Rubbery wound closure adhesives. I. design,synthesis, characterization,and testing of polyisobutylene‐based cyanoacrylate homo‐ and co‐networks

Novel rubbery wound closures containing various proportions and molecular weights of polyisobutylene (PIB) and poly(2‐octyl cyanoacrylate) [P(OctCA)] for potential clinical use were designed, synthesized, characterized, and tested. Homo‐networks were prepared by crosslinking 3‐arm star‐shaped PIBs fitted with terminal cyanoacrylate groups, [Ø(PIB‐CA)₃], and co‐networks by copolymerizing Ø(PIB‐CA)₃ with OctCA using N‐dimethyl‐p‐toluidine (DMT). Neat Ø(PIB‐CA)₃, and Ø(PIB‐CA)₃/OctCA blends, upon contact with initiator, polymerize within seconds to optically transparent strong rubbery co‐networks, Ø(PIB‐CA)₃‐co‐P(OctCA). Homo‐ and co‐network formation was demonstrated by sol/gel studies, and structures and properties were characterized by a battery of techniques. The T_g of P(OctCA) is 58 °C by DSC, and 75 °C by DMTA. Co‐networks comprising 25% Ø(PIB‐CA)₃ (M_n = 2400 g/mol) and 75% P(OctCA) are stronger and more extensible than skin. Short and long term creep studies show co‐networks exhibit high dimensional stability and <6% creep strain at high loading. When deposited on porcine skin co‐networks yield hermetically‐adhering clear rubbery coatings. Strips of porcine skin coated with co‐networks could be stretched and twisted without compromising membrane integrity. The co‐network is nontoxic to L‐929 mouse fibroblasts. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1640–1651     

Influence of Fe‐MMT on crosslinking and thermal degradation in silicone rubber/clay nanocomposites

In this article, silicone rubber (SR)/clay nanocomposites were synthesized by a melt‐intercalation process using synthetic Fe‐montmorillonite (Fe‐MMT) and natural Na‐MMT which were modified by cetyltrimethyl ammonium bromide (CTAB). This study has been designed to determine if the presence of structural iron in the matrix can result in radical trapping and then enhance thermal stability, affect the crosslinking degree and elongation. The SR/clay nanocomposites were characterized by X‐ray diffraction (XRD) patterns and transmission electron microscopy (TEM). Exfoliated and intercalated nanocomposites were obtained. Thermo gravimetric analysis (TGA) and mechanical performance were applied to test the properties of the SR/clay nanocomposites. The presence of iron significantly increased the onset temperature of thermal degradation in SR/Fe‐MMT nanocomposites. The thermal stability, gel fraction and mechanical property of SR/Fe‐MMT were different from the SR/Na‐MMT nanocomposites. So the iron not only in thermal degradation but in the vulcanization process acted as an antioxidant and radicals trap. Copyright © 2006 John Wiley & Sons, Ltd.     

Polybutadiene model networks —synthesis,mechanical characterization and comparison with rubber elasticity models

Model networks of defined crosslink density are prepared via nonradical statistical crosslinking of polybutadiene in bulk and concentrated solution using a masked bistriazolinedione as crosslinker. The kinetics of crosslinking is monitored by FT-IR-spectroscopy. The reaction follows pseudo-1st-order reaction kinetics. The activation parameter of the crosslinking reaction is estimated from crosslinking at various temperatures. Networks of deuterated polybutadiene are prepared by this reaction in a wide range of crosslink densities. The stress strain behavior is analyzed according to the Junction Constraint-Theory of rubber elasticity (JCT) and to the approach introduced by Graessley accounting for trapped topological constraints. The analysis clearly demonstrates that trapped entanglements contribute to the mechanically effective cycle rank, i.e., to the modulus in this system in the small and large strain limit.     

Research on high temperature friction properties of PTFE/Fluorosilicone rubber/silicone rubber

Silicone rubber (MVQ) has excellent heat resistance, but poor high temperature friction stability, which limits its application in the field of high temperature sealing. Polytetrafluoroethylene (PTFE) is self-lubricating, but its compatibility with rubber is relatively weak. In order to improve the high-temperature friction property of silicone rubber, fluorosilicone rubber (FVMQ) was used as a compatibilizer, and PTFE was added to MVQ by mechanical blending. The friction and wear properties of PTFE/FVMQ/MVQ composites at different temperatures were studied. The results show that compared with MVQ, the mechanical properties of PTFE/FVMQ/MVQ composites was basically unchanged, the coefficient of friction was hardly affected by temperature, and the amount of wear decreased with increasing temperature. PTFE/FVMQ/MVQ composites showed excellent high-temperature abrasion resistance. The high-temperature wear mode was mainly changed from abrasive wear to adhesive wear. The molten layer formed by high-temperature friction can prevent air from directly contacting the surface rubber, which inhibited rubber surface oxidation reaction process.     

