1-丁腈-3-甲基咪唑双三氟甲基磺酸亚胺的性质

制备了功能化离子液体1-丁腈-3-甲基咪唑双三氟甲基磺酸亚胺。在T为283.15-353.15 K温度范围内,测定了该功能化离子液体的密度、动力粘度、电导率及折光率。讨论了亚甲基的增减对该类功能化离子液体的密度、动力粘度、电导率及折光率等性质的影响,并与传统咪唑类、吡啶类离子液体物理化学性质的变化趋势进行了对比。通过经验方程计算了该功能化离子液体的热膨胀系数、分子体积、标准摩尔熵及晶格能等热力学性质参数。讨论了Vogel-Fulcher-Tamman (VFT)方程和Arrhenius方程的适用性,得出VFT方程适用于该功能化离子液体,而Arrhenius方程并不适用。有关研究对新型离子液体的合成及其工业化的应用具有十分重要的意义。     

Synthesis,physical, and thermodynamic properties of 1-alkyl-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide ionic liquids

Synthesis of new ionic liquids (ILs) viz. 1-butyl-3-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [BCN³Py][NTf₂], 1-hexyl-3-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [HCN³Py][NTf₂], 1-hexyl-4-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [HCN⁴Py][NTf₂], and 1-octyl-3-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [OCN³Py][NTf₂] were performed. The specific basic characterization of new compounds by NMR spectra, elementary analysis, water content and glass transition temperature as well as melting temperature, enthalpy of fusion and decomposition of compounds TG/DTA determined by the differential scanning calorimetry, DSC is presented. The heat capacity was measured at three temperatures (298.15, 323.15, and 353.15) K and at pressure 0.1 MPa. The effect of temperature on the density and viscosity is reported over the temperature range from (293.15 to 363.15) K and at 0.1 MPa. The density and viscosity correlation for these systems was provided by an empirical polynomial. From the density–temperature dependence, the isothermal expansion coefficient (volume expansivity), α, was calculated. The surface tension of pure ionic liquids was measured at 0.1 MPa at five temperatures (298.15, 308.15, 318.15, 328.15, and 338.15) K. The surface thermodynamic functions such as surface entropy and enthalpy, critical temperatures according to the Eötvös and Guggenheim definition and the total surface energy of the ILs studied were derived from the temperature dependence of the surface tension values. The parachor and speed of sound for pure ionic liquids were described within a range of temperature from (298.15 to 338.15) K. A qualitative analysis on these quantities in terms of molecular interactions is reported.     

A comprehensive study of {γ-butyrolactone + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide} binary mixtures

Density, electrical conductivity and viscosity of binary liquid mixtures of γ-butyrolactone, (GBL) with 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, [pmim][NTf₂], were measured at different temperatures from (293.15 to 323.15) K and at atmospheric pressure (p = 0.1 MPa) over the whole composition range. Excess molar volumes have been calculated from the experimental densities and were fitted with Redlich–Kister’s polynomial equation. Other volumetric properties have been also calculated in order to obtain information about interactions between GBL and selected ionic liquid. All the results are compared with those obtained for binary mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf₂], with GBL. From the viscosity measurements, the Angell strength parameter was calculated for pure ionic liquid indicating that [pmim][NTf₂] is a “fragile” liquid. Electrical conductivity results were discussed in the scope of Bahe–Varela theoretical model.     

1-Alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids as solvents in the separation of azeotropic mixtures

(Liquid + liquid) equilibrium data for the ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMim][NTf₂], 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [BMim][NTf₂], and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [HMim][NTf₂], mixed with ethanol and heptane were studied at T = 298.15 K and atmospheric pressure. The ability of these ionic liquids as solvents for the extraction of ethanol from heptane was evaluated in terms of selectivity and solute distribution ratio. Moreover, density and refractive index values over the miscible region for the ternary mixtures were also measured at T = 313.15 K. Finally, the experimental data were correlated with the Non Random Two Liquids (NRTL) and UNIversal QUAsi Chemical (UNIQUAC) thermodynamic models, and an exhaustive comparison with available literature data of the studied systems was carried out.     

