A novel planar D‐A alternating copolymer with D‐A integrated structures exhibiting H‐aggregate behaviors for polymer solar cells

With the D‐A integrated structure concept, a new donor–acceptor (D‐A) copolymer poly{(N‐dodecyl‐carbazole[3,4‐c:5,6‐c]bis[1,2,5]thiadiazole‐alt‐4,8‐di(2‐ethylhexy‐loxyl)benzo[1,2‐b:4,5‐b′]dithiophene)} has been designed and synthesized using a novel architecture N‐dodecyl‐carbazole[3,4‐c:5,6‐c]bis[1,2,5]thiadiazole, and di(2‐ethylhexy‐loxyl)benzo[1,2‐b:4,5‐b′]dithiophene) as the basic building blocks. The copolymer has a low‐lying highest occupied molecular orbital energy level of ?5.41 eV and a broaden absorption matching well with the main solar photon flux. Note that an H‐aggregation beneficial for charge transportation and collection is formed in the macromolecules film, which implies that the planar D‐A integrated structure favors the strong intermolecular interaction to render molecules aggregated via face‐to‐face self‐assembly. The aggregation becomes larger scale after thermal annealing. Additionally, obvious intramolecular charge transfer and energy transfer have occurred in created D‐A integration. Without any treatment, the resulting polymer achieved a efficiency of 2.0% and relatively high open‐circuit voltage (V_oc) value of 0.77 V when blended with [6,6]‐phenyl‐C61‐butyric acid methyl ester in a typical bulk heterojunction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of naphtho[2,1‐b:3,4‐b′]dithiophene‐based polymers with extended π‐conjugation systems for use in bulk heterojunction polymer solar cells

Two novel polymeric semiconductor materials based on naphtho[2,1‐b:3,4‐b']dithiophene (NDT), PNDT‐TTT and PNDT‐TET , were designed and synthesized. These synthesized polymers were tested in bulk heterojunction solar cells as blends with the acceptor [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC₇₁BM). PNDT‐TTT contained tri‐thiophene units, and PNDT‐TET contained bi‐thiophene units coupled by ethylenic linkages. Comparison to the properties of PNDT‐T , which contained single thiophene units, these polymers exhibit red‐shifted absorption spectra as a result of the enhanced conjugation lengths. These effects resulted in high short circuit currents (J_SC) in the organic solar cells. The PNDT‐TET ‐ and PNDT‐TTT ‐based devices exhibited considerably better photovoltaic performances, with power conversion efficiencies of 3.5 and 3.3%, respectively, compared to the PNDT‐T ‐based device (1.3%). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4742–4751     

Effects of substituted side‐chain position on donor–acceptor conjugated copolymers

The optical properties and electrical properties of a series of low‐band‐gap conjugated copolymers, in which alkyl side chains were substituted at various positions, were investigated using donor–acceptor conjugated copolymers consisting of a cyclopentadithiophene derivative and dithienyl‐benzothiadiazole. With substituted side chains, the intrinsic properties of the copolymers were significantly altered by perturbations of the intramolecular charge transfer. The absorption of poly[2, 6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4, 7‐bis(4‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐ttOTBTOT ( P2 )], which assumed a tail–tail configuration, tended to blue shift relative to the absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4,7‐bis (thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐TBTT ( P1 )]. The absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3, 4‐b′]dithiophene)‐alt‐4,7‐bis(3‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐hhOTBTOT ( P3 )], which assumed a head–head configuration, was blue shifted relative to that of P2 . The electrical transport properties of field‐effect transistors were sensitive to the side chain position. The field‐effect mobility in P2 (μ₂ = 1.8 × 10^?3 cm²/V s) was slightly lower than that in P1 (μ₁ = 4.9 × 10^?3 cm²/V s). However, the mobility of P3 was very low (μ₃ = 3.8 × 10^?6 cm²/V s). Photoexcitation spectroscopy showed that the charge generation efficiency (shown in transient absorption spectra) and polaron pair mobility in P1 and P2 were higher than in P3 , yielding P1 and P2 device performances that were better than the performance of devices based on P3 . © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of cyclopentadithiophene‐based low bandgap copolymers containing electron‐deficient benzoselenadiazole derivatives for photovoltaic devices

