Allyl sulfides and α‐substituted acrylates as addition–fragmentation chain transfer agents for methacrylate polymer networks

The rapid and uncontrolled nature of network formation from di(meth)acrylate monomers produces high shrinkage stress and results in polymers with oftentimes brittle mechanical properties. Methods for regulating polymerization and network formation are sought. One option is the use of addition–fragmentation chain transfer (AFCT) agents, which are well known to control molecular weight and molecular weight distribution of monofunctional (meth)acrylates. A series of novel and previously described AFCT reagents were synthesized and screened with laser flash photolysis to determine reactivity. Well‐performing AFCT reagents were then tested in polymerizations with monofunctional and difunctional methacrylates. With monofunctional monomers, the molecular weight and polydispersity of the resultant linear polymers tend to decrease with the addition of AFCT agent. In copolymerization with dimethacrylate monomers, the AFCT agents were found to substantially lower and sharpen the glass transition. Sharpness of the glass transition is here indicative of a more regular and homogenous network. After coupling of the instruments, photorheology was performed simultaneously with real‐time IR to show an increase in monomer conversion at the time of gelation, which appears to have a positive effect on reducing shrinkage stress. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 394–406     

Macromonomer synthesis using α‐(2‐methyl‐2‐phenylpropyl)acrylates as addition–fragmentation chain‐transfer agents expelling the cumyl radical

α‐(2‐Methyl‐2‐phenylpropyl)acrylate (RS‐2) was examined as a C? C bond‐cleavage type addition–fragmentation chain transfer (AFCT) agent in the benzene solution polymerizations of styrene (St), ethyl methacrylate (EMA), and cyclohexyl acrylate (CHA) with the objective of achieving efficient macromonomer synthesis by radical polymerization. The AFCT efficiency was evaluated in terms of the decrease in the number‐average molecular weight (M_n) upon the addition of the AFCT agent and the number of unsaturated end groups introduced per chain (f). The AFCT efficiency was rationalized by the consideration of the relative importance of AFCT as an end‐forming event and the competition between ‐fragmentation and crosspropagation as adduct radical reaction pathways. In St and EMA polymerizations at 60 °C, RS‐2 resulted in higher f values and lower M_n values than methyl α‐(2‐methyl‐2‐carbomethoxypropyl)acrylate (MMA‐2), and this suggested the facilitation of ‐fragmentation due to the expulsion of the more stable cumyl radical from the RS‐2 adduct radical. Higher f values were observed for MMA‐2 than for RS‐2 in CHA polymerization because of unsaturated end group formation by ‐fragmentation of midchain radicals. However, RS‐2 resulted in lower M_n values for poly(CHA) than MMA‐2 because of a smaller contribution of crosspropagation. Retardation in the presence of the AFCT agents was affected by the balance between b‐fragmentation and crosspropagation and by the addition rate of the propagating radical to the AFCT agent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6021–6030, 2004     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Homopolymerization of cyclic esters initiated by lanthanide isopropoxides supported by 2,2′‐ethylene‐bis(4,6‐di‐tert‐butylphenolate) ligands

Lanthanide isopropoxides supported by carbon‐bridged bisphenolate ligands of 2,2′‐ethylene‐bis(4,6‐di‐tert‐butylphenoxo) {[(EDBP)Ln(μ‐OPrⁱ)(THF)₂]₂, where Ln is Nd ( 1 ), Sm ( 2 ), or Yb ( 3 ) and THF is tetrahydrofuran} were synthesized by protic exchange reactions in high yields with Cp₃Ln compounds as raw materials, and complex 1 was structurally characterized. Complexes 1 – 3 were shown to be efficient initiators for the ring‐opening polymerization of ε‐caprolactone (ε‐CL) and 2,2‐dimethyltrimethylene carbonate (DTC). Complexes 1 – 3 could initiate the controlled polymerization of ε‐CL, and the polymerization rate was first‐order with respect to the monomer. The influence of the reaction conditions on the monomer conversion, molecular weight, and molecular weight distribution of the resultant polymers was investigated. End‐group analyses of the oligomers of ε‐CL and DTC showed that the polymerization underwent a coordination–insertion mechanism. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4409–4419, 2006     

Polymerization of styrene with tetramethylthiuram disulfide as an initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy

