One‐component,double‐chromophoric thioxanthone photoinitiators for free radical polymerization

Two one‐component, double‐chromophoric thioxanthone photoinitiators, namely TX‐EDA and TX‐DETA were synthesized by the reaction of thioxanthone aldehyde (TX‐A) with ethylenediamine (EDA) and diethylenetriamine (DETA), respectively via a facile Schiff base reaction. Both photoinitiators were characterized by spectral analysis and photobleaching studies. DFT calculations are employed to reveal the contribution of the different orbitals to the excitation of the initiators. The double‐chromophoric nature of the initiators gives rise to an increased absorption in the near UV region when compared with the pristine TX‐A. Photoinitiated polymerization of various vinyl monomers with TX‐EDA and TX‐DETA has been investigated in the presence and absence of a co‐initiator and compared for formulations consisting of precursor TX‐A. In addition, real‐time FTIR spectroscopic studies were performed in methyl methacrylate polymerization with both initiators. The higher efficiency observed with TX‐DETA may be attributed to the additional hydrogen donating sites adjacent to nitrogen atoms. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3475–3482     

A thioxanthone‐based visible photoinitiator

Thioxanthone‐based 9‐(2‐Morpholine‐4yl‐acetyl)‐5‐thia‐napthasen‐12‐one (TX‐MPM) was synthesized and characterized as a one‐component novel visible photoinitiator. Its capability to act as an initiator for the polymerization of methyl methacrylate (MMA) was examined in photoreactor and also daylight. Photophysical properties: fluorescence and phosphorescence emission spectra and fluorescence quantum yield of TX‐MPM (?_f = 0.29) were determined. The phosphorescence lifetime was found 131 ms for TX‐MPM and 110 ms for initiator‐attached polymer (PMMA) at 77 K, indicated a π→π* nature of the lowest triplet state. A model compound, morpholino acetonapthone was used as quencher for the triplet states of TX‐MPM and the quenching rate constant was determined (k_q = 1.26 × 10⁹ M^?1s^?1). According to laser flash photolysis studies, intermolecular hydrogen abstraction process was more dominant path to the formation of the initiating radicals. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and photopolymerization of piperonylamine derivatives as a polymerizable cyclic acetals co‐initiator for light‐cured unfilled dental resins

The aim of this study was to synthesize and characterize N,N‐di(methacryly‐ethoxycarbonyl‐ethyl)‐N‐(1,3‐benzodioxole‐ 5‐methylene)(DMEBM) to replace both triethylene glycol dimethylacrylate(TEGDMA) as a dilute and the non‐polymerizable amine, which is added as a co‐initiator in dental resin mixtures. 2,2‐bis[4‐(2‐Hydroxy‐3‐methacryloxypropoxy) phenyl]‐propane (Bis‐GMA) and camphorquinone (CQ) were used as monomer and photoinitiator in these model dental resin systems, in contrast to ethyl 4‐dimethylaminobenzoate (EDMAB) which was usually used as a co‐initiator. DMEBM was synthesized via Michael‐Addition reaction and characterized using ¹H NMR spectroscopy. A mixture of Bis‐GMA/DMEBM/CQ was found to reach the double bond conversion of 67.5%, slightly higher than that of Bis‐GMA/TEGDMA/CQ/EDMAB (66.8%) and Bis‐GMA/TEGDMA/CQ/DMEBM (64.8%). In addition, the glass transition temperature of Bis‐GMA/TEGDMA/CQ/EDMAB (93.4°C) were higher than that of Bis‐GMA/TEGDMA/CQ/DMEBM (89.3 °C) and Bis‐GMA/DMEBM/CQ (80.4°C). The water sorption and solubility of Bis‐GMA/TEGDMA/CQ/DMEBM were higher than that of Bis‐GMA/TEGDMA/CQ/EDMAB and Bis‐GMA/DMEBM/CQ. However, the values were still within the range of the ISO 4049 standards. DMEBM could be used as a potential co‐initiator and diluent for dental composite. Copyright © 2009 John Wiley & Sons, Ltd.     