We have synthesized two cyclopentadithiophene (CDT)‐based low bandgap copolymers, poly[(4,4‐bis(2‐ethyl‐hexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐(benzo[c][1,2,5]selenadiazole‐4,7‐diyl)] (PCBSe) and poly[(4,4‐bis(2‐ethyl‐hexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐(4,7‐dithiophen‐2‐yl‐benzo[c][1,2,5]selenadiazole‐5,5′‐diyl)] (PCT2BSe), for use in photovoltaic applications. Through the internal charge transfer interaction between the electron‐donating CDT unit and the electron‐accepting benzoselenadiazole, we realized exceedingly low bandgap polymers with bandgaps of 1.37–1.46 eV. The UV–vis absorption maxima of PCT2BSe were subjected to larger hypsochromic shifts than those of PCBSe, because of the distorted electron donor–acceptor (D–A) structures of the PCT2BSe backbone. These results were supported by the calculations of the D–A complex using the ab initio Hartree‐Fock method with a split‐valence 6‐31G* basis set. However, PCT2BSe exhibited a better molar absorption coefficient in the visible region, which can lead to more efficient absorption of sunlight. As a result, PCT2BSe blended with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) exhibited a better photovoltaic performance than PCBSe because of the larger spectral overlap integral with respect to the solar spectrum. Furthermore, when the polymers were blended with PC₇₁BM, PCT2BSe showed the best performance, with an open circuit voltage of 0.55 V, a short‐circuit current of 6.63 mA/cm², and a power conversion efficiency of 1.34% under air mass 1.5 global illumination conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1423–1432, 2010     

Synthesis and photovoltaic properties of two‐dimensional copolymers based on novel benzothiadiazole and quinoxaline acceptors with conjugated dithienylbenzothiadiazole pendants

Two novel acceptors of benzo[c][1,2,5]thiadiazole and quinoxaline with conjugated dithienylbenzothiadiazole pendants were first designed and synthesized for building efficient photovoltaic copolymers. Based on benzo[1,2‐b;3,4‐b′]dithiophene donors and the two acceptors, two new copolymers have been prepared by Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. UV–Visible absorption and cyclic voltammetry measurements indicated that the two copolymers possessed strong and broad absorption in the range of 300–700 nm, and deep‐lying energy levels of highest occupied molecular orbitals. The polymer photovoltaic devices based on benzo[c][1,2,5]thiadiazole‐based copolymer/phenyl‐C₇₁‐butyric acid methyl ester exhibited a power conversion efficiency of 2.42%, attributed to its relatively better light‐harvesting ability and active film morphology. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 668–677     

High‐performing random terpolymer‐based nonfullerene polymer solar cells fabricated using solvent additive‐free as‐cast blend films

Two new random terpolymers containing 4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDT) as a donating unit, methyl‐3‐thiophenecarboxylate (3MT) as a weak accepting unit, and the more electron‐deficient benzo[c][1,2,5]thiadiazole (BTz) or 5,5′‐bis(2‐ethylhexyl)‐4H,4′H‐1,1′‐bithieno[3,4‐c]pyrrole‐4,4′,6,6′(5H,5′H)‐tetraone (BiTPD) unit as a third monomer (respectively yielding 3MTB and 3MTT ) were synthesized in order to achieve improved physical and optoelectronic properties relative to the 3MT‐Th copolymer bearing only BDT and 3MT. The UV–vis absorption spectra and optical bandgap energies of these terpolymers were broader and smaller than those of the 3MT‐Th copolymer. In thin films, the terpolymers displayed the face‐on polymer chain orientation, indicating that the BTz or BiTPD unit in the terpolymer backbones did not affect the molecular arrangement on the substrate. In comparison with 3MT‐Th ‐based polymer solar cells (PSCs) as control devices, the PSCs employing blend films of these terpolymers as the donor and 2,2′‐[[6,6,12,12‐Tetrakis(4‐hexylphenyl)‐6,12‐dihydrodithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,8‐diyl]bis[methylidyne(3‐oxo‐1H‐indene‐2,1(3H)‐diylidene)]]bis[propanedinitrile] (ITIC) as the acceptor exhibited higher power conversion efficiencies (>8.0%) for the same device configuration. In addition, the 3MTB‐ and 3MTT‐ based PSC devices displayed excellent shelf‐life even after aging for over 1000 h. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1528–1535     

