Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas

The carbamoylphosphosphonate silane (CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl) acetamide) modified mesoporous silica was prepared via a post-synthesis grafting method for the effective purification of rare earth elements. The guest CMPO analogue was synthesized by direct coupling reaction of 2-(diphenylphosphoryl) acetic acid and 3-(triethoxysilyl)propan-1-amine. Various mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The resulting surface-modified mesoporous materials were characterized with respect to their structural integrity, surface area, and pore size and the concentration of the CMPO silane species. These CMPO functionalized periodic mesostructured silicates offer the potential of applications as catalysts, sensors, or environmental sorbents.     

Synthesis and characterization of a new monophosphate [2,5-(CH3)2C6H3NH3]H2PO4

Chemical preparation, calorimetric studies, crystal structure and spectroscopic investigations are given for a new noncentrosymmetric organic cation monophosphate [2,5-(CH₃)₂C₆H₃NH₃]H₂PO₄. This compound is orthorhombic P2₁2₁2₁ with the following unit-cell parameters: a=5.872(4), b=20.984(3), c=8.465(1) Å, Z=4, V=1043.0(5) Å³ and D_x=1.396 g cm⁻³. Crystal structure has been solved and refined to R=0.048 using 2526 independent reflections. Structure can be described as an inorganic layer parallel to (a,b) planes between which organic groups [2,5-(CH₃)₂C₆H₃NH₃]⁺ are located. Multiple hydrogen bonds connecting the different entities of compound thrust upon three-dimensional network a noncentrosymmetric configuration.     

Synthesis and hydrolysis of octacalcium phosphate and its characterization by electron microscopy and X-ray diffraction

Octacalcium phosphate (OCP) powder was produced by precipitating 250 mL Ca(CH₃COO)₂ 0.04 M into 750 L of phosphate solution (5 mmol Na₂HPO₄ and 5 mmol NaH₂PO₄) at a constant temperature of 60 °C and pH 5, which resulted in a dry white powder. X-ray diffraction (XRD), transmission electron microscopy (TEM) analysis, and the electron diffraction pattern (SAED) all showed only OCP. Hydroxyapatite (HAP) was directly obtained through hydrolysis of the powder. The total transformation of OCP into HAP was registered over a period of 6 h. During the first 30 min of hydrolysis both phases coexisted. The two phases and the OCP-HAP interface were structurally analyzed through XRD and TEM. OCP parameters (calculated by the Rietveld method) are a=19.70, b=9.50, c=6.85 Å; α=90.03°, β=92.48°, γ=108.32° (triclinic P-1) with average crystal size of 13.5±0.2 nm, while HAP parameters were a=9.45, c=6.87 Å (hexagonal P6₃/m) with average crystal size of 16.9±0.2 nm.     

Self-assembly of CuS nanoflakes into flower-like microspheres: Synthesis and characterization

Using Cu(S₂CNEt₂)₂ as a single-source precursor and ethylamine solution (65-70%) as the reaction medium, large-scale flower-like CuS microspheres have been synthesized via a solvothermal treatment in the presence of a surfactant. The products were characterized by XRD, SEM, TEM, HRTEM, and UV-vis spectrum. The assembled microspheres, with a diameter of about 2-3 μm, were composed of single-crystalline hexagonal CuS nanoflakes with a thickness of several tens of nanometers. It was revealed that the solvent medium, the surfactant, and the reaction time have great influence on the morphology and size of the resulting CuS products.     

Self-assembly and characterization of Ca-Al-LDH nanohybrids containing casein proteins as guest anions

Casein, a natural biopolymer contained in milk, has been successfully intercalated into a Ca-Al-LDH host structure. Synthesis was performed by rehydration of tricalcium aluminate in the presence of casein. The resulting nanohybrids were characterized by powder X-ray diffraction (XRD), elemental analysis, infrared spectroscopy (IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Further experiments revealed that the single protein strains intercalate instead of the entire casein sub micelles, which are present in milk. Additionally, the pure phospho protein fractions α- and β-casein, which make up ∼80 wt% of total casein were isolated and intercalated into the Ca-Al-LDH host structure, yielding a biopolymer-inorganic hybrid material.     

