Systematic Investigation of the Photopolymerization of Imidazolium-Based Ionic Liquid Styrene and Vinyl Monomers

The use of ionic liquids (ILs) as media in radical polymerizations has demonstrated the ability of these unique solvents to improve both reaction kinetics and polymer product properties. However, the bulk of these studies have examined the polymerization behavior of common organic monomers (e.g., methyl methacrylate, styrene) dissolved in conventional ILs. There is increasing interest in polymerized ILs (poly(ILs)), which are ionomers produced from the direct polymerization of styrene-, vinyl-, and acrylate-functionalized ILs. Here, the photopolymerization kinetics of IL monomers are investigated for systems in which styrene or vinyl functionalities are pendant from the imidazolium cation. Styrene-functionalized IL monomers typically polymerized rapidly (full conversion ≤1 min) in both neat compositions or when diluted with a nonpolymerizable IL, [C₂mim][Tf₂N]. However, monomer conversion in vinyl-functionalized IL monomers is much more dependent on the nature of the nonpolymerizable group. ATR-FTIR analysis and molecular simulations of these monomers and monomer mixtures identified the presence of multiple intermolecular interactions (e.g., π–π stacking, IL aggregation) that contribute to the polymerization behaviors of these systems. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2364–2375     

Photopolymerization of poly(ethylene glycol) dimethacrylates: The influence of ionic liquids on the formulation and the properties of the resultant polymer materials

The photo‐initiated polymerization of poly(ethylene glycol)dimethacrylates [PEGDM(n)] in the presence of various ionic liquids (ILs) is reported. The influence of ILs concentrations as well as of their nature upon the photopolymerization kinetics was studied in detail. It was found that according to reactive ability in bulk and in solution photopolymerization, the investigated monomers can be divided into two groups: PEGDM(1)–PEGDM(2)–PEGDM(3) and PEGDM(4)–PEGDM(7‐8). ILs slightly influence the photopolymerization of monomers from the first group and greatly change kinetics of those from the second. Such behavior was explained by the theory of “kinetically favorable or unfavorable monomer associations.” It was demonstrated that certain ILs accelerate the photopolymerization of the highest PEGDMs and offer access to the polymers derived from low reactive monomers. Relying on the obtained data, the attempt to predict the structure of the “best” ionic additive for the given monomer photopolymerization was performed and proved. Finally, the influence of both residual and specially added ILs quantities upon the properties of obtained polymer materials was investigated. It was revealed that ILs can physically interact with polymer networks increasing their thermal stability, plasticizing films, and blocks, imparting ionic conductivity equal up to 3.62 × 10^?3 Sm/cm at 25 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2388–2409, 2010     

Dibenzophenazine derivatives as visible photosensitizers for diaryliodonium salts

The use of two dibenzo[a,c]phenazine derivatives, 10,13‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine and 10,13‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine are reported as photosensitizers for diaryliodonium salt photoinitiators. Novel dyes based on the dibenzo[a,c]phenazine skeleton are shown to be efficient in carrying out the cationic photopolymerizations. Representative examples of different types of monomers including epoxide, and vinyl monomers are polymerized in the presence of the photosensitizers and diphenyliodonium hexafluorophosphate (Ph₂I⁺PF). Polymerizations are initiated at room temperature using long wavelength UV and visible light, and monitored by optical pyrometry. The photopolymerization of an epoxide monomer via solar irradiation is also demonstrated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Diphenylphenacyl sulfonium salt as dual photoinitiator for free radical and cationic polymerizations

Diphenylphenacylsulfonium tetrafluoroborate (DPPS⁺BF^4–) salt possessing both phenacyl and sulfonium structural units was synthesized and characterized. DPPS⁺BF^4– absorbs light at relatively higher wavelengths. The direct and sensitized initiation activity of the salt in both cationic and free radical photopolymerizations was investigated and compared with that of its analogue triphenylsulfonium tetrafluoroborate (TPS⁺BF^4–). Differential scanning photocalorimetry and conventional gravimetric studies revealed that DPPS⁺BF^4– showed higher efficiency for direct and sensitized photopolymerizations of most of the monomers investigated. Although, principally both homolytic and/or heterolytic cleavage is possible, theoretical studies suggested that homolytic pathway is more favored for the generation of reactive initiating species. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 451–457     

