Synthesis and characterization of biodegradable amphiphilic ABC Y‐shaped miktoarm terpolymer by click chemistry for drug delivery

Biodegradable amphiphilic ABC Y‐shaped triblock copolymer (MPBC) containing PEG, PBLA, and PCL segments was synthesized via the combination of enzymatic ring‐opening polymerization (ROP) of epsilon‐caprolactone, ROP of BLA‐N‐carboxyanhydride and click chemistry, where PEG, PBLA, and PCL are poly(ethylene glycol), poly(benzyl‐l ‐aspartate), and polycaprolactone, respectively. Propynylamine was employed as ROP initiator for the preparation of alkynyl‐terminated PBLA and methyloxy‐PEG with hydroxyl and azide groups at the chain‐end was used as enzymatic ROP initiator for synthesis of monoazido‐midfunctionalized block copolymer mPEG‐b‐PCL. The subsequent click reaction led to the formation of Y‐shaped asymmetric heteroarm terpolymer MPBC. The polymer structures were characterized by different analyses. The MPBC terpolymer self‐assembled into micelles and physically encapsulated drug doxorubicin (DOX) to form DOX‐loaded micelles, which showed good stability and slow drug release. In vitro cytotoxicity study indicated that the MPBC micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3346–3355     

Synthesis and characterization of biodegradable pH and reduction dual‐sensitive polymeric micelles for doxorubicin delivery

Novel pH and reduction dual‐sensitive biodegradable polymeric micelles for efficient intracellular delivery of anticancer drugs were prepared based on a block copolymer of methyloxy‐poly(ethylene glycol)‐b‐poly[(benzyl‐l ‐aspartate)‐co‐(N‐(3‐aminopropyl) imidazole‐l ‐aspartamide)] [mPEG‐SS‐P(BLA‐co‐APILA), MPBA] synthesized by a combination of ring‐opening polymerization and side‐chain reaction. The pH/reduction‐responsive behavior of MPBA was observed by both dynamic light scattering and UV–vis experiments. The polymeric micelles and DOX‐loaded micelles could be prepared simply by adjusting the pH of the polymer solution without the use of any organic solvents. The drug release study indicated that the DOX‐loaded micelles showed retarded drug release in phosphate‐buffered saline at pH 7.4 and a rapid release after exposure to weakly acidic or reductive environment. The empty micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. Confocal microscopy observation demonstrated that the DOX‐loaded MPBA micelles can be quickly internalized into the cells, and effectively deliver the drugs into nuclei. Thus, the pH and reduction dual‐responsive MPBA polymeric micelles are an attractive platform to achieve the fast intracellular release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1771–1780     

Effect of PLGA block molecular weight on gelling temperature of PLGA‐PEG‐PLGA thermoresponsive copolymers

Thermoresponsive, biodegradable polymeric hydrogel networks are used widely in medicinal applications. Poly(d ,l ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(d ,l ‐lactic acid‐co‐glycolic acid) (PLGA‐PEG‐PLGA) triblock copolymers exhibit a sol–gel transition upon heating. The effect of PLGA block and PEG chain molecular weights (MWs) on the gelling temperature of polymer aqueous solution (20% w/w) is described. All polymer solutions convert into a hard gel within 2 °C of the gelling temperature. The release properties of the gels were displayed using paracetamol as a representative drug. A linear relation is described between the gelling temperature and PLGA block MW. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 35–39     

Preparation of amphiphilic copolymers for covalent loading of paclitaxel for drug delivery system

A novel drug‐polymer conjugate was prepared by the copper‐catalyzed azide–alkyne cycloaddition reaction between an azide‐functional diblock copolymer and an alkyne‐functional paclitaxel (PTX). The well‐defined azide‐functional diblock copolymer, poly(ethylene glycol) (PEG)‐b‐P(OEGEEMA‐co‐AzPMA), was synthesized via the atom transfer radical polymerization of oligo(ethylene glycol) ethyl ether methacrylate (OEGEEMA) and 3‐azidopropyl methacrylate (AzPMA), using PEG‐Br as macroinitiator and CuBr/PMDETA as a catalytic system. The alkyne‐functional PTX was covalently linked to the copolymer via a click reaction, and the loading content of PTX could be easily tuned by varying the feeding ratio. Transmission electron microscopy and dynamic light scattering results indicated that the drug loaded copolymers could self‐assemble into micelles in aqueous solution. Moreover, the drug release behavior of PEG‐b‐P(OEGEEMA‐co‐AzPMA‐PTX) was pH dependent, and the cumulative release amount of PTX were 50.0% at pH 5.5, which is about two times higher than that at pH 7.4. The in vitro cytotoxicity experimental results showed that the diblock copolymer was biocompatible, with no obvious cytotoxicity, whereas the PTX‐polymer conjugate could efficiently deliver PTX into HeLa and SKOV‐3 cells, leading to excellent antitumor activity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 366–374     

