Synthesis of amphiphilic block copolymer consisting of glycopolymer and poly(l‐lactide) and preparation of sugar‐coated polymer aggregates

The block glycopolymer, poly(2‐(α‐d ‐mannopyranosyloxy)ethyl methacrylate)‐b‐poly(l ‐lactide) (PManEMA‐b‐PLLA), was synthesized via a coupling approach. PLLA having an ethynyl group was successfully synthesized via ring‐opening polymerization using 2‐propyn‐1‐ol as an initiator. The ethynyl functionality of the resulting polymer was confirmed by MALDI‐TOF mass spectroscopy. In contrast, PManEMA having an azide group was prepared via AGET ATRP using 2‐azidopropyl 2‐bromo‐2‐methylpropanoate as an initiator. The azide functionality of the resulting polymer was confirmed by IR spectroscopy. The Cu(I)‐catalyzed 1,3‐dipolar cycloaddition between PLLA and PManEMA was performed to afford PManEMA‐b‐PLLA. The block structure was confirmed by ¹H NMR spectroscopy and size exclusion chromatography. The aggregating properties of the block glycopolymer, PManEMA_16k‐b‐PLLA_6.4k (M _n,PManEMA = 16,000, M _n,PLLA = 6400) was examined by ¹H NMR spectroscopy, fluorometry using pyrene, and dynamic light scattering. The block glycopolymer formed complicated aggregates at concentrations above 21 mg·L^?1 in water. The d ‐mannose presenting property of the aggregates was also characterized by turbidimetric assay using concanavalin A. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 395–403     

Nanostructured polybenzoxazine thermosets via reaction‐induced microphase separation

A multiblock copolymer consisting of main‐chain polybenzoxazine and poly(propylene oxide) blocks was synthesized via Mannich polycondensation among 4,4′‐dihydroxyldiphenylisopropane, 4,4′‐diaminodiphenylmethane, amino‐terminated poly(propylene oxide), and paraformaldehyde, which was evidenced by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The multiblock copolymer was incorporated into polybenzoxazine to access the nanostructured polybenzoxazine thermosets. The morphology of the thermosets was investigated by means of atomic force microscopy and small angle X‐ray scattering. It was judged that the formation of the nanostructures in the thermosetting composites follows the mechanism of reaction‐induced microphase separation. Owing to the big difference in thermal stability between polybenzoxazine thermosets and poly(propylene oxide), the nanostructured thermosets were subjected to the pyrolysis at moderate elevated temperatures to remove poly(propylene oxide) microdomains, to access the nanoporous polybenzoxazine thermosets. The nanoporosity of the resulting polybenzoxazine thermosets was investigated by means of Fourier transform infrared spectroscopy and field‐emission scanning electronic microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1148–1159, 2010     

Amphiphilic star‐block copolymers based on a hyperbranched core: Synthesis and supramolecular self‐assembly

Novel amphiphilic star‐block copolymers, star poly(caprolactone)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] and poly(caprolactone)‐block‐poly(methacrylic acid), with hyperbranched poly(2‐hydroxyethyl methacrylate) (PHEMA–OH) as a core moiety were synthesized and characterized. The star‐block copolymers were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization (ATRP). First, hyperbranched PHEMA–OH with 18 hydroxyl end groups on average was used as an initiator for the ring‐opening polymerization of ε‐caprolactone to produce PHEMA–PCL star homopolymers [PHEMA = poly(2‐hydroxyethyl methacrylate); PCL = poly(caprolactone)]. Next, the hydroxyl end groups of PHEMA–PCL were converted to 2‐bromoesters, and this gave rise to macroinitiator PHEMA–PCL–Br for ATRP. Then, 2‐dimethylaminoethyl methacrylate or tert‐butyl methacrylate was polymerized from the macroinitiators, and this afforded the star‐block copolymers PHEMA–PCL–PDMA [PDMA = poly(2‐dimethylaminoethyl methacrylate)] and PHEMA–PCL–PtBMA [PtBMA = poly(tert‐butyl methacrylate)]. Characterization by gel permeation chromatography and nuclear magnetic resonance confirmed the expected molecular structure. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl methacrylate) blocks gave the star‐block copolymer PHEMA–PCL–PMAA [PMAA = poly(methacrylic acid)]. These amphiphilic star‐block copolymers could self‐assemble into spherical micelles, as characterized by dynamic light scattering and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6534–6544, 2005     

Y‐shaped diblock copolymer with epoxy‐based block of poly(glycidyl methacrylate): Synthesis,characterization, and its morphology study