Synthesis and characterization of micrometric ceramic powders for electro-rheological fluids

Micrometric lamellar ceramic powders of the displacive ferroelectric oxide Bi₄Ti₃O₁₂ were synthesized by co-precipitation of bismuth nitrate and ammonia titanyl solutions followed by a heat treatment. It was found that a complete thermal decomposition is reached at 1000 °C. Structural and thermal evolution of these ceramic powders were studied by X-ray diffraction, thermogravimetry and differential thermal analysis. The homogeneity in size and morphology of these ferroelectric particles are appropriate to prepare electro-rheological fluids. One of these fluids was prepared by dispersing the powders in silicone oil; the complex cluster structure formed by the particles, under an applied AC electric field, was observed.     

In situ formation of bis(8-hydroxyquinoline) zinc(II) complex in the interlayer spaces of smectites by solid–solid reactions

Bis(8-hydroxyquinoline) zinc(II) complex (Znq₂), an electroluminescent material used for organic light emitting devices (OLEDS), formed in the interlayer spaces of smectites by solid–solid reactions between Zn(II)-smectites (Zn(II)-synthetic saponite and Zn(II)-montmorillonite) and 8-hydroxyquinoline at ambient condition. The intercalation of 8-hydroxyquinoline molecules into Zn(II)-smectites and the in situ complex formation of Znq₂ chelate in smectites were confirmed by powder XRD, FT-IR, TG–DTA, UV–vis absorption and photoluminescence spectroscopies, and elemental (CHN) analysis. The photoluminescence intensity of the Znq₂ complex in synthetic saponite was higher than that of the complex in montmorillonite, suggesting the very low content of quenching impurities in synthetic saponite. The difference in the luminescence bands were thought to be caused by the different molecular structure and molecular packing of the complex formed in the interlayer spaces.     

Synthesis and characterization of the SnO2-pillared layered titanate nanohybrid

SnO₂-pillared titanate nanohybrid has been prepared by reacting the exfoliated layered titanate sheets with the nanosized SnO₂ sol particles. The stable two-dimensional colloidal nanosheets could be obtained by intercalating tetrabutylammonium cation into the layered protonic titanate, H_xTi_2−x/4□_x/4O₄·H₂O (x=0.67) with a lepidocrocite-like structure, and by successive exfoliation process in an aqueous solution. Monodispersed SnO₂ nano sol particles were prepared by hydrolysis of SnCl₄·5H₂O in the presence of sodium hydroxide, and then the exfoliated titanate suspension was mixed with SnO₂ nano sol solution until the flocculated products formed. The final product was heated at various temperatures in order to complete the grafting reaction of intercalated SnO₂ nano sol on the interlayer surface of layered titanate. Inductive coupled plasma, X-ray diffraction, thermal analysis and N₂-adsorption-desorption isotherms were carried out to study the hybridizing process and the structure of SnO₂-pillared titanate nanohybrid.     

Synthesis and photophysics of a new deep red soluble phosphorescent iridium(III) complex based on chlorine-methyl-substituted 2,4 diphenyl quinoline

A new iridium complex with a chlorine-methyl-substituted 2,4 diphenyl quinoline, (Cl-MDPQ) ligand has been synthesized. The synthesized iridium metal complex, Ir(Cl-MDPQ)₂(acac) where Cl-MDPQ=chlorine-methyl substituted, 2,4 diphenyl quinoline, acac=acetyl acetone is characterized by employing different techniques such as mass spectrometry, ¹H NMR, DTA/TGA, XRD, and FTIR. The molecular structures of Cl-MDPQ and Ir(Cl-MDPQ)₂(acac) complexes are confirmed by the FTIR spectra. Strong singlet metal-to-ligand charge-transfer (¹MLCT) and triplet metal-to-ligand charge-transfer (³MLCT) absorption peaks at 353 and 437 nm in tetrahydrofuran (THF) are reported in the synthesized complex, respectively. A deep red emitting Ir(Cl-MDPQ)₂(acac) complex at 662 nm is promising for flexible organic devices.     