Poly(ether sulfone)s using a rigid dibenzothiophene dioxide heterocycle

Poly(aryl ether)s were prepared by nucleophilic aromatic substitution using conformationally restricted dichloro‐ and difluorodibenzothiophene dioxide heterocyclic monomers with bisphenol A or bisphenol AF. The heterocyclic monomers were prepared from the bis(4‐halophenyl) sulfones in two steps via lithiation followed by copper catalyzed intramolecular coupling and characterized by ¹H, ¹³C, ¹⁹F NMR spectroscopy and GC/MS. Reactivity of the fluorine containing monomer was examined using semi‐empirical methods and NMR spectroscopy measurements and found to be potentially more reactive than bis(4‐fluorophenyl) sulfone, even with a conformationally locked sulfone as the electron withdrawing group. Successful polymerizations of both the fluorine and chlorine containing monomers with bisphenol A and bisphenol AF nucleophiles were accomplished, providing polymers with number average molecular weights of approximately 45 kg/mol (difluoro monomer) and 10–20 kg/mol (dichloro monomer). The polymers exhibited high T_gs ranging from 238 to 256 °C and displayed good thermal stability with 5% degradation temperatures in air from 453–510 °C, depending on molecular weight and bisphenol composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3127–3131     

Adding magnetic ionic liquid monomers to the emulsion polymerization tool‐box: Towards polymer latexes and coatings with new properties

Magnetic ionic liquid monomers were synthesized and then polymerized to get magnetic polymer latexes and films. First, a series of 1‐vinyl‐3‐dodecyl‐imidazolium monomers having metal halides counter‐anions such as FeCl₃Br^?, CoCl₂Br^?, and MnCl₂Br^? were synthesized. These ionic liquid monomers were first homopolymerized to lead to magnetic poly(ionic liquids) and characterized. Secondly, magnetic latexes were synthesized by using the magnetic ionic liquids as surfmers (surfactant + monomer) in the emulsion polymerization of methyl methacrylate/n‐butyl acrylate. It was found that the powders obtained by freeze‐drying the latexes presented a paramagnetic behavior with weak antiferromagnetic interactions between the adjacent metal ions. Although the ratio of magnetic ionic liquid/monomer was only 2% these poly(methyl methacrylate‐co‐butyl acrylate) powders and latexes responded to a magnetic field due to the surfmer paramagnetic nature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1145–1152     

Benzotriazole derivatives as long wavelength photosensitizers for diaryliodonium salt initiators

Two benzotriazole derivative dyes 4,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)‐2‐dodecyl‐2H‐benzo[1,2,3]triazole, and 2‐dodecyl‐4,7‐bis(4‐hexylthiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole are shown to work as efficient photosensitizers for a diphenyliodonium salt initiator in cationic photopolymerization of epoxide and vinyl monomers. Substituted thienyl groups are attached to benzotriazole backbone to extend conjugation and enhance electron density of the molecules. Thereby, it was possible to initiate polymerizations at room temperature using long wavelength UV and visible light. The progress of photopolymerizations was monitored using optical pyrometry. The photopolymerization of an epoxide monomer using solar irradiation was also demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Rod-like polyelectrolyte adsorption onto charged surfaces in monovalent and divalent salt solutions

We analyze the adsorption of strongly charged polyelectrolytes onto weakly charged surfaces in divalent salt solutions. We include short-range attractions between the monomers and the surface and between condensed ions and monomers, as well correlations among the condensed ions. Our results are compared with the adsorption in monovalent salt solutions. Different surface charge densities (σ), and divalent (m) and monovalent (s) salt concentrations are considered. When the Wigner-Seitz cells diameter (2R) is larger than the length of the rod, the maximum amount of adsorption scales like n_max ∼ σ^4/3 in both monovalent and divalent solutions. For homogeneously charged surfaces, the maximum adsorption occurs at s* ∼ σ² when s* > ϕ, where ϕ is the monomer concentration, the counterpart for divalent salt solution, m* roughly scales as σ^2.2 when m* > ϕ. The effective surface charge density has a maximum absolute value at m′ < m*. A discrete surface charge distribution and short-range attractions between monomers and surface charge groups can greatly enhance surface charge inversion especially for high salt concentration. The critical salt concentration for adsorption in divalent salt solution roughly scales as m_c ∼ bσ^1.9, where b is the distance between two neighboring charged monomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3642–3653, 2004     

A quinoxaline derivative as a long wavelength photosensitizer for diaryliodonium salts