A Y‐shaped diblock copolymer with a functional block poly(glycidyl methacrylate) was synthesized via the combination of enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). The synthetic procedure involved eROP of ε‐caprolactone (ε‐CL) in the presence of biocatalyst Novozyme 435 and initiator 1H,1H,2H,2H‐perfluoro‐1‐octaoxy, subsequently the resulting poly(ε‐caprolactone) (PCL) was converted to a macroinitiator by esterification of it with 2,2‐dichloro acetyl chloride, and finally the ATRP of glycidyl methacrylate (GMA) was conducted at 60 °C with CuCl/2,2′‐bipyridine as the catalyst system. By this process, we obtained copolymers with a controlled molecular weight and a low polydispersity. The structure and composition of the obtained polymers were characterized by H NMR, GPC, and IR. Linear first‐order kinetics, linearly increased molecular weight with conversion, and low polydispersities were observed for the ATRP of GMA. The thermal properties of the copolymer were characterized by differential scanning calorimetry. The self‐assembly behavior of the Y‐shaped block copolymer was also investigated in different solvents and at different concentrations. The aggregates of various morphologies (spheres, worm‐like patterns, nanowell patterns, and dendritic patterns) were observed. It was found that solvents remarkably influenced the morphologies of the films spin‐coated from the corresponding solutions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5509–5526, 2009     

Syntheses and micellar properties of well‐defined amphiphilic AB2 and A2B Y‐shaped miktoarm star copolymers of ε‐caprolactone and 2‐(dimethylamino)ethyl methacrylate

Well‐defined amphiphilic PCL‐b‐(PDMA)₂ and (PCL)₂‐b‐PDMA Y‐shaped miktoarm star copolymers and PCL‐b‐PDMA linear diblock copolymer were synthesized via a combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), where PCL is poly (ε‐caprolactone) and PDMA is poly(2‐(dimethylamino)ethyl methacrylate). All of these three types of copolymers have comparable PCL contents and overall molecular weights. The PCL block is hydrophobic while the PDMA block is hydrophilic, and they behave like polymeric surfactants and self‐assemble into PCL‐core micelles in aqueous media. The chain architectural effects on the micellization properties, including the aggregation number, size, polydispersity, and micelle densities of (PCL₂₉)₂‐b‐PDMA₄₅, PCL₆₁‐b‐(PDMA₂₄)₂, and PCL₅₆‐b‐PDMA₄₉ in dilute aqueous solution, were then explored by dynamic and static laser light scattering (LLS). The intensity–average hydrodynamic radius, 〈R_h〉, the aggregation number per micelle, N_agg, and the core radius, R_core, of the PCL‐core micelles all increased in the order PCL₆₁‐b‐(PDMA₂₄)₂ < (PCL₂₉)₂‐b‐PDMA₄₅ < PCL₅₆‐b‐PDMA₄₉. The surface area occupied per soluble PDMA block at the core/corona interface increased in the order PCL₆₁‐b‐(PDMA₂₄)₂ < PCL₅₆‐b‐PDMA₄₉ < (PCL₂₉)₂‐b‐PDMA₄₅. PCL₆₁‐b‐(PDMA₂₄)₂ micelles had the largest overall micelle density, possibly because of that the presence of two soluble PDMA arms at the junction point favors the bending of the core–corona interface and thus the formation of densely‐packed core‐shell nanostructures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1446–1462, 2007     

An insight into the schizophrenic self‐assembly of thermo and proton sensitive graphene oxide grafted block copolymer

In order to study the self‐assembly of block copolymer grafted from graphene oxide (GO) by the fluorescence of GO, poly(ε‐caprolactone) (PCL)‐block‐poly(dimethyl aminoethyl methacrylate) (PDMAEMA) is grafted from its surface using consecutive ring opening (ROP) and atom transfer radical polymerization (ATRP). GO‐g‐(PCL₁₃‐b‐PDMAEMA₁₁₇) (GPCLD) at pH 9.2 exhibits cloud point (T_c) at 32 °C. At pH 9.2 HRTEM images indicate schizophrenic morphology from vesicle at 26 °C to annular ring at 30 °C followed by giant size aggregation at 38 °C. But the reference block copolymer (PCL₁₄‐b‐PDMAEMA₁₂₆, PCLD), synthesized using benzyl alcohol as ROP initiator, exhibits only core–shell morphology whose size increases with rising temperature at pH 9.2. GPCLD solution exhibits good photoluminescence (PL) property arising from GO at pH 9.2 and PL‐intensity increases abruptly during phase transition. Both T_c and size of GPCLD assembly can be reversibly tuned by CO₂ and N₂ gas purging. ¹H NMR spectra exhibit a gradual shift of resonance peaks of the protons on CO₂ bubbling. Thus at pH 9.2 and at 38 °C the GPCLD acts as a good CO₂ sensor. Additionally, the GPCLD vesicle can load hydrophobic guest molecules which can be released by triggering with CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3878–3887     