Thermal decomposition properties and compatibility of CL-20, NTO with silicone rubber

The new polycyclic nitramine 2,4,6,8,10,12-hexanitrohexaazaisowurtzitane (HNIW) has been focused as a considerable amount of research recently on investigating its polymorphs, relative stability, and respective reaction chemistry. It is known as CL-20 popularly, CL-20 is a very high-energy and relatively high oxygen balance value crystalline compound whose method of synthesis and detailed performance data are still classified. 5-oxo-3-nitro-1,2,4-triazole (NTO, or nitrotriazolone) was an insensitive molecule comparison general explosives, and the NTO based polymer bonded explosives (PBX) was a low vulnerability explosive. Both energetic materials are all very important high explosives, which is used in a variety of military formulations widely owing to the properties of high energy and desensitization of PBX, many researchers have demonstrated the usefulness of above two energetic materials in explosive component. In this work, the thermal decomposition characteristics of explosives CL-20 and NTO were studied using thermal analytical techniques (TG, DSC), then the compatibility of above two explosives with silicone rubber, and the decomposition kinetic parameters such as activation energies of decomposition, the frequency factor of the decompose reaction are also evaluated by non-isothermal DSC techniques.     

Cyclosiloxane‐based networks: Synthesis,thermal characterization,and microstructure

This article mainly concerns the synthesis of novel PD₅/PDMS conetworks by the copolymerization of cyclic D₅H and linear HO? PDMS? OH units, and the characterization of the product by DMTA, DSC, and TGA. The ultimate properties of the conetworks may be controlled by varying the relative composition of D₅H and PDMS components. DMTA and DSC thermograms indicate compatibility between the PD₅ and PDMS domains. Understanding of the polymer chemical transformations involved in conetwork formation combined with an analysis of DMTA and DSC thermograms led to a proposition of the microarchitecture of PD₅/PDMS conetworks. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 630–637, 2005     

Fabrication of exfoliated graphite reinforced silicone rubber composites - Mechanical,tribological and dielectric properties

The effect of exfoliated graphite (EG) on the mechanical, tribological and dielectric properties of the silicone rubber (QM) composites has been systematically investigated and analysed. Morphological analysis of the composites helps to understand the interfacial interaction between the filler and the rubber matrix as well as wear mechanism respectively. An enhancement in the mechanical, tribological and dielectric properties was observed with an increase in filler loading and better performance was observed at 7 phr of filler loading. The improvement in performance is attributed to the better interaction between the QM chains and the EG layers as evident from the AFM and TEM analysis. It is also evident from the Kraus plot which supports the reinforcing effect of EG in QM matrix.     

Synthesis of novel silicone modified acrylic resins and their film properties

New silicone modified acrylic resins were synthesized and some of their film properties were investigated. At first, macromer (MC) was synthesized by the condensation reaction of the reactive polysiloxane intermediate (Z-6018) and 2-hydroxyethyl methacrylate (HEMA) in toluene as solvent at 110°C under nitrogen atmosphere. Then, MC was reacted with 2-dimethylaminoethyl methacrylate (DMAEMA) at different mole ratios (1:1, 1:3, 1:5) by using benzoyl peroxide as initiator in toluene to obtain novel silicone acrylic resins. These resins were characterized by Fourier Transform Infrared Spectrometry (FT-IR), and their thermal properties were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. The properties of the films prepared from these resins were determined. The results showed that these resins are thermally stable polymers and all films are flexible, semi-gloss and have excellent drying, adhesion properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and properties of nanocomposites based on acrylonitrile–butadiene rubber,styrene–butadiene rubber,and polybutadiene rubber

Nanocomposites were prepared with different grades of nitrile rubber with acrylonitrile contents of 19, 34, and 50%, with styrene–butadiene rubber (23% styrene content), and with polybutadiene rubber with Na‐montmorillonite clay. The clay was modified with stearyl amine and was characterized by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM). The XRD studies showed an increase in the gallery gap upon the modification of the filler by stearyl amine. The intercalation of the amine chains into the clay gallery gap was confirmed by the presence of some extra peaks (2928, 2846, and 1553 cm^?1) in the FTIR spectra. The clay–rubber nanocomposites were characterized by TEM and XRD. The mechanical properties were studied for all the compositions. An improvement in the mechanical properties with the degree of filler loading up to a certain level was observed. The changes in the mechanical properties, with changes in the nature and polarity of the rubbers, were explained with the help of XRD and TEM results. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1573–1585, 2004     

