Air‐stable copper derivatives as efficient catalysts for controlled lactide polymerization: Facile synthesis and characterization of well‐defined benzotriazole phenoxide copper complexes

Air‐stable copper catalysts supported by bis‐ BTP ligands ( BTP = N,O‐bidentate benzotriazole phenoxide) were synthesized and structurally characterized. The reactions of Cu(OAc)₂·H₂O with 2.0 molar equivalents of sterically bulky 2‐(2H‐benzotriazol‐2‐yl)‐4,6‐bis(1‐methyl‐1‐phenylethyl)phenol ( ^CMe2PhBTP ‐H) and 2‐(2H‐benzotriazol‐2‐yl)‐4,6‐di‐tert‐butylphenol ( ^t‐BuBTP ‐H) in refluxing ethanol solution afforded monomeric copper complexes [(^CMe2PhBTP)₂Cu] ( 1 ) and [(^t‐BuBTP)₂Cu] ( 2 ), respectively. The four‐coordinated copper analogue [(^TMClBTP)₂Cu] (3 ) resulted from treatment of 2‐tert‐butyl‐6‐(5‐chloro‐2H‐benzotriazol‐2‐yl)‐4‐methylphenol ( ^TMClBTP ‐H) as the ligand under the same synthetic method with ligand to metal precursor ratio of 2:1, but treatment of complex 3 in acetone gave five‐coordinated monomeric complex [(^TMClBTP)₂Cu(Me₂CO)] (4 ). X‐ray diffraction of single crystals indicates that Cu complex 4 assumes a distorted square pyramidal geometry, penta‐coordinated by two BTP ligands, and one Me₂CO molecule. Catalysis for lactide (LA) polymerization of BTP ‐containing Cu complexes in the presence of various alcohol initiators was investigated. Complex 3 initiated by 9‐anthracenemethanol catalyzes the ring‐opening polymerization effectively not only in a “living” fashion but also in an “immortal” manner, yielding polymers with the predictable molecular weights and narrow molecular weight distributions. Initiations from multifunctional alcohols were able to produce PLLAs with two‐arm linear and three‐arm star‐shaped molecular architectures. The controlled character of Cu complex 3 also enabled us to synthesize the PEG‐b‐PLLA copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3840–3849     

Phosphido‐diphosphine pincer aluminum complexes as catalysts for ring opening polymerization of cyclic esters

New aluminum alkyl complexes, supported by o‐phenylene‐derived phosphido diphosphine pro‐ligands [Ph‐PPP]‐H and [ⁱPr‐PPP]‐H ([Ph‐PPP]‐H = bis(2‐diphenylphosphinophenyl)phosphine; [ⁱPr‐PPP]‐H = bis(2‐diisopropylphosphinophenyl)phosphine) are reported. Compounds [Ph‐PPP]AlMe₂ ( 1 ), [ⁱPr‐PPP]AlMe₂ ( 2 ), and [Ph‐PPP]AlⁱBu₂ ( 3 ) have been synthesized by reaction of the pro‐ligand with the appropriate trialkyl aluminum precursor and have been characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The solution NMR data and theoretical calculations suggest for all complexes trigonal bipyramidal structures with C_2v symmetry in which the phosphido diphosphine ligand acts as a κ³ coordinated ligand. All complexes promote the ring‐opening polymerization of ε‐caprolactone, L‐ and rac‐lactide. Polyesters with controlled molecular parameters (M_n, end groups) and low polydispersities are obtained. Upon addition of isopropanol, efficient binary catalytic systems for the immortal ring‐opening polymerization of the cyclic esters are produced. Preliminary investigations show the ability of these complexes to promote copolymerization of l ‐lactide and ?‐caprolactone to achieve copolymers whose microstructures are depending on the structure of the catalyst. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 49–60     

Titanium complexes bearing amine bis(phenolate) ligands: Synthesis,structure and catalysis in ring‐opening polymerization of lactide