Three‐arm star block copolymers of ε‐caprolactone and acrylic acid: Synthesis and micellization behavior

A series of well‐defined three‐arm star poly(ε‐caprolactone)‐b‐poly(acrylic acid) copolymers having different block lengths were synthesized via the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). First, three‐arm star poly(ε‐caprolactone) (PCL) (M_n = 2490–7830 g mol^?1; M_w/M_n = 1.19–1.24) were synthesized via ROP of ε‐caprolactone (ε‐CL) using tris(2‐hydroxyethyl)cynuric acid as three‐arm initiator and stannous octoate (Sn(Oct)₂) as a catalyst. Subsequently, the three‐arm macroinitiator transformed from such PCL in high conversion initiated ATRPs of tert‐butyl acrylate (^tBuA) to construct three‐arm star PCL‐b‐P^tBuA copolymers (M_n = 10,900–19,570 g mol^?1; M_w/M_n = 1.14–1.23). Finally, the three‐arm star PCL‐b‐PAA copolymer was obtained via the hydrolysis of the PtBuA segment in three‐arm star PCL‐b‐P^tBuA copolymers. The chain structures of all the polymers were characterized by gel permeation chromatography, proton nuclear magnetic resonance (¹H NMR), and Fourier transform infrared spectroscopy. The aggregates of three‐arm star PCL‐b‐PAA copolymer were studied by the determination of critical micelles concentration and transmission electron microscope. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, and fluorescence of pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer with pentaerythritol core

Novel and well‐defined pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymers were successfully achieved by combination of esterification, atom transfer radical polymerization (ATRP), divergent reaction, ring‐opening polymerization (ROP), and coupling reaction on the basis of pentaerythritol. The reaction of pentaerythritol with 2‐bromopropionyl bromide permitted ATRP of styrene (St) to form four‐arm star‐shaped polymer (PSt‐Br)₄. The molecular weights of these polymers could be adjusted by the variation of monomer conversion. Eight‐hydroxyl star‐shaped polymer (PSt‐(OH)₂)₄ was produced by the divergent reaction of (PSt‐Br)₄ with diethanolamine. (PSt‐(OH)₂)₄ was used as the initiator for ROP of ε‐caprolactone (CL) to produce eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL)₂)₄. The molecular weights of (PSt‐b‐(PCL)₂)₄ increased linearly with the increase of monomer. After the coupling reaction of hydroxyl‐terminated (PSt‐b‐(PCL)₂)₄ with 1‐pyrenebutyric acid, pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL‐pyrene)₂)₄ was obtained. The eight‐arm star‐shaped dendrimer‐like copolymers presented unique thermal properties and crystalline morphologies, which were different from those of linear poly(ε‐caprolactone) (PCL). Fluorescence analysis indicated that (PSt‐b‐(PCL‐pyrene)₂)₄ presented slightly stronger fluorescence intensity than 1‐pyrenebutyric acid when the pyrene concentration of them was the same. The obtained pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer has potential applications in biological fluorescent probe, photodynamic therapy, and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2788–2798, 2008     

Atom transfer radical homo‐ and block copolymerization of methyl 1‐bicyclobutanecarboxylate

A non‐olefinic monomer, methyl 1‐bicyclobutanecarboxylate (MBC), was successfully polymerized by the controlled/“living” atom transfer radical polymerization (ATRP) technique, resulting in a well‐defined homopolymer, PMBC, with only cyclobutane ring units in the polymer chain. An AB block copolymer poly(methyl 1‐bicyclobutanecarboxylate)‐b‐polystyrene (PMBC‐b‐PS), having an all‐ring unit segment, was also synthesized with narrow polydispersity and designed number‐average molecular weight in addition to precise end groups. The ¹H NMR spectra, glass‐transition temperature, and thermal stability of PMBC, PMBC‐b‐PS, and PS‐b‐PMBC were investigated. The experimental results showed that the cyclobutane rings in the two block polymers improved their thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1929–1936, 2002     

Synthesis and characterizations of well‐defined branched polymers with AB2 branches by combination of RAFT polymerization and ROP as well as ATRP

