Polyisobutylene‐based polyurethanes. V. Oxidative‐hydrolytic stability and biocompatibility

The oxidative/hydrolytic stability of polyurethanes (PUs) containing exclusively polyisobutylene (PIB), or mixed PIB/polytetramethylene oxide (PTMO), or mixed PIB/polyhexamethylene carbonate (PC) soft segments was investigated. The tensile strengths and elongations of various PUs were determined before and after agitating in 35% HNO₃ or 20% H₂O₂/0.1 M CoCl₂ solutions and retentions were quantified. The presence of PIB imparts significant oxidative/hydrolytic resistance. The tensile strength and elongation of PUs containing 70% PIB, or those of mixed PIB/PC soft segments with 50% PIB, remained essentially unchanged upon exposure to HNO₃; in contrast, PUs containing mixed PIB/PTMO soft segments with 50% PIB underwent significant degradation. The tensile strength of PUs with mixed PIB/PC (60/10%) soft segment increased after exposure to HNO₃, most likely because of oxidative crosslinking of PC segments. PIB/PTMO‐ and PIB/PC‐based PUs and commercially available PUs (Elast‐Eon® and Carbothane®) were exposed to H₂O₂/CoCl₂ solutions for up to 14 weeks. Although the experimental PIB/PC‐based PUs exhibited negligible change in mechanical properties and no surface damage, Elast‐Eon® and Carbothane® showed significant surface damage. PIB‐based polyureas and Bionate® were implanted in rats for 4 weeks in vivo, and their biocompatibility was investigated. The biocompatibility of PIB‐based materials was superior to Bionate®. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2194–2203, 2010     

Calcification resistance of polyisobutylene and polyisobutylene‐based materials

Calcification of implanted biomaterials is highly undesirable and limits clinical applicability. Experiments were carried out to assess the calcification resistance of polyisobutylene (PIB), PIB‐based polyurethane (PIB‐PU), PIB‐PU reinforced with (CH₃)₃N⁺CH₂CH₂CH₂NH₂ I^?‐modified montmorillonite (PIB‐PU/nc), PIB‐based polyurethane urea (PIB‐PUU), PIB‐PU containing S atoms (PIB_S‐PU), PIB_S‐PU reinforced with (CH₃)₃N⁺CH₂CH₂CH₂NH₂ I^?‐modified montmorillonite (PIB_S‐PU/nc), and poly(isobutylene‐b‐styrene‐b‐isobutylene) (SIBS), relative to that of a clinically widely implanted polydimethylsiloxane (PDMS)–based PU, Elast‐Eon (the “control”). Samples were incubated in simulated body fluid for 28 days at 37°C, and the extent of surface calcification was analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy‐dispersive X‐ray spectroscopy (EDX), X‐ray photoelectron spectroscopy (XPS), and Fourier‐transform‐infrared (FT‐IR) spectroscopy. Whereas the PDMS‐based PU showed extensive calcification, PIB and PIB‐PU containing 72.5% PIB, ie, a polyurethane whose surface is covered with PIB, were free of calcification. PIB_S‐PU and PIB‐PUU, ie, polyurethanes that contain S or urea groups, respectively, were slightly calcified. The amine‐modified montmorillonite‐reinforcing agent reduced the extent of calcification. SIBS was found slightly calcified. Evidently, PIB and materials fully coated with PIB are calcification resistant.     

Polyisobutylene‐based polyurethanes X: PU nanocomposites with s‐containing soft segments