Gelation characteristics and applications of poly(ethylene glycol) end capped with hydrophobic biodegradable dipeptides

Poly(ethylene glycol) (PEG) end capped with biodegradable hydrophobic dipeptides shows versatile gelation behavior in a wide range of aqueous and organic solvents. This gelation characteristic is attributed to the aggregation of polymer chains induced by dipeptide end groups. Both PEG molecular weight and molecular structure of end groups control this aggregation by striking a balance between two opposing molecular interactions: solubility of the PEG segment which tends to dissolve the polymer while hydrophobic and intermolecular noncovalent interactions between the end groups induce aggregation. Morphologically, this aggregated structure forms interpenetrating nano sheets with characteristic microstructural features. These gels are biodegradable and possess physicomechanical characteristics suitable for biomedical applications. Furthermore, proteins and hydrophobic model drugs can be encapsulated within the gels from aqueous and organic solvents, respectively, and can be released in a controlled fashion which indicates the applicability of the gels as drug delivery vehicles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1917–1928     

Poly(p‐phenylene) with Poly(ethylene glycol) Chains and Amino Groups as a Functional Platform for Controlled Drug Release and Radiotherapy

Conventional cancer treatments such as chemotherapy, radiotherapy, or combination of these two result in side effects, which lower the quality of life of the patients. To overcome problems with these methods, altering the drug properties by conjugating them to carrier polymers has emerged. Such polymeric carriers also hold the potential to make tumor cells more sensitive to radiation therapy. Herein, poly(p‐phenylene) (PPP) polymer with poly(ethylene glycol) (PEG) chains and primary amino groups (PPP‐NH₂‐g‐PEG) is synthesized and conjugated with anticancer drug Doxorubicin (DOX). pH dependent drug release experiments are performed at pH 5.3 and pH 7.4, respectively. Cell viability studies on human cervix adenocarcinoma cells show that lower doses of DOX inhibit cell proliferation when conjugated with nontoxic doses of PPP‐NH₂‐g‐PEG polymer. Additionally, PPP‐NH₂‐g‐PEG/Cys/DOX bioconjugate significantly increases radiosensitive properties of DOX. It is possible to use lower doses of DOX when conjugated to PPP‐NH₂‐g‐PEG in combination with radiotherapy.

     

Synthesis of pentablock and multibranched copolymers bearing poly(ethylene glycol), hyperbranched polyglycidol,and poly(L‐lactide) with biocompatibility for controlled drug release

A series of multibranched pentablock copolymer (mBr5BlC), poly(L ‐lactide)‐b‐HBP‐b‐poly(ethylene glycol)‐b‐HBP‐b‐poly(L ‐lactide) (HBP = hyperbranched polyglycidol), has been synthesized by ring‐opening multibranching polymerization of glycidol using bifunctional poly(ethylene glycol) [PEG; molecular weight (MW) = 1000] as an initiator, followed by ring‐opening polymerization (ROP) of L ‐lactide in the presence of stannous octoate. The ROP of different amounts of L ‐lactide on HBP‐b‐PEG‐b‐HBP [MW = 2550; polydispersity index (PDI) = 1.08] yielded a series of the targeted mBr5BlCs of the MW range of 4360–15,300 with narrow PDI. All the mBr5BlCs have been well demonstrated to be in possession of good biocompatibility as biomaterials for various applications in biological medicine areas. The mBr5BlCs with tunable MW exhibited promising controllability in self‐assembly into spherical micellar structures with an average diameter range of 59–140 nm, which have no acute and intrinsic cytotoxicity against normal cells and provide a convenient strategy for drug loading. The anticancer drug doxorubicin was demonstrated to have a good affinity with the copolymer system, and its controlled release was performed in various pHs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Water-soluble dendrimer–poly(ethylene glycol) starlike conjugates as potential drug carriers

The design and synthesis of a new dendrimer–poly(ethylene glycol) (PEG) conjugate that may be used as a model drug carrier are described. The starting material is a polyether dendrimer with two different types of chain end functionalities. The dendritic assembly is made water soluble through attachment of short PEG chains to the dendrimer via one type of functionality. The remaining chain end functionalities then were used to incorporate model drug molecules of varying polarity into the modified dendrimer. Cholesterol and two amino acid derivatives were selected as model drugs for attachment through their respective hydroxyl, carboxylic acid, and amino functional groups to the dendrimer via carbonate, ester, and carbamate linkages. The resulting water-soluble dendrimer-model drug conjugates were characterized by matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3492–3503, 1999     