A well‐defined branched copolymer with PLLA‐b‐PS₂ branches was prepared by combination of reversible addition‐fragmentation transfer (RAFT) polymerization, ring‐opening polymerization (ROP), and atom transfer radical polymerization (ATRP). The RAFT copolymerization of methyl acrylate (MA) and hydroxyethyl acrylate (HEA) yielded poly(MA‐co‐HEA), which was used as macro initiator in the successive ROP polymerization of LLA. After divergent reaction of poly(MA‐co‐HEA)‐g‐PLLAOH with divergent agent, the macro initiator, poly(MA‐co‐HEA)‐g‐PLLABr₂ was formed in high conversion. The following ATRP of styrene (St) produced the target polymer, poly(MA‐co‐HEA)‐g‐(PLLA‐b‐PS₂). The structures, molecular weight, and molecular weight distribution of the intermediates and the target polymers obtained from every step were confirmed by their ¹H NMR and GPC measurements. DSC results show one T = 3 °C for the poly(MA‐co‐HEA), T = ?5 °C, T= 122 °C, and T = 157 °C for the branched copolymers (poly(MA‐co‐HEA)‐g‐PLLA), and T = 51 °C, T = 116 °C, and T = 162 °C for poly(MA‐co‐HEA)‐g‐(PLLA‐b‐PS₂). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 549–560, 2006     

Synthesis of poly(tetrahydrofuran)‐b‐polystyrene block copolymers from dual initiators for cationic ring‐opening polymerization and atom transfer radical polymerization

A dual initiator (4‐hydroxy‐butyl‐2‐bromoisobutyrate), that is, a molecule containing two functional groups capable of initiating two polymerizations occurring by different mechanisms, has been prepared. It has been used for the sequential two‐step synthesis of well‐defined block copolymers of polystyrene (PS) and poly(tetrahydrofuran) (PTHF) by atom transfer radical polymerization (ATRP) and cationic ring‐opening polymerization (CROP). This dual initiator contains a bromoisobutyrate group, which is an efficient initiator for the ATRP of styrene in combination with the Cu(0)/Cu(II)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalyst system. In this way, PS with hydroxyl groups (PS‐OH) is formed. The in situ reaction of the hydroxyl groups originating from the dual initiator with trifluoromethane sulfonic anhydride gives a triflate ester initiating group for the CROP of tetrahydrofuran (THF), leading to PTHF with a tertiary bromide end group (PTHF‐Br). PS‐OH and PTHF‐Br homopolymers have been applied as macroinitiators for the CROP of THF and the ATRP of styrene, respectively. PS‐OH, used as a macroinitiator, results in a mixture of the block copolymer and remaining macroinitiator. With PTHF‐Br as a macroinitiator for the ATRP of styrene, well‐defined PTHF‐b‐PS block copolymers can be prepared. The efficiency of PS‐OH or PTHF‐Br as a macroinitiator has been investigated with matrix‐assisted laser desorption/ionization time‐of‐flight spectroscopy, gel permeation chromatography, and NMR. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3206–3217, 2003     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007     

Block and star block copolymers by mechanism transformation. I. Synthesis of PTHF‐PSt‐PTHF by the transformation of ATRP into CROP

Polystyrene (PSt) with end‐terminal bromine (Br‐PSt‐Br) was synthesized by the atom transfer radical polymerization of styrene with the difunctional initiator 1,2‐bis(2′‐bromobutyryloxy)ethane in combination with CuBr and bipyridine. The Br‐PSt‐Br reacted with silver perchlorate at −78 °C, and the resulting macromolecular initiator was used to initiate the polymerization of tetrahydrofuran. Triblock poly(tetrahydrofuran)‐polystyrene‐poly(tetrahydrofuran) (PTHF‐PSt‐PTHF) diol was obtained after propagation at −15 °C. The conversion of the polymerization was measured by gas chromatography. The structures of the triblock copolymer PTHF‐PSt‐PTHF diol were characterized by ¹H NMR and gel permeation chromatography. The mechanism of cationic ring‐opening polymerization is discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 337–344, 2000     

Synthesis and characterizations of the four‐armed amphiphilic block copolymer S[poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate)]4