A Re‐Examination of the Reaction of 3,4‐Diamino[1,2,5]oxadiazole with Glyoxal

Reaction coordinate mapping was used to study the reaction of 3,4‐diamino[1,2,5]oxadiazole (3,4‐diaminofurazan) and 3,4‐diamino[1,2,5]thiadiazole with glyoxal. The thiadiazole was known to give a good yield of [1,2,5]thiadiazolo[3,4‐b]pyrazine, whereas the oxadiazole had not yielded, until now, [1,2,5]oxadiazolo[3,4‐b]pyrazine (or furazano[2,3‐b]pyrazine). The calculations suggested that the diols, 5,6‐dihydroxy‐4,5,6,7‐tetrahydro[1,2,5]oxadiazolo[3,4‐b]pyrazine and 5,6‐dihydroxy‐4,5,6,7‐tetrahydro[1,2,5]thiadiazolo[3,4‐b]pyrazine should be stable intermediates, and once formed, should provide a pathway to the target compounds via two dehydration steps, under forcing conditions. With this information in mind, the reactions of 3,4‐diamino[1,2,5]oxadiazole with glyoxal and pyruvic aldehyde were re‐examined. The reaction of 3,4‐diamino[1,2,5]oxadiazole with glyoxal and pyruvic aldehyde produced, under slightly basic conditions, a near quantitative yield of the expected initial products, 5,6‐dihydroxy‐4,5,6,7‐tetrahydro[1,2,5]oxadiazolo[3,4‐b]pyrazine and the 5‐methyl analog, respectively. The diols were easily isolated by lyophilizing the aqueous reaction mixture. The diols were pyrolized on silica gel at 160°C to give the desired [1,2,5]oxadiazolo[3,4‐b]pyrazine and the 5‐methyl analog. Both compounds were easily reduced to the corresponding 4,5,6,7‐tetrahydro‐derivative using sodium borohydride in THF/methanol. The [1,2,5]oxadiazolo[3,4‐b]pyrazine also displayed other interesting chemistry.     

Donor–acceptor semiconducting polymers for organic solar cells

This review describes the synthesis and photovoltaic performance of donor–acceptor (D–A) semiconducting polymers that have been reported during the last decade. 9,9‐Dialkyl‐2,7‐ fluorene, 2,7‐carbazole, cyclopenta[2,1‐b:3,4‐b′]dithiophene, dithieno[3,2‐b:2′,3′‐d]silole, dithieno[3,2‐b:2′,3′‐d]pyrrole, benzo[1,2‐b:4,5‐b′]dithiophene, benzo[1,2 b:4,5 b′]difuran building blocks, and their D–A copolymers are described in this review. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Detrimental Ni(0) transfer in Kumada catalyst transfer polycondensation of benzo[2,1‐b:3,4‐b']dithiophene

This article deals with the Kumada Catalyst Transfer Polycondensation (KCTP) of 4,7‐dioctylbenzo[2,1‐b:3,4‐b']dithiophene ( BDP‐Oct ) using Ni(II) catalyst or In/cat combination. A combination of MALDI MS, GPC, and ³¹P NMR spectroscopy is used to reveal the failure of the KCTP of this particular monomer. Intermolecular transfer reactions to monomer appeared to prevent the formation of polymer. This result is remarkable, since isomeric benzo[1,2‐b:4,5‐b']dithiophene polymerizes in a controlled way. The presence of a “non‐aromatic double bond” in annulated monomers is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1706–1712     

Heteroarene‐fused π‐conjugated main‐chain polymers containing 4,7‐bis(4‐octylthiophen‐2‐yl)benzo[c][1,2,5]thiadiazole or 2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole and their application to photovoltaic devices

