Biodegradable and thermosensitive micelles of amphiphilic polyaspartamide derivatives containing aromatic groups for drug delivery

The preparation, characterization, release, and in vitro cytotoxicity of a biodegradable polymeric micellar formulation of paclictaxel (PTX) were investigated. The micelles based on thermosensitive and degradable amphiphilic polyaspartamide derivatives containing pendant aromatic structures (phe‐g‐PHPA‐g‐mPEG) were prepared by a quick heating method without using toxic organic solvent. Dynamic light‐scattering results show that the micelles are stable upon dilution under physiological conditions and the destabilization of the micelles is pH‐dependent and the phe‐g‐PHPA‐g‐mPEG polymers are biodegradable. PTX was loaded into the phe‐g‐PHPAs‐g‐mPEG micelles with encapsulation efficiency of >90%, resulting in a high drug loading content (up to 29%). PTX‐loaded micelles had a mean size around 70 nm with narrow size distribution (polydispersity index, <0.1). The PTX‐loaded micelles showed sustained drug release and obvious anticancer activity similar to Taxol against HepG2 cells, whereas blank micelles were nontoxic. The present results suggest that the thermosensitive and biodegradable phe‐g‐PHPA‐g‐mPEG micelles are a promising delivery system for the hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3917–3924     

Thermosensitive and photocleavable polyaspartamide derivatives for drug delivery

The development of novel thermo‐ and photo‐dual‐responsive biodegradable polymeric micelles based on amphiphilic polyaspartamide derivatives (NB‐g‐PHPA‐g‐mPEG) for anticancer drug delivery is reported. The obtained polymers containing hydrophobic photocleavable o‐nitrobenzyl groups exhibit thermo‐ and photosensitivity. The micelles and paclitaxel‐loaded micelles based on the thermo‐ and photo‐dual‐sensitive polymers were prepared by a quick heating method without using toxic organic solvent. The paclitaxel release from the drug‐loaded micelles can be triggered under photoirradiation. Enhancement of the anticancer activity against HeLa cells was observed for paclitaxel‐loaded NB‐g‐PHPA‐g‐mPEG micelles after light irradiation, while the empty NB‐g‐PHPA‐g‐mPEG micelles with or without irradiation did not show any toxicity. Therefore, the thermo‐ and photo‐dual‐responsive NB‐g‐PHPA‐g‐mPEG micelles have a promising future applied as a light controlled drug delivery system for anticancer drugs. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2855–2863     

Synthesis and characterization of biodegradable pH and reduction dual‐sensitive polymeric micelles for doxorubicin delivery

Novel pH and reduction dual‐sensitive biodegradable polymeric micelles for efficient intracellular delivery of anticancer drugs were prepared based on a block copolymer of methyloxy‐poly(ethylene glycol)‐b‐poly[(benzyl‐l ‐aspartate)‐co‐(N‐(3‐aminopropyl) imidazole‐l ‐aspartamide)] [mPEG‐SS‐P(BLA‐co‐APILA), MPBA] synthesized by a combination of ring‐opening polymerization and side‐chain reaction. The pH/reduction‐responsive behavior of MPBA was observed by both dynamic light scattering and UV–vis experiments. The polymeric micelles and DOX‐loaded micelles could be prepared simply by adjusting the pH of the polymer solution without the use of any organic solvents. The drug release study indicated that the DOX‐loaded micelles showed retarded drug release in phosphate‐buffered saline at pH 7.4 and a rapid release after exposure to weakly acidic or reductive environment. The empty micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. Confocal microscopy observation demonstrated that the DOX‐loaded MPBA micelles can be quickly internalized into the cells, and effectively deliver the drugs into nuclei. Thus, the pH and reduction dual‐responsive MPBA polymeric micelles are an attractive platform to achieve the fast intracellular release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1771–1780     

pH‐ and β‐cyclodextrin‐responsive micelles based on polyaspartamide derivatives as drug carrier