Sulfur‐containing polyisobutylene (PIB)‐based polyurethane nanocomposite (PIB_s‐PU/NC) was synthesized using HO? CH₂CH₂? S? PIB? S? CH₂CH₂? OH for the soft segment, conventional hard segments of MDI and BDO, and organically modified montmorillonite (OmMMT) nanolayers. The properties of PIB_s‐PU/NC containing 72.5% PIB and 0.5% OmMMT were studied and contrasted with unmodified PIB_s‐PU. PIB_s‐PU/NC produces colorless optically clear films exhibiting enhanced tensile strength, elongation, oxidative–hydrolytic stability, and creep resistance relative to that of PIB_s‐PU. FTIR spectroscopy indicates H bonded S atoms between soft and hard segments, and OmMMT nanolayers. DSC and XRD suggest randomly dispersed low‐periodicity crystals and urea groups between galleries. We propose that minute amounts of OmMMT nanolayers become covalently attached to polyurethane chains and beneficially affect properties by acting as co‐chain extender/reinforcing filler. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2760–2765     

Polyisobutylene‐based polyurethanes: VII. structure/property investigations for medical applications

The outstanding hydrolytic and oxidative stabilities of polyisobutylene‐based polyurethanes (PIB‐based PUs) were reported earlier. Herein, we summarize recent investigations aimed at further enhancing hydrolytic‐oxidative stabilities (in terms of resistance to aqueous buffer, nitric acid and CoCl₂/H₂O₂) together with excellent mechanical properties. The purity and dryness of ingredients together with precise NCO/OH stoichiometry (～1.05) are essential to obtain PIB‐based PUs with improved properties. Static and dynamic mechanical properties were optimized by analyzing stress–strain traces, thermal (TGA, DSC) responses, self‐organization (XRD) profiles, and rheological (DMA, creep) information. According to microstructure and surface analyses (AFM, contact angle) annealing increases the segregation of individual segments and increases surface hydrophobicity, which in turn enhances the shielding of hydrolytically oxidatively vulnerable carbamate bonds by inert PIB barriers, and thus significantly improves hydrolytic‐oxidative stability. Annealing does not much affect bulk properties, such as static and dynamic mechanical and thermal properties; however, it increases damping over a wide temperature range. Annealed PIB‐based PU containing 72.5% PIB exhibits outstanding hydrolytic‐oxidative stability together with ～26 MPa tensile strength, ～500% elongation, and ～77 Microshore hardness. PIB‐based PUs are significantly more resistant to hydrolytic and oxidative degradation than ElastEon? E2A, a commercially available PDMS‐based PU, widely used for medical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 532–543     

Polyisobutylene‐based polyurethanes. IX. synthesis,characterization, and properties of polyisobutylene‐based poly(urethane‐ureas)

Polyisobutylene (PIB)‐based polyurethanes (PUs) exhibit unparalleled hydrolytic‐oxidative‐biologic stability and are melt processible, however, their mechanical (strength) properties are modest mainly due to insufficient H bonds. We posited and demonstrate that the ultimate properties of PIB‐PUs are enhanced, while their melt processibility is maintained, by the judicious introduction of urea linkages, i.e., strong bifurcated H bonds, in the chain. The incorporation of bifurcated H bonds in PIB‐PUs was achieved by using the conventional butane diol chain extender (CE) in combination with controlled amounts of amino alcohol as co‐chain extender (co‐CE). Polyurethanes containing both urethane and urea linkages are polyurethane‐ureas (PUU). Specifically, PIB‐PUUs prepared with PIB‐diol/MDI together with 80/20 mole % butane diol/amino butanol exhibited ～30 MPa tensile strength, ～550% elongation, ～80 Shore A hardness, and ～137 °C flow temperature. Other amino alcohols, i.e., amino ethanol, ‐propanol, and ‐hexanol, were less effective co‐CEs. ¹H‐NMR and FT‐IR spectroscopies indicate the presence of bifurcated H bonds in PIB‐PUUs prepared with CE/co‐CE combinations. Characterization by differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and creep experiments also suggest bifurcated H bonds in PIB‐PUU. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2361–2369     

Regioselective Benzoylation of 6‐O‐Protected and 4,6‐O‐Diprotected Hexopyranosides as Promoted by Chiral and Achiral Ditertiary 1,2‐Diamines

