Determination of catecholamine in human serum by a fluorescent quenching method based on a water-soluble fluorescent conjugated polymer-enzyme hybrid system

In this paper, a sensitive water-soluble fluorescent conjugated polymer biosensor for catecholamine (dopamine DA, adrenaline AD and norepinephrine NE) was developed. In the presence of horse radish peroxidase (HRP) and H(2)O(2), catecholamine could be oxidized and the oxidation product of catecholamine could quench the photoluminescence (PL) intensity of poly(2,5-bis(3-sulfonatopropoxy)-1,4-phenylethynylenealt-1,4-poly(phenylene ethynylene)) (PPESO(3)). The quenching PL intensity of PPESO(3) (I(0)/I) was proportional to the concentration of DA, AD and NE in the concentration ranges of 5.0 × 10(-7) to 1.4 × 10(-4), 5.0 × 10(-6) to 5.0 × 10(-4), and 5.0 × 10(-6) to 5.0 × 10(-4) mol L(-1), respectively. The detection limit for DA, AD and NE was 1.4 × 10(-7) mol L(-1), 1.0 × 10(-6) and 1.0 × 10(-6) mol L(-1), respectively. The PPESO(3)-enzyme hybrid system based on the fluorescence quenching method was successfully applied for the determination of catecholamine in human serum samples with good accuracy and satisfactory recovery. The results were in good agreement with those provided by the HPLC-MS method.     

表面活性剂对共轭聚合物荧光性质及电荷转移的影响

探讨了表面活性剂存在下, 水溶性阴离子共轭聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](简写为MPS-PPV)的微环境变化对荧光性质及电荷转移的影响. 结果表明, 阳离子表面活性剂及非离子表面活性剂使MPS-PPV荧光增强, 阴离子表面活性剂使其荧光先增强后减弱; 在MPS-PPV/表面活性剂体系中加入电子接受体Pd^2＋, 发现非离子表面活性剂体系的荧光猝灭效率提高, 阴离子及阳离子表面活性剂体系荧光猝灭效率下降. 此研究对研制基于阴离子共聚物的新型生物化学传感器具有一定的指导意义.     

Interactions between hairy rod anionic conjugated polyelectrolytes and nonionic alkyloxyethylene surfactants in aqueous solution: observations from cloud point behaviour

The effect of three anionic, hairy-rod fluorene based conjugated polyelectrolytes on the cloud points of the alkyloxyethylene surfactants C10E3, C12E4, C12E5, and C12E6 has been studied in aqueous solution. Although the association behaviour of these rigid polymers with surfactants is different from that of more flexible polyelectrolytes, both types of polymers are seen to increase the cloud points, probably as a consequence of associative interactions. The possible importance of Coulombic interactions is suggested by the decrease in cloud points with these systems in the presence of NaCl. With the conjugated polyelectrolytes, the effect appears to be most pronounced with poly[9,9-bis(4-phenoxybutylsulfonate)fluorene-co-2,5-thienylene], which may result from specific interactions between oxyethylene groups and the thiophene ring. The value of cloud point behaviour in designing water based formulations for preparation of devices of these conjugated polyelectrolytes is discussed.     

Modulating the emission intensity of poly-(9,9-bis(6'-N,N,N-trimethylammonium)hexyl)-fluorene phenylene) bromide through interaction with sodium alkylsulfonate surfactants

The interaction between the cationic HTMA-PFP (Poly-(9,9-bis(6'-N,N,N-trimethylammonium)hexyl-fluorene phenylene) bromide) and oppositely charged sodium n-alkyl sulfonate surfactants of different chain lengths has been studied in DMSO-water solutions (4% v/v) by UV-visible absorption, fluorescence spectroscopy, fluorescence lifetimes, electrical conductivity, and (1)H NMR spectroscopy. Polymer-surfactant interactions lead to complex spectroscopic behaviors which depends on surfactant concentration. At low surfactant concentrations, the observed strong static fluorescence quenching of fluorescence seems to be associated with formation of aggregates between polymer chains neutralized through interaction with surfactants. This is supported by conductivity and by analysis of absorption spectra deconvoluted at each surfactant concentration using an adapted iterative method. In contrast, above the surfactant critical micelle concentration, there is a strong fluorescence enhancement, leading in some cases to higher intensities than in the absence of surfactants. This is attributed to the transformation of the initially formed aggregates into some new aggregate species involving surfactant and polymer. These changes in HTMA-PFP fluorescence as a function of n-alkyl sulfonate concentration are important for the general understanding of polymer-surfactant interactions, and the aggregates formed may be important as novel systems for applications of these conjugated polyelectrolytes.     