Thioxanthone–anthracene‐9‐carboxylic acid as radical photoinitiator in the presence of atmospheric air

Thioxanthone–anthracene‐9‐carboxylic acid (TX‐ANCA) namely 14‐oxo‐14H‐naphthol [2,3‐b]thioxanten‐12‐carboxylic acid, is synthesized and characterized as part of our continuing interest for syntheses of polyaromatic initiators. Photoinitiator, TX‐ANCA have good absorption properties in the UV and visible region of the electromagnetic spectrum (ɛ₃₇₀: 9080 M⁻¹cm⁻¹, ɛ₄₃₀: 6151 M⁻¹ cm⁻¹). The fluorescence quantum yield is calculated as 0.1 which is slightly higher than of the parent thioxanthone compound (φ_f: 0.07). The phosphorescence lifetime is found to be 39 ms. The possible initiating mechanism of TX‐ANCA is based on photoexcitation of TX‐ANCA and quenching of triplet excited states of TX‐ANCA by molecular oxygen generates singlet oxygen. Singlet oxygen reacts with the anthracene moiety of TX‐ANCA possibly forms an endoperoxide. The endoperoxides undergoes photochemical or thermal decomposition to form radicals which are able to initiate free radical polymerization. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1878–1883     

Thioxanthone–carbazole as a visible light photoinitiator for free radical polymerization

A thioxanthone (TX) derivative with the additional carbazole chromophore, namely thioxanthone‐carbazole (TX‐C) was synthesized and characterized. The photophysical properties and its efficiency to polymerize methyl methacrylate both in the presence and absence of N,N‐dimethylaniline (DMA) as coinitiator was investigated and compared with that of the commercially available TX. TX‐C was found to display better photophysical properties and in both cases initiate polymerization more efficiently. Detailed real‐time Fourier transform infrared studies revealed that high polymerization rates can be obtained when TX‐C in conjunction with DMA was used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Hydrogen‐transfer polymerization of vinyl monomers derived from 4‐methylbenzoyl isocyanate and acrylamide derivatives

The anionic polymerization of N‐acryloyl‐N′‐(4‐methylbenzoyl)urea (1) was carried out at 80°C for 24 h in DMF, DMSO, acetonitrile, or toluene by t‐BuOK or DBU (3 mol %) as an initiator to obtain polymer 3 in a good yield. The structure of 3 was dependent upon the initiator used, in which t‐BuOK selectively conducted the hydrogen‐transfer polymerization, while DBU partially induced the vinyl polymerization (16–20%). Likewise, N‐acryloyl‐N‐methyl‐N′‐(4‐methylbenzoyl)urea (2, i.e., an N‐methylated derivative of 1) was subjected to the hydrogen‐transfer polymerization. Although the yield of the polymer was lower in comparison with 1, the structure of the obtained polymer 4 was similarly governed by the initiator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 465–472, 1999     

One‐component thioxanthone‐based polymeric photoinitiators

The photochemical and photophysical properties of new polymeric photoinitiators (PPIs) containing pendant thioxanthone (TX) and amine moieties are studied. The PPIs are synthesized by copolymerization of tert‐butyl 2‐((9‐oxo‐9H‐thioxanthen‐2‐yloxy)methyl)acrylate (TX1) with N,N‐dimethylaminoethyl methacrylate (DMAEM) at two different ratios using free radical polymerization. UV–vis spectra indicate that PPIs possess similar absorption characteristics to TX1 in the violet range (～400 nm; absorption red‐shift 20 nm). The photochemical mechanisms are studied by electron spin resonance (ESR), steady state photolysis, laser flash photolysis, and cyclic voltammetry. ESR studies indicate formation of two different aminoalkyl radicals on the hydrogen donor amine. The triplet state of the PPIs is short‐lived compared to isopropyl thioxanthone and TX1, due to the built‐in amine functionality. Photopolymerization of trimethylolpropane triacrylate (TMPTA) initiated by these photoinitiators under LED exposure at 385 and 405 nm using real‐time FTIR spectroscopy shows that they exhibit higher efficiency than TX/N‐methyldiethanolamine (MDEA) and TX1/MDEA systems with the advantage of a much higher molecular weight that can be very helpful to overcome migration issues. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3370–3378     

Acrylonitrile‐containing polymers via a combination of metal‐catalyzed living radical and nitroxide‐mediated free‐radical polymerization routes