Monobenzoylation of triols (6‐O‐silylated glycopyranosides) or diols (4,6‐O‐benzylidenated glycopyranosides) with benzoyl chloride and triethylamine at ?60° to 23° is promoted by catalytic amounts of ditertiary 1,2‐diamines. The regioselectivity depends mostly on the structure of the alcohols; it is modulated by the configuration and constitution of the diamines, as shown by comparing the effect of Oriyama's catalyst ((S)‐ 1 and (R)‐ 1 ), N,N,N′,N′‐tetramethylethylenediamine (TMEDA), N,N,N′,N′‐tetraethylethylenediamine (TEEDA), Et₃N, and EtNMe₂. The effect of the catalysts on the reactivity is impaired by their steric hindrance. In agreement with the modest enantioselectivity of the mono‐ and dibenzoylation of rac‐cyclohexane‐1,2‐diol in the presence of Oriyama's catalyst, the influence of these diamines on the regioselectivity is rather limited. While associated with procedural simplicity, these catalysts lead, in a few cases, to higher yields of a single benzoate than established methods, viz. in the preparation of the 3‐O‐benzoyl β‐D ‐glucopyranoside 4 , the 2‐O‐benzoyl α‐D ‐galactopyranoside 22 , the 3‐O‐benzoyl α‐D ‐galactopyranoside 23 , and the benzylidenated 2‐O‐benzoyl α‐D ‐galactopyranoside 44 . The regioselective benzoylation of the benzylidenated β‐D ‐mannopyranoside 47 , leading to 48 , appears to be new.     

Polyisobutylene‐based polyurethanes. VI. Unprecedented combination of mechanical properties and oxidative/hydrolytic stability by H‐bond acceptor chain extenders

We describe the design, synthesis, characterization, and testing of novel polyurethanes (PUs) exhibiting unprecedented combinations of outstanding mechanical properties and oxidative/hydrolytic stabilities. This achievement is due to the use of polyisobutylene (PIB) soft segments plus flexible H‐bond acceptor chain extenders (HACEs): the PIB imparts superior oxidative/hydrolytic stability and the HACE produces reinforcing H‐bonds, which lead to outstanding mechanicals. Oxidative/hydrolytic stability was quantitated by retention of tensile strength and elongation after exposure to nitric acid. PUs containing 60–70% PIB retain their mechanical properties, whereas Carbothane®, Bionate®, and Elast‐Eon?, PUs marketed for chemical stability, degrade severely under the same conditions. Various HACEs were identified (e.g., hexaethylene glycol, tripropylene glycol, tributylene glycol, 3,3′‐diamino‐N‐methyl‐dipropylamine, etc.) and their effect on mechanical properties was investigated. A PIB‐ and HACE‐containing PU exhibited 29.2 MPa tensile strength, 620% elongation, and 80 Shore A hardness. Properties were analyzed in terms of stress–strain profiles, differential scanning calorimetry traces, dynamic mechanical thermal analysis plots, and oxidative/hydrolytic stability. The properties of various PIB‐based rubbers, that is, thermoplastic PUs, SIBSTAR®, and thermoset butyl rubber are compared. The novel PUs are promising candidates for biomaterials and industrial applications where a combination of mechanical properties and oxidative/hydrolytic stability is of the essence. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2361–2371, 2010     

Novel and Stereospecific Synthesis of (2S)‐3‐(2,4,5‐Trifluorophenyl)propane‐1,2‐diol from D‐Mannitol

A stereospecific synthesis of (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol from D ‐mannitol has been developed. The reaction of 2,3‐O‐isopropylidene‐D ‐glyceraldehyde with 2,4,5‐trifluorophenylmagnesium bromide gave [(4R)‐2,2‐dimethyl‐1,3‐dioxolan‐4‐yl](2,4,5‐trifluorophenyl)methanol in 65% yield as a mixture of diastereoisomers (1 : 1). The Ph₃P catalyzed reaction of the latter with C₂Cl₆ followed by reduction with Pd/C‐catalyzed hydrogenation gave (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol with >99% ee and 65% yield.     