Conjugated polyelectrolytes with pH-dependent conformations and optical properties

We report here the synthesis and characterization of two new conjugated polymers: poly{2,5-bis[3-(N,N-diethylammonium acetate)-1-oxapropyl]-1,4-phenylenevinylene} (P1') and poly{2,5-bis[3-(N,N,N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene} (P2). Both polymers exhibit unique pH-dependent optical properties in aqueous solution. These pH-dependent optical properties are attributed to the mutual electrostatic repulsions of positive charges pendent on the benzene rings. This electrostatic repulsion leads to an increased or decreased torsional angle in the conjugated backbone, thus affecting the effective conjugation length of these polymers. The UV-vis spectra of P1 in various pH solutions exhibit a near-isosbestic point, which indicates changes in the composition of the two distinct conformations (the charged and the neutral forms). The transition between the highly charged state and the neutral state was clearly observed in the UV-vis and photoluminescence studies on both P1 and P2. This transition is particularly sensitive in the pH range from 6.2 to 7.0, a range that would allow the detection of minor environmental changes. P2 has a quantum efficiency of 14% in water, which is considered to be relatively high among water-soluble PPVs.     

Amplified quenching of a conjugated polyelectrolyte by cyanine dyes

The conjugated polyelectrolyte PPESO3 features a poly(phenylene ethynylene) backbone substituted with anionic 3-sulfonatopropyloxy groups. PPESO3 is quenched very efficiently (KSV > 10(6) M(-1)) by cationic energy transfer quenchers in an amplified quenching process. In the present investigation, steady-state and picosecond time-resolved fluorescence spectroscopy are used to examine amplified quenching of PPESO3 by a series of cyanine dyes via singlet-singlet energy transfer. The goal of this work is to understand the mechanism of amplified quenching and to characterize important parameters that govern the amplification process. Steady-state fluorescence quenching of PPESO3 by three cationic oxacarbocyanine dyes in methanol solution shows that the quenching efficiency does not correlate with the Forster radius computed from spectral overlap of the PPESO3 fluorescence with the cyanines' absorption. The quenching efficiency is controlled by the stability of the polymer-dye association complex. When quenching studies are carried out in water where PPESO3 is aggregated, changes observed in the absorption and fluorescence spectra of 1,1',3,3,3',3'-hexamethylindotricarbocyanine iodide (HMIDC) indicate that the polymer templates the formation of a J-aggregate of the dye. The fluorescence dynamics in the PPESO3/HMIDC system were probed by time-resolved upconversion and the results show that PPESO3 to HMIDC energy transfer occurs on two distinctive time scales. At low HMIDC concentration, the dynamics are dominated by an energy transfer pathway with a time scale faster than 4 ps. With increasing HMIDC concentration, an energy pathway with a time scale of 0.1-1 ns is active. The prompt pathway (tau < 4 ps) is attributed to quenching of delocalized PPESO3 excitons created near the HMIDC association site, whereas the slow phase is attributed to intra- and interchain exciton diffusion to the HMIDC.     

Photoluminescence spectra of a conjugated polymer: from films and solutions to single molecules

The purpose of this work is to address the issue of applicability of single-molecule spectroscopy (SMS) results for conjugated polymers to "bulk" samples, e.g. conjugated polymer films. Also, some apparent inconsistencies in the literature on SMS regarding the photoluminescence spectral position of conjugated polymers are discussed. We present a series of photoluminescence spectra of thin films of the conjugated polymer poly(2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene-vinylene) (MEH-PPV) with a wide range of varying thickness. The thickness was varied from approximately 20 nm to the value corresponding to well-separated single molecules (SMS sample). The thickness variation resulted in a strong ( approximately 2000 cm(-1)) blue-shift and broadening of the spectrum. The result was reproduced on isolated molecules embedded into a PMMA matrix. This effect cannot be explained by a decrease in energy transfer "freedom" alone. We performed a comprehensive comparison of presented and elsewhere published spectra of MEH-PPV polymer and oligomers in different samples: films, solutions, isolated-molecule coatings and standard SMS samples. The comparison allows that the main reason behind the blue shift is conformational disorder, which is largely dependent on the sample. We also discuss some experimental aspects of SMS, such as representativeness of detected molecules, spectral sensitivity of a setup and temperature. Together with differences in sample preparation method, these issues can explain the existing inconsistencies in the literature.     