2‐Phenyl‐2‐[(2,2,6,6‐tetramethylpiperidino)oxy] ethyl 2‐bromopropanoate was successfully used as an initiator in consecutive living radical polymerization routes, such as metal‐catalyzed living radical polymerization and nitroxide‐mediated free‐radical polymerization, to produce various types of acrylonitrile‐containing polymers, such as styrene–acrylonitrile, polystyrene‐b‐styrene–acrylonitrile, polystyrene‐b‐poly(n‐butyl acrylate)‐b‐polyacrylonitrile, and polystyrene‐b‐polyacrylonitrile. The kinetic data were obtained for the metal‐catalyzed living radical polymerization of styrene–acrylonitrile. All the obtained polymers were characterized with ¹H NMR, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3374–3381, 2006     

Synthesis and characterization of star polymers initiated by hexafunctional discotic initiator through atom transfer radical polymerization

A novel hexafunctional discotic initiator, 2,3,6,7,11,12‐hexakis(2‐bromobutyryloxy)triphenylene (HBTP), was synthesized by the esterification of 2,3,6,7,11,12‐hexahydroxytriphenylene with 2‐bromobutyryl chloride. Atom transfer radical polymerizations of styrene, methyl acrylate, and n‐butyl acrylate were carried out in 50 vol % tetrahydrofuran with HBTP/copper(I) bromide/2,2′‐bipyridyl as an initiation system. The polymers produced had well‐controlled molecular weights and narrow molecular weight distributions (<1.2). On the basis of ¹H NMR spectra of the star polymer and its hydrolyzed products, we can conclude that the initiator quantitatively initiated the polymerization of vinyl monomers and that a star polymer with a discotic core was obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2233–2243, 2001     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Synthesis of comb‐like polystyrene with poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as macroinitiator

The copolymerization of N‐phenyl maleimide and p‐chloromethyl styrene via reversible addition–fragmentation chain transfer (RAFT) process with AIBN as initiator and 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as RAFT agent produced copolymers with alternating structure, controlled molecular weights, and narrow molecular weight distributions. Using poly(N‐phenyl maleimide‐alt‐p‐chloromethyl styrene) as the macroinitiator for atom transfer radical polymerization of styrene in the presence of CuCl/2,2′‐bipyridine, well‐defined comb‐like polymers with one graft chain for every two monomer units of backbone polymer were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2069–2075, 2006     

Homopolymerization of methyl methacrylate and styrene: Determination of the chain‐transfer constant from the Mayo equation and the number distribution for n‐dodecanethiol

Chain‐transfer constants were evaluated for n‐dodecanethiol in the homopolymerization of styrene (S) and methyl methacrylate (MMA). The polymerizations were carried out in benzene at 50 °C with different amounts of 2,2′‐azobisisobutyronitrile as the initiator. The new chain length distribution (CLD) analytical method was used and compared to the traditional Mayo method. The chain‐transfer‐constant values were independent of the initiator concentration and slightly higher (by a factor of 1.1 for MMA and 1.2 for S) when obtained according to the CLD method compared to the Mayo method. The chain‐transfer constant for S was 20 times higher than for MMA. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 170–178, 2000     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

Computational study of alkyllithium/pyridine derivative systems as initiators for the living anionic polymerization of methyl methacrylates

The reactivity of n‐butyllithium (n‐BuLi) toward pyridine derivatives (pyridine, pyridazine, pyrimidine, and 1,3,5‐triazine) was subjected to a computational study to determine the most suitable n‐BuLi/heterocyclic ring system as an initiator for the anionic polymerization of methyl methacrylate (MMA). These systems were suggested to prevent side reactions occurring through n‐BuLi attack on the carbonyl carbon of MMA by sterically blocking the initiator. The initiation reaction was modeled with the B3LYP methodology 6‐31+G*. Activation barriers were used to analyze the reactivity of each n‐BuLi/heterocyclic ring system. Computational results showed that n‐BuLi/triazine had a significantly lower activation barrier. Therefore, n‐BuLi/triazine was the suggested initiator system for the anionic polymerization of poly(methyl methacrylate). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 455–467, 2005     

Surface modification of multiwalled carbon nanotubes via nitroxide‐mediated radical polymerization