Monomeric bis(isopropoxy) titanium complexes LTi(Oⁱ Pr)₂ (L =  ─ OC₆H₂–4‐R¹–6‐R²–2‐CH₂N[(CH₂)₂N(R³)₂]CH₂–4‐R⁴–6‐R⁵‐C₆H₂O ─ , R¹ = R² = ^t Bu, R³ = Et, R⁴ = R⁵ = Cl, (L¹)Ti(Oⁱ Pr)₂; R¹ = R² = Me, R³ = Et, R⁴ = R⁵ = Me, (L²)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Et, R⁴ = OMe, R⁵ = ^t Bu, (L³)Ti(Oⁱ Pr)₂; R¹ = R⁴ = OMe, R³ = Et, R² = R⁵ = ^t Bu, (L⁴)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Me, R⁴ = OMe, R⁵ = ^t Bu, (L⁵)Ti(Oⁱ Pr)₂) supported by amine bis(phenolate) ligands were synthesized and characterized using NMR spectroscopy and elemental analysis. The solid‐state structure of (L³)Ti(Oⁱ Pr)₂ was determined using single‐crystal X‐ray diffraction. (L^1–5)Ti(Oⁱ Pr)₂ were all found to initiate the ring‐opening polymerization of l ‐lactide and rac ‐lactide in a controlled manner at 110–160°C. As shown by kinetic studies, (L¹)Ti(Oⁱ Pr)₂ polymerized l ‐lactide faster than did (L^2–5)Ti(Oⁱ Pr)₂. In addition, good number‐average molecular weight and narrow polydispersity index (1.00–1.71) of polymers were also obtained. The microstructure of the polymers and a possible mechanism of coordination–insertion of polymerization were evidenced by MALDI‐TOF and ¹H NMR spectra of the polylactides.     

Aluminum,calcium and zinc complexes supported by potentially tridentate iminophenolate ligands: synthesis and use in the ring‐opening polymerization of lactide

The coordination chemistry of the potentially tridentate phenoxyethyl‐ and benzylaminoethyl‐iminophenol pro‐ligands {ONO}H and {ONN}H on to calcium, zinc and aluminum centers has been studied. {ONO}Ca(N(SiMe₃)₂)(THF) (1) was prepared by a one‐pot salt metathesis procedure but the analogous reaction with {ONN}H led to intractable mixtures. Reaction of {ONO}H and {ONN}H with ZnEt₂ (0.5 or 1 equiv.) systematically led to isolation of the corresponding homoleptic complexes {ONO}₂Zn (2) and {ONN}₂Zn (3). The dimethylaluminum complexes {ONO}AlMe₂ (4) and {ONN}AlMe₂ (5) were readily prepared by treatment of AlMe₃ with 1 equiv. of the corresponding pro‐ligands. Compounds 2 and 4 both feature monomeric structures in the solid state, with chelating iminophenolate ligands and free‐hanging phenoxyethyl arms. The amido complex 1 was shown to be a moderately active initiator for the controlled ring‐opening polymerization (ROP) of racemic lactide at room temperature, yielding polylactides with high initiation efficiencies, relatively narrow polydispersities and a slight heterotactic bias. Immortal polymerizations were achieved by combining excess isopropanol to 1, offering up to 50 macromolecules per metal center, with well‐controlled molecular features. The dimethylaluminum compounds 4 and 5 initiated the controlled ROP of lactide in the presence of 1 equiv. of benzyl alcohol as a co‐initiator but required higher temperatures. Copyright © 2012 John Wiley & Sons, Ltd.     