Nanosegregated polymeric domains on the surface of Fe3O4@SiO2 particles

Multifunctional, biocompatible, and brush‐grafted poly(ethylene glycol)/poly(ε‐caprolactone) (PEG/PCL) nanoparticles have been synthesized, characterized, and used as vehicles for transporting hydrophobic substances in water. For anchoring the polymer mixed brushes, we used magnetic‐silica particles of 40 nm diameter produced by the reverse microemulsion method. The surface of the silica particle was functionalized with biocompatible polymer brushes, which were synthesized by the combination of “grafting to” and “grafting from” techniques. PEG was immobilized on the particles surface, by “grafting to,” whereas PCL was growth by ROP using the “grafting from” approach. By varying the synthetic conditions, it was possible to control the amount of PCL anchored on the surface of the nanoparticles and consequently the PEG/PCL ratio, which is a vital parameter connected with the arrangement of the polymer brushes as well as the hydrophobic/hydrophilic balance of the particles. Thus, adjusting the PEG/PCL ratio, it was possible to obtain a system formed by PEG and PCL chains grafted on the particle's surface that collapsed in segregated domains depending on the solvent used. For instance, the nanoparticles are colloidally stable in water due to the PEG domains and at the same time are able to transport, entrapped within the PCL portion, highly water‐insoluble drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2966–2975     

Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Antibacterial poly(ethylene glycol) hydrogels from combined epoxy‐amine and thiol‐ene click reaction

Antibacterial hydrogels containing quaternary ammonium (QA) groups were prepared via a facile thiol‐ene “click” reaction using multifunctional poly(ethylene glycol) (PEG). The multifunctional PEG polymers were prepared by an epoxy‐amine ring opening reaction. The chemical and physical properties of the hydrogels could be tuned with different crosslinking structures and crosslinking densities. The antibacterial hydrogel structures prepared from PEG Pendant QA were less well‐defined than those from PEG Chain‐End QA. Furthermore, functionalization of the PEG‐type hydrogels with QA groups produced strong antibacterial abilities against Staphylococcus aureus, and therefore has the potential to be used as an anti‐infective material for biomedical devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 656–667     

pH‐ and β‐cyclodextrin‐responsive micelles based on polyaspartamide derivatives as drug carrier

A novel kind of graft polymer poly(aspartic acid)‐ethanediamine‐g‐adamantane/methyloxy polyethylene glycol (Pasp‐EDA‐g‐Ad/mPEG) was designed and synthesized for drug delivery in this study. The chemical structure of the prepared polymer was confirmed by proton NMR. The obtained polymer can self‐assemble into micelles which were stable under a physiological environment and displayed pH‐ and β‐cyclodextrin (β‐CD)‐responsive behaviors because of the acid‐labile benzoic imine linkage and hydrophobic adamantine groups in the side chains of the polymer. The doxorubicin (Dox)‐loaded micelles showed a slow release under physiological conditions and a rapid release after exposure to weakly acidic or β‐CD environment. The in vitro cytotoxicity results suggested that the polymer was good at biocompatibility and could remain Dox biologically active. Hence, the Pasp‐EDA‐g‐Ad/mPEG micelles may be applied as promising controlled drug delivery system for hydrophobic antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1387–1395     

Poly(ethylene glycol)/poly(ethyl cyanoacrylate) amphiphilic triblock copolymer nanoparticles as delivery vehicles for dexamethasone

Amphiphilic triblock copolymers, poly(ethyl cyanoacrylate)‐b‐poly(ethylene glycol)‐b‐poly(ethyl cyanoacrylate) (PECA‐b‐PEG‐b‐PECA), were synthesized via oxyanion‐initiated polymerization with sodium alcoholate‐terminated PEG as macroinitiator. PECA‐b‐PEG‐b‐PECA were characterized by gel permeation chromatography system, ¹H NMR and FTIR. The results indicate that the copolymerization is well controlled with narrow molecular weight distribution. The dexamethasone (DXM)‐loaded PECA‐b‐PEG‐b‐PECA nanoparticles (NPs) were prepared by nanoprecipitation technique and then characterized by Laser Particle Size Analyzer, ¹H NMR and transmission electron microscopy. The drug‐loaded PECA‐b‐PEG‐b‐PECA NPs are of spherical shape with average size of less than 100 nm. The drug‐loaded amount (DLA) and encapsulation efficiency of DLNPs were investigated by HPLC. The results show that DXM can be effectively incorporated into PECA‐b‐PEG‐b‐PECA NPs, which provides an optional delivery system for DXM and other hydrophobic drugs. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7809–7815, 2008     