A novel kind of graft polymer poly(aspartic acid)‐ethanediamine‐g‐adamantane/methyloxy polyethylene glycol (Pasp‐EDA‐g‐Ad/mPEG) was designed and synthesized for drug delivery in this study. The chemical structure of the prepared polymer was confirmed by proton NMR. The obtained polymer can self‐assemble into micelles which were stable under a physiological environment and displayed pH‐ and β‐cyclodextrin (β‐CD)‐responsive behaviors because of the acid‐labile benzoic imine linkage and hydrophobic adamantine groups in the side chains of the polymer. The doxorubicin (Dox)‐loaded micelles showed a slow release under physiological conditions and a rapid release after exposure to weakly acidic or β‐CD environment. The in vitro cytotoxicity results suggested that the polymer was good at biocompatibility and could remain Dox biologically active. Hence, the Pasp‐EDA‐g‐Ad/mPEG micelles may be applied as promising controlled drug delivery system for hydrophobic antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1387–1395     

Enzyme and pH dual responsive l‐amino acid based biodegradable polymer nanocarrier for multidrug delivery to cancer cells

We report a new pH and enzyme dual responsive biodegradable polymer nanocarrier to deliver multiple anticancer drugs at the intracellular compartment in cancer cells. Natural l ‐aspartic acid was converted into multifunctional monomer and polymerized to yield new classes of biodegradable aliphatic polyester in‐build with pH responsiveness. The transformation of side chain BOC urethanes into cationic in the acidic endosomal environment disassembled the polymers nanoparticles (pH trigger‐1). The biodegradation of aliphatic polyester backbone by esterase enzyme ruptured the nanoassemblies and released the drugs in the cytoplasm (trigger‐2). The polymer scaffolds were capable of delivering multiple drugs such as doxorubicin, topotecan, and curcumin (CUR). The cytotoxicity of the nascent and drug‐loaded nanoparticles were tested in cervical (HeLa) and breast (MCF‐7) cancer cell lines. The nascent polymer nanoscaffolds were found to be nontoxic to cells whereas their drug‐loaded nanoparticles exhibited excellent killing. Confocal microscopic images revealed that the drug‐loaded polymer nanoparticles were taken up by the cells and the dual degradation process delivered the drugs to nucleus and established the proof‐of‐concept. The present investigation opens up new platform for l ‐amino acid based polyester scaffolds, for the first time, in the intracellular drug delivery in cancer treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3279–3293     

pH‐sensitive polymeric micelles based on amphiphilic polypeptide as smart drug carriers

A series of amphiphilic diblock copolymers having poly(ethylene glycol) (PEG) as one block and a polypeptide as the other block were synthesized by ring‐opening polymerization using PEG‐amine as a macroinitiator. These polymers were characterized by ¹H‐NMR and gel permeation chromatography. The influence of the substitution ratio of tertiary amine‐containing groups on the pH sensitivity of the polymers was investigated in detail. Core/shell‐structured micelles were fabricated from these polymers using an organic solvent‐free method. pH‐ and concentration‐dependent micellization behaviors were investigated by dynamic light scattering and fluorescence microscopy. Micelles loaded with doxorubicin, selected as a model drug, showed restricted drug release at physiological pH but accelerated drug release at tumor extracellular pH. Collectively, our findings suggest that these pH‐sensitive micelles might have great potential for cancer therapy applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4175–4182     

Self‐assembly of thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) micelles for drug delivery

Self‐assembled thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) (PAA‐b‐PNIPAM) micelles for entrapment and release of doxorubicin (DOX) was described. Block copolymer PAA‐b‐PNIPAM associated into core‐shell micelles in aqueous solution with collapsed PNIPAM block or protonated PAA block as the core on changing temperature or pH. Complexation of DOX with PAA‐b‐PNIPAM triggered by the electrostatic interaction and release of DOX from the complexes due to the changing of pH or temperature were studied. Complex micelles incorporated with DOX exhibited pH‐responsive and thermoresponsive drug release profile. The release of DOX from micelles was suppressed at pH 7.2 and accelerated at pH 4.0 due to the protonation of carboxyl groups. Furthermore, the cumulative release of DOX from complex micelles was enhanced around LCST ascribed to the structure deformation of the micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5028–5035, 2008     

Synthesis and characterization of biodegradable amphiphilic ABC Y‐shaped miktoarm terpolymer by click chemistry for drug delivery