Ring‐opening polymerization of cyclic esters by pincer complexes derived from alkaline earth metals

We report the synthesis and characterization of new Ca(II) and Mg(II) complexes of the type [Ph―PPP]MR (M = Ca, R = N(SiMe₃)₂ ( 1 ); M = Mg, R = ⁿBu ( 2 )) where Ph―PPP^? is a tridentate monoanionic ligand (Ph―PPP―H = bis(2‐diphenylphosphinophenyl)phosphine). Reaction of the opportune metal precursor (Ca[N(SiMe₃)₂]₂.THF₂ or MgⁿBu₂) with 1 equiv. of the pro‐ligand Ph―PPP_―H produces the corresponding calcium amido ( 1 ) or magnesium butyl ( 2 ) complex in high yield. Solution NMR studies show monomeric and kinetically stable structures for both species. The obtained complexes efficiently mediate the ring‐opening polymerization of ?‐caprolactone showing a turnover frequency of 40 000 h^?1. In the presence of a hexogen alcohol, up to 2000 equiv. of monomer are converted by using a low loading of catalyst (5 µmol). Kinetic studies show a first‐order reaction in monomer concentration. Copyright © 2014 John Wiley & Sons, Ltd.     

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxy complexes

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxides {1,4‐dithiabutanediylbis(4,6‐di‐tert‐butylphenolate)}(isopropoxy)indium ( 1 ) and {1,4‐dithiabutanediylbis(4,6‐di(2‐phenyl‐2‐propyl)phenolate)}(isopropoxy)indium ( 2 ) is found to follow first‐order kinetics for monomer conversion. Activation parameters ΔH^? and ΔS^? suggest an ordered transition state. Initiators 1 and 2 polymerize meso‐lactide faster than rac‐lactide. In general, compound 2 with the more bulky cumyl ortho‐substituents in the phenolate moiety shows higher polymerization activity than 1 with tert‐butyl substituents. meso‐Lactide is polymerized to syndiotactic poly(meso‐lactides) in THF, while polymerization of rac‐lactide in THF gives atactic poly(rac‐lactides) with solvent‐dependent preferences for heterotactic (THF) or isotactic (CH₂Cl₂) sequences. Indium bis(phenolate) compound rac‐(1,2‐cyclohexanedithio‐2,2′‐bis{4,6‐di(2‐phenyl‐2‐propyl)phenolato}(isopropoxy)indium ( 3 ) polymerizes meso‐lactide to give syndiotactic poly(meso‐lactide) with narrow molecular weight distributions and rac‐lactide in THF to give heterotactically enriched poly(rac‐lactides). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4983–4991     

Tridentate anilido‐aldimine magnesium and zinc complexes as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and L‐lactide

A novel tridentate anilido‐aldimine ligand, [o‐C₆H₄(NHAr)? HC?NCH₂CH₂NMe₂] (Ar = 2,6‐ⁱPr₂C₆H₃, L ‐H, 1 ), has been prepared by the condensation of N, N‐dimethylethylenediamine with one molar equivalent of 2‐fluoro‐benzaldehyde in hexane, followed by the addition of the lithium salt of diisopropylaniline in THF. Magnesium (Mg) and zinc (Zn) complexes supported by the tridentate anilido‐aldimine ligand have been synthesized and structurally characterized. Reaction of L ‐H ( 1 ) with an equivalent amount of MgⁿBu₂ or ZnEt₂ produces the monomeric complex [ L MgⁿBu] ( 2 ) or [ L ZnEt] ( 3 ), respectively. Experimental results show that complexes 2 and 3 are efficient catalysts for ring‐opening polymerization of ε‐caprolactone (CL) and L ‐lactide (LA) in the presence of benzyl alcohol and catalyze the polymerization of ε‐CL and L ‐LA in a controlled fashion yielding polymers with a narrow polydispersity index. In both polymerizations, the activity of Mg complex 2 is higher than that of Zn complex 3 , which is probably due to the higher Lewis acidity and better oxophilic nature of Mg²⁺ metal. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4927–4936, 2009     

Well‐controlled ring‐opening polymerization of cyclic esters catalyzed by aluminum amido complexes: Kinetics and mechanism