Phase equilibria study of the binary systems (ionic liquid + thiophene): Desulphurization process

(Solid + liquid) equilibria (SLE) and (liquid + liquid) equilibria (LLE) for the binary systems: {ionic liquid (IL) N-butyl-4-methylpyridinium tosylate (p-toluenesulfonate) [BM⁴Py][TOS], or N-butyl-3-methylpyridinium tosylate [BM³Py][TOS], or N-hexyl-3-methylpyridinium tosylate [HM³Py][TOS], or N-butyl-4-methylpyridinium bis{(trifluoromethyl)sulfonyl}imide [BM⁴Py][NTf₂], or 1,4-dimethylpyridinium tosylate [M^1,4Py][TOS], or 2,4,6-collidine tosylate [M^2,4,6Py][TOS], or 1-ethyl-3-methylimidazolium thiocyanate [EMIM][SCN], or 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN], or 1-hexyl-3-methylimidazolium thiocyanate [HMIM][SCN], or triethylsulphonium bis(trifluoromethylsulfonyl)imide [Et₃S][NTf₂] + thiophene} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 390) K. In the case of systems (pyridinium IL, or sulphonium IL + thiophene) the mutual immiscibility with an upper critical solution temperature (UCST) was detected at the very narrow and low mole fraction of the IL. For the binary systems containing (imidazolium thiocyanate IL + thiophene), the mutual immiscibility with the lower critical solution temperature (LCST) was detected at the higher mole fraction range of the IL. The basic thermal properties of the pure ILs, i.e. melting and glass-transition temperatures as well as the enthalpy of fusion have been measured using a differential scanning microcalorimetry technique (DSC). The well-known NRTL equation has been used to correlate experimental SLE/LLE data sets.     

Density,excess properties,electrical conductivity and viscosity of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide + γ-butyrolactone binary mixtures

Density, electrical conductivity and viscosity of binary liquid mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf₂], with γ-butyrolactone (GBL) were measured at temperatures from (293.15 to 323.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes have been calculated from the experimental densities and were fitted with Redlich–Kister polynomial equation. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes, apparent molar volumes and partial molar volumes at infinite dilution have been also calculated, in order to obtain information about interactions between GBL and selected ionic liquid.     

Isotope effects on miscibility of 1-alkyl-3-methylimidazolium bis(trifluoromethyl)sulfonyl imides with aromatic hydrocarbons

The liquid–liquid miscibility temperatures as a function of composition and deuterium substitution have been experimentally determined for the binary mixtures of 1-decyl-3-methylimidazolium bis(trifluoromethyl)sulfonyl imide, [C₁₀MIM][NTf₂], and 1-dodecyl-3-methylimidazolium bis(trifluoromethyl)sulfonyl imide, [C₁₂MIM][NTf₂] with benzene and toluene and their deuterated forms. All systems exhibit upper critical solution temperatures (UCSTs) and better miscibility for ionic liquids with longer alkyl chain. The interchange of benzene for toluene results in worse miscibility for [C₁₀MIM][NTf₂] and better for [C₁₂MIM][NTf₂]. Deuteration of the aromatics leads to better miscibility in each case. The sign of the isotope effect is in agreement with expectations and its value seems to be seriously affected by the neighborhood of the hypercritical state.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

Ethanol extraction from its azeotropic mixture with hexane employing different ionic liquids as solvents

In this work, the ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMim][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [BMim][NTf₂], 1-butyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide, [BMpy][NTf₂], 1-butyl-3-methylpyridinium trifluoromethanesulfonate, [BMpy][TfO], have been investigated for their use as solvents in extraction processes for the ethanol removal from its azeotropic mixture with hexane. Therefore, the experimental determination of the liquid + liquid equilibrium for the ternary systems {hexane (1) + ethanol (2) + [EMim][NTf₂] (3)}, {hexane (1) + ethanol (2) + [BMim][NTf₂] (3)}, {hexane (1) + ethanol (2) + [BMpy][NTf₂] (3)} and {hexane (1) + ethanol (2) + [BMpy][TfO] (3)} was carried out at T = 298.15 K and atmospheric pressure. Classical parameters such as selectivity and solute distribution ratio, derived from the tie-line data, were calculated and afterwards, the structural influence of the ionic liquids on the extraction process was analyzed. Finally, the experimental LLE data were correlated by means of the NRTL and UNIQUAC models.     