Interplay of electrostatic and hydrophobic effects with binding of cationic gemini surfactants and a conjugated polyanion: experimental and molecular modeling studies

Understanding factors responsible for the fluorescence behavior of conjugated polyelectrolytes and modulation of their behavior are important for their application as functional materials. The interaction between the anionic poly{1,4-phenylene-[9,9-bis(4-phenoxy-butylsulfonate)]fluorene-2,7-diyl}copolymer (PBS-PFP) and cationic gemini surfactants alpha,omega-(CmH2m+1N+(CH3)2)2(CH2)s(Br-)2 (m-s-m; m=12, s=2, 3, 5, 6, 10, and 12) has been studied experimentally in aqueous solution. These surfactants are chosen to see whether molecular recognition and self-assembly occurs between the oppositely charged conjugated polyelectrolyte and gemini surfactant when the spacer length on the surfactant is similar to the intercharge separation on the polymer. Without surfactants, PBS-PFP exists as aggregates. These are broken up upon addition of gemini surfactants. However, as anticipated, the behavior strongly depends upon spacer length (s). Fluorescence measurements show three surfactant concentration regimes: At low concentrations (<2x10(-6) M) quenching occurs and is most marked with the small spacer 12-2-12; at intermediate concentrations (approximately 2x10(-6)-10(-3) M), fluorescence intensity is constant, with a 12-carbon spacer 12-12-12 showing the strongest fluorescence; above the critical micelle concentration (CMC; approximately 10(-3) M) increases in emission intensity are seen in all cases and are largest with the intermediate spacers 12-5-12 and 12-6-12, where the spacer length most closely matches the distance between monomer units on the polymer. With longer spacer length surfactants, surface tension measurements for concentrations below the CMC reveal the presence of polymer-surfactant aggregates at the air-water interface, possibly reflecting increased hydrophobicity. Above the CMC, small-angle neutron scattering experiments for the 12-6-12 system show the presence of spherical aggregates, both for the pure surfactant and for polyelectrolyte/gemini mixtures. Molecular dynamics simulations help rationalize these observations and show that there is a very fine balance between electrostatic and hydrophobic interactions. With the shortest spacer 12-2-12, Coulombic interactions are dominant, while for the longest spacer 12-12-12 the driving force involves hydrophobic interactions. Qualitatively, with the intermediate 12-5-12 and 12-6-12 systems, the optimum balance is observed between Coulombic and hydrophobic interactions, explaining their strong fluorescence enhancement.     

Different effects of Fe2+ and Fe3+ on conjugated polymer PPESO3: a novel platform for sensitive assays of hydrogen peroxide and glucose

Fe(2+) and Fe(3+) as a redox pair showing different effects on a water-soluble conjugated polymer PPESO(3) is definitely an interesting and useful phenomenon in view of signal transduction and has been utilized to develop sensitive assays of hydrogen peroxide and glucose.     

Facile synthesis of ortho‐Phenylene‐based conjugated polymers through transformation of cross‐conjugated poly(2,3‐diaryl[2]dendralene)s and their optical properties

We studied the facile synthesis of ortho‐phenylene‐based conjugated polymers through transformation of cross‐conjugated polymers having [2]dendralene moiety, poly(2,3‐diaryl[2]dendralene)s ( P1 s), and demonstrated the sequential synthesis of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers from P1 s. P1 s were transformed into cyclohexa‐1,4‐diene‐containing conjugated polymers ( P2 s) through a Diels–Alder reaction. Aromatization of the cyclohexa‐1,4‐diene skeleton was achieved by using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone to give the ortho‐phenylene‐containing conjugated polymers ( P3 s). The ultraviolet–visible and fluorescence spectra of the cross‐conjugated polymers P1 s, and the conjugated polymers P2 s and P3 s indicated that the π–π interactions between the arylene moieties in P2 s were stronger than those in P1 s and P3 s. The synthetic method for P2 s and P3 s offers an effective synthesis of various types of (Z)‐alkene‐ and ortho‐arylene‐containing conjugated polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 827–832     