A series of aluminum dimethyl complexes 1 – 6 bearing N‐[2‐(pyrrolidinyl)benzyl]anilido ligands were synthesized and well characterized. The molecular structure of complex 1 determined by an X‐ray diffraction study indicates the bidentate chelating mode of the pyrrolidinyl‐anilido ligand. In the absence of a coinitiator, these complexes exhibited excellent control toward the polymerizations of ε‐caprolactone and rac‐lactide, affording polyesters with quite narrow molecular weight distributions (M_w/M_n = 1.04–1.26). The end group analysis of ε?CL oligomer via ¹H NMR and ESI‐TOF MS methods gave strong support to the hypothesis that the polymerization catalyzed by these aluminum complexes proceeds via a coordination‐insertion mechanism involving a unique Al? N (amido) bond initiation. Via ¹H NMR scale oligomerization studies, it is suggested that the insertion of the first lactide monomer into Al? N bond of the complex is much easier than the insertion of lactide monomer into the newly formed Al? O (lactate) bond and might also be easier than the insertion of the first ε?CL monomer into Al? N bond. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3096–3106     

Strontium‐based initiator system for ring‐opening polymerization of cyclic esters

An amino isopropoxyl strontium (Sr‐PO) initiator, which was prepared by the reaction of propylene oxide with liquid strontium ammoniate solution, was used to carry out the ring‐opening polymerization (ROP) of cyclic esters to obtain aliphatic polyesters, such as poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). The Sr‐PO initiator demonstrated an effective initiating activity for the ROP of ε‐caprolactone (ε‐CL) and L‐lactide (LLA) under mild conditions and adjusted the molecular weight by the ratio of monomer to Sr‐PO initiator. Block copolymer PCL‐b‐PLLA was prepared by sequential polymerization of ε‐CL and LLA, which was demonstrated by ¹H NMR, ¹³C NMR, and gel permeation chromatography. The chemical structure of Sr‐PO initiator was confirmed by elemental analysis of Sr and N, ¹H NMR analysis of the end groups in ε‐CL oligomer, and Fourier transform infrared (FTIR) spectroscopy. The end groups of PCL were hydroxyl and isopropoxycarbonyl, and FTIR spectroscopy showed the coordination between Sr‐PO initiator and model monomer γ‐butyrolactone. These experimental facts indicated that the ROP of cyclic esters followed a coordination‐insertion mechanism, and cyclic esters exclusively inserted into the Sr–O bond. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1934–1941, 2003     

N,O‐chelate aluminum and zinc complexes: synthesis and catalysis in the ring‐opening polymerization of ε‐caprolactone

Reaction between 2‐(1H‐pyrrol‐1‐yl)benzenamine and 2‐hydroxybenzaldehyde or 3,5‐di‐tert‐butyl‐2‐hydroxybenzaldehyde afforded 2‐(4,5‐dihydropyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL¹NH, 1a) or 2,4‐di‐tert‐butyl‐6‐(4,5‐dihydropyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL²NH, 1b). Both 1a and 1b can be converted to 2‐(H‐pyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL³N, 2a) and 2,4‐di‐tert‐butyl‐6‐(H‐pyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL⁴N, 2b), respectively, by heating 1a and 1b in toluene. Treatment of 1b with an equivalent of AlEt₃ afforded [Al(Et₂)(OL²NH)] (3). Reaction of 1b with two equivalents of AlR₃ (R = Me, Et) gave dinuclear aluminum complexes [(AlR₂)₂(OL²N)] (R = Me, 4a; R = Et, 4b). Refluxing the toluene solution of 4a and 4b, respectively, generated [Al(R₂)(OL⁴N)] (R = Me, 5a; R = Et, 5b). Complexes 5a and 5b were also obtained either by refluxing a mixture of 1b and two equivalents of AlR₃ (R = Me, Et) in toluene or by treatment of 2b with an equivalent of AlR₃ (R = Me, Et). Reaction of 2a with an equivalent of AlMe₃ afforded [Al(Me₂)(OL³N)] (5c). Treatment of 1b with an equivalent of ZnEt₂ at room temperature gave [Zn(Et)(OL²NH)] (6), while reaction of 1b with 0.5 equivalent of ZnEt₂ at 40 °C afforded [Zn(OL²NH)₂] (7). Reaction of 1b with two equivalents of ZnEt₂ from room temperature to 60 °C yielded [Zn(Et)(OL⁴N)] (8). Compound 8 was also obtained either by reaction between 6 and an equivalent of ZnEt₂ from room temperature to 60 °C or by treatment of 2b with an equivalent of ZnEt₂ at room temperature. Reaction of 2b with 0.5 equivalent of ZnEt₂ at room temperature gave [Zn(OL⁴N)₂] (9), which was also formed by heating the toluene solution of 6. All novel compounds were characterized by NMR spectroscopy and elemental analyses. The structures of complexes 3, 5c and 6 were additionally characterized by single‐crystal X‐ray diffraction techniques. The catalysis of complexes 3, 4a, 5a–c, 6 and 8 toward the ring‐opening polymerization of ε‐caprolactone was evaluated. Copyright © 2008 John Wiley & Sons, Ltd.     