Synthesis of Cu2ZnSnSe4 compound powders by solid state reaction using elemental powders

The solid state reaction method was used to synthesize single phase and near stoichiometric Cu₂ZnSnSe₄ compound from elemental Cu, Zn, Sn and Se powders in a quartz tube furnace under an Ar flow at atmospheric pressure. These elemental powders were initially milled using zirconia balls. The α-CuSe phase was present in all of the milled powders because of the mechanical alloying effect between the Cu and Se powders. The solid state reaction mechanism was examined for the synthesis process. The phase analysis suggested that the Cu₂ZnSnSe₄ powder crystallized into the stannite phase with a high degree of crystallinity after near stoichiometric molar ratios of the powders was reacted at 500 °C for 6 h. This study showed that the solid state reaction method was a straightforward technique for the synthesis of the Cu₂ZnSnSe₄ compound powders from the elemental powders.     

Synthesis, structural and physical properties of new Terbium containing Tb-Hg-Sr-Ca-Cu-O superconducting system

Samples with various nominal compositions in the Tb-Hg-Sr-Ca-Cu-O system were prepared and studied by EDX, powder X-ray diffraction including the Rietveld refinement, electrical resistivity, magnetic susceptibility and thermoelectric power measurements. EDX and powder X-ray diffraction studies showed that Tb is required for the stabilization of the 1212, (Hg_1−yTb_y)Sr₂TbCu₂O_6+δ; y≈0.5 phase. Electrical resistivity and magnetic susceptibility measurements indicated that substitution of Tb by Ca is necessary to induce superconductivity in the 1212, (Hg_0.5Tb_0.5)Sr₂(Tb_1−xCa_x)Cu₂O_6+δ samples. The Rietveld refinements of the X-ray data of two samples with x=0.0 and 0.5 were carried out on the basis of tetragonal symmetry (space group P4/mmm) and the results indicated that the phase with x=0.5 has less puckered Cu-O planes than the Ca-free (Hg_0.5Tb_0.5)Sr₂TbCu₂O_6+δ phase. Syperconductivity is observed only for samples with x>0.2 and T_c increases with increasing Ca content, x. The results of thermoelectric power measurements suggest that the samples with x<0.8 are located in the underdoped region and the x=0.8 sample is optimally doped and exhibits the highest T_c of 88 K.     

Preparation and structural characterization of zwitterionic surfactant intercalated into NiZn-layered hydroxide salts

Three zwitterionic surfactants, dodecyl dimethyl carboxylbetaine (DCB), dodecyl dimethyl sulfobetaine (DSB) and N-dodecyl-β-aminoprpionate (DAP), intercalated into NiZn-layered hydroxide salts (NZL-DCB, NZL-DSB and NZL-DAP) were synthesized by the coprecipitation method. The effect of surfactant content, pH, temperature and time of hydrothermal treatment on preparation was investigated and discussed. The NZL-DCB, NZL-DSB and NZL-DAP were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry analysis and differential thermal analysis (TGA/DTA). The results showed that basal spacings of NZL-DCB, NZL-DSB and NZL-DAP were around 3.45, 3.68 and 3.94 nm, respectively. DCB, DSB and DAP probably form an overlapped bilayer in the gallery. TGA/DTA data indicated that NZL-DCB, NZL-DSB and NZL-DAP displayed three loss weight stages: loss of adsorbed and structural water, dehydroxylation of matrix and decomposition of nitrate ions, decomposition and combustion of surfactants. Furthermore, chemical analysis data, BET surface area and scanning electron microscopic (SEM) were also measured and analyzed.     