The bulk polymerization of styrene was investigated with tetramethylthiuram disulfide (TMTD) as an initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) at 123 °C. The polymerization proceeded in a controlled/living way; that is, the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with conversion. The molecular weights of the polymers obtained were close to the theoretical values, and the molecular weight distributions were relatively low (weight‐average molecular weight/number‐average molecular weight = 1.1–1.3). The rate of polymerization with TMTD as an initiator was faster than that with benzoyl peroxide, and the rate was independent of the initial concentration of TMTD in the presence of TEMPO. The obtained polystyrene was functionalized with ultraviolet‐light‐sensitive ? SC(S)N(CH₃)₂ groups, which was characterized with ¹H NMR spectroscopy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 543–551, 2005     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hyperbranched polymers as scaffolds for multifunctional reversible addition–fragmentation chain‐transfer agents: A route to polystyrene‐core‐polyesters and polystyrene‐block‐poly(butyl acrylate)‐core‐polyesters

Polydisperse hyperbranched polyesters were modified for use as novel multifunctional reversible addition–fragmentation chain‐transfer (RAFT) agents. The polyester‐core‐based RAFT agents were subsequently employed to synthesize star polymers of n‐butyl acrylate and styrene with low polydispersity (polydispersity index < 1.3) in a living free‐radical process. Although the polyester‐core‐based RAFT agent mediated polymerization of n‐butyl acrylate displayed a linear evolution of the number‐average molecular weight (M_n) up to high monomer conversions (>70%) and molecular weights [M_n > 140,000 g mol^?1, linear poly(methyl methacrylate) equivalents)], the corresponding styrene‐based system reached a maximum molecular weight at low conversions (≈30%, M_n = 45,500 g mol^?1, linear polystyrene equivalents). The resulting star polymers were subsequently used as platforms for the preparation of star block copolymers of styrene and n‐butyl acrylate with a polyester core with low polydispersities (polydispersity index < 1.25). The generated polystyrene‐based star polymers were successfully cast into highly regular honeycomb‐structured microarrays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3847–3861, 2003     

In situ atom transfer radical polymerization of styrene with a tetraethylthiuram disulfide/copper bromide/2,2′‐bipyridine initiating system

The living radical polymerization of styrene in bulk was successfully performed with a tetraethylthiuram disulfide/copper bromide/2,2′‐bipyridine (bpy) initiating system. The initiator Et₂NCS₂Br and the catalyst cuprous bromide (CuBr) were produced from the reactants in the system through in situ atom transfer radical polymerization (ATRP). A plot of natural logarithm of the ratio of original monomer concentration to monomer concentration at present, ln([M]₀/[M]) versus time gave a straight line, indicating that the kinetics was first‐order. The number‐average molecular weight from gel permeation chromatography (GPC) of obtained polystyrenes did not agree well with the calculated number‐average molecular weight but did correspond to a 0.5 initiator efficiency. The polydispersity index (i.e., the weight‐average molecular weight divided by the number‐average molecular weight) of obtained polymers was as low as 1.30. The resulting polystyrene with α‐diethyldithiocarbamate and ω‐Br end groups could initiate methyl methacrylate polymerization in the presence of CuBr/bpy or cuprous chloride/bpy complex catalyst through a conventional ATRP process. The block polymer was characterized with GPC, ¹H NMR, and differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4001–4008, 2001     

New chiral [N,N,N]‐ligand containing titanium/zirconium precatalysts for 1‐hexene polymerization

The ring‐opening reaction of (S)‐N‐tosyl‐2‐phenylaziridine by benzylamine in ethanol at 80 °C resulted in the formation of the (S,S)‐bis(N‐tosyl‐2‐amino‐2‐phenylethyl)benzylamine ligand in a 60% yield. The corresponding titanium complex, 1‐TiCl₂, was prepared by the reaction of the dilithiated parent ligand with TiCl₄. This precatalyst, in combination with methylaluminoxane, was capable of polymerizing 1‐hexene with good activities, resulting in the formation of good yields of low‐dispersity, high‐molecular‐weight polymers at low temperatures but higher yields of lower molecular weight polymers at higher temperatures. ¹H and ¹³C NMR spectra of the polymers suggested high isotacticity and predominant chain termination via β‐hydride elimination. The enantiomerically pure catalysts, (R,R)‐1‐TiCl₂ and (S,S)‐1‐TiCl₂, showed nearly identical polymerization results at various polymerization temperatures. However, when the catalyst was prepared from a racemic ligand, the obtained polymers had lower molecular weights with a bimodal distribution. This observation suggested diastereomeric aggregation of the racemic catalyst, which was well supported by the NMR studies, and a modified Arrhenius plot (the natural logarithm of the number‐average molecular weight vs the reciprocal of the temperature) also showed sigmoidal behavior, indicating the existence of two or more active species. Analogous zirconium precatalysts showed similar results in the polymerization of 1‐hexene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4006–4014, 2006     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Stereospecific and molecular weight‐controlled polymerization of 1,3‐butadiene with Co(acac)3‐MAO catalyst