Biodegradable amphiphilic ABC Y‐shaped triblock copolymer (MPBC) containing PEG, PBLA, and PCL segments was synthesized via the combination of enzymatic ring‐opening polymerization (ROP) of epsilon‐caprolactone, ROP of BLA‐N‐carboxyanhydride and click chemistry, where PEG, PBLA, and PCL are poly(ethylene glycol), poly(benzyl‐l ‐aspartate), and polycaprolactone, respectively. Propynylamine was employed as ROP initiator for the preparation of alkynyl‐terminated PBLA and methyloxy‐PEG with hydroxyl and azide groups at the chain‐end was used as enzymatic ROP initiator for synthesis of monoazido‐midfunctionalized block copolymer mPEG‐b‐PCL. The subsequent click reaction led to the formation of Y‐shaped asymmetric heteroarm terpolymer MPBC. The polymer structures were characterized by different analyses. The MPBC terpolymer self‐assembled into micelles and physically encapsulated drug doxorubicin (DOX) to form DOX‐loaded micelles, which showed good stability and slow drug release. In vitro cytotoxicity study indicated that the MPBC micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3346–3355     

Facile Fabrication of Thermo‐Responsive and Reduction‐Sensitive Polymeric Micelles for Anticancer Drug Delivery

The development of thermo‐responsive and reduction‐sensitive polymeric micelles based on an amphiphilic block copolymer poly[(PEG‐MEMA)‐co‐(Boc‐Cyst‐MMAm)]‐block‐PEG (denoted PEG‐P‐SS‐HP) for the intracellular delivery of anticancer drugs is reported. PTX, as model drug, was loaded into the PEG‐P‐SS‐HP micelles with an encapsulation efficiency >90%, resulting in a high drug loading content (up to 35 wt%). The PTX‐loaded PEG‐P‐SS‐HP micelles show slow drug release in PBS and rapid release after incubation with DTT. The PTX‐loaded micelles display a better cytotoxic effect than the free drug, whereas empty micelles are found to be non‐toxic. The thermo‐responsive and reduction‐sensitive polymeric micelles described may serve as promising carriers for cytostatic drugs.

     

Amphiphilic Block‐Graft Copolymers Poly(ethylene glycol)‐b‐(polycarbonates‐g‐palmitate) Prepared via the Combination of Ring‐Opening Polymerization and Click Chemistry

Amphiphilic block‐graft copolymers mPEG‐b‐P(DTC‐ADTC‐g‐Pal) were synthesized by ring‐opening polymerization of 2,2‐dimethyltrimethylene carbonate (DTC) and 2,2‐bis(azidomethyl)trimethylene carbonate (ADTC) with poly(ethylene glycol) monomethyl ether (mPEG) as an initiator, followed by the click reaction of propargyl palmitate and the pendant azido groups on the polymer chains. Stable micelle solutions of the amphiphilic block‐graft copolymers could be prepared by adding water to a THF solution of the polymer followed by the removal of the organic solvent by dialysis. Dynamic light scattering measurements showed that the micelles had a narrow size distribution. Transmission electron microscopy images displayed that the micelles were in spherical shape. The grafted structure could enhance the interaction of polymer chains with drug molecules and improve the drug‐loading capacity and entrapment efficiency. Further, the amphiphilic block‐graft copolymers mPEG‐b‐P(DTC‐ADTC‐g‐Pal) were low cytotoxic and had more sustained drug release behavior. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Bioreducible and core‐crosslinked hybrid micelles from trimethoxysilyl‐ended poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide) block copolymers: Thiol‐ene click synthesis and properties

Bioreducible and core‐crosslinked hybrid micelles were for the first time fabricated from biodegradable and biocompatible trimethoxysilyl‐terminated and disulfide‐bond‐linked block copolymers poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide), which were prepared by combining thiol‐ene coupling reaction and ring‐opening polymerization. The molecular structures, physicochemical, self‐assembly, and bioreducible properties of these copolymers were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, dynamic light scattering (DLS), and transmission electron microscopy. The core‐crosslinking sol‐gel reaction was confirmed by ¹H NMR, and the core‐crosslinked hybrid micelles contained about 3 wt % of silica. The bioreducible property of both uncrosslinked and core‐crosslinked micelles in 10 mM 1,4‐dithiothreitol (DTT) solution was monitored by DLS, which demonstrated that the PEO corona gradually shedded from the PCL core. The anticancer doxorubicin drug‐loaded micelles showed nearly spherical morphology compared with blank micelles, presenting a DTT reduction‐triggered drug‐release profile at 37 °C. Notably, the core‐crosslinked hybrid micelles showed about twofold drug loading capacities and a half drug‐release rate compared with the uncross‐liked counterparts. This work provides a useful platform for the fabrication of bioreducible and core‐crosslinked hybrid micelles potential for anticancer drug delivery system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