Structural properties of D‐mannopyranosyl rings containing O‐acetyl side‐chains

The crystal structures of 1,2,3,4,6‐penta‐O‐acetyl‐α‐d ‐mannopyranose, C₁₆H₂₂O₁₁, and 2,3,4,6‐tetra‐O‐acetyl‐α‐d ‐mannopyranosyl‐(1→2)‐3,4,6‐tri‐O‐acetyl‐α‐d ‐mannopyranosyl‐(1→3)‐1,2,4,6‐tetra‐O‐acetyl‐α‐d ‐mannopyranose, C₄₀H₅₄O₂₇, were determined and compared to those of methyl 2,3,4,6‐tetra‐O‐acetyl‐α‐d ‐mannopyranoside, methyl α‐d ‐mannopyranoside and methyl α‐d ‐mannopyranosyl‐(1→2)‐α‐d ‐mannopyranoside to evaluate the effects of O‐acetylation on bond lengths, bond angles and torsion angles. In general, O‐acetylation exerts little effect on the exo‐ and endocyclic C—C and endocyclic C—O bond lengths, but the exocyclic C—O bonds involved in O‐acetylation are lengthened by ～0.02 Å. The conformation of the O‐acetyl side‐chains is highly conserved, with the carbonyl O atom either eclipsing the H atom attached to a 2°‐alcoholic C atom or bisecting the H—C—H bond angle of a 1°‐alcoholic C atom. Of the two C—O bonds that determine O‐acetyl side‐chain conformation, that involving the alcoholic C atom exhibits greater rotational variability than that involving the carbonyl C atom. These findings are in good agreement with recent solution NMR studies of O‐acetyl side‐chain conformations in saccharides. Experimental evidence was also obtained to confirm density functional theory (DFT) predictions of C—O and O—H bond‐length behavior in a C—O—H fragment involved in hydrogen bonding.     

Minute amounts of organically modified montmorillonite improve the properties of polyisobutylene‐based polyurethanes

We discovered that polyisobutylene (PIB)‐based polyurethanes (PIB‐PUs) containing minute amounts (0.5%) of chemically bound organically modified montmorillonite (OmMMT) surprisingly produce films exhibiting improved properties. The OmMMT was prepared by reacting sodium montmorillonite (Na⁺MMT^?) with quaternary ammonium salts of a tertiary amine carrying a ? NH₂ functionality. The positively charged quaternary amine group becomes electrostatically attached to negatively charged MMT layers and defoliates it, whereas the free ? NH₂ group reacts with diisocyanates and acts as an additional chain extender. Thus, when OmMMT is added to a mixture of ingredients assembled for the synthesis of PIB‐PUs, this modified clay becomes an integral part of the PU. Specifically, we found that the integration of 0.5% OmMMT to PIB‐based PUs produces films with significantly enhanced tensile strength, elongation, toughness, creep, and stress relaxation relative to that of PIB‐PUs. The findings were discussed and explained in terms of a proposed morphology for the nanocomposite. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4076–4087     

Detailed Investigation of the Immunodominant Role of O‐Antigen Stoichiometric O‐Acetylation as Revealed by Chemical Synthesis,Immunochemistry, Solution Conformation and STD‐NMR Spectroscopy for Shigella flexneri 3a

Shigella flexneri 3a causes bacillary dysentery. Its O‐antigen has the {2)‐[α‐d ‐Glcp‐(1→3)]‐α‐l ‐Rhap‐(1→2)‐α‐l ‐Rhap‐(1→3)‐[Ac→2]‐α‐l ‐Rhap‐(1→3)‐[Ac→6]_{≈40 %}‐β‐d ‐GlcpNAc‐(1→} ([(E)AB_AcC_AcD]) repeating unit, and the non‐O‐acetylated equivalent defines S. flexneri X. Propyl hepta‐, octa‐, and decasaccharides sharing the (E′)A′B_AcCD(E)A sequence, and their non‐O‐acetylated analogues were synthesized from a fully protected B_AcCD(E)A allyl glycoside. The stepwise introduction of orthogonally protected mono‐ and disaccharide imidate donors was followed by a two‐step deprotection process. Monoclonal antibody binding to twenty‐six S. flexneri types 3a and X di‐ to decasaccharides was studied by an inhibition enzyme‐linked immunosorbent assay (ELISA) and STD‐NMR spectroscopy. Epitope mapping revealed that the 2_C‐acetate dominated the recognition by monoclonal IgG and IgM antibodies and that the B_AcCD segment was essential for binding. The glucosyl side chain contributed to a lesser extent, albeit increasingly with the chain length. Moreover, tr‐NOESY analysis also showed interaction but did not reveal any meaningful conformational change upon antibody binding.     