两种疏水型膦类离子液体的密度、动力粘度及电导率

Two air and water stable hydrophobic phosphonium ionic liquids (ILs), tributyl-hexylphosphonium tetrafluoroborate ([P4446][BF4]) and tributyl-hexylphosphonium bis (trifluoromethylsulfonyl) imide ([P4446][NTf2]), were prepared by the traditional method. Their basic physico-chemical properties of density, dynamic viscosity, and electrical conductivity were measured in the temperature range of 283.15-353.15 K. The effect of the temperature and structure of the anion on the thermodynamic properties were discussed. The properties are compared with the cation structures changing of the phosphonium type ILs. The most important thermodynamic properties for their practical application, such as molecular volume, standard molar entropy, and lattice energy, were calculated from their density using empirical equations. The calculated values were compared with those of imdazolium and pyridinium type ILs. Molar electrical conductivity was determined from density and electrical conductivity. The applicability of the Vogel-Fulcher-Tamman (VFT) and Arrhenius equations to the fitting of the dynamic viscosity and electrical conductivity was validated. The activation of the electrical conductivity and dynamic viscosity were obtained from the final VFT equation. According to the Walden rule, the density, dynamic viscosity, and electrical conductivity were described by the Walden equation. The results are very important for academic studies as well as industrial applications of these ILs.     

Density and viscosity of three (2,2,2-trifluoroethanol + 1-butyl-3-methylimidazolium) ionic liquid binary systems

Densities and viscosities were determined for binary mixtures of 2,2,2-trifluoroethanol (TFE) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) or 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([bmim][NTf₂]) over the entire range of composition. The experimental measurements were carried out at temperatures ranging from 278.15 K to 333.15 K, at atmospheric pressure. The densities and viscosities of the pure ionic liquids and their mixtures with TFE were described successfully by an empirical third-order polynomial and by the Vogel–Fulcher–Tammann equation, respectively. In addition, excess molar volumes and viscosity deviations were determined from densities and viscosities of mixtures, respectively, and fitted by using the Redlich–Kister equation.     

Solubility,volumetric properties and viscosity of the sustainable systems of liquid poly(ethylene glycol) 200 with imidazolium- and phosphonium-based ionic liquids: Cation and anion effects

In this work, solubility, volumetric and viscosity behavior were studied for the systems containing the environmentally acceptable compounds: liquid poly(ethylene glycol) (PEG200) and three ionic liquids: 1-butyl-3-methylimidazolium dicyanamide ([C₄mim][dca]), trihexyltetradecyl phosphonium dicyanamide ([P_6,6,6,14][dca]) and 1-hexyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ([C₆mim][NTf₂]). The studies were performed in a temperature range (288.15 to 328.15) K and at a pressure of 0.1 MPa. For the only system that evidenced limited miscibility, namely (PEG200 + [P_6,6,6,14][dca]), the temperature-composition phase diagram at 0.1 MPa was determined, mapping the existing one- and two-phase regions. In the homogeneous region of this diagram, densities and viscosities were measured and the excess molar volumes, as well as deviations in viscosity were calculated. For the other two systems, as they are always homogeneous in the temperature ranges of the present work, these measurements and calculations were performed in the full range of compositions. The molecular interactions in the studied systems were scrutinized using the obtained excess molar volumes, deviations of viscosity, as well as Kamlet–Taft parameters of PEG200 and the ionic liquids. In addition, the excess molar Gibbs free energies of activation of viscous flow and the related enthalpies and entropies were calculated and introduced to take into consideration the differences in size of the molecules.     

Effect of the temperature on the physical properties of pure 1-propyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide and characterization of its binary mixtures with alcohols

In this paper, physical properties of a high purity sample of the ionic liquid 1-propyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [PMim][NTf₂], and its binary mixtures with methanol, ethanol, 1-propanol, and 2-propanol were measured at atmospheric pressure. The temperature dependence of density, refractive index and speed of sound (293.15 to 343.15) K and dynamic viscosity (298.15 to 343.15) K were studied at atmospheric pressure by conventional techniques for the pure ionic liquid. For its mixtures with alcohols, density, speed of sound, and refractive index were measured at T = 298.15 K over the whole composition range. The thermal expansion coefficient of the [PMim][NTf₂] was calculated from the experimental results using an empirical equation, and values of the excess molar volume, excess refractive index, and excess molar isentropic compressibility for the binary systems at the above mentioned temperature, were calculated and fitted to the Redlich–Kister equation. The heat capacity of the pure ionic liquid at T = 298.15 K was determined using DSC.     

