声学超构材料

2000年报道的具有局域共振带隙的声学材料是声学超构材料的前身,也是最早实现的声学超构材料.同光学、电磁超构材料一样,近年来声学超构材料也引起了许多学者的研究兴趣.文章介绍了到目前为止声学超构材料的主要研究进展,内容包括含共振单元的声学超构材料的负有效声学参数（包括质量密度、体模量等）的实现,以及不含共振单元的声学超构材料的一些有效声学参数的确定等,最后对声学超构材料的可能应用进行了简单展望.     

声学超材料与超表面研究进展

声学超材料是一种人工设计结构的材料,具有超越自然界材料行为的特性,如负折射、反常多普勒效应、平面聚焦等.本文主要介绍了声学超材料近二十年来的相关研究进展,重点论述了超原子声学超材料、超分子声学超材料、超原子簇和超分子簇声学超材料.最后简要介绍了近五年来声学超表面的研究概况和发展趋势.     

新型负模量声学超结构的低频宽带机理研究

提出了一种具有负模量特性的新型声学超结构,并揭示了其低频带隙的形成及拓宽机理.通过理论推导给出了该新型结构的归一化有效模量表达式,由于有效模量的零值点与系统参数密切相关,可以调节合适的参数使得零值点降低或带隙下界降低,进一步实现低频带隙.理论结果表明,在一定的频率范围内,系统的弹性模量为负且负模量区域进一步拓宽,从而通过负模量区域的放大而拓宽带隙.这种新的实现低频带隙的方法克服了传统局域共振附加质量过大及惯性放大结构带隙较窄的缺点.同时,通过有限元法得到的周期结构的传输率随着结构参数的变化趋势与理论分析的变化趋势基本一致,并得到了约40—180 Hz的低频宽带.这种实现低频带隙的新思路对低频声波的控制具有很重要的理论指导意义.     

基于声学超材料的低频可调吸收器

在当今社会,噪声污染已经成为人类健康的一大威胁,如何有效地控制和消除噪声污染一直是科研领域的一个重要话题.本文以开口环嵌套结构为模型,设计并制备了一种声学超材料.通过理论分析、数值模拟和实验测试,发现由于模型内部空腔的强烈耦合共振效应,该超材料可以在低频区域实现接近完美的吸声效应.此外,通过简单地绕轴旋转其内腔开口方向,即可改变该超材料的相对阻抗值,进而在较宽的频带范围内实现对吸收峰位置的可调控制.由于该超材料具有深亚波长的尺寸,因此非常有利于低频吸声器件的小型化和集成化,同时该模型也为宽带吸收器的设计奠定了基础.     

空间盘绕型声学超材料的亚波长拓扑谷自旋态

声子晶体的Dirac线性色散关系,使其具有奇特的声拓扑特性,在声波控制领域具有良好的应用前景.目前,声子晶体的拓扑边缘态主要基于Bragg散射所产生的能带结构,难以实现低频声波的受拓扑保护单向边缘传输.本文引入空间盘绕结构,设计了具有C_(3v)对称性的空间盘绕型声学超材料,并研究其布里渊区高对称点(K/K'点)的亚波长Dirac锥形线性色散.接着,通过旋转打破空间盘绕型声学超材料的镜像对称性,使其Dirac简并锥裂开而产生亚波长拓扑相变和亚波长拓扑谷自旋态.最后,采用拓扑相位互逆的声学超材料构造拓扑界面,实现声拓扑谷自旋传输.空间盘绕型声学超材料的亚波长Dirac线性色散与亚波长拓扑谷自旋态突破了声子拓扑绝缘体的几何尺寸限制,为声拓扑稳健传输在低频段的应用提供理论基础.     

声子晶体和声学超构材料

声子晶体和声学超构材料进一步拓展了自然界中声学材料的弹性波性质.这种人工的复合结构材料,由于其周期结构的布拉格散射和局域共振特性,使得其具有奇异的色散特征,在某些频段具有负的有效弹性参数,带来了许多新颖的声学传播效应,例如声子带隙效应、负折射效应、超棱镜效应、超透镜效应、异常透射效应、异常隔声效应等.与此同时,在声子晶体和声学超构材料表面,一类具有亚波长特性的声表面倏逝波也引起了人们的关注,研究其激发、传播、耦合的过程对揭示声子晶体和声学超构材料的奇异声传播效应的物理本质具有重要意义.声子晶体和声学超构材料作为一类新型的人工声学结构材料,在隔声、防振、热控制以及新型声学器件研发等方面具有巨大的应用前景.文章综述了近十几年来国际国内关于声子晶体和声学超构材料的研究进展,并对其未来的研究发展方向做一评述.     