Ein neuer Zugang zu 2′‐O‐(2‐Methoxyethyl)ribonucleosiden ausgehend von D‐Glucose

A New Access to 2′‐ O ‐(2‐Methoxyethyl)ribonucleosides Starting from D ‐Glucose A new synthesis of 2′‐O‐(2‐methoxyethyl)ribonucleosides, building blocks for second‐generation antisense oligonucleotides, starting from D ‐glucose is presented. The key‐step is the transformation of 3‐O‐methoxyethylallofuranose to 2‐O‐(2‐methoxyethyl)ribose by NaIO₄ oxidation. Together with the 4′‐phenylbenzoyl protecting group, which results in crystalline intermediates, this synthesis provides an easy and cheap access to 2′‐O‐(2‐methoxyethyl)‐substituted ribonucleosides.     

Minor amounts of glycerol improve the properties of polyisobutylene‐based polyurethane and its nanocomposites

The synthesis of primary hydroxyl‐telechelic polyisobutylene, HOCH₂‐PIB‐CH₂OH, often yields product the number average terminal functionality ( $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$) of which is less than theoretical 2.0, typically $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$ = 1.75–1.95. Polyurethane (PU) prepared with such low‐cost imperfect PIB‐diols, unsurprisingly, exhibit poor overall properties. Herein we report that mechanical, rheological, and thermal properties of polyisobutylene‐based polyurethane (PIB‐PU) and PIB‐PU reinforced with organically modified montmorillonite (OmMMT) prepared with PIB‐diol of $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$ = 1.85 are significantly enhanced by glycerol. Specifically, we document that calculated minor amounts of glycerol substantially improves tensile strength, ultimate elongation, elastic modulus, toughness, rubbery plateau, flow temperature, creep, permanent set, rate of recovery after loading, and thermal properties of PIB‐PU and OmMMT‐reinforced PIB‐PU prepared with PIB‐diol of $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$ = 1.85. The observations are summarized and discussed in terms of chemistry, micromorphology, and viscoelasticity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 929–935     

Synthesis of 5′‐O‐(2‐Azido‐2‐deoxy‐α‐D‐glycosyl)nucleosides and Their Antitumor Activities

The 1,3,4,6‐tetra‐O‐acetyl‐2‐azido‐2‐deoxy‐β‐D ‐mannopyranose ( 4 ) or the mixture of 1,3,6‐tri‐O‐acetyl‐2‐azido‐2‐deoxy‐4‐O‐(2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐galactopyranosyl)‐β‐D ‐mannopyranose ( 10 ) and the corresponding α‐D ‐glucopyranose‐type glycosyl donor 9 / 10 reacted at room temperature with protected nucleosides 12 – 15 in CH₂Cl₂ solution in the presence of BF₃?OEt₂ as promoter to give 5′‐O‐(2‐azido‐2‐deoxy‐α‐D ‐glycosyl)nucleosides in reasonable yields (Schemes 2 and 3). Only the 5′‐O‐(α‐D ‐mannopyranosyl)nucleosides were obtained. Compounds 21, 28, 30 , and 31 showed growth inhibition of HeLa cells and hepatoma Bel‐7402 cells at a concentration of 10 μM in vitro.     