pH‐sensitive carbon quantum dots−doxorubicin nanoparticles for tumor cellular targeted drug delivery

A kind of pH‐responsive carbon quantum dots?doxorubicin nanoparticles drug delivery platform (D‐Biotin/DOX‐loaded mPEG‐OAL/N‐CQDs) was designed and synthesized. The system consists of fluorescent carbon dots as cross‐linkers, and D‐Biotin worked as targeting groups, which made the system have a pH correspondence, doxorubicin hydrochloride (DOX) as the target drug, oxidized sodium alginate (OAL) as carrier materials. Ultraviolet (UV)‐Vis spectrum showed that the drug‐loading rate of DOX is 10.5%, and the drug release in vitro suggested that the system had a pH response and tumor cellular targeted, the drug release rate is 65.6% at the value of pH is 5.0, which is much higher than that at the value of pH is 7.4. The cytotoxicity test and laser confocal fluorescence imaging showed that the synthesized drug delivery system has high cytotoxicity to cancer cells, and the drug‐loaded nanoparticles could enter the cells through endocytosis.     

Hyperbranched Polycarbonate‐Based Multimolecular Micelle with Enhanced Stability and Loading Efficiency

We herein develop a facile catalyst‐free method to prepare hyperbranched hydroxyl‐enriched aliphatic polycarbonate according to SCROP strategy. PEG‐attached multiarm hyperbranched copolymer HEHDO‐star‐mPEG was further designed. It was found that HEHDO‐star‐mPEG can self‐assemble into supramolecular multimolecular micelles in water. HEHDO‐star‐mPEG micelle showed excellent stability with respect to micellar size upon dilution, and displayed good cell‐biocompatibility. An anticancer drug of doxorubicin with hydrogen‐bonding functionality was incorporated into obtained micelles to establish a drug delivery system model. A high drug‐loading content as well as sustained release pattern for HEHDO‐star‐mPEG based delivery system was achieved.

     

Lactic acid‐ and carbonate‐based crosslinked polymeric micelles for drug delivery

Our objective was to synthesize and evaluate lactic acid‐ and carbonate‐based biodegradable core‐ and core‐corona crosslinkable copolymers for anticancer drug delivery. Methoxy poly(ethylene glycol)‐b‐poly(carbonate‐co‐lactide‐co‐5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxane‐2‐one) [mPEG‐b‐P(CB‐co‐LA‐co‐MAC)] and methoxy poly(ethylene glycol)‐b‐poly(acryloyl carbonate)‐b‐poly(carbonate‐co‐lactide) [mPEG‐b‐PMAC‐b‐P(CB‐co‐LA)] copolymers were synthesized by ring‐opening polymerization of LA, CB, and MAC using mPEG as an macroinitiator and 1,8‐diazabicycloundec‐7‐ene as a catalyst. These amphiphilic copolymers which exhibited low polydispersity and critical micelle concentration values (0.8–1 mg/L) were used to prepare micelles with or without drug and stabilized by crosslinking via radical polymerization of double bonds introduced in the core and interface to improve stability. mPEG₁₁₄‐b‐P(CB₈‐co‐LA₃₅‐co‐MAC_2.5) had a higher drug encapsulation efficiency (78.72% ± 0.15%) compared to mPEG₁₁₄‐b‐PMAC_2.5‐b‐P(CB₉‐co‐LA₃₉) (20.29% ± 0.11%).¹H NMR and IR spectroscopy confirmed successful crosslinking (～70%) while light scattering and transmission electron microscopy were used to determine micelle size and morphology. Crosslinked micelles demonstrated enhanced stability against extensive dilution with aqueous solvents and in the presence of physiological simulating serum concentration. Furthermore, bicalutamide‐loaded crosslinked micelles were more potent compared to non‐crosslinked micelles in inhibiting LNCaP cell proliferation irrespective of polymer type. Finally, these results suggest crosslinked micelles to be promising drug delivery vehicles for chemotherapy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cancer‐associated pH‐responsive tetracopolymeric micelles composed of poly(ethylene glycol)‐b‐poly(L‐histidine)‐b‐poly(L‐lactic acid)‐b‐poly(ethylene glycol)

