the surface of Ni₃Au₁ alloy nanoparticles. By increasing the hydrogen tetrachloroaurate concentration for Au coating, the thickness of Au shells could be raised and led to an enhanced and red-shifted surface plasmon absorption.     

High quality and tuneable silica shell–magnetic core nanoparticles

Obtaining small (<50 nm), monodispersed, well-separated, single iron oxide core–silica (SiO₂) shell nanoparticles for biomedical applications is still a challenge. Preferably, they are synthesised by inverse microemulsion method. However, substantial amount of aggregated and multicore core–shell nanoparticles is the undesired outcome of the method. In this study, we report on the production of less than 50 nm overall size, monodispersed, free of necking, single core iron oxide–SiO₂ shell nanoparticles with tuneable shell thickness by a carefully optimized inverse microemulsion method. The high degree of control over the process is achieved by understanding the mechanism of core–shell nanoparticles formation. By varying the reaction time and precursor concentration, the thickness of silica layer on the core nanoparticles can be finely adjusted from 5 to 13 nm. Residual reactions during the workup were inhibited by a combination of pH control with shock freezing and ultracentrifuging. These high-quality tuneable core–shell nanocomposite particles exhibit superparamagnetic character and sufficiently high magnetization with great potential for biomedical applications (e.g. MRI, cell separation and magnetically driven drug delivery systems) either as-prepared or by additional surface modification for improved biocompatibility.     

Facile preparation and characterization of hollow poly(St-co-MMA-co-BA-co-MAA) core–double shell latex nanoparticles for electrophoretic displays

Novel core–double shell particles with poly(methyl methacrylate-co-butyl acrylate) (PMMA-co-BA) as the cores, poly(methyl methacrylate-co-butyl acrylate-co-methacrylic acid) (PMMA-co-BA-co-MAA) as the inner shells, poly(styrene-co-methyl methacrylate) (PS-co-MMA) as the outer shells were prepared by soap-free emulsion polymerization. The acid–alkali osmotic swelling processes were made before the outer shells wrapped for bigger aperture. The optimal experiment conditions were summarized. The morphology and size of the hollow latex particles were observed by transmission electron microscopy. The results showed that the uniform sizes of the hollow latex particles were about 230 nm. The electrophoretic mobility of them in tetrachloroethylene was 0.91 × 10⁻¹⁰ m² V⁻¹ s⁻¹, and the Zeta-potential was 5.87 mV. The results showed that the hollow polymer particles can used as background particles.     

Synthesis and characterisation of highly fluorescent core–shell nanoparticles based on Alexa dyes

Current and future developments in the emerging field of nanobiotechnology are closely linked to the rational design of novel fluorescent nanomaterials, e.g. for biosensing and imaging applications. Here, the synthesis of bright near infrared (NIR)-emissive nanoparticles based on the grafting of silica nanoparticles (SNPs) with 3-aminopropyl triethoxysilane (APTES) followed by covalent attachment of Alexa dyes and their subsequent shielding by an additional silica shell are presented. These nanoparticles were investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and fluorescence spectroscopy. TEM studies revealed the monodispersity of the initially prepared and fluorophore-labelled silica particles and the subsequent formation of raspberry-like structures after addition of a silica precursor. Measurements of absolute fluorescence quantum yields of these scattering particle suspensions with an integrating sphere setup demonstrated the influence of dye labelling density-dependent fluorophore aggregation on the signaling behaviour of such nanoparticles.     

Synthesis and characterization of highly conductive Sn–Ag bimetallic nanoparticles for printed electronics

To synthesize low-cost, highly conductive metal nanoparticles for inkjet printing materials, we synthesized Sn–Ag bimetallic nanoparticles using a polyol process with poly(vinyl pyrrolidone). Because a surface oxidation layer forms on Sn nanoparticles, various compositions of Sn–xAg [x = 0, 20, 40, 60, 80, 100 (wt%)] nanoparticles were synthesized and characterized for the purpose of removing the β-Sn phase. The results of XPS, TEM, and XRD analyses confirm that the formation of a bimetallic phase, such as Ag₄Sn or Ag₃Sn, hinders the β-Sn phase and, consequently, leads to the removal of the surface oxidation layer. To measure the sheet resistance of various compositions of Sn–Ag nanoparticles, we made the ink that contains Sn–Ag by dispersing 10 wt% of Sn–Ag nanoparticles in methanol. The sheet resistance is decreased by the conductive Sn–Ag phases, such as the fcc, Ag₄Sn, and Ag₃Sn phases, but sharply increased by the low-conductive Sn nanoparticles and the surface oxidation layer on the Sn nanoparticles. The sheet resistance results confirm that 80Ag20Sn and 60Ag40Sn bimetallic nanoparticles are suitable candidates for inkjet printing materials.     