The polymers poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate] (PDMDMA) and four‐armed PDMDMA with well‐defined structures were prepared by the polymerization of (2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate (DMDMA) in the presence of an atom transfer radical polymerization (ATRP) initiator system. The successive hydrolyses of the polymers obtained produced the corresponding water‐soluble polymers poly(2,3‐dihydroxypropyl acrylate) (PDHPA) and four‐armed PDHPA. The controllable features for the ATRP of DMDMA were studied with kinetic measurements, gel permeation chromatography (GPC), and NMR data. With the macroinitiators PDMDMA–Br and four‐armed PDMDMA–Br in combination with CuBr and 2,2′‐bipyridine, the block polymerizations of methyl acrylate (MA) with PDMDMA were carried out to afford the AB diblock copolymer PDMDMA‐b‐MA and the four‐armed block copolymer S{poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate]‐block‐poly(methyl acrylate)}₄, respectively. The block copolymers were hydrolyzed in an acidic aqueous solution, and the amphiphilic diblock and four‐armed block copolymers poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate) were prepared successfully. The structures of these block copolymers were verified with NMR and GPC measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3062–3072, 2001     

Synthesis and characterization of double thermo‐responsive block copolymer consisting N‐isopropylacrylamide by atom transfer radical polymerization

In this thesis, we studied the convenient synthesis and characterizations of thermo‐responsive materials with double response. To achieve these, AB‐type diblock copolymers comprising of poly(N‐isopropylacrylamide) (NIPAAm) segment and poly(NIPAAm‐co‐(N‐(hydroxymethyl)acrylamide) (HMAAm)) one were designed. That was synthesized in one‐pot using an atom transfer radical polymerization (ATRP) technique. Poly(NIPAAm‐co‐HMAAm)s synthesized separately showed sensitive thermo‐response and the cloud point was completely tunable by the composition of HMAAm. As expected, the block copolymers exhibited double thermo‐responsive profiles in aqueous solution. The responsive behavior was discussed by precise trace by ¹H NMR and turbidity measurements. From these results, we could confirm almost independent dehydration of each segment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6142–6150, 2008     

Fluorinated star‐shaped block copolymers: Synthesis and optical properties

Tetrakis(4‐(1‐bromoethyl)phenyl)silane is synthesized and utilized to initiate the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) to generate bromo‐terminated four‐armed PMMA macroinitiators, which further initiate the ATRP of methylacryloyloxyl‐2‐hydroxypropyl perfluorooctanoate (FGOA) to create fluorinated star‐shaped block copolymers PMMA‐b‐poly(FGOA)s with fluorine content ranging from 0 to 31.7 wt %. The polymerizations are well controlled with the polydispersity indices <1.30. The polymers readily dissolve in common organic solvents and show good film‐formation. Compared with the nonfluorinated sample, the fluorinated films exhibit significantly increased water contact angles owing to the enrichment of fluorine on the surface. The enhanced hydrophobicity is advantageous for the optical stability when the devices work under a moist environment. Moreover, the films possess high thermo‐optic coefficients, tunable refractive indices, and extremely low birefringence coefficients because of the presence of bulky and rigid tetraphenylsilane core and star‐shaped topological structure, showing potential application in optical waveguide devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1969–1977     

Synthesis of i‐PP‐based functional block copolymer by a facile combination of styryl‐capped i‐PP and ATRP

This article demonstrates a facile and efficient method to combine olefin coordination polymerization with atom transfer radical polymerization (ATRP) for the synthesis of isotactic polypropylene (i‐PP)‐based functional diblock copolymers. The chemistry involves a styryl‐capped i‐PP precursor prepared through the controlled consecutive chain transfer reaction, first to 1,2‐bis(4‐vinylphenyl)ethane and then to hydrogen in propylene polymerization mediated by an isospecific metallocene catalyst. The i‐PP precursor can be quantitatively transformed into i‐PP terminated with a 1‐chloroethylbezene group (i‐PP‐t‐Cl) by a straightforward hydrochlorination process using hydrogen chloride. With the resultant i‐PP‐t‐Cl as a macroinitiator of ATRP, methyl methacrylate (MMA) polymerization was exemplified in the presence of CuBr/pentamethyldiethylenetriamine, preparing i‐PP‐b‐PMMA copolymers of different PMMA contents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

One‐pot synthesis of block copolymers by ring‐opening polymerization and ultraviolet light‐induced ATRP at ambient temperature

We successfully synthesized poly(l ‐lactide)‐b‐poly (methyl methacrylate) diblock copolymers at ambient temperature by combining ultraviolet light‐induced copper‐catalyzed ATRP and organo‐catalyzed ring‐opening polymerization (ROP) in one‐pot. The polymerization processes were carried out by three routes: one‐pot simultaneous ATRP and ROP, one‐pot sequential ATRP followed by ROP, and one‐pot sequential ROP followed by ATRP. The structure of the block copolymers is confirmed by nuclear magnetic resonance and gel permeation chromatography, which suggests that the polymerization method is facile and attractive for preparing block copolymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 699–704