Two conjugated main‐chain polymers consisting of heteroarene‐fused π‐conjuagted donor moiety alternating with 4,7‐bis(5‐bromo‐4‐octylthiophen‐2‐yl)benzo[c][1,2,5]thiadiazole (P1) or 2,5‐bis(5‐bromo‐4‐octylthiophen‐2‐yl) thiazolo[5,4‐d]thiazole (P2) units have been synthesized. They are intrinsically amorphous in nature and do not exhibit crystalline melting temperatures during thermal analysis. The effect of the fused rings on the thermal, optical, electrochemical, charge transport, and photovoltaic properties of these polymers has been investigated. The polymer (P1) containing 4,7‐bis(5‐bromo‐4‐octylthiophen‐2‐yl)benzo[c][1,2,5] thiadiazole has a broad absorption extending from 300 to 600 nm with optical bandgaps as low as 2.02 eV. The HOMO levels (5.42 to 5.29 eV) are more sensitive to the choice of acceptor. The polymers were employed to fabricate organic photovoltaic cells with methanofullerene [6,6]‐phenyl C71‐butyric acid methyl ester (PC₇₁BM). As a result, the polymer solar cell device containing P1 had the best preliminary results with an open‐circuit voltage of 0.61 V, a short‐circuit current density of 6.19 mA/cm², and a fill factor of 0.32, offering an overall power conversion efficiency of 1.21%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and Crystal Structure of Octahydro‐5H,12H‐4,11‐methano‐1H,7H‐bis[1,2,5]oxadiazolo[3,4‐d:3′,4′‐j][1,7,3,9]dioxadiazacyclododecine

The unusual 12‐membered ring compound, octahydro‐5H,12H‐4,11‐methano‐1H,7H‐bis[1,2,5]oxadiazolo[3,4‐d:3′,4′‐j][1,7,3,9]dioxadiazacyclododecine is obtained from the acid catalyzed reaction of 3‐amino‐4‐hydroxymethylfurazan with formaldehyde instead of the expected methylene‐bridged compound, 4,4′‐methylenebis[4,5‐dihydro‐7H‐[1,2,5]oxadiazolo[3,4‐d][1,3]oxazine]. The compound crystallizes in Tetragonal, P4₃2₁2, a = 6.4141(4) Å, b = 6.4141(4) Å, c = 26.525(3) Å, α = 90°, β = 90°, γ = 90°, V = 1091.27(16) ų, Z = 4, dcalc = 1.614 Mg/m³.     

Modulation of electronic properties of π‐conjugated copolymers derived from naphtho[1,2‐b:5,6‐b′]dithiophene donor unit: A structure‐property relationship study

A set of three donor‐acceptor conjugated (D‐A) copolymers were designed and synthesized via Stille cross‐coupling reactions with the aim of modulating the optical and electronic properties of a newly emerged naphtho[1,2‐b:5,6‐b′]dithiophene donor unit for polymer solar cell (PSCs) applications. The PTNDTT‐BT , PTNDTT‐BTz , and PTNDTT‐DPP polymers incorporated naphtho[1,2‐b:5,6‐b′]dithiophene ( NDT ) as the donor and 2,2′‐bithiazole ( BTz ), benzo[1,2,5]thiadiazole ( BT ), and pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione ( DPP ), as the acceptor units. A number of experimental techniques such as differential scanning calorimetry, thermogravimetry, UV–vis absorption spectroscopy, cyclic voltammetry, X‐ray diffraction, and atomic force microscopy were used to determine the thermal, optical, electrochemical, and morphological properties of the copolymers. By introducing acceptors of varying electron withdrawing strengths, the optical band gaps of these copolymers were effectively tuned between 1.58 and 1.9 eV and their HOMO and LUMO energy levels were varied between ?5.14 to ?5.26 eV and ?3.13 to ?3.5 eV, respectively. The spin‐coated polymer thin film exhibited p‐channel field‐effect transistor properties with hole mobilities of 2.73 × 10^?3 to 7.9 × 10^?5 cm² V^?1 s^?1. Initial bulk‐heterojunction PSCs fabricated using the copolymers as electron donor materials and [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) as the acceptor resulted in power conversion efficiencies in the range of 0.67–1.67%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2948–2958     

Synthesis and characterization of isoindigo‐based polymers using CH‐arylation polycondensation reactions for organic photovoltaics