Anionic ring‐opening polymerization of propylene oxide in the presence of phosphonium catalysts

Anionic ring‐opening polymerization of propylene oxide in the presence of potassium alcoholate initiator was accelerated by addition of the bulky phosphonium salt tetrakis[cyclohexyl(methyl)amino]phosphonium‐tetrafluoroborate. Dipropylene glycol (DPG) was partially deprotonated (5%) and used as an initiator for the polymerization performed at 100 °C at normal pressure. The delocalization of the positive charge over five atoms promoted the formation of a separated ion pair, thus enhancing nucleophilicity and reactivity. Compared with those of polyaminophosphazenes and tetrabutylphosphonium cation, the average propagation rates increased in the order of Bu₄P⁺, K⁺, P, P, and ^tBuP₄H⁺. DP_n for the polymers was in the range of 20–64. Characterization of poly(propylene oxide)s by means of ¹H NMR, size exclusion chromatography (SEC), and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) showed low polydispersities (M_w/M_n) without any byproducts or impurities. The M_w/M_n obtained was 1.03–1.09 (MALDI‐TOF‐MS) and 1.11–1.15 (SEC), respectively. Values calculated from titration of the hydroxyl groups showed good agreement. Determination of the total degree of unsaturation in the range of 13–60 mmol/kg indicated larger amounts with increasing polymerization rates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 864–873, 2002; DOI 10.1002/pola.10163     

Solvent‐free ring‐opening polymerization of cyclohexene oxide catalyzed by palladium chloride

In this study, we have for the first time demonstrated that palladium chloride (PdCl₂) is an efficient catalyst for ring‐opening polymerization of cyclohexene oxide in a solvent‐free condition. The polymerization product was in atactic structure, and reaction conditions, such as reaction temperature, time, and catalyst amount, showed effects on polymerization conversion yield, turnover number, and number‐average molecular weight of the resulting poly(cyclohexene oxide). PdCl₂ catalysis follows a cationic ring‐opening mechanism. The polymerization result is highly determined by the chemical structure of the monomers.     

Ring‐opening polymerization of cyclic esters promoted by phosphido‐diphosphine pincer group 3 complexes