Stereoselective Synthesis of 8‐Oxabicyclo[3.2.1]octane‐2,3,4,6,7‐pentols and Total Asymmetric Synthesis of 2,6‐Anhydrohepturonic Acid Derivatives and of β‐C‐manno‐Pyranosides Suitable for the Construction of (1→3)‐C,C‐Linked Trisaccharides

Enantiomerically pure (+)‐(1S,4S,5S,6S)‐6‐endo‐(benzyloxy)‐5‐exo‐{[(tert‐butyl)dimethylsilyl]oxy}‐7‐oxabicyclo[2.2.1]heptan‐2‐one ((+)‐ 5 ) and its enantiomer (−)‐ 5 , obtained readily from the Diels‐Alder addition of furan to 1‐cyanovinyl acetate, can be converted with high stereoselectivity into 8‐oxabicyclo[3.2.1]octane‐2,3,4,6,7‐pentol derivatives (see 23 – 28 in Scheme 2). A precursor of them, (1R,2S,4R,5S,6S,7R,8R)‐7‐endo‐(benzyloxy)‐8‐exo‐hydroxy‐3,9‐dioxatricyclo[4.2.1.0^2,4]non‐5‐endo‐yl benzoate ((−)‐ 19 ), is transformed into (1R,2R,5S, 6S,7R,8S)‐6‐exo,8‐endo‐bis(acetyloxy)‐2‐endo‐(benzyloxy)‐4‐oxo‐3,9‐dioxabicyclo[3.3.1]non‐7‐endo‐yl benzoate ((−)‐ 43 ) (see Scheme 5). The latter is the precursor of several protected 2,6‐anhydrohepturonic acid derivatives such as the diethyl dithioacetal (−)‐ 57 of methyl 3,5‐di‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐D ‐glycero‐D ‐galacto‐hepturonate (see Schemes 7 and 8). Hydrolysis of (−)‐ 57 provides methyl 3,5‐di‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐D ‐glycero‐D ‐galacto‐hepturonate 48 that undergoes highly diastereoselective Nozaki‐Oshima condensation with the aluminium enolate resulting from the conjugate addition of Me₂AlSPh to (1S,5S,6S,7S)‐7‐endo‐(benzyloxy)‐6‐exo‐{[(tert‐butyl)dimethylsilyl]oxy}‐8‐oxabicyclo[3.2.1]oct‐3‐en‐2‐one ((−)‐ 13 ) derived from (+)‐ 5 (Scheme 12). This generates a β‐C‐mannopyranoside, i.e., methyl (7S)‐3,5‐di‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐7‐C‐[(1R,2S,3R,4S,5R,6S,7R)‐6‐endo‐(benzyloxy)‐7‐exo‐{[(tert‐butyl)dimethylsilyl]oxy}‐4‐endo‐hydroxy‐2‐exo‐(phenylthio)‐8‐oxabicyclo[3.2.1]oct‐3‐endo‐yl]‐L ‐glycero‐D ‐manno‐heptonate ((−)‐ 70 ; see Scheme 12), that is converted into the diethyl dithioacetal (−)‐ 75 of methyl 3‐O‐acetyl‐2,6‐anhydro‐4,5‐dideoxy‐4‐C‐{[methyl (7S)‐3,5,7‐tri‐O‐acetyl‐2,6‐anhydro‐4‐O‐benzoyl‐L ‐glycero‐D ‐manno‐heptonate]‐7‐C‐yl}‐5‐C‐(phenylsulfonyl)‐L ‐glycero‐D ‐galacto‐hepturonate ( 76 ; see Scheme 13). Repeating the Nozaki‐Oshima condensation to enone (−)‐ 13 and the aldehyde resulting from hydrolysis of (−)‐ 75 , a (1→3)‐C,C‐linked trisaccharide precursor (−)‐ 77 is obtained.     