Study of structural and ferromagnetic properties of pure and Cd doped copper ferrite

This report presents the synthesis of copper cadmium ferrite (Cu_1−xCd_xFe₂O₄, x=0.3, 0.4, 0.5, 0.6 and 0.7) by the citrate precursor method and its subsequent characterization by X-ray diffraction (XRD), differential scanning calorimetry, infrared spectroscopy and ferromagnetic resonance. XRD results confirm the single cubic spinel phase formation with the particle size of 40 nm, which decreased up to 20 nm with increase in Cd content, while the lattice parameter increased with increase in Cd content. A significant change in the magnetic properties was observed in the CuFe₂O₄ system with Cd doping. The line width and resonance field variation against change in temperature is noted and the data is fitted to the linearlized model (LM) and Smit and Beljers (SB) model to find out the parameters. The results recorded from the SB approach are in good agreement with those observed in the magnetic measurements carried out by vibrating sample magnetometer (VSM) techniques.     

Synthesis, characterization and antibacterial action of hollow titania spheres

Hollow titania spheres were synthesized using the cationic polystyrene lattices which were prepared by polymerization in suspension of styrene using 2,2′-azobis (2-methylpropionamidine) dihydrochloride (AMPA) as an initiator. These cationic colloidal particles were dispersed in absolute ethanol in the presence of poly(vinylpyrrolidone) (PVP), solution of sodium chloride (NaCl) and mixed with ethanolic solutions of titanium tetraisopropoxide (TTIP). Subsequently, hollow spheres of titania compounds were obtained by calcinations of the so-coated polystyrene lattices at elevated temperature in air. The hollow titania spheres were characterized with scanning electron microscopy (SEM), FT-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Moreover, antibacterial action of illuminated hollow titania spheres on pure culture of Escherichia coli (E. coli) was studied. A decrease of E. coli concentration was observed after illumination of bacteria in the presence of hollow titania spheres.     

Hydrogen desorption processes in Li-Mg-N-H systems

Li-Mg-N-H systems composed of Mg(NH₂)₂ and LiH with various ratios can reversibly store a large amount of hydrogen under the temperature condition above 150 °C. These composites with 3:6, 3:8 and 3:12 ratio of Mg(NH₂)₂ and LiH have been independently reported by four groups as promising candidates of high performance hydrogen storage materials possessing the reversibility and the high capacity. In any cases, an interaction between NH₃ and LiH plays an important role for the progress of hydrogen desorbing and absorbing reactions. For the hydrogen desorption process, the NH₃ molecule generated from Mg(NH₂)₂ reacts with LiH, forming LiNH₂ and H₂. Especially, under an equilibrium condition, in situ diffraction results indicated that the single phase of LiNH₂·MgNH (LiMgN₂H₃) could be generated other than the separated two phases. As a next step, the NH₃ molecule generated from LiNH₂ reacts with LiH, desorbing H₂. As a result, the dehydrogenated phase was evaluated to be Li₂NH·MgNH (Li₂MgN₂H₂) or separated two phases, in which the final phase should depend on the experimental conditions. Thus, if the amount of LiH is enough to react with NH₃, the hydrogen desorption processes are described by the NH₃ generation from the corresponding amides and the imide.     

Synthesis and characterization of MCM-41 decorated with CuO particles

CuO particles have decorated on the external surface of MCM-41 by in situ introducing cupric nitrate during the hydrothermal synthesis followed by the calcination. The textural and structural properties of CuO/MCM-41 are compared with those of pure MCM-41. The results show that CuO particles are about 40 nm in size and are not agglomerated. The addition of cupric nitrate to the synthesis gel leads to materials with somewhat reduced quality as evidenced from X-ray diffraction patterns and nitrogen adsorption measurements. CuO/MCM-41 is less ordered relative to pure MCM-41 and there are inter-aggregate pores resulting in a higher average pore diameter in the material. The formation of CuO particles on the external surface of MCM-41 and the possible reason for the less ordered structure of CuO/MCM-41 are also discussed in the present paper.     