A series of three new low bandgap donor–acceptor–donor–acceptor^/ (D–A–D–A^/) polymers have been successfully synthesized based on the combination of isoindigo as the electron‐deficient acceptor and 3,4‐ethylenedioxythiophene as the electron‐rich donor, followed by CH‐arylation with different acceptors (4,7‐dibromo[c][1,2,5]‐(oxa, thia, and/or selena)diazole ( 4a‐c )). These polymers were used as donor materials for photovoltaic applications. All of the polymers are highly stable and show good solubility in chlorinated solvents. The highest power conversion efficiency of 1.6% was achieved in the bulk heterojunction photovoltaic device that consisted of poly ((E)?6‐(7‐(benzo‐[c][1,2,5]‐thiadiazol‐4‐yl)?2,3‐dihydrothieno‐[3,4‐b][1,4]dioxin‐5‐yl)?6′‐(2,3‐dihydrothieno‐[3,4‐b][1,4]‐dioxin‐5‐yl)?1,1′‐bis‐(2‐octyldodecyl)‐[3,3′‐biindolinylidene]‐2,2′‐dione) as the donor and PC₆₁BM as the acceptor, with a short‐circuit current density (J_sc) of 8.10 mA/cm², an open circuit voltage (V_oc) of 0.56 V and a fill factor of 35%, which indicates that these polymers are promising donors for polymer solar cell applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2926–2933     

Syntheses of pyrimidine‐based polymers containing electron‐withdrawing substituent with high open circuit voltage and applications for polymer solar cells

Polymers using new electron‐deficient units, 2‐pyriminecarbonitrile and 2‐fluoropyrimidine, were synthesized and utilized for the photovoltaics. Donor‐acceptor (D‐A) types of conjugated polymers ( PBDTCN, PBDTTCN, PBDTF, and PBDTTF ) containing 4,8‐bis(2‐octyldodecyloxy)benzo[1,2‐b;3,4‐b′]dithiophene (BDT) or 4,8‐bis(5‐(2‐octyldodecyloxy)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDTT) as electron rich unit and 2‐pyriminecarbonitrile or 2‐fluoropyrimidine as electron deficient unit were synthesized. We designed pyrimidine derivatives in which strong electron‐withdrawing group (C?N or fluorine) was introduced to the C2 position for the generation of strong electron‐deficient property. By the combination with the electron‐rich unit, the pyrimidines will provide low band gap polymers with low highest occupied molecular orbital (HOMO) energy levels for higher open‐circuit voltages (V_OC). For the syntheses of the polymers, the electron‐rich and the electron‐deficient units were combined by Stille coupling reaction with Pd(0)‐catalyst. Absorption spectra of the thin films of PBDTTCN and PBDTTF with BDTT unit show shift to a longer wavelength region than PBDTCN and PBDTF with BDT unit. Four synthesized polymers provided low electrochemical bandgaps of 1.56 to 1.96 eV and deep HOMO energy levels between ?5.67 and ?5.14 eV. © 2015 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 771–784     

Lewis acid adducts of narrow band gap conjugated polymers

We report on the interaction of Lewis acids with narrow band gap conjugated copolymers containing donor and acceptor units. Examination of the widely used poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-(diyl-alt-benzo[2,1,3]thiadiazole)-4,7-diyl] (1) shows weaker binding with B(C(6)F(5))(3) when compared with a small molecule that contains a cyclopenta-[2,1-b:3,4-b']dithiophene (CDT) unit flanked by two benzo[2,1,3]thiadiazole (BT) fragments. Studies on model compounds representative of 1, together with a comparison between B(C(6)F(5))(3) and BBr(3), indicate that the propensity for Lewis acid coordination is decreased because of steric encumbrance surrounding the BT nitrogen sites. These observations led to the design of chromophores that incorporate an acceptor unit with a more basic nitrogen site, namely pyridal[2,1,3]thiadiazole (PT). That this strategy leads to a stronger B-N interaction was demonstrated through the examination of the reaction of B(C(6)F(5))(3) with two small molecules bis(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-4,7-pyridal[2,1,3]thiadiazole (8) and bis{2-thienyl-(4,4-bis(hexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)}-4,7-pyridal[2,1,3]thiadiazole (9) and two polymer systems (poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-([1,2,5]thiadiazolo[3,4-c]pyridine)-4,7-diyl] (10) and poly[(4,4-bis(2-ethylhexyl)cyclopenta-[2,1-b:3,4-b']dithiophene)-2,6-diyl-alt-(4',7'-bis(2-thienyl)-[1,2,5]thiadiazolo[3,4-c]pyridine)-5,5-diyl] (11). From a materials perspective, it is worth pointing out that through the binding of B(C(6)F(5))(3), new NIR-absorbing polymers can be generated with band gaps from 1.31 to 0.89 eV. A combination of studies involving ultraviolet photoemission spectroscopy and density functional theory shows that the narrowing of the band gap upon borane coordination to the pyridal nitrogen on PT is a result of lowering the energies of both the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the optically relevant fragments; however, the LUMO is decreased to a greater extent, thereby giving rise to the narrowing of the gap.     