Size-dependent thermal stresses in the core–shell nanoparticles

The thermal stress in a magnetic core–shell nanoparticle during a thermal process is an important parameter to be known and controlled in the magnetization process of the core–shell system. In this paper we analyze the stress that appears in a core–shell nanoparticle subjected to a cooling process. The external surface temperature of the system, considered in equilibrium at room temperature, is instantly reduced to a target temperature. The thermal evolution of the system in time and the induced stress are studied using an analytical model based on a time-dependent heat conduction equation and a differential displacement equation in the formalism of elastic displacements. The source of internal stress is the difference in contraction between core and shell materials due to the temperature change. The thermal stress decreases in time and is minimized when the system reaches the thermal equilibrium. The radial and azimuthal stress components depend on system geometry, material properties, and initial and final temperatures. The magnitude of the stress changes the magnetic state of the core–shell system. For some materials, the values of the thermal stresses are larger than their specific elastic limits and the materials begin to deform plastically in the cooling process. The presence of the induced anisotropy due to the plastic deformation modifies the magnetic domain structure and the magnetic behavior of the system.     

Multifunctional core–shell nanoparticles: superparamagnetic,mesoporous, and thermosensitive

Multifunctional core–shell composite nanoparticles (NPs) have been developed by the combination of three functionalities into one entity, which is composed of a single Fe₃O₄ NP as the magnetic core, mesoporous silica (mSiO₂) with cavities as the sandwiched layer, and thermosensitive poly(N-isopropylacrylamide-co-acrylamide) (P(NIPAAm-co-AAm)) copolymer as the outer shell. The mSiO₂-coated Fe₃O₄ NPs (Fe₃O₄@mSiO₂) are monodisperse and the particle sizes were varied from 25 to 95 nm by precisely controlling the thickness of mSiO₂-coating layer. The P(NIPAAm-co-AAm) were then grown onto surface-initiator-modified Fe₃O₄@mSiO₂ NPs through free radical polymerization. These core–shell composite NPs (designated as Fe₃O₄@mSiO₂@P(NIPAAm-co-AAm)) were found to be superparamagnetic with high r ₂ relaxivity. To manipulate the phase transition behavior of these thermosensitive polymer-coated NPs for future in vivo applications, the characteristic lower critical solution temperature (LCST) was subtly tuned by adjusting the composition of the monomers to be around the human body temperature (i.e. 37 °C), from ca. 34 to ca. 42 °C. The thermal response of the core–shell composite NPs to the external magnetic field was also demonstrated. Owing to their multiple functionality characteristics, these porous superparamagnetic and thermosensitive NPs may prove valuable for simultaneous magnetic resonance imaging (MRI), temperature-controlled drug release, and temperature-programed magnetic targeting and separation applications.     

One-step sonochemical syntheses of Ni@Pt core–shell nanoparticles with controlled shape and shell thickness for fuel cell electrocatalyst

We demonstrate a facile one-step method to synthesize Ni@Pt core–shell nanoparticles (NPs) with a control over the shape and the Pt-shell thickness of the NPs. By adjusting the relative reactivity of the Pt and Ni reagents in ultrasound-assisted polyol reactions, two Ni@Pt NP samples of the same composition (Ni/Pt = 1) and size (3–4 nm) but with different particle shape (octahedral vs. truncated octahedral) and different Pt-shell thicknesses (1–2 vs. 2–3 monolayer) are obtained. The control is achieved by using different Ni reagents, Ni(acac)₂ (acac = acetylacetonate) and Ni(hfac)₂ (hfac = hexafluoroacetylacetonate). A reaction mechanism that can explain all of the observations is proposed. The Ni@Pt NPs show up to threefold higher mass activity than pure Pt NPs in oxygen reduction reaction. Between the two Ni@Pt NP samples, the one composed of octahedral NPs with the thicker Pt-shell has higher activity than the other.     

Morphology and structural stability of Pt–Pd bimetallic nanoparticles

The morphologies and structures of Pt–Pd bimetallic nanoparticles determine their chemical and physical properties.Therefore, a fundamental understanding of their morphologies and structural stabilities is of crucial importance to their applications. In this article, we have performed Monte Carlo simulations to systematically explore the structural stability and structural features of Pt–Pd alloy nanoparticles. Different Pt/Pd ratios, and particle sizes and shapes were considered.The simulated results reveal that the truncated octahedron, which has the remarkably lowest energy among all the considered shapes, exhibits the best structural stability while the tetrahedron has the worst invariably. Furthermore, all the structures of Pt–Pd alloy nanoparticles present Pd-rich in the outmost layer but Pt-rich in the sub-outmost layer. Especially, atomic distribution and chemical short-range order parameter were applied to further characterize the structural features of Pt–Pd alloy nanoparticles. This study provides a significant insight not only into the structural stability of Pt–Pd alloy nanoparticles with different compositions, and particle sizes and shapes but also to the design of bimetallic nanoparticles.     