Effect of temperature and composition on the density,viscosity, surface tension,and thermodynamic properties of binary mixtures of N-octylisoquinolinium bis{(trifluoromethyl)sulfonyl}imide with alcohols

Density and viscosity were determined for the binary mixtures containing the ionic liquid N-octylisoquinolinium bis{(trifluoromethyl)sulfonyl}imide ([C₈iQuin][NTf₂]) and 1-alcohol (1-butanol, 1-hexanol, and 2-phenylethanol) at five temperatures (298.15, 308.15, 318.15, 328.15, and 338.15) K and ambient pressure. The density and viscosity correlations for these systems were tested by an empirical second-order polynomial and by the Vogel–Fucher–Tammann equation. Excess molar volumes were described by the Redlich–Kister polynomial expansion. The density and viscosity variations with compositions were described by polynomials. Viscosity deviations were calculated and correlated by the Redlich–Kister polynomial expansions. The surface tensions of pure ionic liquid and binary mixtures of [C₈iQuin][NTf₂] with 1-hexanol were measured at atmospheric pressure at three temperatures (298.15, 308.15, and 318.15) K. The surface tension deviations were calculated and correlated by the Redlich–Kister polynomial expansion. The surface thermodynamic functions such as surface entropy and enthalpy were derived from the temperature dependence of the surface tension values. The critical temperature, parachor, and speed of sound for pure ionic liquid were described. A qualitative analysis on these quantities in terms of molecular interactions is reported. The obtained results indicate that ionic liquid interactions with alcohols are strong dependent on the special trend of packing effects and hydrogen bonding of this ionic liquid with hydroxylic solvents. As previously observed, an increase by a 1-alcohol carbon chain length leads to lower interactions on mixing.     

Thermodynamic properties of the N-butylisoquinolinium bis(trifluoromethylsulfonyl)imide

A new isoquinolinium ionic liquid (IL) has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterization of synthesized compounds: N-isobutylquinolinium bromide, [BiQuin][Br] and N-isobutylquinolinium bis{(trifluoromethyl)sulfonyl}imide [BiQuin][NTf₂] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [BiQuin][NTf₂], i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at glass transition have been measured using a differential scanning microcalorimetry technique (DSC). Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 8 binary mixtures composed of organic solvent dissolved in the IL: {[BiQuin][NTf₂] + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fraction and temperature from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with an immiscibility gap in the liquid phase existing at low mole fraction of the IL with a very high upper critical solution temperature (UCST). For mixtures with alcohols, complete miscibility was observed for 1-butanol and also an immiscibility gap with UCST in the liquid phase for the remaining alcohols. The typical dependence was observed that with increasing chain length of an alcohol, the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Thermophysical properties and phase equilibria study of the binary systems {N-hexylquinolinium bis(trifluoromethylsulfonyl)imide + aromatic hydrocarbons,or an alcohol}

The new quinolinium ionic liquid has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterisation of synthesized compounds: N-hexylquinolinium bromide, [HQuin][Br] and N-hexylquinolinium bis{(trifluoromethyl)sulfonyl}imide [HQuin][NTf₂] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [HQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity have been measured using a differential scanning microcalorimetry technique (DSC) and thermal analysis instrument (TA). Densities and viscosities were determined as a function of temperature. Phase equilibria for the binary systems: {[HQuin][NTf₂]) + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol)} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with immiscibility gap in the liquid phase beginning from (0.13 to 0.28) mole fraction of the IL with very high an upper critical solution temperature (UCST). For mixtures with alcohols, the complete miscibility was observed for 1-butanol and immiscibility with UCST in the liquid phase for the remaining alcohols. The typical dependence was observed, that with increasing chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibria data sets. For the systems containing immiscibility gaps, (IL + an alcohol) parameters of the LLE correlation were used to the prediction of SLE.     