The polymerization of butadiene (Bd) with Co(acac)₃ in combination with methylaluminoxane (MAO) was investigated. The polymerization of Bd with Co(acac)₃‐MAO catalysts proceeded to give cis‐1,4 polymers (94 – 97%) bearing high molecular weights (40 × 10⁴) with relatively narrow molecular weight distributions (M_w's/M_n's). The molecular weight of the polymers increased linearly with the polymer yield, and the line passed through an original point. The polydispersities of the polymers kept almost constant during reaction time. This indicates that the microstructure and molecular weight of the polymers can be controlled in the polymerization of Bd with the Co(acac)₃‐MAO catalyst. The effects of reaction temperature, Bd concentration, and the MAO/Co molar ratio on the cis‐1,4 microstructure and high molecular weight polymer in the polymerization of Bd with Co(acac)₃‐MAO catalyst were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2793–2798, 2001     

Oxidation polymerization of a charge‐transfer complex of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene with 7,7,8,8‐tetracyanoquinodimethane

A π‐conjugated poly(α‐dithienylen‐dithiafulvene) ( 2 ) was obtained by the oxidation polymerization of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene ( 1 ) as a dithiafulvene monomer derived from 4‐(2‐thienyl)‐1,2,3‐thiadiazole. When a solution of 1 in CHCl₃ was added to a stirred solution of FeCl₃ in CHCl₃, only the low‐molecular‐weight product 2 was obtained. The mixture was stirred for 15 h with an N₂ flow. The polymerization at higher temperatures resulted in polymers with large insoluble fractions. A higher molecular weight polymer was obtained by the oxidation polymerization of a charge‐transfer complex of 1 with 7,7,8,8‐tetracyanoquinodimethane (compound 3 ). In contrast to 2 , polymer 4 was readily soluble in dimethyl sulfoxide, dimethylformamide, and acetone and partially soluble in tetrahydrofuran and methanol and had a larger molecular weight (peak top molecular weight = 37,000). The conductivity of polymer 4 was 3 orders of magnitude larger than that of polymer 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6592–6598, 2005     

One‐step synthesis of polycarbonates bearing pendant carboxyl groups by lipase‐catalyzed ring‐opening polymerization

The ring‐opening polymerization of a monomer containing a free carboxylic acid group is reported for the first time. The monomer, 5‐methyl‐5‐carboxyl‐1,3‐dioxan‐2‐one (MCC), was copolymerized with trimethylene carbonate (TMC) in an enzymatic ring‐opening polymerization conducted in bulk at 80 °C. The low‐melting TMC comonomer also solubilized the high‐melting MCC monomer, allowing for solvent‐free polymerizations. Six commercially available lipases were screened, and Candida antarctica lipase‐B (Novozym‐435) and Pseudomonas cepacia lipase were selected to catalyze the copolymerization because of their higher monomer conversions. Higher molecular weight polymers (weight‐average molecular weight = 7800–9200) were prepared when Novozym‐435 was used, with less MCC incorporated into the copolymer than used in the monomer feed. However, Pseudomonas cepacia lipase showed good agreement between the molar feed ratios and the molar composition, but the molecular weights (weight‐average molecular weight = 3600–4800) were lower than those obtained when Novozym‐435 was used. ¹³C NMR spectral data were used for microstructural analysis, which suggested the formation of random, linear, and pendant carboxylic acid groups containing polycarbonates with hydroxyl groups at both chain ends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1267–1274, 2002     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Chain‐growth condensation polymerization approach to synthesis of well‐defined polybenzoxazole: Importance of higher reactivity of 3‐amino‐4‐hydroxybenzoic acid ester compared to 4‐amino‐3‐hydroxybenzoic acid ester