Effects of compression cycles and precompression pressure on the repeatability of piezoresistivity for carbon black‐filled silicone rubber composite

We studied the influences of the compression cycles and the precompression pressure on the piezoresistivity of carbon black‐filled silicone rubber composite. The experimental results show that if the load pressure is less than the maximum pressure in the precompression cycle, the repeatability of the piezoresistivity is improved with the increase of the compression cycles. Once the load pressure surpasses the maximum pressure in the precompression cycle, the piezoresistivity of the composite is changed distinctly. The experimental phenomena are explained and described qualitatively by analyzing the changes in the composite resistance under the zero pressure and the slippage of the molecule chain during the compression. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1050–1061, 2008     

Preparation and properties of dynamically cured poly(vinylidene fluoride)/silicone rubber blends

Blends of poly(vinylidene fluoride) (PVDF) and silicone rubber (SR) were prepared through dynamic vulcanization. The effects of SR content on crystallization behavior, rheology, dynamic mechanical properties and morphology of the blends were investigated. Morphology characterization shows that the crosslinked spherical SR particles with an average diameter of 2-4 μm form a “network” in the PVDF continuous phase. The dynamic mechanical properties indicate the interface adhesion between PVDF and rubber phase is improved by the dynamic vulcanization. The rheology study shows that with the increase of rubber content the blends pseudoplastic nature is retained, while the viscosity increases, and hence the processability is less good. The incorporation of SR phase promotes the nucleation process of PVDF, leading to increased polymer crystallization rate and crystallization temperature. However, a higher content of SR seems to show a negative effect on the crystallinity of the PVDF component.     

Effects of functional graphene oxide on the properties of phenyl silicone rubber composites

Graphene oxide (GO) was treated with two types of surfactants, i.e., silane coupling agent (KH550) and 4,4’-diphenylmethane diisocyanate (MDI), incorporated into phenyl silicone rubber at a low concentration (≤0.2 wt%), and cured by the room temperature vulcanized method. The effects of functional graphene oxide on the dielectric behaviour, thermal conductivity, optical transmittance and mechanical properties of the composites were investigated. The results showed that the particle size changed after modification and that the modified GO dispersed well in the phenyl silicone rubber. The composites with MDI modified GO exhibited better electrical insulation and lower light loss in the ultraviolet–visible region than the composites with KH550 modified GO. However, composites filled with KH550 modified GO present better thermal conductivity.     

Effects of partial replacement of silicone rubber with flurorubber on properties of dynamically cured poly(vinylidene fluoride)/silicone rubber/flurorubber ternary blends

Blends of poly(vinylidene fluoride) (PVDF), silicone rubber (SR) and flurorubber (FKM) were prepared via peroxide dynamic vulcanization. The effect of FKM loading on the morphology, mechanical properties, crystallization behavior, rheology and dynamic mechanical properties of the PVDF/SR/FKM ternary blends was investigated. A “network” was observed in the PVDF/SR binary blends, which disappeared in the ternary blends, but a core-shell-like structure was formed. The mechanical properties were significantly improved. The Izod impact strength of PVDF/SR/FKM blend with 19 wt% FKM was 18.3 kJ/m², which was 3–4 times higher than the PVDF/SR binary blend. The complex viscosity and storage modulus of the PVDF/SR/FKM blends decreased with increasing FKM content, hence the processability was improved. The increase of FKM content seemed to show a favorable effect on the crystallization of the PVDF component. It promoted the nucleation process of PVDF, leading to increased polymer crystallization rate and higher crystallization temperature. The glass-rubber transition temperature of the PVDF phase moved to a lower temperature.     

苯乙烯-异戊二烯-丁二烯三元集成橡胶的合成、表征及性能研究

以正丁基锂为引发剂、环己烷-己烷混合溶剂为溶剂,采用二元结构调节剂,对S-SIBR(溶液苯乙烯-异戊二烯-丁二烯共聚物)三元共聚进行了研究,考察了不同单体含量,以及苯乙烯微嵌段含量对SIBR性能的影响.在500 L全流程中试装置中采用湿法充油技术批量制备了充油型集成橡胶,对充油集成橡胶的结构、性能以及在轮胎中的应用进行了研究.结果表明,充油型SIBR的混炼行为、硫化速度、机械性能、滚动损失及抗湿滑性能均较优异,机械性能完全符合轮胎胎面胶的性能要求,并且具有优异的抗湿滑性和滚动阻力,是一种理想的轮胎胎面材料.     