Thermodynamic properties of the N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide

This work is a continuation of our wide ranging investigation on quinolinium based ionic liquids (ILs). The study includes specific basic characterisation of the synthesized compounds N-octylquinolinium bromide, [OQuin][Br] and N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide [OQuin][NTf₂] by NMR spectra, elementary analysis and water content. Differential scanning calorimetry (DSC) measurements gave us properties of the pure [OQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at the glass transition. Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 10 binary mixtures composed of organic solvent dissolved in the IL: {[OQuin][NTf₂] + aromatic hydrocarbon (benzene, or thiophene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol, or 1-dodecanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (250 to 370) K. For mixtures with benzene and alkylbenzenes, the immiscibility gap in the liquid phase in a low mole fraction of the IL was observed with upper critical solution temperature (UCST) higher than the boiling point of the solvent. In the system with thiophene, the immiscibility gap is lower and UCST was measured. For binary mixtures with alcohols, complete miscibility in the liquid phase was observed for 1-butanol and 1-hexanol. In the systems with longer chain alcohols, the immiscibility gap with UCST was noted. Typical behaviour for ILs was observed with an increase of the chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Thermodynamic properties and polymorphism of 1-alkyl-3-methylimidazolium bis(triflamides)

Heat capacities in a range of temperatures of (5 to 370) K, enthalpies and temperatures of phase transitions for 1-ethyl-3-methylimidazolium bis(triflamide) ([C₂mim][NTf₂]) and 1-octyl-3-methylimidazolium bis(triflamide) ([C₈mim][NTf₂]) have been determined by adiabatic calorimetry. [C₂mim][NTf₂] has been found to form four crystalline phases with different fusion temperatures. Formation of the phases can be controlled by the temperature of annealing during crystallization. [C₈mim][NTf₂] forms three sequences of crystalline modifications, each including two polymorphs. Based on results of the measurements, thermodynamic functions for the compounds under study have been calculated.A heat-capacity anomaly near T = 230 K reported earlier for [C₄mim][NTf₂] and [C₆mim][NTf₂] have been found in some crystalline modifications of both the studied compounds. The position of the anomaly depends on the temperature of annealing of the crystals.     

Quaternary phosphonium-based ionic liquids: Thermal stability and heat capacity of the liquid phase

In spite of the great importance of calorimetric data on phosphonium-based ionic liquids (PBILs), the information available in the literature is quite limited. This work reports the study of the thermal stability and the determination of heat capacity of the following (PBILs): tributyl(methyl)phosphonium methyl sulfate, [(C₄)₃PC₁][MeSO₄], trihexyl-tetradecylphosphonium chloride, [(C₆)₃PC₁₄][Cl], trihexyl-tetradecyl-phosphonium dicyanamide, [(C₆)₃ PC₁₄][DCA], trihexyl-tetradecylphosphonium bis((trifluoromethyl)sulfonyl) imide, [(C₆)₃ PC₁₄][NTf₂], and trihexyl-tetradecylphosphonium tris(pentafluoroethyl)trifluorophosphate, [(C₆)₃ PC₁₄][FAP]. Measurements on the well-known IL 1-ethyl-3-methylimidazoliumbis((trifluoromethyl)sulfonyl)imide, [EMIM][NTf₂], were also performed for comparative purposes. The thermal stability was assessed by conventional and high resolution modulated thermogravimetric analysis within the interval (303 to 873) K. The heat capacity was measured by modulated differential scanning calorimetry within the range (310 to 515) K with an uncertainty in the range (1 to 5) J · K^?1 · mol^?1. The experimental results were correlated using polynomial expressions. The Joback method for predicting ideal gas heat capacities was used in conjunction with the principle of corresponding states and the modified Lydersen–Joback–Reid method to predict the heat capacity of the ILs. The methods due to Valderrama et al. were also used with the same purpose.     

PVT properties for binary ionic liquids of 1-methyl-1-propylpiperidinium bis(trifluoromethylsulfonyl)imide with anisole or acetophenone at pressures up to 50 MPa

Densities of pure 1-methyl-1-propylpiperidinium bis(trifluoromethylsulfonyl)imide, [C₃mpip][NTf₂], and its mixtures with anisole or acetophenone were measured with a high-pressure densimeter at temperatures from 298.15 K to 348.15 K and pressures up to 50 MPa. The Tait equation was employed to represent pressure effect on the isothermal densities. The experimental results reveal that the excess volumes of (anisole + [C₃mpip][NTf₂]) and (acetophenone + [C₃mpip][NTf₂]) are all negative over the entire experimental conditions. In addition to an empirical generalized equation, the density data were also correlated quantitatively with the Flory–Orwoll–Vrij (FOV) and the Schotte equations of state.