Synthesis and properties of monocleavable amphiphilic comblike copolymers with alternating PEG and PCL grafts

Symmetric reduction‐responsive amphiphilic comblike copolymers mid‐disulfide‐functionalized comblike copolymers with alternating copolymer comprised of styrenic unit and N‐(2‐hydroxyethyl) maleimide (HEMI) unit (poly(St‐alt‐HEMI)) backbones and alternating PEG and PCL side chains (S‐CP(PEG‐alt‐PCL)) with poly(St‐alt‐HEMI) backbones and alternating poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) side chains were synthesized and used as nanocarriers for in vitro release of doxorubicin. The target copolymers with predetermined molecular weight and narrow molecular weight distribution (M_w/M_n = 1.15–1.20) were synthesized by reversible addition‐fragmentation chain transfer (RAFT) copolymerization of vinylbenzyl‐terminated PEG and N‐(2‐hydroxyethyl) maleimide mediated by a disulfide‐functionalized RAFT agent S‐CPDB, and followed by ring‐opening polymerization of ε‐caprolactone. When compared with linear block copolymer comprised of poly(ethylene glycol) (PEG) and poly(?‐caprolactone) (PCL) segments (PEG‐b‐PCL) copolymers, comblike copolymers with similar PCL contents usually exhibited decreased crystallization temperature, melting temperature, and degree of crystallinity, indicating the significant influence of copolymer architecture on physicochemical properties. Dynamic light scattering measurements revealed that comblike copolymers were liable to self‐assemble into aggregates involving vesicles and micelles with average diameter in the range of 56–226 nm and particle size distribution ranging between 0.07 and 0.20. In contrast to linear copolymer aggregates, comblike copolymer aggregates with similar compositions were of improved storage stability and enhanced drug‐loading efficiency. In vitro drug release confirmed the disulfide‐linked comblike copolymer aggregates could rapidly release the encapsulated drug when triggered by 10 mM DL ‐dithiothreitol. These reduction‐sensitive, biocompatible, and biodegradable aggregates have a potential as controlled delivery vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dual‐responsive crosslinked micelles of a multifunctional graft copolymer for drug delivery applications

A novel multifunctional amphiphilic graft copolymer has been synthesized consisting of a biodegradable poly(l ‐aspartic acid) backbone that was decorated by water‐soluble poly(ethylene glycol) (PEG) and pH‐responsive poly(N,N‐diethylaminoethyl methacrylate) (PDEAEMA) side‐chains as well as thiol pendant groups. This graft copolymer together with doxorubicin (DOX) formed micelles in water at pH = 10.0 with PDEAEMA and DOX acting as the core and PEG serving as the micellar corona. Upon oxidation, the thiol groups dimerized to form disulfide bonds, thus “locking in” the micellar structure. These crosslinked micelles expanded as the pH was decreased from 7.4 to 5.0 or upon the addition, at pH = 7.4, of glutathione (GSH), a thiol‐containing oligopeptide that is present in cancerous cells and cleaves disulfide bonds. At pH = 5.0, GSH addition triggered the disassembly of the micelles. The expansion and disassembly of the micelles have been determined via in vitro experiments to evaluate their DOX release behavior. More importantly, the graft copolymer micelles could enter cells by means of endocytosis and deliver DOX to the nuclei of ovarian cancer BEL‐7402 cells. Thus, this polymer and its micelles are promising candidates for drug delivery applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1536–1546     

pH‐sensitive polymeric micelles based on amphiphilic polypeptide as smart drug carriers

A series of amphiphilic diblock copolymers having poly(ethylene glycol) (PEG) as one block and a polypeptide as the other block were synthesized by ring‐opening polymerization using PEG‐amine as a macroinitiator. These polymers were characterized by ¹H‐NMR and gel permeation chromatography. The influence of the substitution ratio of tertiary amine‐containing groups on the pH sensitivity of the polymers was investigated in detail. Core/shell‐structured micelles were fabricated from these polymers using an organic solvent‐free method. pH‐ and concentration‐dependent micellization behaviors were investigated by dynamic light scattering and fluorescence microscopy. Micelles loaded with doxorubicin, selected as a model drug, showed restricted drug release at physiological pH but accelerated drug release at tumor extracellular pH. Collectively, our findings suggest that these pH‐sensitive micelles might have great potential for cancer therapy applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4175–4182     