This article reports the use of a quinoxaline derivative as a photosensitizer for diaryliodonium salt photoinitiators. 2,3‐bis(3,4‐bis(decyloxy)phenyl)‐5,8‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)quinoxaline (DOPEQ), is a highly conjugated compound with strong absorption bands at wavelengths ranging from 300 to 550 nm and is shown to facilitate photoinitiated cationic polymerization of heterocyclic monomers such as oxiranes and oxetanes. The polymerizations are initiated at room temperature by using long wavelength UV light in the presence of diphenyliodonium hexafluorophosphate (Ph₂I⁺PF). The polymerizations are monitored by optical pyrometry (OP). It is also possible to initiate photopolymerizations with ambient solar irradiation in the presence of this photosensitizer dye. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 209–213, 2010     

Precision synthesis of sustainable thermoplastic elastomers from lysine‐derived monomers

Novel renewable thermoplastic elastomers were synthesized by sequential polymerization of lysine‐ and itaconic acid‐derived monomers. Ring‐opening polymerization of lysine‐based O‐carboxyanhydride monomer using diethylene glycol as an initiator gave well‐defined α,ω‐dihydroxy functionalized lysine‐derived polyesters. The M _n of these polyesters increased with the monomer conversion while retaining relatively narrow molecular weight distributions. Based on the successful controlled polymerization and esterification of α,ω‐dihydroxy with 2‐bromoisobutyryl bromide, the resultant Br‐PL‐Br macroinitiator was used for the atom transfer radical polymerization of N‐phenylitaconimide (PhII). Three poly(N‐phenylitaconimide)‐b‐polyester‐b‐poly(N‐phenylitaconimide) triblock copolymers were prepared containing 12 ? 25 mol% PPhII, as determined by ¹H NMR spectroscopy. The properties of the obtained triblock copolymer are evaluated as high‐performance and renewable thermoplastic elastomer materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 349–355     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009     

Solvent‐free inkjet printing process for the fabrication of conductive,transparent, and flexible ionic liquid‐polymer gel structures

A new and solvent‐free process for the fabrication of inkjet printed ionic liquid‐polymer gel microstructures with high‐resolution (line widths of ～40 μm), good electrical conductivity (5–30 mS cm^?1), optical transparency, and mechanical flexibility is presented. Carrying out the printing and polymerization process in nitrogen atmosphere eliminates the inhibiting influence of oxygen and guarantees homogeneously gelled structures. Careful selection and combination of ionic liquids (ILs) and unsaturated monomers makes it possible to achieve low viscosities which are printable with commercially available inkjet printers and printheads without adding extra solvents. By using different types and amounts of ILs and monomers the resulting properties of the printed IL‐polymer gels can be controlled in terms of ionic conductivity, optical transmission, and mechanical flexibility. Higher conductivities are possible by using a bifunctional instead of a monofunctional monomer, which allows one to lower the amount of monomer without loss in mechanical strength. Cast samples make it possible to obtain data of transmission (～90% for 170‐μm thick films) and mechanical flexibility (E = 0.02–0.23 MPa) of bulk material. Comparing electrical conductivity of printed and cast samples, the higher values of printed samples indicate the conductivity enhancing influence of moisture absorbed from the surrounding atmosphere after the fabrication process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Detrimental Ni(0) transfer in Kumada catalyst transfer polycondensation of benzo[2,1‐b:3,4‐b']dithiophene

This article deals with the Kumada Catalyst Transfer Polycondensation (KCTP) of 4,7‐dioctylbenzo[2,1‐b:3,4‐b']dithiophene ( BDP‐Oct ) using Ni(II) catalyst or In/cat combination. A combination of MALDI MS, GPC, and ³¹P NMR spectroscopy is used to reveal the failure of the KCTP of this particular monomer. Intermolecular transfer reactions to monomer appeared to prevent the formation of polymer. This result is remarkable, since isomeric benzo[1,2‐b:4,5‐b']dithiophene polymerizes in a controlled way. The presence of a “non‐aromatic double bond” in annulated monomers is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1706–1712     

Reactivity of oxetane monomers in photoinitiated cationic polymerization

Studies of the onium salt photoinitiated cationic ring‐opening polymerizations of various 3,3‐disubstituted oxetane monomers have been conducted with real‐time infrared spectroscopy and optical pyrometry. The polymerizations of these monomers are typified by an extended induction period that has been attributed to the presence of a long‐lived tertiary oxonium ion intermediate formed by the reaction of the initially formed secondary oxonium ion with the cyclic ether monomer. Because the extended induction period in the photopolymerization of these monomers renders oxetane monomers of limited value for many applications, methods have been sought for its minimization or elimination. Three general methods have been found effective in markedly shortening the induction period: (1) carrying out the photopolymerizations at higher temperatures, (2) copolymerizing with more reactive epoxide monomers, and (3) using free‐radical photoinitiators as synergists. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3205–3220, 2005     