To create a novel vector for specifically delivering anticancer therapy to solid tumors, we used diafiltration to synthesize pH‐sensitive polymeric micelles. The micelles, formed from a tetrablock copolymer [poly(ethylene glycol)‐b‐poly(L ‐histidine)‐b‐poly(L ‐lactic acid)‐b‐poly(ethylene glycol)] consisted of a hydrophobic poly(L ‐histidine) (polyHis) and poly(L ‐lactic acid) (PLA) core and a hydrophilic poly(ethylene glycol) (PEG) shell, in which we encapsulated the model anticancer drug doxorubicin (DOX). The robust micelles exhibited a critical micellar concentration (CMC) of 2.1–3.5 µg/ml and an average size of 65–80 nm pH 7.4. Importantly, they showed a pH‐dependent micellar destabilization, due to the concurrent ionization of the polyHis and the rigidity of the PLA in the micellar core. In particular, the molecular weight of PLA block affected the ionization of the micellar core. Depending on the molecular weight of the PLA block, the micelles triggering released DOX at pH 6.8 (i.e. cancer acidic pH) or pH 6.4 (i.e. endosomal pH), making this system a useful tool for specifically treating solid cancers or delivering cytoplasmic cargo in vivo. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s through proton‐transfer polymerization

Stimuli‐responsive hyperbranched polymers have attracted great attention in recent years because of their wide applications in biomedicine. Through proton‐transfer polymerization of triethanolamine and 1,2,7,8‐diepoxyoctane with the help of potassium hydride, a series of novel backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s were prepared successfully in one‐pot. The degrees of branching of the resulting polymers were at 0.40–0.49. Turbidity measurements revealed that hyperbranched poly(amine‐ether)s exhibited thermo and pH dual‐responsive properties in water. Importantly, these responsivities could be readily adjusted by changing the polymer composition as well as the polymer concentration in aqueous solution. Moreover, in vitro evaluation demonstrated that hyperbranched poly(amine‐ether)s showed low cytotoxicity and efficient cell internalization against NIH 3T3 cell lines. These results suggest that these backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s are promising materials for biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Gas‐forming poly(ethylene glycol)‐b‐poly(L‐lactic acid) micelles

In this study, a novel drug‐carrying micelle composed of methoxy poly(ethylene glycol) (mPEG)‐b‐poly(L‐lactic acid) (PLLA) with gas‐forming carbonate linkage was fabricated. Here, the gas‐forming carbonate linkage was formed by the chemical coupling of the terminal hydroxyl group of the PLLA block and benzyl chloroformate (BC). mPEG‐b‐PLLA‐BC was self‐organized in aqueous solution: the PEG block on the hydrophilic outer shell and the PLLA‐BC block in the hydrophoboic innor core. The cleavage of carbonate linkage by hydrolysis and formation of carbon dioxide nanobubbles in the micellar core enabled an accelerated release of the encapsulated anticancer drug (doxorubicin: DOX) from the mPEG‐b‐PLLA‐BC micelles. The amount of drug (DOX) released from the mPEG‐b‐PLLA‐BC micelle was higher than that from the conventional mPEG‐b‐PLLA micelle, which allowed for increased in vitro toxicity against KB tumor cells. Copyright © 2013 John Wiley & Sons, Ltd.     