New heterocyclic structures. [1,2,5]Thiadiazolo[3′,4′:4,5]pyrimido-[2,1-b][1,3]thiazine and thiazolo[3,2a][1,2,5]thiadiazolo[3,4-d]pyrimidine

Derivatives of two new molecular structures, namely, 7,8-dihydro-6H,10H-[1,2,5]thiadiazolo[3′,4′:4,5]pyrimido[2,1-b][1,3]thiazin-10-one and 6,7-dihydro-9H-thiazolo[3,2-a][1,2,5]thiadiazolo[3,4-d][pyrimidin-9-one, and derivatives of N-substituted sulfamic acid, namely, (8-amino-3,4-dihydro-2H,6H-pyrimido[2,1-b][1,3]thiazin-6-on-7-yl)sulfamic acid and (7-amino-2,3-dihydro-5H-thiazolo[3,2-a]pyrimidin-5-on-6-yl)sulfamic acid, were separated out as by-products in the reduction reaction of 8-amino-3,4-dihydro-7-nitroso-2H,6H-pyrimido[2,1- b][1,3]thiazin-6-one and 7-amino-2,3-dihydro-6-nitroso-5H-thiazolo[3,2-a]pyrimidin-5-one derivatives, respectively, with sodium hydrosulfite. A mechanism of reaction, which hypothesizes the action of sodium hydrosulfite in an asymmetic form, is proposed. The results of single-crystal X-ray investigation on 7,8-dihydro-6H,10H-[1,2,5]thiadiazolo[3′,4′:4,5]pyrimido[2,1-b][1,3]thiazin-10-one (R = 0.032 for 863 reflections) and (8-amino-3,4-dihydro-2H,6H-pyrimido[2,1-b]- [1,3]thiazin-6-on-7-yl)sulfamic acid, sodium salt (R = 0.028 for 3507 reflections) are reported.     

Synthesis and Photovoltaic Properties of Cyclopentadithiophene‐Based Low‐Bandgap Copolymers That Contain Electron‐Withdrawing Thiazole Derivatives

We have synthesized four types of cyclopentadithiophene (CDT)‐based low‐bandgap copolymers, poly[{4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl}‐alt‐(2,2′‐bithiazole‐5,5′‐diyl)] ( PehCDT‐BT ), poly[(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐(2,2′‐bithiazole‐5,5′‐diyl)] ( PocCDT‐BT ), poly[{4,4‐bis(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl}‐alt‐{2,5‐di(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole‐5,5′‐diyl}] ( PehCDT‐TZ ), and poly[(4,4‐dioctyl‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐{2,5‐di(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole‐5,5′‐diyl}] ( PocCDT‐TZ ), for use in photovoltaic applications. The intramolecular charge‐transfer interaction between the electron‐sufficient CDT unit and electron‐deficient bithiazole (BT) or thiazolothiazole (TZ) units in the polymeric backbone induced a low bandgap and broad absorption that covered 300 nm to 700–800 nm. The optical bandgap was measured to be around 1.9 eV for PehCDT‐BT and PocCDT‐BT , and around 1.8 eV for PehCDT‐TZ and PocCDT‐TZ . Gel permeation chromatography showed that number‐average molecular weights ranged from 8000 to 14 000 g mol^?1. Field‐effect mobility measurements showed hole mobility of 10^?6–10^?4 cm² V^?1 s^?1 for the copolymers. The film morphology of the bulk heterojunction mixtures with [6,6]phenyl‐C₆₁‐butyric acid methyl ester (PCBM) was also examined by atomic force microscopy before and after heat treatment. When the polymers were blended with PCBM, PehCDT‐TZ exhibited the best performance with an open circuit voltage of 0.69 V, short‐circuit current of 7.14 mA cm^?2, and power conversion efficiency of 2.23 % under air mass (AM) 1.5 global (1.5 G) illumination conditions (100 mW cm^?2).     