Semiconductor nanoparticles for photoinitiation of free radical polymerization in aqueous and organic media

Photoinduced free radical polymerization of vinyl monomers by using semiconductor inorganic nanoparticles (NPs) is investigated. Zinc oxide and iron‐doped zinc oxide were used as photosensitive compounds to initiate the polymerization of acrylamide as a water‐soluble monomer in aqueous environment and methyl methacrylate as an oil‐soluble monomer in organic media under UV‐light irradiation. The method uses photochemically generated electrons and holes from the NPs to form initiating hydroxyl radicals in aqueous media, while tertiary amines and iodonium salt served as coinitiator in organic media. The initiation mechanism in organic media involves hydrogen abstraction or reduction processes via charge carriers, respectively. The kinetic of the polymerization in both environments was studied by means of a photo‐differential scanning calorimetry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1500–1507     

Polymerization of acrylates by atom transfer radical polymerization. Homopolymerization of 2-hydroxyethyl acrylate

The application of atom transfer radical polymerization (ATRP) to the homopolymerization of 2-hydroxyethyl acrylate, a functional monomer, is reported. The polymerizations exhibit first-order kinetics, and molecular weights increase linearly with conversion. Polydispersities remain low throughout the polymerization (M_w/M_n ≈ 1.2). Reactions were conducted in bulk and in 1 : 1 (by volume) aqueous solution; the latter demonstrates the resilience of ATRP to protic media. Analysis of poly(2-hydroxyethyl acrylate) by MALDI-MS and ¹H-NMR shows M_n,exp to be much closer to M_n,th than those observed by SEC using polystyrene standards. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1417–1424, 1998     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

The influence of vinyl activating groups on β‐allyl sulfone‐based chain transfer agents for tough methacrylate networks

In radical polymerization of monofunctional monomers, addition fragmentation chain transfer (AFCT) agents are well known to regulate polymerization and yield polymers with lower molecular weights and narrower molecular weight distributions. Papers concerning bulk photopolymerization of monomer mixtures with AFCT agents are rarely found in literature. In this article, AFCT reagents based on β‐allyl sulfones with different vinyl activating groups were synthesized and compared. The compounds were tested in mono‐ and difunctional monomer systems providing information about the influence on photoreactivity, molecular weight, as well as thermal and mechanical properties of the resultant polymers. Where more potent activating groups (‐Ph, ‐CN) markedly influenced polymerization at lower concentrations, the AFCT reagent with an ester activating group reacted at a similar rate to the methacrylate monomer (C_T ≈ 1) and provided the best overall performance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1417‐1427     

Synthesis and radical polymerization of hydrophilic methacrylates with oxyethylene units in the pendant chain

The syntheses of methacrylic monomers of the general structure where n is 3, 4, 5, or 6, were performed by the reaction of the corresponding alcohol ethers with methacryloyl chloride. The alcohol ethers were previously prepared by different synthetic procedures involving the monoetherification of the starting glycols. The polymerizations kinetics of the monomers were examined at several temperatures in the bulk and in dioxane solutions. NMR spectroscopy and electron paramagnetic resonance techniques were used to study the kinetics of polymerization. The polymerization rate parameter, expressed as (2f)^1/2k_p/〈k_t〉^1/2, and the values of the propagation rate coefficient k_p and the termination rate coefficient 〈k_t〉/f, where f is the efficiency factor of the initiator, were determined. The reactivity of the monomers depended on the size of the ester residue in such a way that the longer the lateral chain was, the higher the polymerization rate was and the lower the termination rate coefficient was. On the contrary, the dependence of k_p on the chemical structure was very small. In the solution polymerizations of all these monomers (monomer concentration = 1 mol L^?1), the radical concentrations remained almost constant until very high conversions, whereas in the bulk, a different behavior was observed that depended on the number of oxyethylene units in the side chain of the monomer. In this sense, for n = 4, 5, or 6, the radical concentration remained almost invariable with the reaction time, whereas for n = 3, a moderate increase occurred at low conversions, contrasting with the important increase observed at similar conversions for n = 1. This showed that the gel effect in these methacrylic monomers was greatly dependent on the number of bonds of the lateral chain. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1567–1579, 2003