O‐Ethyl and O‐methyl N‐(2,3,4,6‐tetra‐O‐acetyl‐β‐d‐glucopyranosyl)thiocarbamate

In both the title structures, O‐ethyl N‐(2,3,4,6‐tetra‐O‐acetyl‐β‐d ‐gluco­pyran­osyl)­thio­carbam­ate, C₁₇H₂₅NO₁₀S, and O‐methyl N‐(2,3,4,6‐tetra‐O‐acetyl‐β‐d ‐gluco­pyran­osyl)­thiocar­bam­ate, C₁₆H₂₃NO₁₀S, the hexo­pyran­osyl ring adopts the ⁴C₁ conformation. All the ring substituents are in equatorial positions. The acetoxy­methyl group is in a gauche–gauche conformation. The S atom is in a synperi­planar conformation, while the C—N—C—O linkage is antiperiplanar. N—H?O intermolecular hydrogen bonds link the mol­ecules into infinite chains and these are connected by C—H?O interactions.     

Zn‐ and Cd‐based Coordination Polymers Offering H‐Bonding Cavities: Highly Selective Sensing of S2O72− and Fe3+ Ions

We present two Zn^II‐ and Cd^II‐based coordination polymers (CPs), L ‐Zn and L ‐Cd , offering H‐bonding‐based cavities of varying dimensions. Both CPs were used for the highly selective detection of S₂O₇^2? and Fe³⁺ ions where H‐bonding based cavities played an important role. Fluorescence quenching, competitive binding studies and binding parameters substantiated significant recognition of S₂O₇^2? and Fe³⁺ ions by both CPs.     

Influence of substituents in the salicylaldehyde‐derived Schiff bases on vanadium‐catalyzed asymmetric oxidation of sulfides

A series of chiral Schiff bases ( L ¹ – L ⁵ ) with different substituents in the salicylidenyl unit were prepared from condensation of 3‐aryl‐5‐ tert ‐butylsalicylaldehyde derivatives and optically active amino alcohols. Bromination of 3‐phenyl‐5‐ tert ‐butylsalicylaldehyde gave an unexpected product 3‐(4‐bromophenyl)‐5‐bromosalicylaldehyde, from which the corresponding Schiff base ligands L ⁶ and L ⁷ , derived from (S)‐valinol and (S)‐ tert ‐leucinol, respectively, were prepared. Ligands L ¹ – L ⁷ were applied to the vanadium‐catalyzed asymmetric oxidation of aryl methyl sulfides. Under the optimal conditions, the oxidation of the thioanisole with H₂O₂ as oxidant in CH₂Cl₂ catalyzed by VO(acac)₂‐ L ¹ – L ⁷ gives good yields (74–83%) with moderate enantioselectivity (58–77% ee). Ligand L ⁷ , containing a 4‐bromophenyl group on the 3‐position and a Br atom on the 5‐position of the salicylidenyl moiety, displays an 80–90% ee for vanadium‐catalyzed oxidation of methyl 4‐bromophenyl sulfide and methyl 2‐naphthyl sulfide. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of N‐Substituted (3S,4S)‐ and (3R,4R)‐Pyrrolidine‐3,4‐diols: Search for New Glycosidase Inhibitors

N‐Substituted (3S,4S)‐ and (3R,4R)‐pyrrolidine‐3,4‐diols 9 and 10 , respectively, were derived from (+)‐L ‐ and (?)‐D ‐tartaric acid, respectively. Compounds 9k, 9l , and 9m with the N‐substituents, BnNH(CH₂)₂, 4‐PhC₆H₄CH₂NH(CH₂)₂ and 4‐ClC₆H₄CH₂NH(CH₂)₂, respectively, showed modest inhibitory activities toward α‐D ‐amyloglucosidases from Aspergillus niger and from Rhizopus mold (Table 1). Unexpectedly, several (3R,4R)‐pyrrolidine‐3,4‐diols 10 showed inhibitory activities toward α‐D ‐mannosidases from almonds and from jack bean (Table 3). N‐Substitution by the NH₂(CH₂)₂ group, i.e., 10g , led to the highest potency.     

Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.