Ring‐ring interconversions. Part 3. On the effect of the substituents on the thiazole moiety in the ring‐opening/ring‐closing reactions of nitrosoimidazo[2,1‐b][1,3]thiazoles with hydrochloric acid

The reaction of 6‐(4‐chlorophenyl)‐5‐nitrosoimidazo[2,1‐b][1,3]thiazole 1b , 6‐(4‐chlorophenyl)‐2‐methyl‐5‐nitrosoimidazo[2,1‐b][1,3]thiazole 1c , 6‐(4‐chlorophenyl)‐2,3‐dimethyl‐5‐nitrosoimidazo‐[2,1‐b][1,3]thiazole 1d and 2‐(4‐chlorophenyl)‐3‐nitrosobenzo[d]imidazo[2,1‐b][1,3]thiazole 1e with hydrochloric acid has been carried out in order to investigate the effect of substituents on the thiazole ring in a recently reported ring‐ring interconversion reaction. In every case the corresponding [1,4]‐thiazino[3,4‐c][1,2,4]oxadiazol‐3‐ones 2b‐e have been obtained. In particular, the benzoderivative 1e furnished the 4‐(4‐chlorophenyl)‐4‐hydroxy‐4H‐benzo[5,6][1,4]thiazino[3,4‐c][1,2,4]oxadiazol‐1‐one 2e , containing a new tricyclic system with a quasi‐planar geometry whose pharmacological potentialities appear promising.     

[1,2,5]thiadiazolo[3,4‐g]quinoxaline acceptor‐based donor–acceptor–donor‐type polymers: Effect of strength and size of donors on the band gap

Electrochromic polymers based on [1,2,5]thiadiazolo[3,4‐g]quinoxaline acceptor and thiophene, 3,4‐ethylenedioxythiophene and 3,3‐didecyl‐3,4‐proylenedioxythiophene donors, namely poly(6,7‐diphenyl‐4,9‐di(thiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P1 ), poly(4‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)‐9‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐7‐yl)‐6,7‐diphenyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P2 ), and poly(4‐(3,3‐didecyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin‐6‐yl)‐9‐(3,3‐didecyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin‐8‐yl)‐6,7‐diphenyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P3 ), respectively, were electrochemically and/or chemically synthesized and characterized. Electrochemical and optical properties of the polymers were then investigated. The results, which were obtained electrochemically and optically, indicate that the polymers bearing the same acceptor and different donor units have a band gap range of 0.59–1.24 eV depending on the strength and size of the donor units and band gap determination method. A significant finding in this study was the phenomenon that when the acceptor is physically huge, the general rule that a weak donor would have a high band gap whereas a strong donor would have low band gap can be broken due to the torsional angles/steric hindrances involved with physically large donor molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3483–3493     

Low‐bandgap quinoxaline‐based D–A‐type copolymers: Synthesis,characterization, and photovoltaic properties

Three classes of quinoxaline (Qx)‐based donor–acceptor (D–A)‐type copolymers, poly[thiophene‐2,5‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diyl] P(T‐Qx), poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐2,3‐bis(4‐(octyloxy)phenyl‐quinoxaline‐5,8‐diy} P(BDT‐Qx), and poly{4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(5′,8′‐di‐2‐thienyl‐2,3‐bis(4‐octyloxyl)phenyl)‐quinoxaline‐5,5‐diyl} P(BDT‐DTQx), were synthesized via a Stille coupling reaction. The Qx unit was functionalized at the 2‐ and 3‐positions with 4‐(octyloxy)phenyl to provide good solubility and to reduce the steric hindrance. The absorption spectra of the Qx‐containing copolymers could be tuned by incorporating three different electron‐donating moieties. Among these, P(T‐Qx) acted as an electron donor and yielded a high‐performance solar cell by assuming a rigid planar structure, confirmed by differential scanning calorimetry, UV–vis spectrophotometer, and density functional theory study. In contrast, the P(BDT‐Qx)‐based solar cell displayed a lower power conversion efficiency (PCE) with a large torsional angle (34.7°) between the BDT and Qx units. The BDT unit in the P(BDT‐DTQx) backbone acted as a linker and interfered with the formation of charge complexes or quinoidal electronic conformations in a polymer chain. The PCEs of the polymer solar cells based on these copolymers, in combination with [6,6]‐phenyl C70 butyric acid methyl ester (PC₇₁BM), were 3.3% [P(T‐Qx)], 1.9% [P(BDT‐Qx)], and 2.3% [P(BDT‐DTQx)], respectively, under AM 1.5G illumination (100 mW cm^?2). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013