Phosphido‐diphosphine Group 3 metal complexes 1–4 [(o‐C₆H₄PR₂)₂P‐M(CH₂SiMe₃)₂; R = Ph, 1 : M = Y, 2 : M = Sc; R = iPr, 3 : M = Y, 4 : M = Sc] are very efficient catalysts for the ring‐opening polymerization (ROP) of cyclic esters such as ε‐caprolactone (ε‐CL), L ‐lactide, and δ‐valerolactone under mild polymerization conditions. In the ROP of ε‐CL, complexes 1–4 promote quantitative conversion of high amount of monomer (up to 3000 equiv) with very high turnover frequencies (TOF) (～4 × 10⁴ mol_CL/mol_I h) showing a catalytic activity among the highest reported in the literature. The immortal and living ROP of ε‐CL and L ‐lactide is feasible by combining complexes 1–4 with 5 equiv of 2‐propanol. Polymers with controlled molecular parameters (M_n, end groups) and low polydispersities (M_w/M_n = 1.05–1.09) are formed as a result of fast alkoxide/alcohol exchange. In the ROP of δ‐valerolactone, complexes 1–4 showed the same activity observed for lactide (L ‐ and D ,L ‐lactide) producing high molecular weight polymers with narrow distribution of molar masses. Complexes 1–4 also promote the ROP of rac‐β butyrolactone affording atactic low molecular weight poly(hydroxybutyrate) bearing unsaturated end groups probably generated by elimination reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hyperbranched aliphatic polyether esters by ring‐opening polymerization of epoxidized 2‐hydroxyethyl methacrylate

A series of biocompatible and degradable hyperbranched polyether esters, poly(2‐hydroxyethyl 2‐methyloxirane‐2‐carboxylate) (pHEMOC) with controlled molecular weight (MW) and polydispersity (PD), have been synthesized via oxyanionic ring‐opening polymerization of HEMOC that was prepared by the epoxidation of 2‐hydroxyethyl methacrylate. pHEMOCs of their MWs ranging from about 500 to 20,000 with their PD values less than 1.5 are obtained simply by controlling 1,1,1‐tris‐hydroxymethylpropane initiator to HEMOC ratio. The pHEMOCs comprised of ether and ester backbones and multiple hydroxyl groups on the core and periphery results in materials that exhibit good degradability and low cytotoxicity, enabling them to be an ideal candidate material for biomedical applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1643–1651     

Efficient zinc initiators supported by NNO‐tridentate ketiminate ligands for cyclic esters polymerization

A series of zinc benzylalkoxide complexes, [LⁿZn(μ‐OBn)]₂ (L = L ¹ H – L ⁵ H ), supported by NNO‐tridentate ketiminate ligands with various electron withdrawing‐donating subsituents have been synthesized and characterized. X‐ray crystal structural studies revealed that complexes 2b and 4b are dinuclear bridging through the benzylalkoxy oxygen atoms with penta‐coordinated metal centers. All the metal complexes have acted as efficient initiators for the ring‐opening polymerization of L ‐lactide (within 12 min, 0 °C). Remarkably, a molecular weight of PLLA up to 580,000 can be achieved using [(L⁵Zn(μ‐OBn)]₂ ( 5b ) as an initiator. The kinetic studies for the polymerization of L ‐lactide with complex 3b at ?10 °C corresponded to first‐order reactions in the monomer. The ring‐opening polymerization (ROP) of ε‐caprolactone, ε‐decalactone, β‐butyrolactone and their copolymer with complex 3b was investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Facile synthesis of AB2‐type miktoarm star polymers through the combination of atom transfer radical polymerization and ring‐opening polymerization

A novel miktofunctional initiator ( 1 ), 2‐hydroxyethyl 3‐[(2‐bromopropanoyl)oxy]‐2‐{[(2‐bromopropanoyl)oxy]methyl}‐2‐methyl‐propanoate, possessing one initiating site for ring‐opening polymerization (ROP) and two initiating sites for atom transfer radical polymerization (ATRP), was synthesized in a three‐step reaction sequence. This initiator was first used in the ROP of ?‐caprolactone, and this led to a corresponding polymer with secondary bromide end groups. The obtained poly(?‐caprolactone) (PCL) was then used as a macroinitiator for the ATRP of tert‐butyl acrylate or methyl methacrylate, and this resulted in AB₂‐type PCL–[poly(tert‐butyl acrylate)]₂ or PCL–[poly(methyl methacrylate)]₂ miktoarm star polymers with controlled molecular weights and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.23) via the ROP–ATRP sequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2313–2320, 2004     

Anionic ring‐opening polymerization of a five‐membered cyclic urethane derived from d‐glucosamine