Light and pH dual‐sensitive biodegradable polymeric nanoparticles for controlled release of cargos

In this article, a light and pH dual‐sensitive block copolymer PEG‐b‐poly(MPC‐Azo/DEA) was facilely prepared for the first time by azide‐alkyne click chemistry between amphiphilic block copolymer bearing pendant alkynyl group poly(ethylene glycol)‐poly(5‐methyl‐5‐propargylxycarbonyl‐1,3‐dioxane‐2‐one) (PEG‐b‐poly(MPC)) and two azide‐containing compounds azobenzene derivative (Azo‐N₃) and 2‐azido‐1‐ethyl‐diethylamine (DEA‐N₃). Light response of the polymeric nanoparticles benefits from the azobenzene segments and pH responsiveness is attributed to DEA moieties. The prepared copolymer could self‐assemble into spherical micelle particles. The morphological changes of these particles in response to dual stimuli were investigated by UV/vis spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM). Nile Red (NR) was utilized as probe, and fluorescence spectroscopy was served as an evidence for the enhanced release of cargos from polymeric nanoparticles under combined stimulation. Anticancer drug, DOX was loaded into the nanoparticles and the loaded‐DOX could be released from these nanoparticles under dual stimuli. MTT assays further demonstrated that PEG‐b‐poly(MPC) and PEG‐b‐poly(MPC‐Azo/DEA) were of biocompatibility and low toxicity against HepG2 cells as well as SMCC‐7721 cells. More importantly, the prepared DOX‐loaded nanoparticles exhibited good anticancer ability for the two cells. The synthesized light and pH dual‐sensitive biodegradable polymeric nanoparticles were expected to be platforms for precisely controlled release of encapsulated molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1773–1783     

Reduction and pH dual‐responsive block copolymers containing pendent p‐nitrobenzyl carbamate functionalities: Synthesis and self‐assembly behavior

We report on the preparation of reduction‐responsive amphiphilic block copolymers containing pendent p‐nitrobenzyl carbamate (pNBC)‐caged primary amine moieties by reversible addition–fragmentation chain transfer (RAFT) radical polymerization using a poly(ethylene glycol)‐based macro‐RAFT agent. The block copolymers self‐assembled to form micelles or vesicles in water, depending on the length of hydrophobic block. Triggered by a chemical reductant, sodium dithionite, the pNBC moieties decomposed through a cascade 1,6‐elimination and decarboxylation reactions to liberate primary amine groups of the linkages, resulting in the disruption of the assemblies. The reduction sensitivity of assemblies was affected by the length of hydrophobic block and the structure of amino acid‐derived linkers. Using hydrophobic dye Nile red (NR) as a model drug, the polymeric assemblies were used as nanocarriers to evaluate the potential for drug delivery. The NR‐loaded nanoparticles demonstrated a reduction‐triggered release profile. Moreover, the liberation of amine groups converted the reduction‐responsive polymer into a pH‐sensitive polymer with which an accelerated release of NR was observed by simultaneous application of reduction and pH triggers. It is expected that these reduction‐responsive block copolymers can offer a new platform for intracellular drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1333–1343     

pH and reduction dual‐stimuli‐responsive PEGDA/PAMAM injectable network hydrogels via aza‐michael addition for anticancer drug delivery

A pH and reduction dual‐stimuli‐responsive PEGDA/PAMAM injectable network hydrogel containing “acetals” as pH‐sensitive groups and “disulfides” as reducible linkages was designed and synthesized via aza‐Michael addition reaction between PAMAM and PEGDA diacrylates. The pore size and swelling ratio of hydrogels was varied from 14 ± 3 to 19 ± 4 μm and 214 ± 13 to 300 ± 19 μm, respectively, with varying ethylene glycol repeating units in diacrylates. The swelling ratio of PEGDA/PAMAM network hydrogel increased with increase in the molecular weight of PEG and with decrease in pH. The presence of different cationizable amino‐functionalities in PEGDA/PAMAM network hydrogel helped to enhance the swelling ability of hydrogel under the acidic conditions. The continuous increase in metabolically active live HeLa cells with time in MTT assay implied biocompatibility/noncytotoxicity of the synthesized PEGDA/PAMAM injectable network hydrogel. Furthermore, the prepared PEGDA/PAMAM hydrogel showed higher degradation at lower pH and at higher concentration of DTT. The burst release of doxorubicin from PEGDA/PAMAM hydrogel under the environment of the lower pH and in presence of DTT compared to the release at normal physiological pH and in absence of DTT suggested the potential ability of this model hydrogel system for targeted and selective anticancer drug release at tumor tissues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2080–2095