暗声学超材料研究

由于普通材料的固有耗散在低频区域的微弱性,长久以来,低频声波的衰减一直都是一个颇具挑战性的任务.为了能够在100—1000Hz范围内完全吸收某些频率的低频声波,文章作者设计了一种薄膜型的暗声学超材料样品:它是由在弹性薄膜上镶嵌有一些非对称性的硬质金属片而制成.实验表明,该样品在低频区域几乎能够百分之百地吸收声波,而在共振吸收频率处,空气中的声波波长要比薄膜的厚度大3个数量级以上.当共振发生时,硬质金属片的"拍动"导致很大的弹性曲率能量聚集在金属片的边界附近.由于薄膜的拍动模式与声波的辐射模式仅存在微弱的耦合作用,而弹性薄膜的整体能量密度又比入射声波的能量密度大2—3个数量级,该样品本质上是一个开放的共振腔,这也是它能够高效地吸收低频声波的原因所在.     

经典局域共振型水声超材料的吸隔声性能研究*

基于水声超材料吸声机理和多层平行介质平面波理论,建立局域共振型水声超材料结构,通过COMSOL进行建模计算,研究该结构的吸声性能机理,此外为了验证钢背衬的隔声性能,在该水声超材料结构基础上添加一层0.005m厚的钢背衬进行仿真对比。研究结果表明,在频段为200Hz-4000Hz时,水声超材料声学性能较好,吸声性能整体较优,且添加钢背衬的水声超材料隔声性能较优,甚至在某频率点达到15dB的隔声差值;此外通过位移场图进一步揭示水声超材料的吸声机理,发现水声超材料结构的位移场和钢背衬都对吸声性能会产生影响,钢背衬通过影响共振吸收来影响吸声性能,而位移场则通过位移幅度大小影响吸声性能。     

一种具有动态磁负刚度薄膜声学超材料的低频隔声特性

为提升薄膜/板状结构的低频隔声特性,本文提出一种具有动态磁负刚度的新型准零刚度薄膜声学超材料.首先,应用等效磁荷理论推导了动态磁负刚度;然后,基于伽辽金法建立了有限尺寸下薄膜/板结构的隔声理论模型.通过理论分析、数值仿真及实验测试相结合的方法,从结构模态、振动模式、平均速度、相位曲线、等效质量密度和等效弹簧-质量动力学模型等多个角度对其低频(1—1000 Hz)隔声机理开展了研究.结果表明:在初始薄膜张力一定时,减小磁间隙或增大剩余磁通密度均可增大动态磁负刚度,进而减小隔声峰值频率,增加隔声带宽,实现了较宽频段下的有效低频隔声;进一步,当磁间隙大于第二临界磁间隙小于第一临界磁间隙时,结构的一阶模态共振消失,对应隔声谷值大幅提升,显示出超宽频段的隔声效果.这种利用动态磁负刚度改善模态共振导致的低频隔声谷值的方法对薄膜/板型低频隔声超材料的设计具有重要的理论指导价值.     

薄膜型声学超材料的结构设计与隔声特性

为探讨薄膜型声学超材料用于汽车前围声学包、提高其中低频隔声能力的可行性,设计一种米字摆臂多质量块薄膜型声学超材料,构建其隔声分析有限元模型,分析其隔声特性及影响因素,开展结构优化及其在汽车前围声学包上的应用探索。研究表明,所设计的薄膜型声学超材料单胞在中低频区域具有较宽的隔声频带;增加薄膜上质量块半径或厚度会使传声损失曲线整体向低频区域移动,且质量块半径的增加还会拓宽高频区域的隔声频带;增加薄膜厚度或预应力会使传声损失曲线整体向高频区域移动;优化后的薄膜型声学超材料与钢板组合应用于汽车前围板,可明显提高其中低频隔声能力。     

Acoustic scattering from a submerged cylindrical shell coated with locally resonant acoustic metamaterials

Using the multilayered cylinder model, we study acoustic scattering from a submerged cylindrical shell coated with locally resonant acoustic metamaterials, which exhibit locally negative effective mass densities. A spring model is introduced to replace the traditional transfer matrix, which may be singular in the negative mass region. The backscattering form function and the scattering cross section are calculated to discuss the acoustic properties of the coated submerged cylindrical shell.     