间位聚亚吡啶基亚乙炔基共轭聚电解质的合成与溶液光物理性质

合成了单体1,4-双(3-磺酰化丙氧基)-2,5-二碘苯与2,6-二乙炔基吡啶,利用Heck-Sonogashira偶联反应制备了间位聚亚吡啶基亚乙炔基共轭聚电解质m-PPYPE-SO3Na,对单体以及聚合物进行了红外光谱与核磁氢谱表征.测试了该共轭聚电解质m-PPYPE-SO3Na的紫外-可见吸收光谱与荧光发射光谱.研究了该共轭聚电解质的溶液光物理性质,发现该聚电解质具有荧光发射的溶剂依赖性以及浓度依赖性,在水溶液中存在聚集.在聚合物溶液浓度为1×10-6mol/L左右时,聚集发射基本消失,说明此时在溶液中聚合物的聚集程度已经比较低.该聚电解质在水溶液中与表面活性剂之间存在一定的相互作用,加入非离子型高分子表面活性剂聚乙烯吡咯烷酮(PVP)的聚合物水溶液荧光显著增强,表明该表面活性剂破坏聚电解质的聚集.该共轭聚电解质的溶液光物理性质表明其具有成为水溶性荧光探针的应用潜力.     

Water-soluble nanoparticles from random copolymer and oppositely charged surfactant, 3a. Nanoparticles of poly(ethylene glycol)-based cationic random copolymer and fatty acid salts

In this report, we investigate the nanoparticle formation between random copolymers (RCPs) of methoxy-poly(ethylene glycol) monomethacrylate (MePEGMA) and (3-(methacryloylamino)propyl)trimethylammonium chloride (MAPTAC) and oppositely charged natural surfactants, sodium oleate and sodium laurate, using turbidimetric titration, steady-state fluorescence, dynamic light scattering, and electron microscopy. Though sodium oleate and sodium laurate are sparingly soluble in water, the nanoparticle complexes formed between the RCPs and these surfactants are soluble in the entire range of compositions studied here, including the stoichiometric electronetural complexes. The spherical nature of these nanoparticle complexes is revealed by electron microscopic (EM) analysis. Dynamic light scattering (DLS) showed that the average diameters of the nanoparticles are in the range 50 to 150 nm, which is supported by EM analysis. Pyrene fluorescence experiments suggested that these soluble nanoparticles have hydrophobic cores, which may solubilize hydrophobic drug molecules. The polarity index (I(1)/I(3)) obtained from the pyrene fluorescence spectra and the conductometric measurements showed that the critical concentration of fatty acid salts needed to obtain nanoparticles are in the order of 10(-4) M. Further, the complexation of such poorly water-soluble amphiphilic surfactants with polymers offers a useful method for the immobilization of hydrophobic compounds towards water-soluble drug carrier formulations. The formation of water-soluble nanoparticles by the self-assembly of fatty acid salts upon interacting with oppositely charged poly(ethylene glycol)-based polyions.     

Protein–induced aggregation of fluorescent conjugated polyelectrolytes with sulfonate groups: Synthesis and its sensing application

Anionically charged fluorescent conjugated polyelectrolytes of poly{[4,7‐(2,1,3‐benzothiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P1 ) and poly{[4,7‐(bis(thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P2 ) were synthesized by Suzuki crosscoupling polymerization in the presence of a palladium catalyst. The conjugated polyelectrolytes with sulfonate groups, as efficient signal amplifying reporters, were carefully designed to be soluble in water over the entire pH range examined and interact with proteins through intermolecular forces. The polymers exhibited blue emission in aqueous solutions but green or red emission in solid form depending on the conjugation length due to intermolecular exciton migration. The anionic conjugated polymers exhibited blue‐to‐green or blue‐to‐red changes in fluorescence upon exposure to charged proteins, indicating that the polymers have potential applications in fluorescent array systems for protein. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