The anionic ring‐opening polymerization of a five‐membered cyclic urethane, 2‐amino‐4,6‐O‐benzylidene‐2‐N,3‐O‐carbonyl‐2‐deoxy‐α,d ‐glucopyranoside (MBUG), which was prepared from naturally abundant d ‐glucosamine, was examined. Potassium tert‐butoxide (t‐BuOK) was the most effective initiator among the evaluated bases and produced polyurethane with the Mn of 7800 without any elimination of CO₂. The equimolar reaction of MBUG and t‐BuOK in the presence of CH₃I produced N‐methylated MBUG and suggested that the initiation reaction involves proton abstraction from the NH group. This N‐methylated compound did not undergo the polymerization. Therefore, the mechanism of propagation in the ROP of MBUG should involve the proton abstraction and nucleophilic substitution of the resulting amide anion. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2491–2497     

Anionic ring‐opening polymerization of a five‐membered cyclic carbonate having a glucopyranoside structure

Anionic ring‐opening polymerizations of methyl 4,6‐O‐benzylidene‐2,3‐O‐carbonyl‐α‐D ‐glucopyranoside (MBCG) were investigated using various anionic polymerization initiators. Polymerizations of the cyclic carbonate readily proceeded by using highly active initiators such as n‐butyllithium, lithium tert‐butoxide, sodium tert‐butoxide, potassium tert‐butoxide, and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene, whereas it did not proceed by using N,N‐dimethyl‐4‐aminopyridine and pyridine as initiators. In a polymerization of MBCG (1.0 M), 99% of MBCG was converted within 30 s to give the corresponding polymer with number‐averaged molecular weight (M_n) of 16,000. However, the M_n of the polymer decreased to 7500 when the polymerization time was prolonged to 24 h. It is because a backbiting reaction might occur under the polymerization conditions. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cationic ring‐opening polymerization of six‐membered cyclic carbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the ester‐substituted cyclic carbonates 5‐methyl‐5‐benzoyloxymethyl‐1,3‐dioxan‐2‐one ( CC1 ) and 4‐benzoyloxymethyl‐1,3‐dioxan‐2‐one ( CC4 ). The polymerization was carried out with trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or methyl iodide as the initiator. The reactivity of CC1 and CC4 was higher than that of 5,5‐dimethyl‐1,3‐dioxan‐2‐one, which had no ester moiety. These results suggest that this ring‐opening polymerization was accelerated by the intramolecular ester group. CC1 showed a higher polymerizability than CC4 , affording a polymer with a higher molecular weight. Additionally, using methyl iodide as the initiator was effective for increasing the molecular weight of the obtained polycarbonate and decreasing decarboxylation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1305–1317, 2001     

Enzymatic ring‐opening polymerization of ε‐caprolactone by Yarrowia lipolytica lipase in ionic liquids

Yarrowia lipolytica (YLL), Candida rugosa (CRL), and porcine pancreatic lipase (PPL) were employed successfully as catalysts in the enzymatic ring‐opening polymerization (ROP) of ε‐caprolactone in the presence of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF₄]), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIM][BF₄]), 1‐butylpyridinium tetrafluoroborate ([BuPy][BF₄]), 1‐butylpyridinium trifluoroacetate ([BuPy][CF₃COO]), 1‐ethyl‐3‐methylimidazolium nitrate ([EMIM][NO₃]) ionic liquids. Poly(ε‐caprolactone)s (PCLs) with molecular weights (M_n) in the range of 300–9000 Da were obtained. ¹H‐ and ¹³C‐NMR analyses on PCLs formed by YLL, CRL, and PPL showed asymmetric telechelic α‐hydroxy‐ω‐carboxylic acid end groups. Differences between CP‐MAS and MAS spectra are observed and discussed in terms of morphology. MALDI‐TOF spectra show the formation of at least seven species. Differential scanning calorimetry (DSC) and Wide Angle X‐Ray Scattering (WAXS) results demonstrate the high degree of crystallinity present in all the polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5792–5805, 2009