Morphology and properties of natural rubber with nanomatrix of non‐rubber components

The morphology of natural rubber was observed by transmission electron microscopy. Nanomatrix of non‐rubber components such as proteins and phospholipids was found to be inherently formed in natural rubber, in which natural rubber particles of about 0.5 µm in average diameter were dispersed. The nanomatrix of non‐rubber components disappeared after deproteinization of natural rubber with urea. Stress at break of serum rubber was higher than that of deproteinized natural rubber, while strain at break did not change. When the amount of the non‐rubber components increased, the stress at break became significantly dependent upon the amount of non‐rubber components. Viscoelastic properties of natural rubber were also dependent upon the nanomatrix of non‐rubber components. Storage modulus of natural rubber increased significantly, when the amount of the non‐rubber components increased. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of hydrogenated nitrile rubber using palladium acetate catalyst: Its characterization and kinetics

Hydrogenated nitrile rubber was prepared by using palladium acetate as the homogeneous catalyst system. The effect of different reaction parameters on the level of hydrogenation was studied. The extent of hydrogenation increased with increase in reaction time, temperature, pressure, and catalyst concentration. A maximum conversion of 96% could be achieved. The degree of hydrogenation was estimated from IR and NMR spectroscopy. The selectivity of the catalyst in reducing ? C?C? in presence of ? C?N was supported by IR and ¹³C-NMR spectra. ESCA studies further confirmed this observation. Properties of hydrogenated nitrile rubber were investigated by various techniques such as gel permeation chromatography (GPC), glass transition temperature (T_g), stress-strain behavior and rheological measurements. GPC studies showed no significant change in molecular weights of the products after the reaction. T_g value decreased with an increase in the level of hydrogenation. The ultimate stress improved significantly with the increase in the extent of hydrogenation. The die swell decreased with hydrogenation at a particular shear rate. The kinetics of the NBR hydrogenation were investigated. With the increase of the hydrogen pressure and catalyst concentration, the rate of the reaction increased. The reaction was apparently first order with respect to olefinic substrate at higher hydrogen pressure. The apparent activation energy, enthalpy, and entropy of the reaction were calculated as 29.9 kJ/mol, 27.42 kJ/mol, and –0.20 kJ mol^?1 K^?1, respectively.     

Preparation and characterization of a homobifunctional silicone rubber membrane grafted with acrylic acid via plasma-induced graft copolymerization

Polyacrylic acid (PAA) was grafted onto the surface of silicone rubber membrane (SR) by plasma-induced graft copolymerization (PIP). Ar-plasma was used to activate the surface of SR. Also, a determination was made of the influences of plasma treatment power, pressure, time, grafted copolymerization reaction time, and monomer concentration on polymerization yield. The surface properties of SR were measured by ATR-FTIR, ESCA, and SIMS. In those analyses, the elemental composition and different carbon bindings on the surface of SR were examined by ESCA with the amount of O1s/C1s being approximately 0.7 at 60 s by Ar-plasma treatment (60 W, 200 mtorr). The peroxide group introduced on SR was measured via 1,1-diphenyl-2-picryhydrazyl (DPPH). The optimum amount of peroxide groups was 6.85 × 10⁻⁸ mol/cm² at 60 s of Ar-plasma treatment. The peroxide group (33D peak) was introduced onto the surface of SR by negative spectra of SIMS analysis after SR treatment by Ar-plasma. An increase was obtained in grafted polymerization yield with a region of 5 to 50% (v/v) of acrylic acid aqueous solution. Both sites of polyacrylic acid were detected after staining by toluidine blue O. That is, a homobifunctional membrane was developed via this surface modification method. © 1996 John Wiley & Sons, Inc.     

A critical review on analytical methods and characterization of butyl and bromobutyl rubber

The molecular structure characterization of butyl and bromobutyl rubber (BIIR) requires the definition of three main parameters: (I) the unsaturation degree of the rubbers, (II) the total bromine content of the BIIRs, and (III) the functional bromine content of the BIIRs. The analytical methods for the determination of the previously mentioned parameters have been described and critically examined in this review.