Block copolymer composition drives function of self‐assembled nanoparticles for delivery of small‐molecule cargo

Nanoparticles are useful for the delivery of small molecule therapeutics, increasing their solubility, in vivo residence time, and stability. Here, we used organocatalytic ring opening polymerization to produce amphiphilic block copolymers for the formation of nanoparticle drug carriers with enhanced stability, cargo encapsulation, and sustained delivery. These polymers comprised blocks of poly(ethylene glycol) (PEG), poly(valerolactone) (PVL), and poly(lactide) (PLA). Four particle chemistries were examined: (a) PEG‐PLA, (b) PEG‐PVL, (c) a physical mixture of PEG–PLA and PEG–PVL, and (d) PEG–PVL–PLA tri‐block copolymers. Nanoparticle stability was assessed at room temperature (20 °C; pH = 7), physiological temperature (37 °C; pH = 7), in acidic media (37 °C; pH = 2), and with a digestive enzyme (lipase; 37 °C; pH = 7.4). PVL‐based nanoparticles demonstrated the highest level of stability at room temperature, 37 °C and acidic conditions, but were rapidly degraded by lipase. Moreover, PVL‐based nanoparticles demonstrated good cargo encapsulation, but rapid release. In contrast, PLA‐based nanoparticles demonstrated poor stability and encapsulation, but sustained release. The PEG–PVL–PLA nanoparticles exhibited the best combination of stability, encapsulation, and release properties. Our results demonstrate the ability to tune nanoparticle properties by modifying the polymeric architecture and composition. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1322–1332     

pH‐responsive near‐infrared emitting conjugated polymer nanoparticles for cellular imaging and controlled‐drug delivery

In this article, pH‐responsive near‐infrared emitting conjugated polymer nanoparticles (CPNs) are prepared, characterized, and their stabilities are investigated under various conditions. These nanoparticles have capacity to be loaded with water insoluble, anticancer drug, camptothecin (CPT), with around 10% drug loading efficiency. The in vitro release studies demonstrate that the release of CPTs from CPNs is pH‐dependent such that significantly faster drug release at mildly acidic pH of 5.0 compared with physiological pH 7.4 is observed. Time and dose‐dependent in vitro cytotoxicity tests of blank and CPT‐loaded nanoparticles are performed by real‐time cell electronic sensing (RT‐CES) assay with hepatocellular carcinoma cells (Huh7). The results indicate that CPNs can be effectively utilized as vehicles for pH‐triggered release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 114–122     

Temperature and pH dual‐sensitive polyaspartamide derivatives for antitumor drug delivery

The pH‐sensitive tertiary amino groups were introduced to synthesize temperature and pH dual‐sensitive degradable polyaspartamide derivatives (phe/DEAE‐g‐PHPA) containing pendant aromatic structures and ionizable tertiary amino groups. The thermo/pH‐responsive behavior of phe/DEAE‐g‐PHPA polymer can be tuned by adjusting the graft copolymer composition. Due to the pH sensitivity of the phe/DEAE‐g‐PHPA‐g‐mPEG polymer with hydrophilic long PEG chain, the micelles and the anticancer drug‐loaded micelles were prepared by a quick pH‐changing method without using toxic organic solvent. The obtained polymeric micelles, paclitaxel‐loaded micelles and doxorubicin‐loaded micelles were stable under physiological conditions. Both the drug‐loaded micelles showed much faster release at pH 5 than at pH 7.4. The doxorubicin‐loaded micelles showed obvious and better anticancer activity against both HepG2 and HeLa cells than free doxorubicin. Thus these nontoxic, dual thermo‐ and pH‐sensitive phe/DEAE‐g‐PHPA‐g‐mPEG micelles may be a promising anticancer drug delivery system. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 879–888     

Synthesis of end‐functionalized AB copolymers. II. Synthesis and characterization of carboxyl‐terminated poly(ethylene glycol)–poly(amino acid) block copolymers

AB block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(amino acid) with a carboxyl group at the end of PEG were synthesized with α‐carboxylic sodium‐ω‐amino‐PEG as a macroinitiator for the ring‐opening polymerization of N‐carboxy anhydride. Characterizations by ¹H NMR, IR, and gel permeation chromatography were carried out to confirm that the diblock copolymers were formed. In aqueous media this copolymer formed self‐associated polymer micelles that have a carboxyl group on the surface. The carboxyl groups located at the outer shell of the polymeric micelle were expected to combine with ligands to target specific cell populations. The diameter of the polymer micelles was in the range of 30–80 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3527–3536, 2004