Application of chain‐growth condensation polymerization (CGCP) to obtain well‐defined polybenzoxazole (PBO) was examined. CGCP of both phenyl 3‐{(2‐methoxyethoxy)methoxy (MEM‐oxy)}‐4‐(octylamino)benzoate ( 1b ) (para‐substituted monomer) and phenyl 4‐MEM‐oxy‐3‐(octylamino)benzoate ( 3b ) (meta‐substituted monomer) was examined in the presence of metal disilazide base and phenyl 4‐nitro‐ or methylbenzoate 2 as an initiator. Polymerization of the latter monomer, but not the former, afforded polymer with controlled molecular weight based on the feed ratio of monomer to initiator and with a narrow molecular weight distribution. Accordingly, monomer 3c , in which the octyl group on the amino nitrogen of 3b was replaced with a 4‐(octyloxy)benzyl (OOB) group, was polymerized in the presence of lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS), phenyl 4‐methylbenzoate ( 2b ), and LiCl in THF at 0 °C to yield poly 3c with well‐defined molecular weight (M_n = 4520–9080) and low polydispersity (M_w/M_n ≤ 1.11). Treatment of poly 3c with trifluoroacetic acid simultaneously removed the MEM and OOB groups, affording poly(o‐hydroxyamide) (poly 4 ) without scission of the amide linkages. Cyclodehydration of poly 4 proceeded at 350 °C to yield PBO (poly 5 ), which was insoluble in organic solvents and acids. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1730–1736     

RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of high molecular weight trans‐poly(9,9‐di‐n‐octylfluorene‐2,7‐vinylene) by the acyclic diene metathesis polymerization using molybdenum catalysts

High molecular weight trans‐poly(9,9‐di‐n‐octylfluorene‐2,7‐vinylene) was prepared under reduced pressure in the presence of a well‐defined Schrock‐type catalyst, Mo(CHCMe₂Ph)(N‐2,6‐Me₂C₆H₃)[OCMe(CF₃)₂]₂, in toluene. The effect of initial monomer concentration was found to be an important factor for preparing high molecular weight polymers with unimodal molecular weight distributions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2463–2470, 2001     

Bifunctional 2‐(alkoxycarbonothioylthio)acetic acids for the synthesis of TiO2‐poly(vinyl acetate) nanocomposites via RAFT polymerization

Reversible addition‐fragmentation chain‐transfer (RAFT) polymerization has been known as a convenient method for the synthesis of polymers of designed molecular structures. Of particular interest are bifunctional or multifunctional chain‐transfer agents (CTAs) which could be employed in the development of advanced materials via RAFT polymerization. In the present study, four bifunctional 2‐(alkoxycarbonothioylthio) RAFT CTAs with ? COOH functionalities containing methoxy, ethoxy, isopropoxy, and octyloxy groups, respectively, were synthesized and characterized by FTIR and NMR spectroscopy. Polymerizations of vinyl acetate using these CTAs exhibited increased molecular weight with consumption of monomer and relatively narrow dispersities, indicative of living polymerization behavior. The effect of the concentration of 2‐(ethoxycarbonothioylthio) acetic acid on the polymerization was examined, revealing that higher concentration of CTA led to lower molecular weight and narrower dispersity. As an example of the application of the synthesized bifunctional CTAs, TiO₂‐poly(vinyl acetate) (PVAc) nanocomposites were synthesized via a one‐pot process and characterized by TGA, DSC, TEM, and affinity test, suggesting attachment of PVAc onto the nano‐TiO₂ particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 606–618     

Controlled/living free‐radical copolymerization of 4‐(azidocarbonyl) phenyl methacrylate with methyl acrylate under 60Co γ‐ray irradiation

A new vinyl acyl azide monomer, 4‐(azidocarbonyl) phenyl methacrylate, has been synthesized and characterized by NMR and FTIR spectroscopy. The thermal stability of the new monomer has been investigated with FTIR and thermal gravimetry/differential thermal analysis (TG/DTA), and the monomer has been demonstrated to be stable below 50 °C in the solid state. The copolymerizations of the new monomer with methyl acrylate have been carried out at room temperature under ⁶⁰Co γ‐ray irradiation in the presence of benzyl 1H‐imidazole‐1‐carbodithioate. The results show that the polymerizations bear all the characteristics of controlled/living free‐radical polymerizations, such as the molecular weight increasing linearly with the monomer conversion, the molecular weight distribution being narrow (<1.20), and a linear relationship existing between ln([M]₀/[M]) and the polymerization time. The data from ¹H NMR and FTIR confirm that no change in the acyl azide groups has occurred in the polymerization process and that acyl azide copolymers have been obtained. The thermal stability of the polymers has also been investigated with TG/DTA and FTIR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2609–2616, 2007