Compressibility-near-zero acoustic metamaterial

This letter theoretically analyzes and experimentally demonstrates a novel class of compressibility-near-zero (CNZ) acoustic metamaterials, achieved by using resonant-type metamaterials, namely the Helmholtz resonator. We first present a closed analytical formula for the effective compressibility of the proposed unit cell and then show that two frequencies exist which may support CNZ propagation. We demonstrate how the choice of the actual operating CNZ frequency depends on the properties of the host and finally experimentally verify CNZ propagation of acoustic waves.     

An acoustic bending waveguide designed by anisotropic density-near-zero metamaterial

Anisotropic metamaterial with only one component of the mass density tensor near zero(ADNZ) is proposed to control the sound wave propagation. We find that such an anisotropic metamaterial can be used to realize perfect bending waveguides. According to a coordinate transformation, the surface waves on the input and output interfaces of the ADNZ metamaterial induces the sound energy flow to be redistributed and match smoothly with the propagating modes inside the metamaterial waveguide. According to the theory of bending waveguide, we realize the "T"-type sound shunting and convergence, as well as acoustic channel selection by embedding small-sized defects. Numerical calculations are performed to confirm the above effects.     

Numerical study of a near-zero-index acoustic metamaterial

This Letter studies a two-dimensional, membrane-based acoustic metamaterial with a near-zero refractive index. It yields a frequency-dependent effective density that is near-zero at a narrow frequency band centered around its first resonant frequency. This effective density results in its near-zero refractive index. Numerical simulations are shown which demonstrate that the phase in this metamaterial undergoes small changes, and the metamaterial functions as an angular filter such that only a wave with a near-zero incident angle can transmit. Its ability to tailor acoustic phase pattern is also discussed in this Letter.     

Locally resonant acoustic metamaterials with 2D anisotropic effective mass density

A two-dimensional (2D) lattice model with anisotropic resonant microstructures is found to provide an anisotropic band gap structure. A 2D continuum with anisotropic effective mass density is introduced to represent this lattice system. Two methods are proposed to derive the equivalent continuum. In the first method, the effective mass density of the equivalent continuum is obtained by matching the dispersion relations for harmonic waves propagating in the principal directions. The second approach employs an approximate estimation of the effective mass density by volume-averaging an effective mass that represents the resonant microstructure. For both equivalent continuum models, the effective mass density is frequency-dependent and may become negative in certain frequency ranges. Subsequently, the effective mass density of the equivalent continuum assumes the form of a second-order tensor. Thus, it suffices to determine the effective mass density tensor with respect to the principle directions. It is shown numerically that the local-resonance effect is accurately described by the equivalent continuum model. In addition, the effect of anisotropic mass density on wave propagation is numerically illustrated and discussed.     

A broadband planar acoustic metamaterial lens

Based on quasi-conformal mapping approach, we propose a two-dimensional broadband and low-loss planar lens in the acoustic regime, which can be realized using gradient-index sub-wavelength artificial structures with hard boundary. In this design, QCM is employed in the acoustic regime to convert a parabolic form into a planar one, which makes the resultant material approximately isotropic through minimizing the anisotropic factor. It is found that the planar lens can show the same performance as its parabolic counterparts over a broadband range of frequency. Moreover, the lens is fabricated via 3D printing technology and measured experimentally, which gives identical results with the theoretical prediction. The proposed technique could be extended to realize different acoustic devices and applied for a series of practical applications.     

Theoretical demonstration of the hybrid focusing points of sonic crystal flat lenses and possible applications

We demonstrate the hybrid focusing points of sonic crystals for a multi-source array applied to flat sonic crystal lenses. The contributions of different point source couples form hybrid focusing points. Ray-trace analyses are conducted for acoustic flat lenses with multi-source configurations. The finite-difference time-domain (FDTD) simulation of flat lenses with multi-source configurations demonstrates the establishment of pure and hybrid focusing points in a pyramidal constellation. The number of focusing points in the pyramidal constellation depends on the number of point sources. We propose an acoustic device for fine-tuning the location of a far-field hybrid focusing point and discuss its benefits for acoustic energy focusing application.     

同时实现介电常数和磁导率为负的H型结构单元左手材料

基于用一种结构同时实现材料介电常数和磁导率为负的思想，提出了H型结构单元左手材料模型.采用矩形波导法测试表明，H型结构单元在微波频率范围出现左手透射峰，并且可以由参数t对左手特性区域进行调控.同时利用相位法、棱镜折射法和散射参量法从实验和理论证明了在左手透射峰区域材料的折射率为负值，介电常数和磁导率亦同时为负.相对由金属开口谐振环与金属线两种结构组合实现的左手材料，H型结构集磁谐振与电谐振于一体，结构简单、制备方便，对微波器件左手材料表现出更多的优越性.