Hydrothermal stability of zeolites: Determination of extra-framework species of H-Y faujasite-type steamed zeolite

Zeolite H-Y of faujasite type (Si/Al=2.70) was hydrothermally treated at different temperatures in the range between 403 and 473 K for 72 h in liquid water (=saturated steam), by use of a water/H-Y zeolite ratio of 100. The batch was treated in Teflon-coated autoclaves at different temperatures and thus different steam pressures. Treated samples show growth of decomposition with increasing temperature. The parent H-Y zeolite and the hydrothermally treated H-Y zeolite samples, as well as obtained transformation products, were characterized by IR spectroscopy, water sorption uptake and XRD methods. The hydrothermal destruction process of H-Y zeolite into extra framework aluminum and silicon species is visible at 423 K and is followed by growth of kaolinite and amorphous substances such as silica and probably metakaolinite. These processes are slow at 423 K and accelerate between 443 and 473 K. The appearance of kaolinite as transformation product is experimentally identified for the first time. The structural transformation mechanism of H-Y zeolite to kaolinite, silica gel and metakaolinite was suggested and discussed.     

Multicomponent GeSe2-CdI2-TeO2 (Bi2O3) systems: glass formation and properties

The glass-forming regions of the GeSe₂-CdI₂-TeO₂ (I), GeSe₂-CdI₂-Bi₂O₃ (II) and GeSe₂-TeO₂-Bi₂O₃ (III) systems have been determined. The obtained glassy phases have been characterized by their basic physicochemical parameters such as temperatures of glass transition, crystallization, and melting, density and microhardness. The phase T-X diagram of the GeSe₂-CdI₂ system, which is the basic joint line for systems I and II, has been specified. Three non-variant equilibria (two eutectic and one syntectic) have been observed at temperatures 350, 280 and 375 °C for compositions containing 15, 95 and 33.3 mol% GeSe₂, respectively. A new intermediate phase with probable composition of 2CdI₂·GeSe₂ has been formed.     

Effects of vitrification suppression on structure morphology, conductivity and dielectric properties of vanadium phosphate glasses

Vitrification suppression in the (V₂O₅)_1−x (P₂O₅)_x glasses where x=0.10, 0.15, 0.20, and 0.25 was controlled by changing the rate of quenching glasses. The structure variations occurring in the glasses were detected by differential thermal analysis and optical microscope. The results implied the separation and growth of V₂O₅ orthorhombic microcrystal in the samples with x=0.10 and 0.15 whereas other samples did not illustrate remarkable changes in their microstructure. However, in temperature range between 300 and 473 K a semiconducting behavior for all samples appears during the study of electrical conductivity-temperature dependence. A decrease in conductivity values accompanied with some variations in activation energies by reducing quenching rate was observed. The conductivity results suggested that the conduction occurs by the phonon assisted hopping of a small polaron between V⁴⁺ and V⁵⁺ states at relatively higher temperature range above θ_D/2. Whereas at relatively low temperatures the conduction may occur by electron jumping between filled and empty states at Fermi level in the disordered matrix besides polaronic conduction. Reasonable values for the density of localized states, carrier concentration and carrier mobility were estimated and discussed. Also, dielectric constant and dielectric loss were studied as a function of frequency at different temperatures confirming the structure variations in the glass system.     

Effects of preheating on diaspore: Modifications in colour centres, structure and light emission

The thermal properties and thermal stability of diaspore-corundum (AlOOH-Al₂O₃), from Goian (Pontevedra, Spain) were studied by means of differential thermal analysis (DTA), thermogravimetry (TG), high temperature X-ray diffraction (HTXRD) and thermally stimulated luminescence (TL) techniques. The samples were annealed to link the combined effect of (i) dehydroxylation, (ii) oxidation-reduction of chromophores (Mn 0.5%, Fe₂O₃ 0.12%, TiO₂ 0.021% and Cr 80 ppm) determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and (iii) phase transitions whilst sample heating (i.e. α-AlOOH→α′-Al₂P₃→α-Al₂O₃). The blue colour of diaspore, attributed to the Ti⁴⁺-Fe²⁺ intervalence-charge-transfer mechanism, turns to white (circa 500 °C) in good agreement with the DTA endothermic peak (dehydroxylation). The coexistence of α-AlOOH and α′-Al₂P₃ phases has been detected by in situ HTXRD and could be correlated to the thermoluminescence tests performed on preheated aliquots (up to 500 °C).