The nitroxide‐mediated radical polymerization of styrene was carried out on the surfaces of multiwalled carbon nanotubes (MWNTs) initiated by an MWNT‐supported initiator multiwalled carbon nanotube–2″,2″,6″,6″‐tetramethylpiperidinyloxy (MWNT–Tempo). The content of polystyrene grafted from the surface was controlled by changes in the polymerization conditions, such as the reaction times or the ratios of monomers to initiators. The obtained polystyrene‐grafted multiwalled carbon nanotubes (MWNT–PSs) were further used to initiate the polymerization of 4‐vinylpyridine to get polystyrene‐b‐poly(4‐vinylpyridine)‐grafted multiwalled carbon nanotubes (MWNT–PS‐b‐P4VPs). In contrast to unmodified MWNTs, MWNT–PSs had relatively good dispersibility in various organic solvents, such as tetrahydrofuran, CHCL₃, and o‐dichlorobenzene. The structures and properties of MWNT–PSs and MWNT–PS‐b‐P4VPs were characterized and studied with several methods, including thermogravimetric analysis, Fourier transform infrared, ultraviolet–visible, and transmission electron microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4656–4667, 2006     

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles by dispersion polymerization

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles were prepared by dispersion polymerization in toluene/2‐methylpropan‐1‐ol medium using cellulose acetate butyrate and dibenzoyl peroxide (BPO) as a steric stabilizer and initiator, respectively. The particle size was reduced with decreasing solvency of the reaction medium (more nuclei were generated) because the critical chain length of the precipitated oligomers decreased with an increasing toluene content, which is a poorer solvent for the polymer than 2‐methylpropan‐1‐ol. There is an optimum initiator concentration (2 wt % BPO relative to monomers) for producing low‐polydispersity particles under given conditions. Additionally, discrete spherical particles were obtained at a low monomer concentration and/or higher polymerization temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1625–1632, 2002     

Synthesis of well‐defined naphthalene and photo‐labile group‐labeled polystyrene via ATRP

The atom transfer radical polymerizations of styrene were successfully carried out in bulk and solution, respectively, at 115 °C, with a novel photoiniferter reagent, (1‐naphthyl)methyl N,N‐diethyldithiocarbamate (NMDC), as an initiator in the presence of copper (I) bromide and N,N,N′,N″,N″‐pentamethyldiethylenetriamine. The results showed that NMDC was an effective initiator with high initiation efficiency for ATRP of St. The polymerization rate was first‐order with respect to the monomer concentration and the molecular weights of the obtained polystyrene (PS) increased linearly with the monomer conversion, with very narrow molecular weight distributions (M_w/M_n = 1.07–1.29). The functionalized naphthalene‐labeled PS bearing N,N‐(diethylamino)dithiocarbamoyl group which was confirmed by ¹H NMR analysis, and chain extension of the PS exhibited fluorescence and ultraviolet absorption in chloroform (CHCl₃). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 510–518, 2006     

New acid/base salts as co‐catalysts for the organocatalyzed ring opening polymerization of lactide

(R)‐(+)‐binaphathyl‐diyl hydrogen phosphate (BNPH)/ diazabicyclo[5.4.0]undec‐7‐ene (DBU) and (1R)‐(?)?10‐camphorsulfonic acid (CSA)/4‐dimethylaminopyridine (DMAP) acid–base salts were synthesized and assessed for the ring‐opening polymerization of rac‐lactide. They were found to be inactive toward the polymerization in the presence of a protic initiator. When used in combination with a base such as DBU or DMAP and a protic initiator, these acid/base conjugates led to well‐controlled polymerization in mild conditions (D_M < 1.1 in all cases). With DBU, the presence of the salt was found to lead to narrower molecular weight distributions than those obtained using the base alone, and to prevent undesirable transesterification reactions occurring at the end of the reaction. An increase in activity was observed using the salts in combination with DMAP as compared with DMAP alone, together with an improvement of the control over the molecular weight. The results were discussed on the basis of ¹H nuclear magnetic resonance analyzes including acid/base equilibria involving the use of two different bases. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 659–664     

Synthesis of poly(chitosan‐N‐isopropylacrylamide) complex particles with the method of soapless dispersion polymerization

Crosslinked poly(chitosan‐N‐isopropylacrylamide) [poly(NIPAAM‐chitosan)] complex particles were successfully synthesized with the method of soapless dispersion polymerization. The anionic initiator ammonium persulfate (APS) and the cationic initiator 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride (AIBA) were used to initiate the copolymerization. The poly(NIPAAM‐chitosan) copolymer particles synthesized with APS as the initiator had a homogeneous morphology, whereas the copolymer particles synthesized with AIBA as the initiator showed a core–shell morphology. In addition, various variables such as the particle size, reaction rate, and ζ potential were taken into account. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2053–2063, 2003