Copper perchlorate hexahydrate: a highly efficient catalyst for the cyanosilylation of aldehydes

Cu(ClO₄)₂·6H₂O has been found to be an efficient catalyst for cyanosilylation reaction of aldehydes in THF at room temperature with low catalytic loading (1.0 mol%) in short reaction time (mostly within 10 min). Copyright © 2008 John Wiley & Sons, Ltd.     

Gold-catalyzed cyanosilylation reaction: homogeneous and heterogeneous pathways

Gold had been considered to be an extremely inert metal, but recently it was found that nanometer-sized gold particles on metal-oxide supports acted as catalysts for simple organic reactions, such as oxidation and hydrogenation, even at or below room temperature. Herein, we report that gold nanoparticles (AuNPs) of zero oxidation state (Au0) are catalytically active for a C--C bond-forming reaction, the cyanosilylation of aldehydes. The AuNP-catalyzed cyanosilylation proceeded smoothly at room temperature with 0.2 wt % loading of AuNPs. The reactions of aromatic aldehydes were almost quantitative, except for benzaldehyde derivatives containing the electron-withdrawing NO2 group, and alpha,beta-unsaturated aromatic aldehydes were the most reactive substrates. The reactions also went smoothly for aliphatic aldehydes. Mechanistic studies indicated that the reactions proceeded both homogeneously and heterogeneously: homogeneous catalysis by leached gold species and heterogeneous catalysis by the adsorption of the reactants (aldehydes and trimethylsilyl cyanide) onto AuNPs. The ratio of homogeneous and heterogeneous catalysis was estimated to be approximately 4:1.     

Lithium chloride: an active and simple catalyst for cyanosilylation of aldehydes and ketones

LiCl acts as a highly effective catalyst for cyanosilylation of various aldehydes and ketones to the corresponding silylated cyanohydrins. The reaction proceeds smoothly with a substrate/catalyst molar ratio of 100-100,000 at 20-25 degrees C under solvent-free conditions. alpha,beta-Unsaturated aldehydes are completely converted to the 1,2-adducts. The cyanation products can be isolated by direct distillation of the reaction mixture.     

Solvent‐free cyanosilylation of aldehydes catalyzed by SmI2

A novel method to obtain racemic cyanohydrin silylethers by reaction of trimethylsilyl cyanide with a variety of aldehydes promoted by catalysis of SmI₂ is reported. The corresponding cyanosilylethers were obtained in high yields (up to 99%) in solvent‐ free conditions at room temperature within a relatively short time using 0.01–0.5 mol% catalyst loadings. Copyright © 2007 John Wiley & Sons, Ltd.     

Enantioselective cyanosilylation of aldehydes catalyzed by Mn(salen) complex/triphenyl phosphine oxide

The activation of chiral Mn(salen) complexes with Ph₃PO has been found to provide a good strategy for the asymmetric cyanosilylation of aldehydes. Aromatic aldehydes have been converted into the corresponding cyanohydrin trimethylsilylether in yields up to 95% and ee up to 67% using 0.25 mol% chiral Mn(salen) complex in combination with 10 mol% of achiral Ph₃PO as additive. Copyright © 2007 John Wiley & Sons, Ltd.     

TBD-catalyzed cyanosilylation of aldehydes and ketones

This study examines the catalytic efficacy of 1,5,7-triazabicyclo[4,4,0]dec-5-ene (TBD) in the cyanosilylation of aldehydes and ketones. In an aldehyde reaction, the corresponding products were obtained at high yield using minimal TBD (0.01?mol%). TBD was similarly effective in various ketone reactions.     

Vanadyl salen complexes covalently anchored to an imidazolium ion as catalysts for the cyanosilylation of aldehydes in ionic liquids

Two vanadyl salen complexes having peripheral styryl substituents have been reacted with 1-methyl-3-(3-mercaptopropyl)-imidazolium chloride using azoisobutyronitrile as radical initiator. The resulting compounds contain at the same time a vanadyl salen complex and one imidazolium cation. In agreement with the expectations in view of their structure, these compounds were insoluble in conventional organic solvents, but completely miscible in imidazolium ionic liquids. These vanadyl salen complexes bonded to an imidazolium cation are highly active and reusable catalysts for the cyanosilylation of aldehydes. Moderate enantiomeric excesses were obtained using the chiral version of this complex.     