High-efficiency fluorescence quenching of conjugated polymers by proteins

The fluorescence of the water-soluble anionic conjugated polymer, poly[lithium 5-methoxy-2-(4-sulfobutoxy)-1,4-phenylenevinylene] (MBL-PPV), is quenched in dilute aqueous solution by cytochrome c, a small, naturally occurring electron-transfer protein. The large value obtained for the Stern-Volmer constant (K(sv) = 3.2 x 10(8) at pH 7.4, and approximately 10(9) in acidic solutions) is attributed to a combination of two factors: (1) facile ET between the luminescent semiconducting polymer and the protein and (2) the Columb attraction between the oppositely charged polyelectrolytes. This system shows significant potential for biosensor applications.     

The effects of the charge density and structure of the polymer on the dye-binding characteristics of some cationic polyelectrolytes

The interaction of various structurally different water-soluble cationic polyelectrolytes with methyl orange, an anionic dye, has been studied. The changes in the UV-Vis spectra of methyl orange in the presence of methyl and benzyl quaternized polyvinylpyridines and trialkylammonium and triphenylphosphonium salts of polyvinylbenzyl chloride have been used to investigate the effect of the structure on the dye-binding characteristics of the polycations. The results are interpreted in the light of a simple theory of cooperative binding to a linear lattice. The extent of binding of the dye aggregates on the polymers has been calculated. The binding ability of the above-mentioned polyelectrolytes has been found to depend on the nature of the substituent on the polycation. The contribution of the coulombic forces on binding of the dye by these polymers has been emphasized. © 1995 John Wiley & Sons, Inc.     

Perturbation of fluorescence by nonspecific interactions between anionic poly(phenylenevinylene)s and proteins: implications for biosensors

The use of anionic water-soluble conjugated polymers (CPs) for sensing the presence of avidin by use of a biotin-modified fluorescence quencher was studied. The molecules involved in the study included poly[2-methoxy-5-(3'-propyloxysulfonate)-1,4-phenylenevinylene] with either lithium (Li+-MPS-PPV) or sodium (Na(+)-MPS-PPV) countercations, the well-defined oligomer pentasodium 1,4-bis(4'(2",4"-bis(butoxysulfonate)-styryl)-styryl)2-butoxysulfonate-5-methoxybenzene (5R5-), the quenchers N-methyl-4,4'-pyridylpyridinium iodide (mMV+) and [N-(biotinoyl)-N'-(acetyl 4,4'-pyridylpyridinium iodide)] ethylenediamine (BPP+), which contains a molecular recognition fragment (biotin) attached to a unit that accepts an electron from a CP excited state, and the proteins avidin, tau, BSA, and pepsin A. Fluorescence quenching experiments were examined in a variety of conditions. Experiments carried out in water and in ammonium carbonate buffer (which ensures avidin/biotin complexation) reveal that nonspecific interactions between the CP and the proteins cause substantial perturbations on the CP fluorescence. The overall findings are not consistent with a simple mechanism whereby avidin complexation of BPP+ leads to encapsulation of the quencher molecule and recovery of Li+-MPS-PPV fluorescence. Instead, we propose that binding of BPP+ to avidin results in the quenching unit attaching to a positively charged macromolecule. Electrostatic attraction to the negatively charged conjugated polymer results in closer proximity to the quencher. Therefore, more enhanced fluorescence quenching is observed.     

Unique hydrophobic interactions of pyrene in aqueous solution as effected by polyelectrolytes and surfactants

Pyrene substituents covalently bounded to polyelectrolytes show not only excited-state interactions but also unique ground-state interactions in aqueous solution. The pyrene moieties in pyrenesubstituted ionic molecules also show these interactions when aqueous solutions of these molecules are treated with polyelectrolytes or surfactants well below their critical micelle concentrations. These hydrophobic interactions are revealed by changes in absorption, fluorescence, and excitation spectra. The well-resolved vibrational bands in the absorption and excitation spectra of pyrene become somewhat diffuse, whereas monomer fluorescence is reduced and replaced by excimer fluorescence. The rationale for these results is that the pyrene moieties in these ionic solutions seek out hydrophobic locations on the polyelectrolytes or surfactants, where pyrene aggregation is responsible for these interactions and the corresponding changes in spectra.     