Optical properties and ultrafast electron dynamics in gold–silver alloy and core–shell nanoparticles

Silver and gold are the two most popular metals used for many nanoparticle applications, such as surface enhanced Raman scattering or surface enhanced fluorescence, in which the local field enhancement associated with the excitation of the localized surface-plasmon–polariton resonance (SPR) is exploited. Therefore, tunability of the SPR over a wide energy range is required. For this purpose we have investigated core–shell nanoparticles composed of gold and silver with different shell thicknesses as well as the impact of alloying on these nanoparticles due to a tempering process. The nanoparticles were prepared by subsequent deposition of Au and Ag atoms or vice versa on quartz substrates followed by diffusion and nucleation. Their linear extinction spectra were measured as a function of shell thickness and annealing temperature. It turned out that different gold shell thicknesses on silver cores allow a tuning of the SPR position from 2.79 to 2.05 eV, but interestingly without a significant change on the extinction amplitude. Heating of core–shell nanoparticles up to only 540 K leads to the formation of alloy nanoparticles, accompanied by a back shift of the SPR to 2.60 eV. Calculations performed in quasi-static approximation describe the experimental results quite well and prove the structural assignments of the samples. In additional experiments, we applied the well-established persistent spectral hole burning technique to the alloy nanoparticles in order to determine the ultrafast dephasing time T ₂. We obtained a dephasing time of T ₂=(8.1±1.6) fs, in good agreement with the dephasing time of T _2,∞=8.9 fs, which is already included in the dielectric function of the bulk.     

Anomalous infrared and visible light absorption and local structure of Ag–Au core/shell nanoparticles

We measured infrared and visible light absorption spectra and EXAFS for Ag–Au core/shell particles. The shell thickness and core diameter can be evaluated from the EXAFS results, which are almost consistent with those obtained using TEM. The influence of a thinner shell only slightly appeared in the visible absorption spectra, whereas the influence appeared strongly in the infrared absorption spectra. The spectra of the material in the vicinity of the particle surface appear in the infrared spectra. On the other hand, the spectra of the rather more internal material are observed in the visible spectra. It is thought that the influence of the core metal is different in the visible spectra from the infrared spectra. By considering the penetration depth, this phenomenon can be explained.     

Encapsulation and controlled release from core–shell nanoparticles fabricated by plasma polymerization

Core–shell nanostructures have been synthesized by plasma deposition in radio-frequency plasma reactor. Silica and KCl nanoparticles were encapsulated by deposition of isopropanol-based films of amorphous hydrogenated carbon. Through control of the deposition time, under constant deposition rate of 1 nm/min, particles are encapsulated in a layer of plasma polymer with thickness between 15 and 100 nm. Films are robust, chemically inert, thermally stable up to 250°C. The permeability of the shells is determined by depositing films of various thickness onto KCl nanoparticles and monitoring the dissolution of the core in aqueous solution. The dissolution profile is characterized by an initial rapid release, followed by a slow release that lasts up to 30 days for the thickest films. The profile is analyzed by Fickian diffusion through a spherical matrix. We find that this model captures very accurately the entire release profile except for the first 12 hours during which, the dissolution rate is higher than that predicted by the model. The overall diffusion coefficient for the dissolution of KCl is 3 × 10⁻²¹ m²/s.     

One-pot aqueous synthesis of cysteine-capped CdTe/CdS core–shell nanowires

A general hydrothermal method was developed to prepare colloidal gadolinium orthovanadate nanocrystals by using supercritical water as a green solvent. The spectacular properties of supercritical water is advantageous for synthesizing crystalline and surface-modified luminescent nanoparticles capped with long alkyl chains of organic modifiers on the surface of the particles to make them dispersible in nonpolar solvents. The size of the nanoparticles could be controlled within 10–15 nm. Characterization of the hydrothermal product was accomplished using X-ray diffraction, transmission electron microscopy (TEM), high-resolution TEM, Fourier transform infrared spectroscopy, thermo gravimetric analysis, and electron dispersive X-ray scattering. The photoluminescence characterization showed that there is a strong red emission under UV excitation, which broadens the material’s various applications.     