Layered double hydroxides (LDHs): As efficient heterogeneous catalyst for the cyanosilylation of aromatic aldehydes

We report the first application of Layered Double Hydroxides (LDHs) as efficient and novel heterogeneous catalyst for the cyanosilylation of aldehydes with excellent yields and simple work up. The reaction between different aldehydes with electron-withdrawing and releasing groups and trimethylsilyl cyanide (TMSCN) proceeds in dry CH₂Cl₂ at room temperature in the presence of Mg-Al-Cu LDH. The catalyst recycled and reused for four times without loss of catalytic activity. The structures of all compounds were corroborated spectroscopically (¹H- and ¹³C-NMR, and elemental analysis). A plausible mechanism for this type of reaction is proposed.     

Temperature-induced Sn(Ⅱ) supramolecular isomeric frameworks as promising heterogeneous catalysts for cyanosilylation of aldehydes

Two novel Sn(Ⅱ) supramolecular isomeric frameworks,with the identical formula of {(NH2Me2)2[Sn(BDC)(SO4)]}n,Sn-CP-1-α(1) and Sn-CP-1-β(2)(H2BDC=terephthalic acid) were synthesized under solvothermal condition and fully characterized by single crystal X-ray diffraction(SCXRD),Fourier transform infrared spectroscopy(FTIR),ultraviolet-visible spectroscopy(UVVis),elemental analyses,and thermogravimetric analysis(TGA).Interestingly,the structures of 1 and 2 are governed by the temperature of the reaction,suggesting a temperature-induced supramolecular isomerism.The supramolecular isomers are primarily caused by the different bridging alignments of SO42–.Compounds 1 and 2 display 2 D layer and 3 D framework with different topologies,non-interpenetrated 44-sql and two-fold interpenetrated 4-connected dia topology,respectively.Due to Lewis acid properties of coordinatively unsaturated Sn(Ⅱ) sites in CPs,they have been utilized as heterogeneous catalyst for the cyanosilylation of aldehydes with an excellent conversion yield over 99% under solvent-free conditions.     

Binolam-AlCl: a two-centre catalyst for the synthesis of enantioenriched cyanohydrin O-phosphates

The enantioselective synthesis of cyanohydrin O‐phosphates by using in situ generated bifunctional catalysts (R)‐ or (S)‐3,3′‐bis(diethylaminomethyl)‐1,1′‐binaphthol–aluminium chloride (binolam–AlCl) is reported. The reaction, which can be described as an overall cyano‐O‐phosphorylation of aldehydes, has a wide scope and applicability. Evidence is also provided, including ab initio and DFT calculations, in support of supported by the Lewis acid/Brønsted base (LABB) dual role of the catalyst in inducing first the key enantioselective hydrocyanation, which is then followed by O‐phosphorylation. A brief screening of the synthetic usefulness of the resulting cyanohydrin O‐phosphates unveiles some interesting applications. Among them, chemoselective hydrolysis, reduction and palladium‐catalysed nucleophilic allyl substitution, thereby leading to enantiomerically enriched α‐O‐phosphorylated α‐hydroxy esters, β‐amino alcohols and γ‐cyanoallyl alcohols, respectively. Naturally occurring (?)‐tembamide and (?)‐aegeline are synthesised accordingly.     

Enantioselective cyanosilylation of ketones by a catalytic double-activation method with an aluminium complex and an N-oxide

Double-activation catalysis promises high catalytic efficiency in the enantioselective cyanosilylation of ketones through the combined use of a Lewis acid and a Lewis base. Catalyst systems composed of a chiral salen-Al complex and an N-oxide have high catalytic turnovers (200 for aromatic ketones, 1000 for aliphatic ones). With these catalysts, a wide range of aliphatic and aromatic ketones were converted under mild conditions into tertiary cyanohydrin O-TMS ethers in excellent yields and with high enantioselectivities (94% ee for aromatic ketones, 90% ee for aliphatic ones). Preliminary mechanistic studies revealed that the salen-Al complex played the role of a Lewis acid to activate the ketone and the N-oxide that of a Lewis base to activate TMSCN; that is, double activation.     