Control of interchain contacts, solid-state fluorescence quantum yield, and charge transport of cationic conjugated polyelectrolytes by choice of anion

Simple procedures are provided for exchanging charge-compensating ions in conjugated polyelectrolytes by progressive dilution of the original species and for determining the degree of ion exchange by using X-ray photoelectron spectroscopy. By using these methods, the bromide ions in poly[(9,9-bis(6'-N,N,N-trimethylammoniumbromide)hexyl)fluorene-co-alt-4,7-(2,1,3-benzothiadiazole)]were exchanged with BF4-, CF3SO3-, PF6-, BPh4-, and B(3,5-(CF3)2C6H3)4- (BArF4-). Absorption, photoluminescence (PL), and PL quantum yields (Phi) were measured in different solvents and in solid films cast from methanol. Examination of the resulting trends, together with the spectral bandshapes in different solvents, suggests that increasing the counteranion (CA) size decreases interchain contacts and aggregation and leads to a substantial increase of Phi in the bulk. Size analysis of polymers containing Br- and BArF4- in water by dynamic light scattering techniques indicates suppression of aggregation by BArF4-. Nanoscale current-voltage measurements of films using conducting atomic force microscopy show that hole mobilities and, more significantly, charge injection barriers are CA dependent. These results show that it is possible to significantly modify the optoelectronic properties of conjugated polyelectrolytes by choosing different counterions. A parent conjugated backbone can thus be fine-tuned for specific applications.     

Interaction between the conjugated polyelectrolyte poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer and the lecithin mimic 1-O-(l-Arginyl)-2,3-O-dilauroyl-sn-glycerol in aqueous solution

In this paper, the interaction between the water-soluble conjugated polyelectrolyte poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer and the amino acid glyceride conjugate 1-O-(L-arginyl)-2,3-O-dilauroyl-sn-glycerol dichlorohydrate (a mimic for the phospholipid lecithin) has been studied in aqueous solution by electronic spectroscopy (absorption and fluorescence) and small-angle neutron scattering (SANS). A significant increase in the polymer fluorescence and blue shift in its emission are observed on association with the surfactant. This is suggested to be due to breakup of polymer aggregates. In addition, the spectroscopic and photophysical data suggest this is followed by the vesicle to ribbon transition characteristic of this surfactant, leading to incorporation of single chains of the polymer within mixed polymer-surfactant aggregates. Support for this comes from preliminary SANS measurements, from which evidence for polymer dissolution and formation of two-dimensional structures has been obtained.     

Photoluminescence quenching effects of surface-modified gold nanoparticles on side-chain polymers containing pyridyl H-acceptors with various lateral polarities

In this study, we used photoluminescence (PL) quenching and transmission electron microscopy (TEM) to study the morphological behavior of hydrogen-bonded (H-bonded) supramolecular assemblies of luminescent H-acceptor polymers and H-donor gold nanoparticles (Au NPs). In fluorescence titration experiments, the lateral Me and MeO substituents on the fluorescent H-acceptor side-chain polymers PBOT1–PBOT3 and PBT1–PBT3 exhibited different electron-donating capabilities, thereby inducing different degrees of H-bonding and dipole–dipole interactions, as evidenced by effective fluorescence quenching upon the addition of surface-modified Au NPs bearing acid and acid-free surfactants (AuSCOOH and AuSC10, respectively). Among all of our tested nanocomposites, the highest Stern–Volmer quenching constant (K_SV) was that obtained from the assembly of AuSCOOH with the homopolymer PBOT1. In addition, we developed fittable exponential equations to predict the values of K_SV of other fluorescent polymers (containing various molar ratios of pyridyl conjugated units) when titrated with these NP quenchers. The morphologies observed in the TEM images confirmed that fluorescence quenching resulted from the self-assembly of the supramolecular nanocomposites, mediated by H-bonds between the fluorescent H-acceptors of the polymers and the H-donors of the Au NPs presenting acid-modified surfactants.