Mn–ferrite nanoparticles via reverse microemulsions: synthesis and characterization

Mn–ferrite nanoparticles were synthesized by thermal treatment at 800 °C of manganese and iron oxo-hydroxides obtained via water-in-oil microemulsions consisting of n-hexanol as continuous phase, cetyl trimethyl ammonium bromide (CTAB) as the cationic surfactant and aqueous solutions of metal salts and precipitant agent (tetramethyl ammonium hydroxide) as reagents. Nanoparticles were synthesized using a multi-microemulsion approach. Two different co-precipitation routes are described depending on the Fe(II) or Fe(III) precursor salts. The influence of salt concentration and digestion process on the final products was examined. The nanoparticles were characterized by X-ray diffraction accompanied by Rietveld analysis, transmission electron microscopy, thermal analysis, infrared spectroscopy, and SQUID magnetometry. In all the synthesis reported in this study MnFe₂O₄ was observed only after thermal treatment at 800 °C of the as-prepared precursors. Almost spherical nanocrystalline MnFe₂O₄ ranging from 12 to 39 nm was obtained starting from chlorides or mixed chloride–sulfate salts as precursors. Low values of reduced remanent magnetization (M _r/M _s) and coercive field (H _c) induce to believe that a fraction of superparamagnetic particle is present at room temperature.     

Preparation and characterization of CuI/PVA–PEDOT:PSS core–shell for photovoltaic application

In the present paper nano polymer composite of CuI/PVA blended with PEDOT:PSS has been prepared by growing CuI nano particles inside aqueous solution of PVA. The XRD characterization illustrated the growth of CuI nano crystals of 22–33 nm. The optical absorption showed direct transition with an energy band gap equals to 1.18 eV and 1.3 eV for colloidal and thin solid films respectively. The PL investigation illustrates a quenching with increasing PEDDOT:PSS concentration. The results are interpreted according to energy confinement enhanced by plasmon–exciton interaction of CuI–PVA/PEDOT:PSS core–shell. The frequency dependence of conductivity suggested hopping conduction where the bulk conductivity is thermally activated with an activation energy in the range varies from 0.07 to 0.46 eV by increasing PEDOT:PSS concentration. The cyclic voltammetry measurements have been performed to ascertain the position of both HOMO and LUMO levels which illustrated a movement of HOMO level toward vacuum level, with a decrease in the chemical band gap from 1.72 to 1.3 eV with increasing PEDOT:PSS concentration.     

CuGaS2 hollow spheres from Ga–CuS core–shell nanoparticles

A liquid gallium emulsion was prepared as a starting material using ultrasound treatment in ethylene glycol. Core–shell particles of Ga@CuS were successfully synthesized by deposition of a CuS layer on gallium droplets through sonochemical deposition of copper ions and thiourea in an alcohol media. The core and shell of Ga@CuS products were composed of amorphous gallium metal and covellite phase CuS, which transformed into chalcopyrite CuGaS₂ hollow spheres after sulfurization at 450 °C, which was the lowest crystallization temperature. The formation of hollow nanostructures was ascribed to the Kirkendall mechanism, in which liquid gallium particles play an important role as reactive templates. In conclusion, we obtained CuGaS₂ hollow spheres with a 430 nm outer diameter and 120 nm shell thickness that had the same crystal structure and electrical properties as bulk CuGaS₂.     

Synthesis and characterization of aligned ZnO/MgO core–shell nanorod arrays on ITO substrate

ZnO/MgO core–shell nanorod arrays were synthesized successfully by the hydrothermal growth method. Photoluminescence (PL) emission from the nanorods showed remarkable enhancement after the growth of the MgO layer. The ZnO/MgO core–shell nanorods are type-I heterostructures, the electrons and holes of which are both confined in the core of the nanorods, as a result, leading to the increase of the photoluminescence intensity in this system. In addition, another reason for the enhancement of PL emission was the deposition of MgO shell suppression of surface defects. In addition, the activation energy (E _a) of 63 meV in the ZnO/MgO core–shell nanorods was obtained from temperature-dependent PL.     

Facile synthesis of SnO2–ZnO core–shell nanowires for enhanced ethanol-sensing performance

The design of core–shell heteronanostructures is powerful tool to control both the gas selectivity and the sensitivity due to their hybrid properties. In this work, the SnO₂–ZnO core–shell nanowires (NWs) were fabricated via two-step process comprising the thermal evaporation of the single crystalline SnO₂ NWs core and the spray-coating of the grainy polycrystalline ZnO shell for enhanced ethanol sensing performance. The as-obtained products were investigated by X-ray diffraction, scanning electron microscopy, and photoluminescence. The ethanol gas-sensing properties of pristine SnO₂ and ZnO–SnO₂ core–shell NW sensors were studied and compared. The gas response to 500 ppm ethanol of the core–shell NW sensor increased to 33.84, which was 12.5-fold higher than that of the pristine SnO₂ NW sensor. The selectivity of the core–shell NW sensor also improved. The response to 100 ppm ethanol was about 14.1, whereas the response to 100 ppm liquefied petroleum gas, NH₃, H₂, and CO was smaller, and ranged from 2.5 to 5.3. This indicates that the core–shell heterostructures have great potential for use as gas sensing materials.