Germylene Cyanide Complex: A Reagent for the Activation of Aldehydes with Catalytic Significance

The first example of a germanium(II) cyanide complex [GeCN(L)] ( 2 ) (L=aminotroponiminate (ATI)) has been synthesized through a novel and relatively benign route that involves the reaction of a digermylene oxide [(L)Ge?O?Ge(L)] ( 1 ) with trimethylsilylcyanide (TMSCN). Interestingly, compound 2 activates several aldehydes (RCHO) at room temperature and results in the corresponding cyanogermylated products [RC{OGe(L)}(CN)H] (R=H 3 , iPr 4 , tBu 5 , CH(Ph)Me 6 ). Reaction of one of the cyanogermylated products ( 4 ) with TMSCN affords the cyanosilylated product [(iPr)C(OSiMe₃)(CN)H] ( 7 ) along with [GeCN(L)] quantitatively, and insinuates the possible utility of [GeCN(L)] as a catalyst for the cyanosilylation reactions of aldehydes with TMSCN. Accordingly, the quantitative formation of several cyanosilylated products [RC(OSiMe₃)(CN)H] ( 7 – 9 ) in the reaction between RCHO and TMSCN by using 1 mol % of [GeCN(L)] as a catalyst is also reported for the first time.     

Highly active bifunctional salenTi(IV) catalysts for asymmetric cyanosilylation of aldehydes and TMSCN

A novel enantiopure salen ligand bearing a diphenylphosphine oxide on the 3-position of one aromatic ring was synthesized and combined with Ti(Oi-Pr)₄ as a monometallic bifunctional catalyst for asymmetric cyanosilylation reaction of aldehydes with trimethylsilyl cyanide (TMSCN). The catalyst system exhibited excellent activity and moderate enantioselectivity. The addition of TMSCN to 4-nitrobenzaldehyde in the presence of 1 mol% catalyst loading could complete within 10 min at ambient temperature. An intramolecularly cooperative catalysis was observed in this system wherein the central metal Ti(IV) is suggested to play a role of Lewis acid to activate aldehydes while the appended diphenylphosphine oxide worked as Lewis base to activate TMSCN.     

A mild and efficient cyanosilylation of ketones catalyzed by a Lewis acid-Lewis base bifunctional catalyst

A new family of bifunctional catalysts (N-oxides-Ti(OⁱPr)₄ (2:1)) containing a Lewis acid and a Lewis base was developed and applied to the catalytic cyanosilylation of ketones. Utilizing rac((1R,2S) and (1S,2R))-1-(2′-pyridylmethyl)-2-diphenylhydroxymethylpyrrolidine N-oxide-titanium (2:1) complex and N-benzyl-diethanolamine N-oxide-titanium (2:1) complex as catalysts, the cyanosilylation products were obtained in 42-97% yield. Based on experimental phenomena and kinetic studies, a catalytic cycle was proposed to explain the remarkable activities of these catalysts. Investigations indicated that rac((1R,2S) and (1S,2R))-1-(2′-pyridylmethyl)-2-diphenylhydroxymethylpyrrolidine N-oxide-titanium (2:1) complex and N-benzyl-diethanolamine N-oxide-titanium (2:1) complex should promote the reaction via a dual activation of the ketone by the titanium and TMSCN by the N-oxide.     

CopperII phthalocyanine as an efficient and reusable catalyst for the N-arylation of nitrogen containing heterocycles

Copper phthalocyanine (Cu^IIPc) was found to be an efficient catalyst for the catalyzed N-arylation of NH heterocycles with aryl iodides and bromides under mild reaction conditions. A variety of hindered and functionalized NH heterocycles and aryl halides were successfully used as the substrates for the given catalytic reaction and were transformed in good to excellent yields.     

Interaction of nitric oxide with cobalt(II) phthalocyanine: kinetics, equilibria and electrocatalytic studies

The coordination of nitric oxide (NO) to cobalt(II) phthalocyanine (CoPc) in dimethyl sulphoxide (DMSO) has been studied. CoPc coordinates with NO in a 1:1 ratio, forming a CoPc(NO) species. The IR band observed at 1680 cm⁻¹ is assigned to the coordinated NO. In the presence of excess NO, pseudo first order kinetics were followed. The observed rate constant, k_f, was determined to be 15.0±0.3 dm⁻³ mol⁻¹ s⁻¹ and the equilibrium constant was K=5.4±0.4×10⁴dm³ mol⁻¹. Solution or adsorbed CoPc catalyses the reduction of NO. The products of reduction include NH₃ and NH₂OH.